SEARCH · Search NASA

Results for “Phase morphology”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

All sources NASA NTRS DOE OSTI

NASA NTRS1994

Crystallization Kinetics of Barium and Strontium Aluminosilicate Glasses of Feldspar Composition

Crystallization kinetics of BaO.Al2O3.2SiO2 (BAS) and SrO.Al2O3.2SiO2 (SAS) glasses in bulk and powder forms have been studied by non-isothermal differential scanning calorimetry (DSC). The crystal growth activation energies were evaluated to be 473 and 451 kJ/mol for bulk samples and 560 and 534 kJ/mol for powder specimens in BAS and SAS glasses, respectively. Development of crystalline phases on thermal treatments of glasses at various temperatures has been followed by powder x-ray diffraction. Powder samples crystallized at lower temperatures than the bulk and the crystallization temperature was lower for SAS glass than BAS. Crystallization in both glasses appeared to be surface nucleated. The high temperature phase hexacelsian, MAl2Si2O8 (M = Ba or Sr), crystallized first by nucleating preferentially on the glass surface. Also, monoclinic celsian does not nucleate directly in the glass, but is formed at higher temperatures from the transformation of the metastable hexagonal phase. In SAS the transformation to monoclinic celsian occurred rapidly after 1 h at 1100 C. In contrast, in BAS this transformation is sluggish and difficult and did not go to completion even after 10 h heat treatment at 1400 C. The crystal growth morphologies in the glasses have been observed by optical microscopy. Some of the physical properties of the two glasses are also reported.

Hyatt, Mark J.↗

NASA NTRS1995

The life cycle of the Interstellar Medium in other galaxies

Gas in spiral galaxies cycles between the diffuse and dense phases as clouds collapse, form stars and are dispersed back into the ISM. Far infrared observations of continuum emission from interstellar dust and line emission from interstellar gas have revealed a wealth of information on the state of the ISM in galaxies of different morphological types. The analysis of these observations gives us information about the processes of star formation and about the evolution of the ISM. Star formation rates vary widely from galaxy to galaxy, with the rates in starburst galaxies being 10 - 100 times those in quiescent spiral galaxies. Far infrared spectroscopy of star-forming galaxies shows that the interstellar pressure increases with star formation rate. The structure of the interstellar medium in starburst galaxies is quite different from that of quiescent galaxies - much of the mass and volume are in HII regions and photodissociation regions. The size distribution of dust grains seems to depend on environment; small grains are abundant in the diffuse interstellar medium but not in dense molecular star forming regions. Quiescent spiral and elliptical galaxies contain a significant population of small grains, but starburst galaxies do not. Dwarf irregular galaxies also seem to contain few small grains; this may be the result of the higher UV flux in these galaxies. The star forming regions in dwarf irregulars also have a higher ratio of atomic to molecular gas than do those in the Galaxy. These results show that the ISM in galaxies of different morphological types reaches different equilibria, resulting in different modes of star formation and global galaxy evolution.

Knapp, G. R.↗

NASA NTRS1981

A quantitative study of factors influencing lamellar eutectic morphology during solidification

The factors that influence the shape of the solid-liquid interface of a lamellar binary eutectic alloy are evaluated. Alloys of carbon tetrabromide and hexachloroethane which serve as a transparent analogue of lamellar metallic eutectics are used. The observed interface shapes are analyzed by computer-aided methods. The solid-liquid interfacial free energies of each of the individual phases comprising the eutectic system are measured as a function of composition using a 'grain boundary groove' technique. The solid-liquid interfacial free energy of the two phases are evaluated directly from the eutectic interface. The phase diagram for the system, the heat of fusion as a function of composition, and the density as a function of composition are measured. The shape of the eutectic interface is controlled mainly by the solid-liquid and solid-solid interfacial free energy relationships at the interface and by the temperature gradient present, rather than by interlamellar diffusion in the liquid at the interface, over the range of growth rates studied.

Kaukler, W. F. S.↗

NASA NTRS1979

The role of NaCl in flame chemistry, in the deposition process, and in its reactions with protective oxides as related to hot corrosion

Sodium chloride is believed to be the primary source of turbine engine contamination that contributes to hot corrosion. The behavior of NaCl-containing aerosols ingested with turbine intake air is very complex; some of the NaCl may vaporize during combustion while some may remain as particulates. The NaCl can lead to Na2SO4 formation by several possible routes or it can contribute to corrosion directly. Hydrogen or oxygen atom reaction with NaCl(c) was shown to result in the release of Na(g). Gaseous NaCl in flames can be partially converted to gaseous Na2SO4 by homogeneous reactions. The remaining gaseous NaCl and other Na-containing molecules can act as sodium carriers for condensate deposition of Na2SO4 on cool surfaces. A frozen boundary layer theory was developed to predict the rates of deposition. The condensed phase NaCl can be converted directly to condensed Na2SO4 by reaction with sulfur oxides and O2. Reaction of gaseous NaCl with Cr2O3 results in the vapor phase transport of chromium by the formation of complex Cr-containing gaseous molecules. Similar gaseous complexes are formed with molybdenum. The presence of gaseous NaCl was shown to affect the oxidation kinetics of Ni-Cr alloys. It also causes changes in the surface morphology of Al2O3 scales formed on Al-containing alloys.

Kohl, F. J.↗

NASA NTRS1979

Voyager spacecraft radio observations of Jupiter - Initial cruise results

Low frequency (below 1326 kHz) observations of Jupiter obtained from November, 1977 through June, 1978 by the radio astronomy receivers carried by the two Voyager spacecraft are reported and compared with a large body of higher-frequency ground-based observations. Although the morphology of hectometric wavelength (HOM) emissions strongly resembles that of decametric (DAM) wavelength radio noise, they display opposite polarization. DAM emissions are strongly modulated by Io, whereas HOM emissions exhibit little or no influence from any satellite and appear to be modulated by the rotation phase of the planet. Several single-source models could possibly account for these results, including a model assuming emission at two well-separated frequencies above and below the local electron plasma frequency and the model proposed by Barbosa (1976) in which electrostatic waves at twice the upper hybrid frequency couple to both the ordinary and extraordinary electromagnetic modes. However, neither of these is entirely satisfactory.

Kaiser, M. L.↗

NASA NTRS1980

Self-gravitating gas flow in barred spiral galaxies

A series of two-dimensional numerical experiments is performed in order to test the response of an isothermal, self-gravitating gas disk to a uniformly rotating, barlike gravitational potential. The barlike potential is an equilibrium stellar model from the n-body calculations of Miller and Smith (1979). In the bar-dominated, central regions of the disk, a gas bar whose phase depends primarily on the location of principal resonances in the disk is formed. This response can be understood in terms of orbit-crowding effects. In the gas-dominated outer regions of the disk, two-armed trailing spiral waves are formed. The local pitch angle of these waves increases with increasing fractional gas mass. These self-gravitating gas waves are not self-sustaining. They are driven from the ends of equilibrium stellar bars, and their phase does not depend on the location of resonances in the disk. The relevance of these self-gravitating waves to observations and models of barred spiral galaxies is discussed. It is concluded that these waves and their associated ringlike structures may be consistent with the morphological distribution of gas features in barred spiral galaxies.

Huntley, J. M.↗

NASA NTRS1995

Ultraviolet radiation from evolved stellar populations. 2: The ultraviolet upturn phenomenon in elliptical galaxies

We discuss the far-ultraviolet upturn phenomenon (UVX) observed in elliptical galaxies and spiral galaxy bulges. Our premise is the UV radiation from these systems emanates primarily from extreme horizontal branch (EHB) stars and their progeny. We derive the broad-band UV colors 1500-V and 2500-V for globular clusters and elliptical galaxies from the available satellite data and investigate color-color and color-line strength correlation. Clusters can be bluer than any galaxy in 15-V and 25-V, implying larger hot star populations, but galaxies are significantly bluer than clusters in 15-25 at a given 15-V. We attribute this primarily to the effect of metal abundance on the mid-UV (2500 A) light. These redder colors of the galaxies also imply that the UVX in galaxies is not produced by metal-poor subpopulations similar to the clusters. We devlop a simple spectral synthesis formulation for all phases of single star evolution from the zero-age main sequence (ZAMS) to the white dwarf cooling track that requires only one or two parameters for each choice of age and abundance. We provide the ingredients necessary for constructing models with arbitrary horizontal branch (HB) morphologies in the age range 2 less than t less than 20 Gyr and for six metallicities in the range -2.26 less than (Fe/H) less than 0.58; we also consider the efect of enhanced Y in metal-rich models. The maximum lifetime UV output is produced by EHB stars with (M(sub env))(sup 0) approximately 0.02 solar mass and can be up to 30 times higher than for post-asymptotic giant branch (P-AGB) stars. The ultraviolet output of old populations is governed primarily by the distribution of (M(sub env))(sup 0)P(M(sub env))(sup 0), on the ZAHB. The UV output is not very sensitive to (Fe/H) or to Y, but it can change very rapidly with (M(sub env))(sup 0). Thus it is extremely sensitive to the precise nature of giant-branch mass loss. Our models use simple descriptions of P(M(sub env))(sup 0) to bracket the colors produced from any real distribution of stars. Our models accurately predict the range of UV colors observed for the globular clusters, given known constraints on their age, abundances, and HB morphologies. We find that models with (Fe/H) greater than or = 0 that do not contain EHB stars cannot reproduce the colors of most of the galaxies. The models also predict that the fraction of the far-UV light from P-AGB stars, which are spatially resolvable in nearby galaxies, is approximately 70% and approximately 20% for moderate UVX and strong UVX systems, respectively. We find that 25-V, but not 15-V, is sensitive to the age and abundance, though these cannot always be cleanly distinguished. The galaxy colors place limits of (Fe/H) greater than -0.5 and less than 15% on the contribution of globular cluster-type populations to the V light. Galaxy colors are consistent with solar-abundance models with ages in the range 6-14 Gyr. We discuss several implications of the observations and the models, including the question of light metal versus iron peak enhancements in galaxies, whether the UV color-Mg(sub 2) correlation is continuous or discrete, effects of helium abundnace on the UVX, and the key question of whether red giant branch mass loss can be large enough to produce the necessary EHB population in the strong UVX galaxies.

Dorman, Ben↗

NASA NTRSDate not supplied

RESIDUAL DEFORMATION ANALYSIS IN COMPOSITE SHELL STRUCTURES MANUFACTURED USING AUTOMATED FIBER PLACEMENT

The manufacturing of composites typically produces residual stresses that can significantly affect the final shape of the structure. The process of automated fiber placement (AFP) has become a prominent manufacturing technique in developing layups with tailored, variable stiffness morphology. The steered patterns of fiber tows with and without overlaps produce residual deformations that are distinctive from traditional layups. Digital image correlation was used to measure the AFP lamina coefficients of thermal expansion, which were incorporated into finite element analyses (FEA) to model the cooling phase of the cure cycle. The effects of nonlinear analysis and temperature-dependent lamina properties calculated using self-consistent field micromechanics, on the resulting residual deformation of shells, were also modeled. The predicted residual deformation was analyzed by considering out-of-roundness in cylindrical shells and compared to the experimental results. The shell FEA results were well-correlated with the overall deformed shape of the AFP cylinder with overlaps, while the shell FEA model of the AFP cylinder without overlaps did not show as good of qualitative match of the deformation pattern. Analytical correlation with measured results were insensitive to material softening at elevated temperatures, geometric nonlinearities, and variations in measured lamina thermal properties. To improve the accuracy of the residual deformation analysis, these results suggest that the thermo-chemical shrinkages preceding the cooldown should be considered, as well as possible variations in ply level microstructure due to the presence of the embedded fiber tow gaps and overlaps.

Composites↗

NASA NTRS1998

Thin Film Mediated Phase Change Phenomena: Crystallization, Evaporation and Wetting

We focus on two distinct materials science problems that arise in two distinct microgravity environments: In space and within the space of a polymeric network. In the former environment, we consider a near eutectic alloy film in contact with its vapor which, when evaporating on earth, will experience compositionally induced buoyancy driven convection. The latter will significantly influence the morphology of the crystallized end member. In the absence of gravity, the morphology will be dominated by molecular diffusion and Marangoni driven viscous flow, and we study these phenomena theoretically and experimentally. The second microgravity environment exists in liquids, gels, and other soft materials where the small mass of individual molecules makes the effect of gravity negligible next to the relatively strong forces of intermolecular collisions. In such materials, an essential question concerns how to relate the molecular dynamics to the bulk rheological behavior. Here, we observe experimentally the diffusive motion of a single molecule in a single polymer filament, embedded within a polymer network and find anomalous diffusive behavior.

Wettlaufer, John S.↗

NASA NTRS1978

The cloudy state of interstellar matter

The expression 'cloudy state' is used to describe the state of the diffuse interstellar matter, with emphasis on its denser and more opaque regions. Questions of morphology with respect to the Galaxy are examined, taking into account neutral hydrogen, molecular regions, H II regions, infrared sources and masers, coronal gas in the Galaxy, and the major components of the interstellar medium. Aspects of dynamics are also considered, giving attention to the two-phase interstellar medium, the three-phase interstellar medium, the density-wave compression of clouds, and problems related to the concept of collapsing clouds. Developments concerning chemistry are explored. Radioactive chronologies are discussed along with isotopic anomalies and aspects of interstellar chemistry.

Clayton, D. D.↗

NASA NTRS1994

Coronal streamers as detected with the SPARTAN 201-01 white light coronagraph

The preliminary results concerning the fine scale structure analysis of the streamers on the east limb and the region between these streamers, as well as their morphological and physical characteristics are presented. The results were obtained using white light polarized brightness data. The solar corona was observed with an externally occulted white light coronagraph carried on the SPARTAN 201-01 spacecraft for a 47 h period beginning on DOY 101, 1993. At this phase of the solar magnetic activity cycle there were well developed coronal helmet streamers located over both the east and west limbs of the sun. The photometric properties of one streamer found near the south east limb of the sun are similar to those measured of helmet streamers at the time of the 1973 total eclipse by both the ground based white light coronal camera and the Skylab externally occulted coronagraph.

Fisher, Richard↗

NASA NTRS1999

Evidence for Ancient Martian Life

Three SNC meteorites ranging in age from 4.5 Ga. to 1.3 Ga. to 165 m.y. contain features suggestive, of past biogenic activity on Mars. Because we do not know what past martian life looks like or its physical or chemical properties, the only tools or criteria which the scientific community have to evaluate evidence of past life is to use evidence for early life on earth. There are features within ALH8400 I's carbonate globules and the pre-terrestrial aqueous alteration phases of Nakhla and Shergotty which have been interpreted as possible evidence for past life on early Mars. Eight criteria have been established for the recognition of past life within terrestrial geologic samples. They are: (a) geologic context; (b) sample's age and stratigraphic location (c) cellular morphology; (d) colonies; (e) biominerals; (f) stable isotope patterns unique to biology; (g) organic biomarkers; (h) indigenous features to the sample. For general acceptance of past life, essentially most or all of these criteria must be met. Studies have shown conclusively that the reduced carbon components in ALH84001 and Nakhla are indigenous to the meteorites and are not terrestrial contaminants Based on carbon isotopic compositions and mineralogical morphologies, there is no question or disagreement that the carbonate globules or embedded magnetites in ALH84001 and the pre-terrestrial aqueous alteration products in Nakhla and Shergotty were formed on Mars. Possible microfossil structures and some reduced carbon components in the carbonates and pre-terrestrial aqueous alteration products are, therefore, almost certainly indigenous, but other possible evidence for life (e.g. amino acids) may be a result of terrestrial contamination Our hypothesis of possible early life on Mars was presented in August 1996. Today, we believe it stands stronger than when originally presented. To date, no fatal strikes have been made to any of our original four lines of evidence. While details of the hypothesis are evolving as new data is generated, we believe that our basic premise remains intact: these meteorites contains evidence suggestive of early life on Mars.

Gibson, Everett K., Jr.↗

NASA NTRS1972

Development of advanced high strength tantalum base alloys. Phase 3: Influence of metallurgical condition on the mechanical properties of ASTAR-811C sheet

Metallurgical condition was shown to have a significant effect on the creep properties of ASTAR-811C (Ta-8W-1Re-0.7Hf-0.025C) sheet. Cold worked material exhibited creep rates 30 times higher than solution annealed material and 10 times greater than for recrystallized material. Both grain size and the carbide morphology changes as the final annealing temperature was raised from 3000 F to 3600 F. However, the lowest creep rates were achieved for material which retained the high temperature form of the Ta2C precipitate. Samples with GTA weldments had essentially identical properties as recrystallized base metal. Cooling rates from 3600 F of 5, 50, and 800 F deg/min. had little effect on the 2000 and 2400 F creep behavior of ASTAR-811C.

Ammon, R. L.↗

NASA NTRS1992

Morphology and composition of condensates on Apollo 17 orange and black glass

Lunar soil sample 74220 and core samples 74001/2 consist mainly of orange glass droplets, droplet fragments, and their crystallized equivalents. These samples are now generally accepted to be pyroclastic ejecta from early lunar volcanic eruptions. It has been known since early examination of these samples that they contain surface coatings and material rich in volatile condensible phases, including S, Zn, F, Cl, and many volatile metals. The volatiles associated with these orange and black glasses (and the Apollo 15 green glasses) may provide important clues in understanding the differentiation and volcanic history of the Moon. In addition, condensible volatiles can be mobilized and concentrated by volcanic processes. We have reviewed many of our existing photomicrographs and energy dispersive analysis (EDXA) of grain surfaces and have reexamined some of our older SEM mounts using an improved EDXA system capable of light-element detection and analysis (oxygen, nitrogen, and carbon). The results from these investigations are presented.

Mckay, David S.↗

NASA NTRS1986

The evolution and growth of Al2O3 scales on beta-NiAl

The formation and growth of Al2O3 scales on (beta)-NiAl were studied using electron microscopy and other analytical techniques to gain an understanding of the oxidation properties of (beta)-NiAl and of alumina-forming alloys, in general. The transient and mature stages of oxidation were studied as well as the transformation stage during which the oxide scale transforms from metastable Al2O3 phases to the thermodynamically stable alpha-Al2O3 phase. The transient oxidation stages were studied at 800 deg C and for short times at 1100C. At 800C, the scales consist predominantly of delta-Al2O3 which forms by cation vacancy ordering in the defective spinel lattice of gamma-Al2O3. At 1100C, a fast-growth morphology of theta-Al2O3 forms as a surface layer over delta-Al2O3. For both oxidation temperatures, the scales are often epitaxially oriented with respect to the metal. The transient scales grow by outward cation diffusion as evidenced by surface growth morphologies. The transformation to alpha-Al2O3 occurs within 1 hour at 1100C by a nucleation and radial growth process. The large volume decrease associated with the transformation results in a highly strained alpha-Al2O3 microstructure. A change in scale growth mechanism from outward cation to inward anion diffusion allows transient surface morphologies to be smoothed by surface diffusion. The mature stage of oxidation involves the growth of an alpha-Al2O3 scale having the lacey morphology formed as a result of the gamma yields alpha transformation. Growth of the scale occurs by counterdiffusion along grain boundaries resulting in ridges formed by impingement of alpha-Al2O3 nuclei during the transformation stage. Also scale growth occurs by inward oxygen diffusion through healed cracks; the cracks result from transformation stresses. The measured growth rates of scales having the lacey morphology are an order of magnitude less than fine-grained alpha-Al2O3 scales. Metal orientations were found to have a large effect on oxide morpholoies during all stages of oxidation.

Doychak, J. K.↗

NASA NTRS2001

A Study of Supernova Remnants with Center-Filled X-Ray Morphology

The proposed study entails use of archival data, primarily from past and active X-ray observatories, to study the properties of a class of supernova remnants (SNRs) which display a centrally-bright X-ray morphology. Several models which have been proposed to explain the morphology are being investigated for comparisons with measured characteristics of several remnants: nonthermal emission from a central synchrotron nebula; thermal emission enhanced by slow evaporation of cool clouds in the hot SNR interior; and relic thermal emission from the SNR interior after the remnant has entered the radiative phase of evolution, thus causing the shell emission to cease.

Slane, Patrick O.↗

NASA NTRS2002

Tensile Properties of Hydrogels and of Snake Skin

Stimulus-responsive or 'smart' gels are of potential interest as sensors and actuators, in industrial separations, and as permeable delivery systems. In most applications, a certain degree of mechanical strength and toughness will be required, yet the large-strain behavior of gels has not been widely reported. Some exceptions include work on gelatin and other food gels, some characterization of soft gels applicable for in-vitro cell growth studies, and toughness determinations on commercial contact lens materials. In general, it can be anticipated that the gel stiffness will increase with increasing degree of crosslinking, but the tensile strength may go through a maximum. Gel properties can be tailored by varying not only the degree of crosslinking, but also the polymer concentration and the nature of the polymer backbone (e.g. its stiffness or solubility). Polypeptides provide an especially interesting case, where secondary structure affects trends in moduli and conformational transitions may accompany phase changes. A few papers on the tensile properties of responsive gels have begun to appear. The responsive hydrogel chosen for the present study, crosslinked hydroxypropylcellulose, shrinks over a rather narrow temperature range near 44 C. Some vertebrate skin is also subject to substantial strain. Among reptiles, the morphologies of the skin and scales show wide variations. Bauer et al. described the mechanical properties and histology of gecko skin; longitudinal tensile properties of snake skin were examined by Jayne with reference to locomotion. The present measurements focus on adaptations related to feeding, including the response of the skin to circumferential tension. Tensile properties will be related to interspecific and regional variation in skin structure and folding.

Hinkley, Jeffrey A.↗

NASA NTRS2002

TIES for Dummies 3rd Edition (Technology Identification, Evaluation, and Selection) Basic how to's to implement the TIES method

The TIES method is a forecasting environment whereby the decision-maker has the ability to easily assess and trade-off the impact of various technologies without sophisticated and time-consuming mathematical formulations. TIES provides a methodical approach where technically feasible alternatives can be identified with accuracy and speed to reduce design cycle time, and subsequently, life cycle costs, and was achieved through the use of various probabilistic methods, such as Response Surface Methodology and Monte Carlo Simulations. Furthermore, structured and systematic techniques are utilized from other fields to identify possible concepts and evaluation criteria by which comparisons can be made. This objective is achieved by employing the use of Morphological Matrices and Multi-Attribute Decision Making techniques. Through the execution of each step, a family of design alternatives for a given set of customer requirements can be identified and assessed subjectively or objectively. This methodology allows for more information (knowledge) to be brought into the earlier phases of the design process and will have direct implications on the affordability of the system. The increased knowledge allows for optimum allocation of company resources and quantitative justification for program decisions. Finally, the TIES method provided novel results and quantitative justification to facilitate decision making in the early stages of design so as to produce affordable and quality products.

Kirby, Michelle R.↗