Search NASA⌕ Search

SEARCH · Search NASA

Results for “Phase field model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Simulations of irradiated-enhanced segregation and phase separation in Fe–Cu–Mn alloys

For reactor pressure vessel steels, the addition of Cu, Mn, and Ni has a positive effect on mechanical, corrosion and radiation resistance properties. However, experiments show that radiation-enhanced segregation and/or phase separation is one of important material property degradation processes. In this work, we developed a model integrating rate theory and phase-field approaches to investigate the effect of irradiation on solute segregation and phase separation. The rate theory is used to describe the accumulation and clustering of radiation defects while the phase-field approach describes the effect of radiation defects on phase stability and microstructure evolution. The Fe-Cu-Mn ternary alloy is taken as a model system. The free energies used in the phase-field model are from CALPHAD. Spatial dependent radiation damage from atomistic simulations is introduced into the simulation cell for a given radiation dose rate. The radiation effect on segregation and phase separation is taken into account through the defect concentration dependence of solute mobility. With the model the effect of temperatures and radiation rates on Cu and Mn segregation and Cu-rich phase nucleation are systematically investigated. The segregation and nucleation mechanisms are analyzed. The simulations demonstrated that the nucleus of Cu precipitates has a core-shell composition profile, i.e., Cu rich at center and Mn rich at the interface, in good agreement with the theoretical calculation as well as experimental observations.

Li, Boyan↗

Understanding and control of Zener pinning via phase field and ensemble learning

Zener pinning refers to the dispersion of fine particles which influences grain size distribution via movement of grain boundaries in a polycrystalline material. Grain size distribution in polycrystals has a significant impact on their properties including physical, chemical, mechanical, and optical to name a few. We explore the use of Phase-field modeling and machine-learning techniques to understand and improve the control of grain size distribution via Zener pinning in polycrystalline materials. We develop a machine learning model that determines the relative importance of various parameters to exercise microstructure control via Zener pinning. Our workflow combines high-throughput phase-field simulations and machine learning to address the computational bottlenecks associated with large-scale simulations as well as identify features necessary for microstructure control in polycrystals. A random forest (RF) regression model was developed to predict grain sizes based on five Phase-field model parameters, achieving an average prediction error of 0.72 nm for the training data and 1.44 nm for the test data. The importance of the input parameters is analyzed using the SHapley Additive exPlanations (SHAP) approach which reveals that diffusivity, volume fraction, and particle diameter are the most important parameters in determining the final grain size. These findings will allow us to select the best second-phase particles, optimize grain size distributions and thus design microstructures with the desired properties. The developed method is a highly versatile and generalizable approach that can be used to assess the combined effects of individual features in the presence of multiple variables.

36 MATERIALS SCIENCE↗

Development of a UO2 Densification Model in the MARMOT Tool

A phase-field model for irradiation-enhanced densification is currently under development in the NEAMS code MARMOT. To begin, a simplified model of sintering without irradiation effects is developed. This model requires a method to generate sintering initial conditions, and the accepted phase-field rigid-body motion sintering model must either be fully implemented in MARMOT or shown to be unnecessary. It is shown to be unnecessary. Sintering simulation results without rigid body motion are shown. Shortcomings in the results are discussed and plans on how to address them are presented.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Three-dimensional Phase-field Simulation of Domain Structures in Ferroelectric Islands

A three-dimensional phase-field model was developed for studying the domain structures and their evolution in ferroelectric islands attached onto a substrate. It simultaneously takes into account the long-range interactions such as electric and elastic interactions, substrate constraint, as well as the stress relaxation caused by the surfaces of an island. As an example, we studied the domain structures of PbZr0.2Ti0.8O3 islands. It was demonstrated that the domain structures of ferroelectric islands could be dramatically different from those of continuous thin films due to the relief of substrate constraint. The stress distribution inside islands is highly dependent on the aspect ratio, i.e., lateral dimension over island thickness, which provides us a new way for engineering the domain structures of ferroelectric materials. The effect of electrostatic energy on the domain structures of ferroelectric islands was also discussed.

36 MATERIALS SCIENCE↗

Thermodynamics of nanodomain formation and breakdown in Scanning Probe Microscopy: Landau-Ginzburg-Devonshire approach

Thermodynamics of tip-induced nanodomain formation in scanning probe microscopy of ferroelectric films and crystals is studied using the analytical Landau-Ginzburg-Devonshire approach and phase-field modeling. The local redistribution of polarization induced by the biased probe apex is analyzed including the effects of polarization gradients, field dependence of dielectric properties, intrinsic domain-wall width, and film thickness. The polarization distribution inside a 'subcritical' nucleus of the domain preceding the nucleation event is shown to be 'soft' (i.e., smooth without domain walls) and localized below the probe, and the electrostatic field distribution is dominated by the tip. In contrast, polarization distribution inside a stable domain is 'hard' (i.e., sharp contrast with delineated domain walls) and the spontaneous polarization reorientation takes place inside a localized spatial region, where the absolute value of the resulting electric field is larger than the thermodynamic coercive field. The calculated coercive biases corresponding to formation of switched domains are in a good agreement with available experimental results for typical ferroelectric materials. The microscopic origin of the observed domain-tip elongation in the region where the probe electric field is much smaller than the intrinsic coercive field is the positive depolarization field in front of the moving-counter domain wall. For infinitely thin domain wall the depolarization field outside the semiellipsoidal domain tip is always higher than the intrinsic coercive field that must initiate the local domain breakdown through the sample depth while the domain length is finite in the energetic approach evolved by Landauer and Molotskii (we refer the phenomenon as Landauer-Molotskii paradox). Our approach provides the solution of the paradox: the domain vertical growth should be accompanied by the increase in the charged domain-wall width.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Optical creation of a supercrystal with three-dimensional nanoscale periodicity

Stimulation with ultrafast light pulses can realize and manipulate states of matter with emergent structural, electronic and magnetic phenomena. However, these non-equilibrium phases are often transient and the challenge is to stabilize them as persistent states. Here, we show that atomic-scale PbTiO 3 /SrTiO 3 superlattices, counterpoising strain and polarization states in alternate layers, are converted by sub-picosecond optical pulses to a supercrystal phase. This phase persists indefinitely under ambient conditions, has not been created via equilibrium routes, and can be erased by heating. X-ray scattering and microscopy show this unusual phase consists of a coherent three-dimensional structure with polar, strain and charge-ordering periodicities of up to 30 nm. By adjusting only dielectric properties, the phase-field model describes this emergent phase as a photo-induced charge-stabilized supercrystal formed from a two-phase equilibrium state. Furthermore our results demonstrate opportunities for light-activated pathways to thermally inaccessible and emergent metastable states.

36 MATERIALS SCIENCE↗

Niobium hydride formation in superconducting qubit thin films

The formation of nonsuperconducting hydrides in 160–170-nm-thick films of niobium is examined. We identify six elastically distinct orientation relationships ɛ−Nb 4 ⁢H 3 takes within the matrix, solid-solution 𝛼−NbH 𝑥 phase. We employ a phase field model to assess the impact of elastic energy induced by the strain of phase transformation on the morphology and transformation dynamics of ɛ precipitates within a thin film. We consider the dimensions of the thin film, crystallographic growth direction, and diffusion rates to predict the timescale of hydride evolution. Leveraging the finite element method, we predict two-dimensional and three-dimensional equilibrium shapes of ɛ-hydrides within a bulk sample and in a thin film that has a traction-free surface. Our results suggest that niobium hydrides migrate to the free surface of the film. Precipitates which reach the free surface coarsen, while precipitates within the film dissolve. Precipitates in both two dimensions and three dimensions experience a repulsive interaction force at the free surface, that is attractive in the bulk, shown in experiment and theory of previous studies.

36 - MATERIALS SCIENCE↗

Holistic Microstructure Control Strategies in Photopolymerization‐Induced Phase Separation of Acrylate Systems

Open porous materials, known for their large surface area and interconnected structures, are essential in various applications, including batteries, ion exchange, catalysis, filtration, and electronic waste recycling. A critical aspect of the functionality of porous membranes is the precise control of pore size and morphology. Photopolymerization-induced phase separation (photo-PIPS) offers a convenient and versatile methods for creating porous structures. However, controlling the porous morphology remains challenging due to the complex interplay between thermodynamics, polymerization kinetics, and monomer structures, which makes it difficult to establish the relationship between processing conditions and resulting morphology in photo-PIPS. Herein, a physics-based phase-field model capable of generating and characterizing the microstructures of porous materials based on both average and localized features is developed. Using the phase-field simulations as test bed, the effects of polarity, light intensity, and curing temperature, as well as the previously unexplored roles of chain transfer agents and substrates, on the morphology of the resulting porous microstructure are investigated. Experiments are performed to verify the results predicted by the simulations. This work lays out a comprehensive guide for designing PIPS-derived porous microstructures and offers practical engineering strategies for tailoring microstructure-level topology and size of pores for application-specific needs.

36 MATERIALS SCIENCE↗