Search NASA⌕ Search

SEARCH · Search NASA

Results for “Protein engineering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

STS-68 Space Shuttle mission report

The STS-68 Space Shuttle Program Mission Report summarizes the Payload activities as well as the Orbiter, External Tank (ET), Solid Rocket Booster (SRB), Redesigned Solid Rocket Motor (RSRM), and the Space Shuttle main engine (SSME) systems performance during the sixty-fifth flight of the Space Shuttle Program and the seventh flight of the Orbiter vehicle Endeavour (OV-105). In addition to the Orbiter, the flight vehicle consisted of an ET that was designated ET-65; three SSMEs that were designated as serial numbers 2028, 2033, and 2026 in positions 1, 2, and 3, respectively; and two SRBs that were designated BI-067. The RSRMs that were installed in each SRB were designated as 360W040A for the left SRB and 360W040B for the right SRB. The primary objective of this flight was to successfully perform the operations of the Space Radar Laboratory-2 (SRL-2). The secondary objectives of the flight were to perform the operations of the Chromosome and Plant Cell Division in Space (CHROMEX), the Commercial Protein Crystal Growth (CPCG), the Biological Research in Canisters (BRIC), the Cosmic Radiation Effects and Activation Monitor (CREAM), the Military Application of Ship Tracks (MAST), and five Get-Away Special (GAS) payloads.

Fricke, Robert W., Jr.↗
DOE OSTI2026

Hyporheic zone, river, and groundwater metagenome resolved genomes and rpS3 genes in East River Watershed, Colorado USA Summer 2020, 2021

Here we present metagenome assembled genomes (MAGs) for the bacterial and archaeal communities from water filter collected across 8 locations along the East River Watershed, CO, and 1 nearby groundwater well. The purpose was to look for connectivity and similarities across the network and to see the impact of the groundwater. As a part of Lawrence Berkeley National Laboratory (LBNL) Watershed Science Focus Area (SFA), we assessed community composition and strain similarities between the sites and we also compared it to previous metagenomic studies within the watershed looking at floodplain (Matheus Carnevali et al. 2021) and hillslope (Lavy et al. 2019) microbiomes. Here we present metagenome assembled genomes (MAGs) for the bacterial and archaeal communities from filters across 8 locations during August 2020 and July 2021. This resulted in 32 samples. The groundwater sample was sequenced at UC Berkley's QB3. The other 31 samples were sequenced at University of Maryland. Metagenomes were assembled using four autobinners and the best bins were selected using dasTool. The genomes were dereplicated at 95% with dRep and the subset of winning genomes were manually curated based on visual inspection of taxonomic profile, GC content, coverage, and a set of 51 bacterial single copy genes (BSCG), and 38 archaeal signal copy genes (ASCG). The dataset includes a zip file of 311 genomes (HZ_River_SW_MAGS_Dereplicated_95.zip). The dataset additionally includes a zipped file of ribosomal protein small subunit 3 (rpS3) proteins from the hyporheic zone and river data (rpS3_Proteins_HZ_River.zip), a metadata file used to register associated samples with IGSNs (International Generic Sample Numbers) (samples.csv), a location metadata file (locations.csv). This work was supported by the Watershed Function Science Focus Area at Lawrence Berkeley National Laboratory funded by the US Department of Energy, Office of Science, Biological and Environmental Research under Contract No. DE-AC02-05CH11231.

DNA↗
DOE OSTI2025

Cryo-EM Visualization of Intermolecular π-Electron Interactions within π-Conjugated Peptidic Supramolecular Polymers

The self-assembly of “π-peptides” – molecules with π-electron cores substituted with two or more oligopeptide chains – brings organic electronic function into biologically relevant nanomaterials. π-Peptides assemble into fibrillar nanomaterials as driven by enthalpic peptide-based hydrogen bonding networks and pi-core-based quadrupolar interactions. A large body of spectroscopic, morphological and computational studies informs on the nature of the self-assembly process and the resulting nanostructures, but detailed structural information has remained elusive. Here, inspired by the recent use of cryogenic electron microscopy (cryo-EM) to provide high-resolution structures for synthetic peptide nanomaterials, we present here the use of cryo-EM to offer ca. 3 Å resolution of π-peptide nanomaterial assemblies, visualizing for the first time the nature of the intermolecular π-core electronic interactions responsible for energy transport through these supramolecular materials.

Group theory↗
DOE OSTI2024

Propelling sustainable energy: Multi-omics analysis of pennycress FATTY ACID ELONGATION1 knockout for biofuel production

Abstract The aviation industry’s growing interest in renewable jet fuel has encouraged the exploration of alternative oilseed crops. Replacing traditional fossil fuels with a sustainable, domestically sourced crop can substantially reduce carbon emissions, thus mitigating global climate instability. Pennycress (Thlaspi arvense L.) is an emerging oilseed intermediate crop that can be grown during the offseason between maize (Zea mays) and soybean (Glycine max) to produce renewable biofuel. Pennycress is being domesticated through breeding and mutagenesis, providing opportunities for trait enhancement. Here, we employed metabolic engineering strategies to improve seed oil composition and bolster the plant's economic competitiveness. FATTY ACID ELONGATION1 (FAE1) was targeted using CRISPR-Cas 9 gene editing to eliminate very long chain fatty acids (VLCFAs) from pennycress seed oil, thereby enhancing its cold flow properties. Through an integrated multiomics approach, we investigated the impact of eliminating VLCFAs in developing and mature plant embryos. Our findings revealed improved cold-germination efficiency in fae1, with seedling emergence occurring up to 3 d earlier at 10 °C. However, these alterations led to a tradeoff between storage oil content and composition. Additionally, these shifts in lipid biosynthesis were accompanied by broad metabolic changes, such as the accumulation of glucose and ADP-glucose quantities consistent with increased starch production. Furthermore, shifts to shorter FA chains triggered the upregulation of heat shock proteins, underscoring the importance of VLCFAs in stress signaling pathways. Overall, this research provides crucial insights for optimizing pennycress seed oil while preserving essential traits for biofuel applications.

Rasoul, Amira (ORCID:0009000714290175)↗
DOE OSTI2024

Plant Cell Wall Polysaccharide O-Acetyltransferases

Plant cell walls are largely composed of polysaccharide polymers, including cellulose, hemicelluloses (xyloglucan, xylan, mannan, and mixed-linkage β-1,3/1,4-glucan), and pectins. Among these cell wall polysaccharides, xyloglucan, xylan, mannan, and pectins are often O-acetylated, and polysaccharide O-acetylation plays important roles in cell wall assembly and disease resistance. Genetic and biochemical analyses have implicated the involvement of three groups of proteins in plant cell wall polysaccharide O-acetylation: trichome birefringence-like (TBL)/domain of unknown function 231 (DUF231), reduced wall acetylation (RWA), and altered xyloglucan 9 (AXY9). Although the exact roles of RWAs and AXY9 are yet to be identified, members of the TBL/DUF231 family have been found to be O-acetyltransferases responsible for the O-acetylation of xyloglucan, xylan, mannan, and pectins. Here, we provide a comprehensive overview of the occurrence of O-acetylated cell wall polysaccharides, the biochemical properties, structural features, and evolution of cell wall polysaccharide O-acetyltransferases, and the potential biotechnological applications of manipulations of cell wall polysaccharide acetylation. Further in-depth studies of the biochemical mechanisms of cell wall polysaccharide O-acetylation will not only enrich our understanding of cell wall biology, but also have important implications in engineering plants with increased disease resistance and reduced recalcitrance for biofuel production.

Plant Sciences↗
NASA NTRSDate not supplied

Bioreactor Development for CO2-Based In Situ Resource Utilization Manufacturing

Sustainable long-duration manned missions on both the Moon and Mars will require in situ resource utilization (ISRU). Carbon dioxide (CO2) has great potential as a harvestable resource, making up 95% of the atmosphere on Mars and being produced as respiratory waste in spacecraft and future planetary habitats. Through ISRU, biomanufacturing has the capability to produce a near limitless array of products from local space resources. Here, a CO2-based ISRU recombinant protein producing bioreactor and associated biomanufacturing organisms were designed to produce a highly stable carbonic anhydrase (CA). Candidate organisms were selected by growth characterization on acetate and formic acid, carbon substrates that are synthesized via electrochemical conversion of CO2. To improve growth on the CO2 producing substrate formic acid and for direct integration of ISRU CO2, a synthetic Calvin-Benson-Bassam cycle was designed for use in Escherichia coli. Multiplex genetic modification in E. coli was facilitated by a tailored CRISPR/Cas9 and λ red recombineering two-vector system. For expression of CA, a blue light regulated T7 promoter was employed for dynamic and small molecule free induction. Efficient bioproduction through a fed-batch exponential feeding strategy was determined via mass balance analysis from ISRU substrates to biomass and CA yield. Flux balance analysis was used to model ISRU substrate metabolism and metabolic pathway engineering in candidate organisms under cultivation strategy conditions for both metabolism reconstruction and pathway design optimization. Finally, a small-scale, disposable bag bioreactor for use in the NASA Bioculture System infrastructure was designed to enable CO2-based CA biomanufacturing in reduced-gravity environments.

biomanufacturing↗
NASA NTRSDate not supplied

Bioreactor Development for CO2-Based In Situ Resource Utilization Manufacturing

Sustainable long-duration manned missions on both the Moon and Mars will require in situ resource utilization (ISRU). Carbon dioxide (CO2) has great potential as a harvestable resource, making up 95% of the atmosphere on Mars and being produced as respiratory waste in spacecraft and future planetary habitats. Through ISRU, biomanufacturing has the capability to produce a near limitless array of products from local space resources, which include pharmaceuticals, bioplastics, chemical feedstocks, and industrial enzymes. Here, a CO2-based ISRU recombinant protein bioreactor and associated biomanufacturing organisms were designed to produce a highly stable carbonic anhydrase (CA). Initial work characterized candidate organisms for growth on acetate and formic acid, carbon substrates that can be synthesized via electrochemical conversion of CO2. To improve growth on the CO2 producing substrate formic acid and for direct integration of ISRU CO2, a synthetic Calvin-Benson-Bassam cycle was designed for use in Cyberlindnera jadinii and Escherichia coli. Genetic modifications in E. coli will be facilitated by a tailored CRISPR/Cas9 and λ red recombineering two-vector system. For expression of CA, a blue light regulated T7 promoter was employed for dynamic and small molecule free induction. Efficient bioproduction through a fed-batch exponential feeding strategy was determined via mass balance calculations from ISRU substrates to biomass and CA yield. Flux balance analysis was used to model ISRU substrate metabolism and metabolic pathway engineering in candidate organisms under cultivation strategy conditions for both metabolism reconstruction and pathway design optimization. Finally, a small-scale, disposable bag bioreactor concept for use in the NASA Bioculture System infrastructure was designed to enable CO2-based CA production in reduced-gravity environments.

Biomanufacturing, Pathway Engineering, Flux Balanc↗
DOE OSTI2026

Data for Creating Yellow Seed Camelina sativa with Enhanced Oil Accumulation by CRISPR-Mediated Disruption of Transparent Testa 8

Camelina ( Camelina sativa L.), a hexaploid member of the Brassicaceae family, is an emerging oilseed crop being developed to meet the increasing demand for plant oils as biofuel feedstocks. In other Brassicas, high oil content can be associated with a yellow seed phenotype, which is unknown for camelina. We sought to create yellow seed camelina using CRISPR/Cas9 technology to disrupt its Transparent Testa 8 (TT8) transcription factor genes and to evaluate the resulting seed phenotype. We identified three TT8 genes, one in each of the three camelina subgenomes, and obtained independent CsTT8 lines containing frameshift edits. Disruption of TT8 caused seed coat colour to change from brown to yellow reflecting their reduced flavonoid accumulation of up to 44%, and the loss of a well-organized seed coat mucilage layer. Transcriptomic analysis of CsTT8-edited seeds revealed significantly increased expression of the lipid-related transcription factors LEC1, LEC2, FUS3, and WRI1 and their downstream fatty acid synthesis-related targets. These changes caused metabolic remodelling with increased fatty acid synthesis rates and corresponding increases in total fatty acid (TFA) accumulation from 32.4% to as high as 38.0% of seed weight, and TAG yield by more than 21% without significant changes in starch or protein levels compared to parental line. These data highlight the effectiveness of CRISPR in creating novel enhanced-oil germplasm in camelina. The resulting lines may directly contribute to future net-zero carbon energy production or be combined with other traits to produce desired lipid-derived bioproducts at high yields.

Biofuels↗
NASA NTRS2023

Uncovering Unique Molecular Adaptations in the Arabidopsis Thaliana Cvi-0 Ecotype

This research proposal aims to investigate the unique molecular adaptations exhibited by Arabidopsis Thaliana, specifically focusing on the Cape Verde Islands (Cvi-0) ecotype, in response to microgravity conditions. The study examines data from NASA’s Open Science Data Repository and applies a multifaceted RNAseq analysis pipeline using tools in the UseGalaxy.org open platform. Through transcriptomic analysis, differential gene expression patterns were identified in Cvi-0, revealing an absence of heat shock protein (HSP) upregulation and an upregulation of Rubisco Activase (RCA) and chloroplast-related pathways. To test the hypothesis that these adaptations may contribute to Cvi-0’s increased adaptability in microgravity, a three-fold experimental design is proposed. Four experimental groups will be cultivated under simulated microgravity and ground control conditions, including Cvi-0, Col-0, and genetically modified Col-0 with silenced HSP genes, and genetically modified Col-0 with upregulated RCA gene. Growth parameters will be measured to assess plant resilience, and RNA sequencing will provide transcriptomic data for pathway analysis. Anticipated outcomes include improved markers of plant health (mass, growth, etc.) of Cvi-0 in simulated microgravity and enhanced resilience in genetically altered Col-0 variants, providing insights into potential mechanisms of adaptation. This research would bear significance for space agriculture, nutrition for extended space missions, and sustainable terrestrial crop enhancement. Moreover, the insights gained could reshape crop engineering on Earth, enhancing robustness to climate induced stresses and bolstering global food security. The proposal’s trajectory blends scientific curiosity with practical applicability, forging a path towards sustainable food production and improving human exploration beyond our planet.

GL4HS↗
NASA NTRS1995

STS-70 Space Shuttle Mission Report - September 1995

The STS-70 Space Shuttle Program Mission Report summarizes the Payload activities as well as the Orbiter, External Tank (ET), Solid Rocket Booster (SRB), Reusable Solid Rocket Motor (RSRM), and the Space Shuttle main engine (SSME) systems performance during the seventieth flight of the Space Shuttle Program, the forty-fifth flight since the return-to-flight, and the twenty-first flight of the Orbiter Discovery (OV-103). In addition to the Orbiter, the flight vehicle consisted of an ET that was designated ET-71; three SSMEs that were designated as serial numbers 2036, 2019, and 2017 in positions 1, 2, and 3, respectively; and two SRBs that were designated 81-073. The RSRMs, designated RSRM-44, were installed in each SRB and were designated as 36OL044A for the left SRB, and 36OL044B for the right SRB. The primary objective of this flight was to deploy the Tracking and Data Relay Satellite-G/Inertial Upper Stage (TDRS-G/IUS). The secondary objectives were to fulfill the requirements of the Physiological and Anatomical Rodent Experiment/National Institutes of Health-Rodents (PARE/NIH-R); Bioreactor Demonstration System (BDS); Commercial Protein Crystal Growth (CPCG) experiment; Space Tissue Loss/National Institutes of Health - Cells (STL/NIH-C) experiment; Biological Research in Canisters (BRIC) experiment; Shuttle Amateur Radio Experiment-2 (SAREX-2); Visual Function Tester-4 (VFT-4); Hand-Held, Earth-Oriented, Real-Time, Cooperative, User-Friendly Location-Targeting and Environmental System (HERCULES); Microencapsulation in Space-B (MIS-B) experiment; Window Experiment (WINDEX); Radiation Monitoring Equipment-3 (RME-3); and the Military Applications of Ship Tracks (MAST) payload.

Fricke, Robert W., Jr.↗
NASA NTRS2001

TGF-beta1 release from biodegradable polymer microparticles: its effects on marrow stromal osteoblast function

BACKGROUND: Controlled release of transforming growth factor-beta1 (TGF-beta1) to a bone defect may be beneficial for the induction of a bone regeneration cascade. The objectives of this work were to assess the feasibility of using biodegradable polymer microparticles as carriers for controlled TGF-beta1 delivery and the effects of released TGF-beta1 on the proliferation and differentiation of marrow stromal cells in vitro. METHODS: Recombinant human TGF-beta1 was incorporated into microparticles of blends of poly(DL-lactic-co-glycolic acid) (PLGA) and poly(ethylene glycol) (PEG). Fluorescein isothiocynate-labeled bovine serum albumin (FITC-BSA) was co-encapsulated as a porogen. The effects of PEG content (0, 1, or 5% by weight [wt%]) and buffer pH (3, 5, or 7.4) on the protein release kinetics and the degradation of PLGA were determined in vitro for as long as 28 days. Rat marrow stromal cells were seeded on a biodegradable poly(propylene fumarate) (PPF) substrate. The dose response and biological activity of released TGF-beta1 was determined after 3 days in culture. The effects of TGF-beta1 released from PLGA/PEG microparticles on marrow stromal cell proliferation and osteoblastic differentiation were assessed during a 21-day period. RESULTS: TGF-beta1 was encapsulated along with FITC-BSA into PLGA/PEG blend microparticles and released in a multiphasic fashion including an initial burst for as long as 28 days in vitro. Increasing the initial PEG content resulted in a decreased cumulative mass of released proteins. Aggregation of FITC-BSA occurred at lower buffer pH, which led to decreased release rates of both proteins. The degradation of PLGA was increased at higher PEG content and significantly accelerated at acidic pH conditions. Rat marrow stromal cells cultured on PPF substrates showed a dose response to TGF-beta1 released from the microparticles similar to that of added TGF-beta1, indicating that the activity of TGF-beta1 was retained during microparticle fabrication and after growth factor release. At an optimal TGF-beta1 dosage of 1.0 ng/ml after 3 days, the released TGF-beta1 enhanced the proliferation and osteoblastic differentiation of marrow stromal cells over 21 days of culture, with increased total cell number, alkaline phosphatase activity, and osteocalcin production. CONCLUSIONS: PLGA/PEG blend microparticles can serve as delivery vehicles for controlled release of TGF-beta1, and the released growth factor enhances marrow stromal cell proliferation and osteoblastic differentiation in vitro. CLINICAL RELEVANCE: Controlled release of TGF-beta1 from PLGA/PEG microparticles is representative of emerging tissue engineering technologies that may modulate cellular responses to encourage bone regeneration at a skeletal defect site.

Non-NASA Center↗
DOE OSTI2026

Environmental Contributions to Proton Sharing in Protein Low-Barrier Hydrogen Bonds

Hydrogen bonds (H-bonds) are central to biomolecular structure and dynamics. Although H-bonds are typically characterized by well-defined proton positions, proton delocalization has been proposed to play a role in facilitating enzyme catalysis and allostery in some systems. Experimentally locating protons is difficult, hampering the study of proton mobility in H-bonds. We used neutron crystallography, atomic resolution X-ray bond length analysis, and large quantum mechanics/molecular mechanics-Born–Oppenheimer molecular dynamics (QM/MM-BOMD) simulations to comprehensively characterize the shared proton/deuteron in a Glu–Asp low-barrier hydrogen bond (LBHB) in the bacterial protein YajL that is a conventional H-bond in the homologous disease-associated human protein DJ-1. X-ray bond length analysis of protiated and perdeuterated DJ-1 and YajL shows no significant effect of deuteron substitution on these carboxylic acid-carboxylate H-bonds but does reveal an effect at the active site glutamic acid near a cysteine thiolate. Residues in an H-bonded network that might favor LBHB formation in YajL were interrogated by the mutation of homologous residues in DJ-1. A distal DJ-1 substitution increases proton delocalization in the Glu–Asp H-bond, demonstrating that mutations within extended H-bond networks can modulate proton transfer barriers in carboxylic acid-carboxylate H-bonds. In addition, proton mobility in the H-bond is correlated with dimer-spanning motions in the QM/MM-BOMD simulations of YajL and DJ-1. Our results show that proton delocalization can be tuned using combined bioinformatic, structural, and computational information, opening the possibility of using engineered proton delocalization as a probe of H-bonding environments and as a tool to test hypotheses about LBHB function.

Lin, Jiusheng [University of Nebraska, Lincoln, NE↗
DOE OSTI2025

Addressing genome scale design tradeoffs in Pseudomonas putida for bioconversion of an aromatic carbon source

Genome-scale metabolic models (GSMM) are commonly used to identify gene deletion sets that result in growth coupling and pairing product formation with substrate utilization and can improve strain performance beyond levels typically accessible using traditional strain engineering approaches. However, sustainable feedstocks pose a challenge due to incomplete high-resolution metabolic data for non-canonical carbon sources required to curate GSMM and identify implementable designs. Here we address a four-gene deletion design in the Pseudomonas putida KT2440 strain for the lignin-derived non-sugar carbon source, p-coumarate (p-CA), that proved challenging to implement. We examine the performance of the fully implemented design for p-coumarate to glutamine, a useful biomanufacturing intermediate. In this study glutamine is then converted to indigoidine, an alternative sustainable pigment and a model heterologous product that is commonly used to colorimetrically quantify glutamine concentration. Through proteomics, promoter-variation, and growth characterization of a fully implemented gene deletion design, we provide evidence that aromatic catabolism in the completed design is rate-limited by fumarase hydratase (FUM) enzyme activity in the citrate cycle and requires careful optimization of another fumarate hydratase protein (PP_0897) expression to achieve growth and production. A double sensitivity analysis also confirmed a strict requirement for fumarate hydratase activity in the strain where all genes in the growth coupling design have been implemented. Metabolic cross-feeding experiments were used to examine the impact of complete removal of the fumarase hydratase reaction and revealed an unanticipated nutrient requirement, suggesting additional functions for this enzyme. While a complete implementation of the design was achieved, this study highlights the challenge of completely inactivating metabolic reactions encoded by under-characterized proteins, especially in the context of multi-gene edits.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Next-Generation Sequencing Data from a CUT&RUN Study of R. toruloides IFO0880 Cse4 and Orc1 Binding Sites

Rhodotorula toruloides has been increasingly explored as a host for bioproduction of lipids, fatty acid derivatives and terpenoids. Various genetic tools have been developed, but neither a centromere nor an autonomously replicating sequence (ARS), both necessary elements for stable episomal plasmid maintenance, has yet been reported. In this study, cleavage under targets and release using nuclease (CUT&RUN), a method used for genome-wide mapping of DNA–protein interactions, was used to identify R. toruloides IFO0880 genomic regions associated with the centromeric histone H3 protein Cse4, a marker of centromeric DNA. Fifteen putative centromeres ranging from 8 to 19 kb in length were identified and analyzed, and four were tested for, but did not show, ARS activity. These centromeric sequences contained below average GC content, corresponded to transcriptional cold spots, were primarily nonrepetitive and shared some vestigial transposon-related sequences but otherwise did not show significant sequence conservation. Future efforts to identify an ARS in this yeast can utilize these centromeric DNA sequences to improve the stability of episomal plasmids derived from putative ARS elements.

Genome Engineering↗
DOE OSTI2024

Dual Enhancement of Thermostability and Activity of Xylanase through Computer-Aided Rational Design

In the realm of enzyme engineering, the dual enhancement of thermostability and activity remains a challenge. Herein, we employed a computer-aided approach integrating folding free energy calculations and evolutionary analysis to engineer Paecilomyces thermophila xylanase into a hyperthermophilic enzyme for application in the paper and pulp industry. Through the computational rational design, XynM9 with superior thermostability and enhanced activity was designed. Its optimal reaction temperature increases by 10 °C to 85 °C, its T m increases by 10 °C to 93 °C, and its half-life increases 11-fold to 5.8 h. Additionally, its catalytic efficiency improves by 57% to 3926 s –1 mM –1 . Molecular dynamics simulations revealed that XynM9 is stabilized by more hydrogen bonds and salt bridges than wild-type xylanase. The mutant’s narrower catalytic cleft enhances the substrate-binding affinity, thus improving the catalytic efficiency. In harsh conditions at 80 °C and pH 10, using XynM9 significantly reduced both hemicellulose and lignin, which makes it a good candidate for use in the paper and pulp process. Finally, our study presents an accurate and efficient strategy for the dual enhancement of enzyme properties, guiding further improvement of computational tools for protein stabilization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1996

STS-75 Space Shuttle Mission Report

The STS-75 Space Shuttle Program Mission Report summarizes the Payload activities as well as the Orbiter, External Tank (ET), Solid Rocket Booster (SRB), Reusable Solid Rocket Motor (RSRM), and the Space Shuttle main engine (SSME) systems performance during the seventy-fifth flight of the Space Shuttle Program, the fiftieth flight since the return-to-flight, and the nineteenth flight of the Orbiter Columbia (OV-102). In addition to the Orbiter, the flight vehicle consisted of an ET that was designated ET-76; three SSME's that were designated as serial numbers 2029, 2034, and 2017 in positions 1, 2, and 3, respectively; and two SRB's that were designated BI-078. The RSRM's, designated RSRM-53, were installed in each SRB and the individual RSRMs were designated as 36OW53A for the left SRB, and 36OW053B for the right SRB. The primary objectives of this flight were to perform the operations necessary to fulfill the requirements of the Tethered Satellite System-1 R (TSS-1R), and the United States Microgravity Payload-3 (USMP-3). The secondary objectives were to complete the operations of the Orbital Acceleration Research Experiment (OARE), and to meet the requirements of the Middeck Glovebox (MGBX) facility and the Commercial Protein Crystal Growth (CPCG) experiment. Appendix A provides the definition of acronyms and abbreviations used thorughout the report. All times during the flight are given in Greenwich mean time (GMT) and mission elapsed time (MET).

Fricke, Robert W., Jr.↗
NASA NTRS2016

PowerCells Payload on EuCROPIS - Measuring Synthetic Biology in Space

NASA’s PowerCell payload on the DLR (Deutsches Zentrum fur Luft- und Raumfahrt, i.e. German Aerospace Center) Eu:CROPIS satellite will compare the effect of multiple simulated gravity regimes on basic processes required for synthetic biology in space including growth, protein production, and genetic transformation of the bacterium Bacillus subtilis. In addition, it will pioneer the use of a cyanobacterially-produced feedstock for microbial growth in space, a concept we call “PowerCell.” The PowerCell experiment system will be integrated using the Spaceflight Secondary Payload System with the German Space Agency's (DLR's) Euglena and Combined Regenerative Organic-food Production In Space (Eu:CROPIS) satellite, to be launched during the summer of 2017. In order to simulate the gravitational gradient of different celestial bodies, the Eu:CROPIS satellite will establish artificial microgravity, lunar, and Martian gravity levels prior to conducting each set of biological experiments, with experimental results compared to ground controls. Experiments will be carried out in microfluidics cards with experimental progress measured through absorbance as detected by the LED-based optical system. Here we describe the ground studies that led to these experiments, along with a description of the flight hardware and its performance. The results of this mission will provide foundational data for the use and production of genetically engineered organisms for extraterrestrial missions.

PowerCell experiment system↗
DOE OSTI2025

Torsional twist of the SARS ‐ CoV and SARS ‐ CoV ‐2 SUD ‐N and SUD ‐M domains

Abstract Coronavirus non‐structural protein 3 (nsp3) forms hexameric crowns of pores in the double membrane vesicle that houses the replication–transcription complex. Nsp3 in SARS‐like viruses has three unique domains absent in other coronavirus nsp3 proteins. Two of these, SUD‐N (Macrodomain 2) and SUD‐M (Macrodomain 3), form two lobes connected by a peptide linker and an interdomain disulfide bridge. We resolve the first complete x‐ray structure of SARS‐CoV SUD‐N/M as well as a mutant variant of SARS‐CoV‐2 SUD‐N/M modified to restore cysteines for interdomain disulfide bond naturally lost by evolution. Comparative analysis of all structures revealed SUD‐N and SUD‐M are not rigidly associated but rather have significant rotational flexibility. Phylogenetic analysis supports that the potential to form the disulfide bond is common across betacoronavirus isolates from many bat species and civets, but also one or both of the cysteines that form the disulfide bond are absent across isolates from bats and pangolins. The absence of these cysteines does not impact viral replication or protein translation.

Rosas‐Lemus, Monica [Department of Microbiology‐Im↗