Search NASA⌕ Search

SEARCH · Search NASA

Results for “PROPERTY RIGHTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Preparation and mechanical properties of silicon oxycarbide fibers from electrospinning/sol-gel process

Graphical abstract: Ceramic fibers, silicon oxycarbide (SiOC) fibers were demonstrated and showed higher mechanical properties from electrospinning/sol-gel process at 1000 Degree-Sign C. Highlights: Black-Right-Pointing-Pointer SiOC fibers with low cost are promising to substitute the non-oxide fibers. Black-Right-Pointing-Pointer Successful preparation of SiOC fibers by electrospinning/sol-gel process. Black-Right-Pointing-Pointer Confirmation of the designed product using material characterization methods. Black-Right-Pointing-Pointer The SiOC fibers prepared at 1000 Degree-Sign C possess higher strength (967 MPa). -- Abstract: Silicon oxycarbide (SiOC) fibers were produced through the electrospinning of the solution containing vinyltrimethoxysilane and tetraethoxysilane in the course of sol-gel reaction with pyrolysis to ceramic. The effect of the amount of spinning agent Polyvinylpyrrolidone (PVP) on the dope spinnability was investigated. At a mass ratio of PVP/alkoxides = 0.05, the spinning sol exhibited an optimal spinnable time of 50 min and generated a large quantity of fibers. Electrospun fibers were characterized by Fourier transform infrared spectroscopy (FTIR), thermo gravimetric analysis-differential scanning calorimetry (TGA-DSC), scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The SEM results revealed that the SiOC fibers had a smooth surface and dense cross-section, free of residue pores and cracks. The XPS results gave high content of SiC (13.99%) in SiOC fibers. The SiOC fibers prepared at 1000 Degree-Sign C had a high tensile strength of 967 MPa and Young's modulus of 58 GPa.

36 MATERIALS SCIENCE↗

Properties of mortars made by uncalcined FGD gypsum-fly ash-ground granulated blast furnace slag composite binder

Highlights: Black-Right-Pointing-Pointer The mortar with uncalcined FGD gypsum has suitable workability. Black-Right-Pointing-Pointer The strength of mortar with uncalcined FGD gypsum is higher than that of mortar without uncalcined FGD gypsum. Black-Right-Pointing-Pointer The dry shrinkage of mortar with uncalcined FGD gypsum is lower than that of mortar without uncalcined FGD gypsum. Black-Right-Pointing-Pointer The leaching of sulfate ion of mortar is studied. - Abstract: A series of novel mortars were developed from composite binder of uncalcined FGD gypsum, fly ash (FA) and ground granulated blast furnace slag (GGBFS) for the good utilization of flue gas desulphurization (FGD) gypsum. At a fixed ratio (20%) of GGBFS to the composite binder, keeping consistency of the mortar between 9.5 and 10.0 cm, the properties of the composite mortar were studied. The results show that higher water/binder (W/B) is required to keep the consistency when increasing the percentage of FGD gypsum. No obvious influences of the W/B and content of FGD gypsum on the bleeding of paste were observed which keeps lower than 2% under all experimental conditions tried. The highest compressive and flexural strengths (ratio is 20% FGD gypsum, 20% GGBFS and 60% FA) are 22.6 and 4.3 MPa at 28 days, respectively. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) results indicate that massive ettringite crystals and C-S-H gels exist in the hydration products. At 90 days the mortars with FGD gypsum is dramatically smaller drying shrinkage (563-938 micro strain) than that without FGD gypsum (about 2250 micro strain). The release of the SO{sub 4}{sup 2-} from the mortar was analyzed, indicating that the dissolution of sulfate increases with FGD gypsum. The concentration of SO{sub 4}{sup 2-} releasing from the mortar with 10% FGD gypsum is almost equal to that obtained from the mortar without FGD gypsum. The release of SO{sub 4}{sup 2-} from the mortar with 20% FGD gypsum is 9200 mg{center_dot}m{sup -2}, which is lower than that from the mortar with 95% cement clinker and 5% FGD gypsum.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Synthesis and electrochemical properties of nanosized LiFeO{sub 2} particles with a layered rocksalt structure for lithium batteries

Highlights: Black-Right-Pointing-Pointer 40-nm-sized O3-LiFeO{sub 2} exhibits higher discharge capacities and rate characteristics than 400-nm-sized O3-LiFeO{sub 2}. Black-Right-Pointing-Pointer The cation disorder of Li and Fe ions might have affected the electrochemical activity of the O3-LiFeO{sub 2} nanoparticles. Black-Right-Pointing-Pointer A phase change from a layered structure to a cubic structure during electrochemical cycling. Black-Right-Pointing-Pointer The new cubic phase allowed a stable electrochemical reaction between 4.5 and 1.0 V. -- Abstract: Layered rocksalt-type LiFeO{sub 2} particles (O3-LiFeO{sub 2}) with average particle sizes of ca. 40 and 400 nm were synthesized by an ion exchange reaction from {alpha}-NaFeO{sub 2} precursors. X-ray diffraction (XRD) patterns and scanning electron microscopy (SEM) images confirmed the formation of nanosized O3-LiFeO{sub 2}. 40-nm LiFeO{sub 2} exhibited a higher discharge capacity (115 mAh g{sup -1}) than 400-nm LiFeO{sub 2} (80 mAh g{sup -1}), and also had better rate characteristics. The downsizing effect and cation disorder between the lithium and iron layers may have improved the electrochemical activity of the LiFeO{sub 2} particles. Transmission electron microscopy (TEM) observation indicated a phase transition from O3-LiFeO{sub 2} to a cubic lattice system during the electrochemical process. The cubic lithium iron oxide exhibited stable electrochemical reactions based on the Fe{sup 2+}/Fe{sup 3+} and Fe{sup 2+}/Fe{sup 0} redox couples at voltages between 4.5 and 1.0 V. The discharge capacities of 40-nm LiFeO{sub 2} were ca. 115, 210, and 390 mAh g{sup -1} under cutoff voltages of 4.5-2.0 V, 4.5-1.5 V, and 4.5-1.0 V, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of duplex ageing on secondary α precipitates and mechanical properties of the near β-Ti alloy Ti-55531

Highlights: • High strength β-Ti alloys are widely used for their excellent properties. • To reach an excellent combination of strength and ductility, it is attractive to explore the right heat treatment system. • While compared to the conventional single-step ageing process, duplex ageing could change the development and refinement of secondary α precipitations in near/metastable β-Ti alloys resulting varying in performance. • Therefore it is of scientific significance and engineering value to understand the influence of duplex ageing on the formation of secondary α precipitates and mechanical properties for this type of alloy. - Abstract: This paper presents the results of studies on the microstructure and mechanical properties of a near β-Ti alloy processed with different ageing approaches. Influences of intragranular ultrafine α precipitates and grain boundary α layer on mechanical properties in Ti-55531 alloy were analyzed. The results indicate that the precipitation microstructure of the duplex aged alloy exhibits a uniform size and acicular α precipitated orientation shows an angle of approximately 60°. While the morphology of secondary α precipitates in single-step aged samples appear the irregular distribution and heterogeneous size. With the final ageing time increasing, the morphology of intragranular α precipitates and grain boundary α phase brings out a distinct coarsening. The single-step aged alloy can yield a better combination of the ultimate tensile strength (1265 MPa) and ductility (9%). However, the ultimate tensile strength of the duplex aged alloy even reaches 1368 MPa but it breaks at the stage of elastic deformation. The fracture mode of Ti-55531 alloy changes from predominantly dimple fracture in single-step aged samples to predominantly faceted and cleavage type fracture in duplex aged samples causing by the differences of intragranular α precipitates and the interface between grain boundary α layer and intragranular microstructure.

36 MATERIALS SCIENCE↗

Electronic structure and vibrational properties of KRbAl{sub 2}B{sub 2}O{sub 7}

Graphical abstract: With the KRbAl{sub 2}B{sub 2}O{sub 7} powder formed by solid state synthesis (left), Raman spectrum (right upper) and XPS valence electronic states (right lower) were measured, agreed with the first-principles results. Highlights: ► KRbAl{sub 2}B{sub 2}O{sub 7} powder was obtained by solid state synthesis. ► Vibrational properties of KRbAl{sub 2}B{sub 2}O{sub 7} were determined by unpolarized Raman spectrum. ► Electronic structures of KRbAl{sub 2}B{sub 2}O{sub 7} were measured by XPS. ► Experimental electronic structure is consistent with the first-principles result. ► KRbAl{sub 2}B{sub 2}O{sub 7} has a noticeable refractive indices increase and small NLO effects decrease compared to K{sub 2}Al{sub 2}B{sub 2}O{sub 7}. - Abstract: The physical properties of KRbAl{sub 2}B{sub 2}O{sub 7} have been considered in comparison with those of K{sub 2}Al{sub 2}B{sub 2}O{sub 7} and Rb{sub 2}Al{sub 2}B{sub 2}O{sub 7}. The vibrational parameters of KRbAl{sub 2}B{sub 2}O{sub 7} have been measured by Raman spectroscopy as very similar to those of K{sub 2}Al{sub 2}B{sub 2}O{sub 7}. The electronic structures of KRbAl{sub 2}B{sub 2}O{sub 7} have been evaluated by X-ray photoelectron spectroscopy and ab initio computations using CASTEP package. A noticeable refractive indices increase and small decrease of nonlinear optical properties have been found in KRbAl{sub 2}B{sub 2}O{sub 7} in reference to optical parameters of K{sub 2}Al{sub 2}B{sub 2}O{sub 7}.

36 MATERIALS SCIENCE↗

Dynamics of entropic measurement-induced nonlocality in structured reservoirs

We propose the entropic measurement-induced nonlocality (MIN) as the maximal increment of von Neumann entropy induced by the locally non-disturbing measurement, and study its behaviors in both the independent and common structured reservoirs. We present schemes for preserving the MIN, and show that for certain initial states the MIN, including the quantum correlations, can even be enhanced by the common reservoir. Additionally, we also show that the different measures of MIN may give different qualitative characterizations of nonlocal properties, i.e., it is rather measure dependent than state dependent. - Highlights: Black-Right-Pointing-Pointer Features of the entropic measurement-induced nonlocality (MIN). Black-Right-Pointing-Pointer Comparison of MIN with other quantum correlation measures. Black-Right-Pointing-Pointer Enhancement of MIN and other quantum correlations by common reservoir. Black-Right-Pointing-Pointer Relativity of the geometric and entropic MIN measures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

P25 niblet-like coated on large void space TiO{sub 2} nanotubes arrays for high-rate charge-collection and improved photoconversion efficiency

A niblet-like P25-coated large void space TiO{sub 2} nanotubes arrays (PCTs) has been synthesized by decorating P25 nanoparticles on a rapidly-synthesized large void space TiO{sub 2} nanotube arrays (LTAs) with an appropriate hydrothermal treatment approach in a Teflon-lined stainless steel autoclave. Some key factors and probable synthetic mechanisms have been investigated to obtain an optimal route. Exhilaratingly, the as-synthesized PCTs and LTAs show impressive morphologies, structures and very large void space. And the most important is that, compared with LTAs, the decorated PCTs demonstrates significantly improved dye loading and high-rate charge-collection capability and thus leads to a more than double of the solar cell efficiency than that of LTAs (from 1.46% of LTAs to 3.00% of PCTs under simulated AM 1.5 conditions in our case). - Graphical abstract: The top view and cross-section SEM images of obtained electrode materials (LTAs and PCTs), with the schematic diagram (on the right) showing the kinetic advantages of the PCTs in charge collection and transmission. Highlights: Black-Right-Pointing-Pointer A large void space TiO{sub 2} nanotubes arrays (LTAs) was fabricated in not more than 12 h. Black-Right-Pointing-Pointer A niblet-like P25-coated void space TiO{sub 2} nanotubes arrays (PCTs) has been synthesized based on the LTAs. Black-Right-Pointing-Pointer Some key factors, probable synthetic mechanisms and optimal synthetic route are investigated. Black-Right-Pointing-Pointer The PCTs and LTAs show impressive morphologies, structures and greatly improved dye loading capability. Black-Right-Pointing-Pointer The PCTs shows enhanced charge-collection and light scattering properties and double solar cell efficiency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Copper(II)-lanthanide(III) coordination polymers constructed from pyridine-2,5-dicarboxylic acid: Preparation, crystal structure and photoluminescence

A series of 3d-4f heterometallic coordination polymers, formulated as {l_brace} [Cu{sub 3}Ln{sub 2}(pydc){sub 6}(H{sub 2}O){sub 12}]{center_dot}4H{sub 2}O{r_brace} {sub n} [Ln=Tb (1), Eu (2), Dy (3), Ho (4), Lu (5)], {l_brace} [CuNd{sub 2}(pydc){sub 4}(H{sub 2}O){sub 3}]{center_dot}H{sub 2}O{r_brace} {sub n} (6) and {l_brace} [Cu{sub 3}Pr{sub 2}(pydc){sub 6}(H{sub 2}O){sub 13}]{center_dot}4H{sub 2}O{r_brace} {sub n} (7) (where H{sub 2}pydc=pyridine-2,5-dicarboxylic acid), have been hydrothermally prepared by reactions of H{sub 2}pydc ligand with lanthanide ions in the presence of Cu(II) ion. X-ray crystal structure analysis reveals that these compounds exhibit rich structural chemistry. 1-5 are isomorphous and present a two-dimensional network constructed from Ln{sub 2}Cu{sub 2}L{sub 2}(H{sub 2}O){sub 2} SBU rings and CuL{sub 2}(H{sub 2}O) building blocks. In 6, two-dimensional ladder-like layers based on Nd(III) belts and CuL{sub 2}O{sub 2} units are assembled by H{sub 2}pydc ligands into a three-dimensional open framework. Polymer 7 displays a two-dimensional wave-like layer structure containing two distinct ring units, in which a new coordination mode of the pydc{sup 2-} ligand is observed. The results indicate that the coordination flexibility of the pydc{sup 2-} ligand and lanthanide contraction effect play cooperative roles in the formation of coordination polymers with different polymeric architectures. Compounds 1-2 exhibit intense green and red luminescence emission characteristics of Tb(III) and Eu(III), respectively. Furthermore, elemental analyses (EA), infrared spectra (IR) and thermogravimetric analyses (TGA) of these compounds were also studied. - Graphical abstract: Seven 3d-4f heterometallic coordination polymers were synthesized by reactions of H{sub 2}pydc with lanthanide metal ions in the presence of Cu{sup 2+}, the effects of Cu{sup 2+} on the structures and photoluminescent properties of Ln-pydc{sup 2-} systems were investigated. Highlights: Black-Right-Pointing-Pointer Seven 3d-4f heterometallic compounds have been prepared and characterized. Black-Right-Pointing-Pointer 1-5 and 7 are constructed from Ln{sub 2}Cu{sub 2}L{sub 2}(H{sub 2}O){sub 2} rings and CuL{sub 2}(H{sub 2}O) building blocks. Black-Right-Pointing-Pointer One new coordination mode of the pydc{sup 2-} ligand is first observed. Black-Right-Pointing-Pointer 1-2 exhibit intense characteristic luminescence emission spectra of lanthanide ions.

36 MATERIALS SCIENCE↗

Hydrothermal syntheses, crystal structures and luminescence properties of zinc(II) and cadmium(II) coordination polymers based on bifunctional 3,2 Prime :6 Prime ,3 Prime Prime -terpyridine-4 Prime -carboxylic acid

Five new coordination polymers, [Zn{sub 2}(ctpy){sub 2}Cl{sub 2}]{sub n} (1), [Zn{sub 2}(ctpy){sub 2}(ox)(H{sub 2}O){sub 2}]{sub n} (2), [Zn{sub 2}(ctpy)(3-btc)(H{sub 2}O)]{sub n}{center_dot}0.5nH{sub 2}O (3), [Cd(ctpy){sub 2}(H{sub 2}O)]{sub n} (4), [Cd{sub 4}(ctpy){sub 2}(2-btc){sub 2}(H{sub 2}O){sub 2}]{sub n}{center_dot}2nH{sub 2}O (5), (Hctpy=3,2 Prime :6 Prime ,3 Prime Prime -terpyridine-4 Prime -carboxylic acid, H{sub 2}ox=oxalic acid, H{sub 3}(3-btc)=1,3,5-benzenetricarboxylic acid, H{sub 3}(2-btc)=1,2,4-benzenetricarboxylic acid) have been synthesized under hydrothermal conditions and characterized by elemental analysis, IR spectroscopy, and single-crystal X-ray diffraction. Compounds 1-2 are a one-dimensional chain with weak interactions to form 3D supramolecular structures. Compound 3 is a 4-nodal 3D topology framework comprised of binuclear zinc units and (ctpy){sup -} anions. Compound 4 shows two dimensional net. Compound 5 is a (4,5,6)-connected framework with {l_brace}4{sup 4}{center_dot}6{sup 2}{r_brace}{l_brace}4{sup 6}{center_dot}6{sup 4}{r_brace}{sub 2}{l_brace}4{sup 9}{center_dot}6{sup 6}{r_brace} topology. In addition, the thermal stabilities and photoluminescence properties of 1-5 were also studied in the solid state. - Graphical abstract: Five new Zn/Cd compounds with 3,2 Prime :6 Prime ,3 Prime Prime -terpyridine-4 Prime -carboxylic acid were prepared. The photoluminescence and thermal stabilities properties of 1-5 were investigated in the solid state. Highlights: Black-Right-Pointing-Pointer Five new zinc/cadmium metal-organic frameworks have been hydrothermal synthesized. Black-Right-Pointing-Pointer The structural variation is attributed to the diverse metal ions and auxiliary ligand. Black-Right-Pointing-Pointer Compounds 1-5 exhibit 1D ring chain, 2D layer and 3D open-framework, respectively. Black-Right-Pointing-Pointer These compounds exhibit strong solid state luminescence emission at room temperature.

36 MATERIALS SCIENCE↗

Photocatalytic activity and stability of TiO{sub 2} and WO{sub 3} thin films

Photocatalysis represents a viable option for complete degrading the dye molecules resulted in the textile industry, up to products that do not represent environmental threats. The photocatalytic degradation of methyl orange has been investigated using TiO{sub 2}, WO{sub 3} and mixed thin films. The photodegradation efficiency is examined in correlation with the experimental parameters (irradiation time, H{sub 2}O{sub 2} addition and stability), along with the morphology and crystallinity data. The H{sub 2}O{sub 2} addition increases the photodegradation efficiency by providing additional hydroxyl groups and further reducing the recombination of the electron-hole pairs by reacting with the electrons at the catalyst interface. To test the stability of the photocatalytic films in long time running processes, batch series of experiments were conducted using contact periods up to 9 days. The results show that the thin films maintained their photocatalytic properties confirming their stability and viability for up-scaling. Highlights: Black-Right-Pointing-Pointer TiO{sub 2}, WO{sub 3} and mixed thin films Black-Right-Pointing-Pointer We tested the photocatalytic activity and photocatalyst stability over a period up to 9 days of continuous irradiation. Black-Right-Pointing-Pointer The influence of medium pH and oxidizing agent (H{sub 2}O{sub 2}) was analyzed.

36 MATERIALS SCIENCE↗

Synthesis, characterization and magnetic performance of Co-incorporated ordered mesoporous carbons

Highlights: Black-Right-Pointing-Pointer A facile one-pot aqueous self-assembly strategy for the synthesis Co-incorporated ordered mesoporous carbons (Co-OMCs). Black-Right-Pointing-Pointer Co-OMCs exhibit typical ferromagnetic characteristics. Black-Right-Pointing-Pointer Saturation magnetization strength can be easily adjusted by changing the content of cobalt. Black-Right-Pointing-Pointer Carbonization temperatures have significant effects on the structure and magnetic properties of Co-OMCs. -- Abstract: Co-incorporated ordered mesoporous carbon (Co-OMC) with magnetic frameworks has been synthesized via a one-pot self-assembly strategy. The effects of cobalt loading on carbon matrix, adsorption properties and magnetic properties of the resultant mesostructured cobalt/carbon composites were investigated by nitrogen sorption, X-ray diffraction (XRD), transmission electron microscopy (TEM), thermogravimetric analysis (TG) and magnetometer measurements. The results show that the mesoporous composites with a high cobalt content (such as 18.0 wt%) possess an ordered and uniform mesoporous structure (5.3 nm), high surface areas (up to 687 m{sup 2}/g) and high pore volumes (up to 0.54 cm{sup 3}/g). Cobalt nanoparticles of size 4-9 nm are confined inside the mesopores or walls of the mesoporous carbon. These materials exhibit typical ferromagnetic characteristics. The saturation magnetization strength can be easily adjusted by changing the content of cobalt. The carbonization temperatures have significant effects on the structure and magnetic properties of Co-OMC also.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mixed hyperbolic-second-order-parabolic formulations of general relativity

Two new formulations of general relativity are introduced. The first one is a parabolization of the Arnowitt-Deser-Misner formulation and is derived by the addition of combinations of the constraints and their derivatives to the right-hand side of the Arnowitt-Deser-Misner evolution equations. The desirable property of this modification is that it turns the surface of constraints into a local attractor because the constraint propagation equations become second-order parabolic independently of the gauge conditions employed. This system may be classified as mixed hyperbolic--second-order parabolic. The second formulation is a parabolization of the Kidder-Scheel-Teukolsky formulation and is a manifestly mixed strongly hyperbolic--second-order-parabolic set of equations, bearing thus resemblance to the compressible Navier-Stokes equations. As a first test, a stability analysis of flat space is carried out and it is shown that the first modification exponentially damps and smoothes all constraint-violating modes. These systems provide a new basis for constructing schemes for long-term and stable numerical integration of the Einstein field equations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Magnetosonic waves adjacent to the plasma sheet in the distant magnetotail - ISEE-3

The presence of large-amplitude magnetosonic waves in the distant plasma sheet boundary layers is demonstrated, and their properties are discussed. The waves for almost all the events examined are right-hand circularly polarized, with the degree of polarization varying from 1.04 to 1.87, i.e., from circular to slightly elliptical. The waves are all propagating nearly along the magnetic field. Their periods vary from 3.7 seconds to as long as 35 seconds, with a median value of about 10 seconds, and are slightly larger than the proton gyroperiod in all but two cases. Most waves have a relatively large compressional component varying from 30 to 90 percent of the wave amplitude. Several possible generation mechanisms are discussed, along with the role that the waves may play in the heating and expansion of the plasma sheet.

Tsurutani, B. T.↗

Detection of elliptical polarization and mode splitting in discrete Schumann resonance excitations

Elliptical polarization and mode splitting have been detected in the magnetic component of discrete, well defined Schumann resonance excitations. These ELF excitations, which are large electromagnetic transients of approximately 1 s duration, are called Q-bursts and typically occur every few minutes. They are believed to be the signature of the impulsive excitation of the earth-ionosphere cavity by ultra-large lightning currents. In this paper the magnetic polarization and spectral characteristics of four large Q-bursts are examined in detail using a new analysis technique. Two events display right-hand polarization and two display left-hand polarization. The theoretical polarization properties of the central and side multiplets of the Schumann resonances are used to define a local orthogonal coordinate system in the measurement frame in which these components may be separated. Maximum entropy spectrums computed separately for what are identified to be the central and side multiplets in this coordinate system show distinctly different eigenfrequencies for the lowest mode near 7.5 Hz. For the limited number of cases examined the magnitude of the line splitting detected using this technique is roughly 1.4-1.8 Hz, larger by nearly a factor of two than theoretical or observed values of the splitting previously reported. The frequencies of the side multiplets may lie either above or below the frequency of the central multiplet.

Sentman, D. D.↗

Multi-scale variation in spatial heterogeneity for microbial community structure in an eastern Virginia agricultural field

To better understand the distribution of soil microbial communities at multiple spatial scales, a survey was conducted to examine the spatial organization of community structure in a wheat field in eastern Virginia (USA). Nearly 200 soil samples were collected at a variety of separation distances ranging from 2.5 cm to 11 m. Whole-community DNA was extracted from each sample, and community structure was compared using amplified fragment length polymorphism (AFLP) DNA fingerprinting. Relative similarity was calculated between each pair of samples and compared using geostatistical variogram analysis to study autocorrelation as a function of separation distance. Spatial autocorrelation was found at scales ranging from 30 cm to more than 6 m, depending on the sampling extent considered. In some locations, up to four different correlation length scales were detected. The presence of nested scales of variability suggests that the environmental factors regulating the development of the communities in this soil may operate at different scales. Kriging was used to generate maps of the spatial organization of communities across the plot, and the results demonstrated that bacterial distributions can be highly structured, even within a habitat that appears relatively homogeneous at the plot and field scale. Different subsets of the microbial community were distributed differently across the plot, and this is thought to be due to the variable response of individual populations to spatial heterogeneity associated with soil properties. c2003 Federation of European Microbiological Societies. Published by Elsevier Science B.V. All rights reserved.

NASA Discipline Life Support Systems↗

New York Marcellus Shale: Industry boom put on hold

Key catalysts for Marcellus Shale drilling in New York were identified. New York remains the only state in the nation with a legislative moratorium on high-volume hydraulic fracturing, as regulators and state lawmakers work to balance the advantages of potential economic benefits while protecting public drinking water resources and the environment. New York is being particularly careful to work on implementing sufficiently strict regulations to mitigate the environmental impacts Pennsylvania has already seen, such as methane gas releases, fracturing fluid releases, flowback water and brine controls, and total dissolved solids discharges. In addition to economic and environmental lessons learned, the New York Department of Environmental Conservation (DEC) also acknowledges impacts to housing markets, security, and other local issues, and may impose stringent measures to mitigate potential risks to local communities. Despite the moratorium, New York has the opportunity to take advantage of increased capital investment, tax revenue generation, and job creation opportunities by increasing shale gas activity. The combination of economic benefits, industry pressure, and recent technological advances will drive the pursuit of natural gas drilling in New York. We identify four principal catalysts as follows: Catalyst 1: Pressure from Within the State. Although high-volume hydraulic fracturing has become a nationally controversial technology, shale fracturing activity is common in every U.S. state except New York. The regulatory process has delayed potential economic opportunities for state and local economies, as well as many industry stakeholders. In 2010, shale gas production accounted for $18.6 billion in federal royalty and local, state, and federal tax revenues. (1) This is expected to continue to grow substantially. The DEC is under increased pressure to open the state to the same opportunities that Alabama, Arkansas, California, Colorado, Kansas, Louisiana, Montana, New Mexico, North Dakota, Ohio, Oklahoma, Pennsylvania, South Dakota, Texas, Utah, West Virginia, and Wyoming are pursuing. Positive labor market impacts are another major economic draw. According to the Revised Draft SGEIS on the Oil, Gas and Solution Mining Regulatory Program (September 2011), hydraulic fracturing would create between 4,408 and 17,634 full-time equivalent (FTE) direct construction jobs in New York State. Indirect employment in other sectors would add an additional 29,174 FTE jobs. Furthermore, the SGEIS analysis suggests that drilling activities could add an estimated $621.9 million to $2.5 billion in employee earnings (direct and indirect) per year, depending upon how much of the shale is developed. The state would also receive direct tax receipts from leasing land, and has the potential to see an increase in generated indirect revenue. Estimates range from $31 million to $125 million per year in personal income tax receipts, and local governments would benefit from revenue sharing. Some landowner groups say the continued delay in drilling is costing tens of thousands of jobs and millions of dollars in growth for New York, especially in the economically stunted upstate. A number of New York counties near Pennsylvania, such as Chemung, NY, have experienced economic uptick from Pennsylvania drilling activity just across the border. Chemung officials reported that approximately 1,300 county residents are currently employed by the drilling industry in Pennsylvania. The Marcellus shale boom is expected to continue over the next decade and beyond. By 2015, gas drilling activity could bring 20,000 jobs to New York State alone. Other states, such as Pennsylvania and West Virginia, are also expected to see a significant increase in the number of jobs. Catalyst 2: Political Reality of the Moratorium. Oil and gas drilling has taken place in New York since the 19th century, and it remains an important industry with more than 13,000 currently active wells. The use of hydraulic fracturing in particular has been employed for decades. Yet, as technological advancements have enabled access to gas in areas where drilling is not common practice, public concern has ballooned. Opponents argue that more oversight is necessary to protect the environment and public health, while supporters believe the industry is already adequately regulated. Although it is important for New York to complete a thorough environmental and regulatory review, an extended ban could lead to litigation by property owners who have been stripped of the ability to lease their mineral rights. Other states are moving forward by implementing legislative guidelines or rules created by commissions to ensure that resources are developed safely. One of the most controversial issues in other states to date has revolved around the public disclosure of chemical additives in drilling fluid. While the industry is hesitant to reveal trade secrets, the public and many officials want the security of knowing what chemicals are pumped into the ground. Industry transparency could help mitigate the public concern and controversy that is delaying a lift of the moratorium. Currently, at least five other states have set chemical disclosure rules. Arkansas, Michigan, Montana, Texas, and Wyoming require disclosure of the chemical components of drilling fluid. Colorado has the most stringent rules, requiring not just the disclosure of the additives but of their concentrations as well. As more states continue to allow hydraulic fracturing, New York will likely lift the moratorium and instead implement more stringent regulations that help to alleviate public concern surrounding hydraulic fracturing. This will allow the state to safely pursue the expansive opportunities offered by the Marcellus shale without falling behind economically. Catalyst 3: Energy and Infrastructure Benefits. Natural gas provides a key source of energy in the Northeast. The DEC estimates the Marcellus shale gas resource potential to be between 168-516 Tcf. Even at the low end of this range, Marcellus alone could supply seven years of total U.S. energy consumption, and it would provide a local resource for New York. One report suggests that savings from lower natural gas costs would result in an average annual savings of $926 per household. (4) Industry growth is leading to lower natural gas and electric power prices, while decreasing reliance on Liquid Natural Gas (LNG) imports and enhancing domestic energy security. This makes development of the resources an even more attractive commitment to New York. In addition, the natural gas business is predominantly regional in scope. Drilling companies would be required to build new pipelines for gas development in New York, therefore State regulators face valuable ancillary benefits of natural gas development such as infrastructure improvements. Catalyst 4: Technology Improvements. Lastly, the moratorium itself does not prevent the use of alternative drilling technologies, such as non-hydraulic fracturing, for shale gas production. Developers are already using new systems in Texas and Canada, as well as in France where hydraulic fracturing is banned country-wide. Commercial viability of these new technologies could ultimately provide an alternative to jumpstart shale drilling in New York if necessary. The potential benefits from development of the Marcellus shale in New York are undeniable, though regulators are still working to balance the need to stimulate the economy with environmental protection and public health. Since closing the public comment period in January, the DEC has signaled that much more work is needed, making no promises to near-term completion. While, neighboring states are feeling the economic benefits of drilling, the political environment and the recession continues adding pressure to the process in New York state.

03 NATURAL GAS↗

Growth control of oxygen stoichiometry in homoepitaxial SrTiO 3 films by pulsed laser epitaxy in high vacuum

In many transition metal oxides, oxygen stoichiometry is one of the most critical parameters that plays a key role in determining the structural, physical, optical, and electrochemical properties of the material. However, controlling the growth to obtain high quality single crystal films having the right oxygen stoichiometry, especially in a high vacuum environment, has been viewed as a challenge. In this work, we show that, through proper control of the plume kinetic energy, stoichiometric crystalline films can be synthesized without generating oxygen defects even in high vacuum. We use a model homoepitaxial system of SrTiO 3 (STO) thin films on single crystal STO substrates. Physical property measurements indicate that oxygen vacancy generation in high vacuum is strongly influenced by the energetics of the laser plume, and it can be controlled by proper laser beam delivery. Thus, our finding not only provides essential insight into oxygen stoichiometry control in high vacuum for understanding the fundamental properties of STO-based thin films and heterostructures, but it expands the utility of pulsed laser epitaxy of other materials as well.₃

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗