Search NASA⌕ Search

SEARCH · Search NASA

Results for “Principal”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Space Shuttle solid rocket booster

Details of the design, operation, testing and recovery procedures of the reusable solid rocket boosters (SRB) are given. Using a composite PBAN propellant, they will provide the primary thrust (six million pounds maximum at 20 s after ignition) within a 3 g acceleration constraint, as well as thrust vector control for the Space Shuttle. The drogues were tested to a load of 305,000 pounds, and the main parachutes to 205,000. Insulation in the solid rocket motor (SRM) will be provided by asbestos-silica dioxide filled acrylonitrile butadiene rubber ('asbestos filled NBR') except in high erosion areas (principally in the aft dome), where a carbon-filled ethylene propylene diene monomer-neopreme rubber will be utilized. Furthermore, twenty uses for the SRM nozzle will be allowed by its ablative materials, which are principally carbon cloth and silica cloth phenolics.

Hardy, G. B.↗
NASA NTRS1980

Application of remote sensing to estimating soil erosion potential

A variety of remote sensing data sources and interpretation techniques has been tested in a 6136 hectare watershed with agricultural, forest and urban land cover to determine the relative utility of alternative aerial photographic data sources for gathering the desired land use/land cover data. The principal photographic data sources are high altitude 9 x 9 inch color infrared photos at 1:120,000 and 1:60,000 and multi-date medium altitude color and color infrared photos at 1:60,000. Principal data for estimating soil erosion potential include precipitation, soil, slope, crop, crop practice, and land use/land cover data derived from topographic maps, soil maps, and remote sensing. A computer-based geographic information system organized on a one-hectare grid cell basis is used to store and quantify the information collected using different data sources and interpretation techniques. Research results are compared with traditional Universal Soil Loss Equation field survey methods.

Morris-Jones, D. R.↗
NASA NTRS1981

Global circulation and the solar dynamo

The Sun is apparently rather typical of stars in its spectral class, with a convection zone of substantial depth and a modest rotation rate. These two factors are apparently enough to generate a substantial global circulation, seen so far principally as a differental rotation, as well as a nearly cyclic magnetohydrodynamic dynamo, seen principally as the 22 year "solar cycle". It would be expected therefore that many stars would have such dynamical characteristics. Recent observations of very large scale velocity fields of small velocity amplitude were reviewed.

Gilman, P. A.↗
NASA NTRS1980

Creep rupture behavior of unidirectional advanced composites

A 'material modeling' methodology for predicting the creep rupture behavior of unidirectional advanced composites is proposed. In this approach the parameters (obtained from short-term tests) required to make the predictions are the three principal creep compliance master curves and their corresponding quasi-static strengths tested at room temperature (22 C). Using these parameters in conjunction with a failure criterion, creep rupture envelopes can be generated for any combination of in-plane loading conditions and ambient temperature. The analysis was validated experimentally for one composite system, the T300/934 graphite-epoxy system. This was done by performing short-term creep tests (to generate the principal creep compliance master curves with the time-temperature superposition principle) and relatively long-term creep rupture tensile tests of off-axis specimens at 180 C. Good to reasonable agreement between experimental and analytical results is observed.

Yeow, Y. T.↗
NASA NTRS1980

Cusp proton signatures and the interplanetary magnetic field

The variation of proton average energy with latitude in the cusp has been suggested as an indicator of the means of particle entry. If magnetic merging is the principal means of particle entry, the proton average energy should fall with increasing latitude; if diffusion is the principal means, the average energy should first fall and then briefly rise as a function of latitude, showing a 'V' signature. In the present work, 60 selected cusp passes of the AE-D satellite for which IMP-J interplanetary or magnetosheath magnetic-field data were available were examined. About one-third of these passes showed clear or likely merging-type energy dispersions; a third showed clear or likely V-type energy dispersions, and a third showed unclear or no energy dispersions. The results are strongly correlated with the IMF - the merging signatures are associated with southward IMF and the V signatures with northward IMF. Unclear cases are associated with unsteady or weakly northward IMF.

Reiff, P. H.↗
NASA NTRS1981

Halogen and phosphorus storage in the earth

Chemical analyses of surface reservoirs, coupled with compositions for interior zones inferred from geophysical and geochemical data have been used to obtain a range of estimates of the bulk composition of the earth. It is suggested that (1) apatite with 3 wt% Fe, up to 1 wt% Cl, and 0.003 wt% Br is the principal mineral reservoir for halogens, and mica is a subsidiary reservoir; (2) apatite with 18 wt% P is the principal store of P in the upper mantle and perhaps lower mantle, but accounts for only one-twentieth of P in the earth; and (3) the remaining P is in a reservoir inaccessible to magmatism, and may amount to a maximum of 0.7 wt% in the core.

Smith, J. V.↗
NASA NTRS1980

Observations of the dayside ionopause and ionosphere of Venus

Some of the principal features of the dayside solar wind ionosphere interaction at Venus are presented. The dayside ionopause and ionosphere are observed to respond dramatically to solar wind pressure variations. The ram pressure of the solar wind is manifested mainly as magnetic pressure just external to the subsolar ionopause, and the ionopause location is controlled principally by this pressure. The ionosheath field is observed to drape across the dayside ionosphere, and ionopause currents over most of the dayside usually act to exclude the high ionosheath field from the generally low-field ionosphere. Tenuous, warm ionospheric plasma is sometimes observed on field lines outside the ionopause current sheet, suggesting that this dayside ionospheric plasma can be transported to the nightside and into the Venus wake. Some of the magnetic and thermal plasma features of the dayside ionosphere are shown, and modeling and distribution of flux ropes, small scale helical magnetic structures, are discussed in the context of thermal plasma observations.

Elphic, R. C.↗
NASA NTRS1980

Fiber-optic rotation sensors

Possible approaches to the design of fiber optic inertial frame rotation sensors based on the Sagnac effect are reviewed under two general categories: (1) single frequency interferometers which generate a phase shift proportional to inertial rotation rate, and (2) dual frequency interferometers for which the beat frequency is proportional to rotation rate. The principal variations within the single frequency class involve the way in which the nonreciprocal phase bias is used and techniques for generating the nonreciprocal bias. Within the dual frequency class, the various approaches differ principally in the way in which the counter-circulating frequencies are established.

Goss, W. C.↗
NASA NTRS1981

Application of microprocessors in an upper atmosphere instrument package

A servo-driven magnetometer table measuring offset from magnetic north has been developed by NASA to calculate payload azimuth required to point at a celestial target. Used as an aid to the study of gamma-ray phenomena, the high-altitude balloon-borne instrument determines a geocentric reference system, and calculates a set of pointing directions with respect to the system. Principal components include the magnetometer, stepping motor, microcomputer, and gray code shaft encoder. The single-chip microcomputer is used to control the orientation of the system, and consists of a central processing unit, program memory, data memory and input/output ports. Principal advantages include a low power requirement, consuming 6 watts, as compared to 30 watts consumed by the previous system.

Lim, T. S.↗
NASA NTRS1981

Landsat - What is operational in water resources

Applications of Landsat data in hydrology and water quality measurement were examined to determine which applications are operational. In hydrology, the principal applications have been surface water inventory, and land cover analysis for (1) runoff modeling and (2) abatement planning for non-point pollution and erosion. In water quality measurement, the principal applications have been: (1) trophic state assessment, and (2) measurement of turbidity and suspended sediment. The following applications were found to be operational: mapping of surface water, snow cover, and land cover (USGS Level 1) for watershed applications; measurement of turbidity, Secchi disk depth, suspended sediment concentration, and water depth.

Middleton, E. M.↗
NASA NTRS1957

Impingement of Cloud Droplets on 36.5-Percent-Thick Joukowski Airfoil at Zero Angle of Attack and Discussion of Use as Cloud Measuring Instrument in Dye-Tracer Technique

The trajectories of droplets i n the air flowing past a 36.5-percent-thick Joukowski airfoil at zero angle of attack were determined. The amount of water i n droplet form impinging on the airfoil, the area of droplet impingement, and the rate of droplet impingement per unit area on the airfoil surface were calculated from the trajectories and cover a large range of flight and atmospheric conditions. With the detailed impingement information available, the 36.5-percent-thick Joukowski airfoil can serve the dual purpose of use as the principal element in instruments for making measurements in clouds and of a basic shape for estimating impingement on a thick streamlined body. Methods and examples are presented for illustrating some limitations when the airfoil is used as the principal element in the dye-tracer technique.

Brun, R. J.↗
NASA NTRS1981

Magnetohydrodynamics MHD Engineering Test Facility ETF 200 MWe power plant. Conceptual Design Engineering Report CDER. Volume 3: Costs and schedules

The estimated plant capital cost for a coal fired 200 MWE electric generating plant with open cycle magnetohydrodynamics is divided into principal accounts based on Federal Energy Regulatory Commision account structure. Each principal account is defined and its estimated cost subdivided into identifiable and major equipment systems. The cost data sources for compiling the estimates, cost parameters, allotments, assumptions, and contingencies, are discussed. Uncertainties associated with developing the costs are quantified to show the confidence level acquired. Guidelines established in preparing the estimated costs are included. Based on an overall milestone schedule related to conventional power plant scheduling experience and starting procurement of MHD components during the preliminary design phase there is a 6 1/2-year construction period. The duration of the project from start to commercial operation is 79 months. The engineering phase of the project is 4 1/2 years; the construction duration following the start of the man power block is 37 months.

Source record↗
NASA NTRS1980

SCATHA observations of space plasma composition during a spacecraft charging event

During an Earth eclipse of the SCATHA spacecraft, the spacecraft charged to potentials greater than 1KV for about 30 minutes with extended excursions greater than 4KV. The composition of the hot plasma was obtained in the 0.1 to 32 keV energy range with an ion mass spectrometer aboard the spacecraft. Prior to the onset of the charging event, H(+) was the principal plasma ion, and during the event O(+) was the principal ion. The composition was energy dependent and varied significantly on a time scale of 4 minutes. An assumption that the ion flux was all H(+) led to computed number densities that were in error by more than a factor of two for several time intervals during the event.

Johnson, R. G.↗
NASA NTRS1981

Airborne antenna pattern calculations

Calculated principal-and off-principal plane patterns are presented for the following aircraft: de Havilland DHC-7, Rockwell Sabreliner 75A, Piper PA-31T Cheyenne, Lockheed Jet Star II, Piper PA-31-350 Navajo Chieftain, Beechcraft Duke B60, Rockwell Commander 700, Cessna Citation 3, Piper PA-31P Pressurized Navajo, Lear Jet, and Twin Otter DHC-6.

Knerr, T. J.↗
NASA NTRS1981

Study project of intrusive rocks: States of Espirito Santo and Rio de Janeiro, south and east of Minas Gerais and southeast of the state of Sao Paulo

The feasibility of mapping intrusive rocks in polycyclic and polymetamorphic areas using the logic method for photointerpretation of LANDSAT and radar imagery was investigated. The resolution, scale and spectral characteristics of the imagery were considered. Spectral characteristics of the intrusive rock units mapped using image 100 were investigated. It was determined that identification of acidic and basic intrusive bodies and determination of their relationships with principal structural directions using the logic method was feasible. Tectonic compartments were subdivided into units according to their predominant lithographic types, ignoring stratigraphy. The principal directions of various foliations, faults, megafolds, and fractural systems were defined. Delineation of the boundaries of intrusive bodies mapped using the spectral characteristics of Image 100 imagery ws determined to be more accurate than visual analysis. A 1:500,000 scale map of intrusions in the areas studied was generated.

Dejesusparada, N.↗
NASA NTRS1982

Mathematical models for the synthesis and optimization of spiral bevel gear tooth surfaces

The geometry of spiral bevel gears and to their rational design are studied. The nonconjugate tooth surfaces of spiral bevel gears are, in theory, replaced (or approximated) by conjugated tooth surfaces. These surfaces can be generated by two conical surfaces, and by a conical surface and a revolution. Although these conjugated tooth surfaces are simpler than the actual ones, the determination of their principal curvatures and directions is still a complicated problem. Therefore, a new approach, to the solution of these is proposed. Direct relationships between the principal curvatures and directions of the tool surface and those of the generated gear surface are obtained. With the aid of these analytical tools, the Hertzian contact problem for conjugate tooth surfaces can be solved. These results are useful in determining compressive load capacity and surface fatigue life of spiral bevel gears. A general theory of kinematical errors exerted by manufacturing and assembly errors is developed. This theory is used to determine the analytical relationship between gear misalignments and kinematical errors. This is important to the study of noise and vibration in geared systems.

Litvin, F. L.↗
NASA NTRS1980

An operational software system for geosynchronous satellite navigation

A software system has been designed to provide navigation parameters during the VAS experiment of the GOES-4 mission along with annotation data for near real time image registration. The four functional subsystems of the software system, Data Base Management, Image Processing, Navigation, and Output, and the principal hardware components are characterized. The ability of the system to fulfil its two principal objectives is verified by results obtained from processing actual SMS-2 satellite imagery.

Koch, D. W.↗
NASA NTRS1982

Structure and physics of solar faculae. II - The non-thermal velocity field above faculae

The OSO-8 satellite enabled the study of various characteristics of the profiles of Si II, Si IV, C IV, and O VI lines above active areas of the sun, as well as above quiet areas, and the derivation of some physical properties of the transition region between chromosphere and corona (CCT). The study of the lines shows a general tendency for the microvelocity fields on the average to be nearly constant for the heights corresponding to a temperature greater than 100,000 K; however they seem to slightly increase with height in quiet areas, and decrease in active areas. A multicomponent model of the CCT is necessary, and its geometry is far from being a set of plane-parallel columns. It is similar to an association of moving knots within the nonmoving principal component of the matter. The proportion of mass, in the knots relative to that in the nonmoving component, is several times larger in active regions than in quiet regions. In the knots, the nonthermal microvelocity fields are smaller in active regions and seem to decrease for temperature increasing above 100,000 K, contrary to what happens in the steady principal component.

Mouradian, Z.↗