Search NASA⌕ Search

SEARCH · Search NASA

Results for “RADIATION METER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Earth Radiation Budget Satellite (ERBS): Emergency support

The primary purpose of the Earth Radiation Budget Satellite (ERBS) project is to study the Earth's atmospheric processes and their relationship to the Earth's climate. Following deployment from the Space Shuttle, the satellite was maneuvered into a circular orbit of 610 km x 610 km x 57 degrees, with a period of 99.6 minutes. The Deep Space Network (DSN) will support the ERBS during emergency situations in the event that the standard Tracking and Data Relay Satellite System (TDRSS) to White Sands data link is inoperative. Emergency support will be provided by the DSN's 26-meter antenna subnetwork. Information is given in tabular form for DSN network support, frequency assignments, telemetry, and command.

Williamson, J.↗
NASA NTRS1985

Reduced phenylalanine ammonia-lyase and tyrosine ammonia-lyase activities and lignin synthesis in wheat grown under low pressure sodium lamps

Wheat (Triticum aestivum L. cv Fremont) grown in hydroponic culture under 24-hour continuous irradiation at 560 to 580 micromoles per square meter per second from either metalhalide (MH), high pressure sodium (HPS), or low pressure sodium (LPS) lamps reached maturity in 70 days. Grain yields were similar under all three lamps, although LPS-grown plants lodged at maturity. Phenylalanine ammonia-lyase (PAL) and a tyrosine ammonia lyase (TAL) with lesser activity were detected in all extracts of leaf, inflorescence, and stem. Ammonia-lyase activities increased with age of the plant, and plants grown under the LPS lamp displayed PAL and TAL activities lower than wheat cultured under MH and HPS radiation. Greenhouse solar-grown wheat had the highest PAL and TAL activities. Lignin content of LPS-grown wheat was also significantly reduced from that of plants grown under MH or HPS lamps or in the greenhouse, showing a correlation with the reduced PAL and TAL activities. Ratios of far red-absorbing phytochrome to total phytochrome were similar for all three lamps, but the data do not yet warrant a conclusion about specific wavelengths missing from the LPS lamps that might have induced PAL and TAL activities in plants under the other lamps.

Triticum/enzymology/growth & development/metabolis↗
NASA NTRS2011

The Interstellar Bullet Engine IRAS 05506+2414

Throughout their life-cycles, high-mass stars inject large amounts of energy and momentum into theirenvironments through stellar winds. Results from a study of the Orion BN/KL region indicate that disruption of a massive young stellar system can lead to an explosive event producing a wide-angle outflow, different from the classical bipolar flows driven by young stellar object (YSO) accretion disks. The discovery of a massive YSO, IRAS 05506+2414, may prove to be the second instance of this uncommon outflow. Prior to this study, data was collected using the Arizona Radio Observatory's 10-meter and 12-meter telescopes. Spectra of 16 different molecular line transitions were organized, reduced, and prepared for further analysis. A variety of molecular transitions were observed, such as 12CO 2-1, HCO+ 3-2, CS 3-2, in order to probe physical conditions of the YSO. From line transitions like HCO+ 3-2, we will determine physical properties like density, temperature, and velocity of our source object. For each molecular transition, the spectra were averaged in subsets, which were then averaged to produce a final spectra with an optimal signal to noise ratio. Future radiative modeling will yield mass and energetics of IRAS05506+2414.

millimeter-wave↗
NASA NTRS1978

The High Energy Astronomy Observatory X-ray Telescope

The High Energy Astronomy Observatory-Mission B (HEAO-B) is a satellite observatory for the purpose of performing a detailed X-ray survey of the celestial sphere. Measurements will be made of stellar radiation in the range 0.2 through 20 keV. The primary viewing requirement is to provide final aspect solution and internal alignment information to correlate an observed X-ray image with the celestial sphere to within one-and-one-half arc seconds. The Observatory consists of the HEAO Spacecraft together with the X-ray Telescope. The Spacecraft provides the required attitude control and determination system, data telemetry system, space solar power system, and interface with the launch vehicle. The X-ray Telescope includes a high resolution mirror assembly, optical bench metering structure, X-ray detectors, detector positioning system, detector electronics and aspect sensing system.

Miller, R.↗
NASA NTRS1989

Conceptual design study of a 5 kilowatt solar dynamic Brayton power system using a dome Fresnel lens solar concentrator

The primary project objective was to generate a conceptual design for a nominal 5 kW solar dynamic space power system, which uses a unique, patented, transmittance-optimized, dome-shaped, point-focus Fresnel lens as the optical concentrator. Compared to reflective concentrators, the dome lens allows 200 times larger slope errors for the same image displacement. Additionally, the dome lens allows the energy receiver, the power conversion unit (PCU), and the heat rejection radiator to be independently optimized in configuration and orientation, since none of these elements causes any aperture blockage. Based on optical and thermal trade studies, a 6.6 m diameter lens with a focal length of 7.2 m was selected. This lens should provide 87 percent net optical efficienty at 800X geometric concentration ratio. The large lens is comprised of 24 gores, which compactly stow together during launch, and automatically deploy on orbit. The total mass of the microglass lens panels, the graphite/epoxy support structure, and miscellaneous hardware is about 1.2 kg per square meter of aperture. The key problem for the dome lens approach relates to the selection of a space-durable lens material. For the first time, all-glass Fresnel lens samples were successfully made by a sol-gel casting process.

Oneill, Mark J.↗
NASA NTRS2000

Conceptual Design Study of a Closed Brayton Cycle Turbogenerator for Space Power Thermal-To-Electric Conversion System

A conceptual design study was completed for a 360 kW Helium-Xenon closed Brayton cycle turbogenerator. The selected configuration is comprised of a single-shaft gas turbine engine coupled directly to a high-speed generator. The engine turbomachinery includes a 2.5:1 pressure ratio compression system with an inlet corrected flow of 0.44 kg/sec. The single centrifugal stage impeller discharges into a scroll via a vaned diffuser. The scroll routes the air into the cold side sector of the recuperator. The hot gas exits a nuclear reactor radiator at 1300 K and enters the turbine via a single-vaned scroll. The hot gases are expanded through the turbine and then diffused before entering the hot side sector of the recuperator. The single shaft design is supported by air bearings. The high efficiency shaft mounted permanent magnet generator produces an output of 370 kW at a speed of 60,000 rpm. The total weight of the turbogenerator is estimated to be only 123 kg (less than 5% of the total power plant) and has a volume of approximately 0.11 cubic meters. This turbogenerator is a key element in achieving the 40 to 45% overall power plant thermal efficiency.

Hansen, Jeff L.↗
NASA NTRS2014

SLS-Derived Lab: Precursor to Deep Space Human Exploration

Plans to send humans to Mars are in work and the launch system is being built. Are we ready? Robotic missions have successfully demonstrated transportation, entry, landing and surface operations but for human missions there are significant, potentially show-stopping issues. These issues, called Strategic Knowledge Gaps (SKGs) are the unanswered questions concerning long-duration exploration beyond low-earth-orbit. The gaps represent a risk of loss of life or mission and because they require extended exposure to the weightless environment outside earth's protective geo-magnetic field they cannot be resolved on the earth or on the International Space Station (ISS). Placing a laboratory at the relatively close and stable lunar Distant Retrograde Orbit (DRO) provides an accessible location with the requisite environmental conditions for conducting SKG research and testing mitigation solutions. Configurations comprised of multiple 3 meter and 4.3 meter diameter modules have been studied but the most attractive solution uses elements of the human Mars launch vehicle or Space Launch System (SLS) for a Mars proving ground laboratory. A shortened version of an SLS hydrogen propellant tank creates a Skylab-like pressure vessel that flies fully outfitted on a single launch. This not only offers significant savings by incorporating SLS pressure vessel development costs but avoids the expensive ISS approach using many launches with substantial on-orbit assembly before becoming operational. One of the most challenging SKGs is crew radiation protection; this is why SKG laboratory research is combined with Mars transit Habitat systems development. Fundamentally, the two cannot be divorced because using the habitat systems for protection requires actual hardware geometry and material properties intended to contribute to shielding effectiveness. The SKGs are difficult problems, solutions are not obvious, and require integrated, iterative, and multi-disciplinary development. A lunar DRO lab built from the launch system elements enables an early and representative transit habitat test bed necessary for closing gaps before sending humans on a 1000 day Mars mission.

Griffin, Brand↗
NASA NTRS1988

Ground based infrared astronomy

Infrared spectroscopic instrumentation has been developed for ground-based measurements of astrophysical objects in the intermediate infrared. A conventional Michelson interferometer is limited for astronomical applications in the intermediate infrared by quantum noise fluctuations in the radiation form the source and/or background incident on the detector, and the multiplex advantage is no longer available. One feasible approach to recovering the multiplex advantage is post-dispersion. The infrared signal after passing through telescope and interferometer, is dispersed by a low resolution grating spectrometer onto an array of detectors. The feasibility of the post-dispersion system has been demonstrated with observations of astrophysical objects in the 5 and 10 micrometer atmospheric windows from ground-based telescopes. During FY87/88 the post-disperser was used at the Kitt Peak 4-meter telescope and McMath telescope with facility Fourier transform spectrometers. Jupiter, Saturn, Mars, and Venus were observed. On Jupiter, the resolution at 12 micrometer was 0.01/cm, considerably higher than had been acheived previously. The spectrum contains Jovian ethane and acetylene emission. Construction was begun on the large cryogenic grating spectrometer.

Jennings, D. E.↗
NASA NTRS1991

Transient response of a high-capacity heat pipe for Space Station Freedom

High-capacity heat pipe radiator panels have been proposed as the primary means of heat rejection for Space Station Freedom. In this system, the heat pipe would interface with the thermal bus condensers. Changes in system heat load can produce large temperature and heat load variations in individual heat pipes. Heat pipes could be required to start from an initially cold state, with heat loads temporarily exceeding their low-temperature transport capacity. The present research was motivated by the need for accurate prediction of such transient operating conditions. In this work, the cold startup of a 6.7-meter long high-capacity heat pipe is investigated experimentally and analytically. A transient thermohydraulic model of the heat pipe was developed which allows simulation of partially-primed operation. The results of cold startup tests using both constant temperature and constant heat flux evaporator boundary conditions are shown to be in good agreement with predicted transient response.

Ambrose, J. H.↗
NASA NTRS1992

The ionization of gamma-ray burst environments

If a gamma-ray burst (GRB) occurs in a neutral medium, ionizing radiation associated with the burst will flash-photoionize a region surrounding the source. Detection of the line emission from this ionized region can constrain the flux of ionizing radiation accompanying the GRB and the density and ionization state of the environment surrounding the burst source. If the medium is sufficiently dense then the ionized region will recombine and fade on human timescales, aiding in the detection of the burst location and further constraining the density of the medium. However, dust within the dense medium may attenuate the line flux; the burst is unlikely to melt the dust along the line-of-sight. Astronomically interesting flux limits can be established by observations with reasonable integration times on a major telescope (e.g., 3 meter or larger).

Band, D. L.↗
NASA NTRS2008

The On-Orbit Performance of the CALIOP Lidar on CALIPSO

CALIPSO is a joint NASA - CNES satellite currently in its third year of operation in low earth orbit. The satellite is making optical measurements of the Earth s atmosphere to help quantify the impact of aerosols and clouds on the Earth s radiation budget. To do this, it carries three instruments: CALIOP, a two-wavelength polarization-sensitive elastic backscatter lidar; the IIR a three band thermal imaging radiometer; and the WFC a visible single-band imager. CALIOP utilizes a Nd:YAG laser which incorporates a harmonic crystal to provide laser light at both 1064 nm and 532 nm. This beam is expanded and transmitted into the atmosphere at near nadir. The laser light scattered from clouds and aerosols back to the satellite, along with any solar background light, is collected by a one meter diameter beryllium telescope. The captured light is separated into its two wavelengths and optically filtered. The 1064 nm component is detected with an avalanche photodiode, while the 532 nm component is further resolved into two linear polarization components which are then detected by matching photomultiplier tubes. This presentation will describe the lidar and give examples of its on-orbit performance.

Winker, David↗
NASA NTRS2023

Decoupling in the Vertical Shape of HCHO During a Sea Breeze Event: the Effect on Trace Gas Satellite Retrievals and Column-to-Surface Translation

The effect of sea breeze circulation on stratification of the vertical formaldehyde (HCHO) concentration vertical profiles is explored using a regional atmospheric chemical transport model (CTM) for three synoptically stagnant days focused on the east coast of the U.S in June 2018. During this event, a significant thermal contrast between the Atlantic Ocean and the terrestrial regions (12–17 °C), observed by moderate resolution imaging spectroradiometer (MODIS) and well-captured by the WRF-CMAQ model (15–18 °C), is conducive to monsoon-like flow, perpendicular to the shorelines, carrying clean marine air masses over the land within a few hundreds of meters above the surface. In contrast, the westerly continental polluted air masses prevail in higher altitudes. These two conflicting flows result in atypical vertical shapes of HCHO concentrations increasing with altitude. This decoupling pattern is so pronounced that we observe total column HCHO negatively correlate with surface concentrations. Comparisons of an accredited global model, GEOS-CF, to surface wind measurements and MODIS skin temperature indicate its poor representation of the sea breeze timing and strength, resulting in GEOS-CF HCHO vertical shapes being drastically different from the WRF-CMAQ. Based on radiative transfer calculations, the differences in the vertical distribution of HCHO between the WRF-CMAQ and that of GEOS-CF in the first 3 km are sufficient to induce a 20–30% error in air mass factors (thus total vertical HCHO column abundances). Through an experiment involving converting HCHO total columns to surface mixing ratios, we demonstrate that GEOS-CF allocates noticeably more HCHO molecules (40–150%) to the surface layer due to the misrepresentation of the vertical shape of HCHO during the sea breeze event. It is known that a significant fraction of the human population lives in coastal areas prone to detrimental effects caused by air pollution, and elevated pollutant concentrations usually occur in synoptically stagnant atmospheric conditions when local circulation patterns come into play; accordingly, our experiments emphasize the importance of the effect a priori profiles can have on satellite-derived applications under such conditions. To ensure that the quantitative representation of satellite-based trace gas retrievals on a daily basis is trustworthy and useable for air quality applications, atmospheric models providing a priori profiles for satellite retrievals should be well-tuned to reproduce complex local circulation such as sea-land breezes.

sea breeze↗
NASA NTRS2005

Calibration and Characterization of the NASA EOS Terra and Aqua MODIS Instruments

The Moderate Resolution Imaging Spectroradiometer (MODIS) instrument is operating on both of the Terra and Aqua missions within the NASA Earth Observing System (EOS). The Terra MODIS instrument began taking observations in February 2000 and the Aqua MODIS instrument began taking observations in June of 2002 and both continue to operate successfully up to the present time. The MODIS instrument scans the entire Earth every 24 hours at nominal spatial resolutions between 250 and 1000 meters. It has 36 spectral bands spanning the electromagnetic spectrum from the visible wavelengths mar 400 micrometers to the emissive thermal infrared wavelengths at 15 micrometers. The MODIS instruments produce approximately 40 geophysical products devoted to observing land, ocean, and atmospheric processes and trends. To meet the scientific objectives associated with the NASA Earth sciences efforts the MODIS instruments must be and have been carefully calibrated and the performance characterized to meet specifications and goals such as five percent radiance and two percent relative to the sun accuracy in the twenty bands providing reflected solar radiation observations and one percent radiance accuracy in the sixteen bands observing in the thermal infrared. Over the time spanning instrument development and the pre-launch calibration and characterization of the instrument through the years of operation in space, the performance of the MODIS instruments have changed in multiple ways and appropriate adjustments made in relevant algorithms and look-up tables necessary to produce observations that meet the scientific objectives and requirements. The changes have been quantified and accounted for through careful use of on-board calibration devices such as the Spectro-Radiometric Calibration Assembly (SRCA), the Solar Diffuser (SD) and its companion Solar Diffuser Stability Monitor (SDSM), deep-space and lunar observations, and calibration targets on the Earth's surface. The strictest and most difficult challenges have come in trying to meet the requirements for observing Ocean color and related ocean biology processes over time and space. Overall the MODIS observations have been very successful in providing valuable scientific and applications results. The essential capabilities of MODIS are to be provided in the future by the Visible and Infrared Imaging Radiometer Suite (VIIRS) on the National Polar Orbiting Environmental Satellite Series (NPOESS).

Salomonson, Vincent V.↗
NASA NTRS2014

Lunar Reconnaissance Orbiter Orbit Determination Accuracy Analysis

Results from operational OD produced by the NASA Goddard Flight Dynamics Facility for the LRO nominal and extended mission are presented. During the LRO nominal mission, when LRO flew in a low circular orbit, orbit determination requirements were met nearly 100% of the time. When the extended mission began, LRO returned to a more elliptical frozen orbit where gravity and other modeling errors caused numerous violations of mission accuracy requirements. Prediction accuracy is particularly challenged during periods when LRO is in full-Sun. A series of improvements to LRO orbit determination are presented, including implementation of new lunar gravity models, improved spacecraft solar radiation pressure modeling using a dynamic multi-plate area model, a shorter orbit determination arc length, and a constrained plane method for estimation. The analysis presented in this paper shows that updated lunar gravity models improved accuracy in the frozen orbit, and a multiplate dynamic area model improves prediction accuracy during full-Sun orbit periods. Implementation of a 36-hour tracking data arc and plane constraints during edge-on orbit geometry also provide benefits. A comparison of the operational solutions to precision orbit determination solutions shows agreement on a 100- to 250-meter level in definitive accuracy.

Gravitation↗
NASA NTRS1995

Mechanism for generation of 2-3 kHz radiation in the outer heliosphere

The question of how low-frequency non-thermal radio emissions at the boundary of the heliosphere might be generated is considered. The mechanism consists of two steps. First, the beam of energetic electrons generates a high level of electrostatic Langmuir plasma waves. Second, electromagnetic radiation results from the non-linear interaction between Langmuir waves. Intensity of radio emissions at 2 to 3 kHz detected by the Voyager plasma wave instrument in the outer heliosphere can be explained provided that the electron beams generating Langmuir waves exist also in the postshock plasma due to secondary shocks in the compressed solar wind beyond the termination shock. Modification of the heliospheric shocks by the cosmic ray pressure is also taken into account. The field strengths of Langmuir waves required to generate the second harmonic emissions are of 50 to 100 microvolts per meter. These waves may be observed in situ by Voyager 1 and 2 in the near future.

Macek, W. M.↗
NASA NTRS1992

Pressurized Lunar Rover (PLR)

The objective of this project was to design a manned pressurized lunar rover (PLR) for long-range transportation and for exploration of the lunar surface. The vehicle must be capable of operating on a 14-day mission, traveling within a radius of 500 km during a lunar day or within a 50-km radius during a lunar night. The vehicle must accommodate a nominal crew of four, support two 28-hour EVA's, and in case of emergency, support a crew of six when near the lunar base. A nominal speed of ten km/hr and capability of towing a trailer with a mass of two mt are required. Two preliminary designs have been developed by two independent student teams. The PLR 1 design proposes a seven meter long cylindrical main vehicle and a trailer which houses the power and heat rejection systems. The main vehicle carries the astronauts, life support systems, navigation and communication systems, lighting, robotic arms, tools, and equipment for exploratory experiments. The rover uses a simple mobility system with six wheels on the main vehicle and two on the trailer. The nonpressurized trailer contains a modular radioisotope thermoelectric generator (RTG) supplying 6.5 kW continuous power. A secondary energy storage for short-term peak power needs is provided by a bank of lithium-sulfur dioxide batteries. The life support system is partly a regenerative system with air and hygiene water being recycled. A layer of water inside the composite shell surrounds the command center allowing the center to be used as a safe haven during solar flares. The PLR 1 has a total mass of 6197 kg. It has a top speed of 18 km/hr and is capable of towing three metric tons, in addition to the RTG trailer. The PLR 2 configuration consists of two four-meter diameter, cylindrical hulls which are passively connected by a flexible passageway, resulting in the overall vehicle length of 11 m. The vehicle is driven by eight independently suspended wheels. The dual-cylinder concept allows articulated as well as double Ackermann steering. The primary power of 8 kW is supplied by a dynamic isotope system using a closed Brayton cycle with a xenon-hydrogen mixture as the working fluid. A sodium-sulfur battery serves as the secondary power source. Excess heat produced by the primary power system and other rover systems is rejected by radiators located on the top of the rear cylinder. The total mass of the PLR 2 is 7015 kg. Simplicity and low total weight have been the driving principles behind the design of PLR 1. The overall configuration consists of a 7-m-long, 3-m-diameter cylindrical main vehicle and a two-wheeled trailer. The cylinder of the main body is capped by eight-section, faceted, semi-hemispherical ends. The trailer contains the RTG power source and is not pressurized. The shell of the main body is constructed of a layered carbon fiber/foam/Kevlar sandwich structure. Included in the shell is a layer of water for radiation protection. The layer of water extends from the front of the rover over the crew compartment and creates a safe haven for the crew during a solar flare-up. The carbon fiber provides the majority of the strength and stiffness and the Kevlar provides protection from micrometeoroids. The Kevlar is covered with a gold foil and multi-layer insulation (MLI) to reduce radiation degradation and heat transfer through the wall. A thin thermoplastic layer seals the fiber and provides additional strength.

Creel, Kenneth↗
NASA NTRS2020

TRAPPIST-1 Habitable Atmosphere Intercomparison (THAI): motivations and protocol version 1.0

Upcoming telescopes such as the James Webb Space Telescope (JWST), the European Extremely Large Telescope (E-ELT), the Thirty Meter Telescope (TMT) or the Giant Magellan Telescope (GMT) may soon be able to characterize, through transmission, emission or reflection spectroscopy, the atmospheres of rocky exoplanets orbiting nearby M dwarfs. One of the most promising candidates is the late M-dwarf system TRAPPIST-1, which has seven known transiting planets for which transit timing variation (TTV) measurements suggest that they are terrestrial in nature, with a possible enrichment in volatiles. Among these seven planets, TRAPPIST-1e seems to be the most promising candidate to have habitable surface conditions, receiving ∼66 % of the Earth's incident radiation and thus needing only modest greenhouse gas inventories to raise surface temperatures to allow surface liquid water to exist. TRAPPIST-1e is, therefore, one of the prime targets for the JWST atmospheric characterization. In this context, the modeling of its potential atmosphere is an essential step prior to observation. Global climate models (GCMs) offer the most detailed way to simulate planetary atmospheres. However, intrinsic differences exist between GCMs which can lead to different climate prediction and thus observability of gas and/or cloud features in transmission and thermal emission spectra. Such differences should preferably be known prior to observations. In this paper we present a protocol to intercompare planetary GCMs. Four testing cases are considered for TRAPPIST-1e, but the methodology is applicable to other rocky exoplanets in the habitable zone. The four test cases included two land planets composed of modern-Earth and pure-CO2 atmospheres and two aqua planets with the same atmospheric compositions. Currently, there are four participating models (LMDG, ROCKE-3D, ExoCAM, UM); however, this protocol is intended to let other teams participate as well.

Thomas Jean Daniel Fauchez↗
NASA NTRS1984

Earth resources research using the Shuttle Imaging Radar system

The Shuttle Imaging Radar (SIR) is an L-band synthetic radar that transmits and receives horizontally polarized microwave radiation. It was originally launched on the second Shuttle test flight (STS-2) in November 1981 with the antenna depression angle fixed at 43 deg. In this configuration, the radar system was referred to as SIR-A, and it collected more than then a million square kilometers of Earth imagery in a variety of areas situated between 38 deg north and south latitude. SIR-A data was optically recorded onboard the Shuttle, and it was subsequently correlated on the ground to produce imagery with a 50 kilometer swath width and a surface resolution of approximately 40 meters. The SIR is presently being upgraded into a new configuration termed SIR-B, in which the radar's antenna can be mechanically rotated in the Shuttle's payload bay during an orbital mission. SIR-B is currently scheduled for flight on the seventeenth Shuttle mission (STS-17) that is tentatively planned for August 1984. In its new configuration, the SIR-B can be used to image selected regions at different angles of incidence ranging from 15 deg to 60 deg (as measured from the local vertical). In principle, multiple incidence angle radar imagery of selected areas can be coregistered and used to differentiate surficial materials on the basis of their roughness characteristics. This procedure is conceptually similar to the use of multispectral imagery acquired at shorter wavelengths to discriminate surficial materials on the basis of their pigmentation.

Monson, R.↗