Search NASA⌕ Search

SEARCH · Search NASA

Results for “RADIATION SOURCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

A time dependent difference theory for sound propagation in ducts with flow

A time dependent numerical solution of the linearized continuity and momentum equation is developed for sound propagation in a two-dimensional straight hard or soft wall duct with a sheared mean flow. The time dependent governing acoustic-difference equations and boundary conditions are developed along with a numerical determination of the maximum stable time increments. The analysis begins with a harmonic noise source radiating into a quiescent duct. This explicit iteration method then calculates stepwise in real time to obtain the transient as well as the 'steady' state solution of the acoustic field. Example calculations are presented for sound propagation in hard and soft wall ducts, with no flow and with plug flow. Although the problem with sheared flow has been formulated and programmed, sample calculations have not yet been examined. So far, the time dependent finite difference analysis has been found to be superior to the steady state finite difference and finite element techniques because of shorter solution times and the elimination of large matrix storage requirements.

Baumeister, K. J.↗
NASA NTRS1980

Time dependent difference theory for sound propagation in axisymmetric ducts with plug flow

The time dependent governing/acoustic-difference equations and boundary conditions are developed and solved for sound propagation in an axisymmetric (cylindrical) hard wall duct with a plug mean flow and spinning acoustic modes. The analysis begins with a harmonic sound source radiating into a quiescent duct. This explicit iteration method then calculates stepwise in real time to obtain the transient as well as the 'steady' state solutions of the acoustic field. The time dependent finite difference analysis has two advantages over the steady state finite difference and finite element techniques: (1) the elimination of large matrix storage requirements, and (2) shorter solution times under most conditions.

Baumeister, K. J.↗
NASA NTRS1979

Mars ultraviolet simulation facility

A facility was established for long-duration ultraviolet (UV) radiation exposure of natural and synthetic materials in order to test hypotheses concerning Martian soil chemistry observed by the Viking Mars landers. The system utilized a 2500 watt xenon lamp as the radiation source, with the beam passing through a heat-dissipating water filter before impinging upon an exposure chamber containing the samples to be irradiated. The chamber was designed to allow for continuous tumbling of the samples, maintenance of temperatures below 0 C during exposure, and monitoring of beam intensity. The facility also provided for sample preparation under a variety of atmospheric conditions, in addition to the Mars nominal. As many as 33 sealed sample ampules have been irradiated in a single exposure. Over 100 samples have been irradiated for approximately 100 to 700 h. The facility has performed well in providing continuous UV irradiation of multiple samples for long periods of time under simulated Mars atmospheric and thermal conditions.

Zill, L. P.↗
NASA NTRS1980

Vacuum-ultraviolet spectral-irradiance calibrations - Method and applications

The study deals with a method of calibrating the spectral irradiance of an unknown radiation source based on an existing standard source of spectral radiance. The method is applied to several sources that are being applied as irradiance sources in various experimental situations, e.g., on board the Space Shuttle.

Ott, W. R.↗
NASA NTRS1980

Materials for fire resistant passenger seats in aircraft

The paper considers the selection of cushioning foam and upholstery fabric materials for aircraft passenger seats. Polyurethane, polychloroprene, polyimide, and polyphosphazene are the foam materials considered; and a variety of commercial and developmental fabrics (including wool, cotton, synthetics, and blends) are examined. Viable approaches to the design of fire-resistant seat assemblies are indicated. Results of an experimental laboratory study of fabrics and fabric/foam assemblies exposed to external point-source radiative heat flux are discussed.

Tesoro, G.↗
NASA NTRS1980

Radiometric observations of the 752.033-GHz rotational absorption line of H2O from a laboratory jet

With the aid of a high-resolution two-stage heterodyne radiometer, spectral absorption measurements of the 752.033 GHz line of water vapor were carried out, using a blackbody continuum as a background radiation source for investigating the absorptive properties of the H2O content of high altitude rocket plumes. To simulate this physical situation in a laboratory environment, a small steam jet was operated within a large high-vacuum chamber, with the H2O jet plume traversing the radiometer line of sight. The experiments verified that this rotational line is optically thick, with excitation temperatures below 100 K, in the downstream part of the plume, as predicted by theoretical modelling.

Dionne, G. F.↗
NASA NTRS1981

Influence of exit impedance on finite difference solutions of transient acoustic mode propagation in ducts

The time-dependent governing acoustic-difference equations and boundary conditions are developed and solved for sound propagation in an axisymmetric (cylindrical) hard-wall duct without flow and with spinning acoustic modes. The analysis begins with a harmonic sound source radiating into a quiescent duct. This explicit iteration method then calculates stepwise in real time to obtain the steady solutions of the acoustic field. The transient method did not converge to the steady-state solution for cutoff acoustic duct modes. This has implications as to its use in a variable-area duct, where modes may become cutoff in the smal-area portion of the duct. For single cutoff mode propagation the steady-state impedance boundary condition produced acoustic reflections during the initial transient that caused finite instabilities in the numerical calculations. The stability problem is resolved by reformulating the exit boundary condition. Example calculations show good agreement with exact analytical and numerical results for forcing frequencies above, below, and nearly at the cutoff frequency.

Baumeister, K. J.↗
NASA NTRS1981

Lyman-alpha fluorescence from hydrogen photofragments of CH4 and H2O

The process of H-Lyman-alpha fluorescence produced through photodissociation of CH4 and H2O provides an example for the usefulness of the detection of fluorescence of dissociation fragments as an aid in identifying some high lying Rydberg states. In the first experiment reported, an electron storage ring synchrotron radiation source was used. The fluorescence produced was detected with a solar blind photomultiplier and a Cs photocathode with a spectral sensitivity in the wavelength range from 1050 to 1950 A. In the second experiment considered, an intense atomic line source was employed.

Wu, C. Y. R.↗
NASA NTRS1981

High-resolution extreme-ultraviolet spectroscopy of potassium using anti-Stokes radiation

The use of a new extreme-ultraviolet radiation source based on spontaneous anti-Stokes scattering for high-resolution absorption spectroscopy of transition originating from the 3p6 shell of potassium is reported. The region from 546.6 to 536.8 A is scanned at a resolution of about 1.2 Kayser. Within this region, four previously unreported lines are observed.

Rothenberg, J. E.↗
NASA NTRS1982

Line-profile and continuum variations of the contact binary SV Centauri

A total of five high and ten low dispersion UV spectra of the interacting contact binary SV Centauri obtained between 1979 and 1982 are analyzed. The low resolution observations cover the whole phase range, while a few selected phases were observed in high dispersion. The UV data were complemented with optical photometric and spectroscopic observations, in order to determine the tructure and absolute dimensions of the system. The profiles of prominent UV resonance and metastable lines undergo drastic changes with phase angle and time. Their overall appearance indicates relatively strong mass loss from the system, exhibiting pronounced variations of the stellar wind. The far UV continuum distribution suggests the presence of a luminous hot radiation source with maximum emission in the soft X-ray range, which is most apparently seen during the first quadrature phase, while it is weakest close to primary minimum. The case exchange and mass loss process as well as the evolutionary stage of SV Centauri are discussed.

Rahe, J.↗
NASA NTRS1982

X-ray diffraction from high pressure Ge using synchrotron radiation

The high pressure structural phase transition in Ge has been studied using the energy dispersive X-ray diffraction technique and a synchrotron radiation source. Ge was observed to transform to the beta-Sn tetragonal structure in agreement with the earlier results of Jamieson, but the phase transition began at 80 + or - 5 kilobars, a somewhat lower value than generally reported. These experimental diffraction results are compared with the recent self-consistent pseudopotential calculations of Yin and Cohen (1981) and with the observed transition pressure for shock wave loaded Ge.

Baublitz, M., Jr.↗
NASA NTRS1982

Comparison of evolving photovoltaic and nuclear power systems for earth orbital applications

Photovoltaic and fission reactor orbital power systems are compared in terms of the end-to-end system power-to-mass ratios. Three PV systems are examined, i.e., a solid substrate with a cell array and a NiCd battery, a modified SEP array and an NiH2 battery, and a 62-micron Si cell array and a fuel cell. All arrays were modeled to be 13.5% efficient and to produce 25 kW dc. The SP-100 reactor consists of the heat source, radiation shield, heat pipes to transfer thermal energy from the reactor to thermoelectric elements, and a waste heat radiator. Consideration is given to system applications in orbits ranging from LEO to GEO, and to mission durations of 1, 5, and 10 yr. PV systems are concluded to be flight-proven, useful out of radiation belts, and best for low to moderate power levels. Limitations exist for operations where atmospheric drag may become a factor and due to the size of a large PV power supply. Space nuclear reactors will continue under development and uses at high power levels and in low altitude orbits are foreseen.

Rockey, D. E.↗
NASA NTRS1983

High efficiency spectrographs for the EUV and soft X-rays

The use of grazing incidence optics and reflection grating designs is shown to be a method that improves the performance of spectrographs at wavelengths shorter than 1200 A. Emphasis is laid on spectroscopic designs for X ray and EUV astronomy, with sample designs for an objective reflection grating spectrograph (ORGS) and an echelle spectrograph for wavelengths longer than 100 A. Conical diffraction allows operations at grazing incidence in the echelle spectrograph. In ORGS, the extreme distance of X ray objects aids in collimating the source radiation, which encounters conical diffraction within the instrument, proceeds parallel to the optical axis, and arrives at the detector. A series of gratings is used to achieve the effect. A grazing echelle is employed for EUV observations, and offers a resolution of 20,000 over a 300 A bandpass.

Cash, W.↗
NASA NTRS1983

The large scale dust distribution in the inner galaxy

Initial results are presented from a new large-scale survey of the first quadrant of the galactic plane at wavelengths of 160, 260, and 300 microns. The submillimeter wavelength emission, interpreted as thermal radiation by dust grains, reveals an optically thin disk of angular width about 0.09 deg (FWHM) with a mean dust temperature of 23 K and significant variation of the dust mass column density. Comparison of the dust column density with the gas column density inferred from CO survey data shows a striking spatial correlation. The mean luminosity per hydrogen atom is found to be 2.5 x 10 to the -30th W/H, implying a radiant energy density in the vicinity of the dust an order of magnitude larger than in the solar neighborhood. The data favor dust in molecular clouds as the dominant submillimeter radiation source.

Hauser, M. G.↗
NASA NTRS1983

Microwave holographic surface measurement of the Tidbinbilla 64-m antenna

The use of a holographic technique for accurately measuring the surface figure of the Tidbinbilla (Canberra, Australia) 64-m antenna is described. Described by Bennet et al. (1976) and Scott and Ryle (1977), the technique consists of measuring the complex far-field response of the antenna at a single frequency using a terrestrial, satellite-borne or celestial radiation source of small angular diameter. This two-dimensional pattern is then Fourier transformed to yield the complex illumination function across the antenna aperture; antenna surface deviations are manifested as phase fluctuations in this function. The speed and low cost of using the technique are real advantages where observing schedules with the telescopes are heavily subscribed. For the 64-m antenna, the unweighted rms surface deviation is found to be about 1.8 mm; when weighted by the radial amplitude taper it is about 1.1 mm. Two earlier estimates by other methods had yielded tolerances of about 1.2 mm rms and 1.1 mm rms. It is planned to use the technique to survey the 22-m antennas of the Australian Telescope accurate to approximately 0.1 mm rms near 10 Ghz.

Rahmat-Samii, Y.↗
NASA NTRS1984

Technology for satellite power conversion

Techniques for satellite electromagnetic energy transfer and power conversion at millimeter and infrared wavelengths are discussed. The design requirements for rectenna receiving elements are reviewed for both coherent radiation sources and Earth thermal infrared emission. Potential power transmitters including gyrotrons, free electron lasers, and CO2 lasers are assessed along with the rectification properties of metal-oxide metal diode power converters.

Campbell, D. P.↗
NASA NTRS1984

Observed Spatial Properties of the Solar Eigenfunctions and the Implications for the Existence of Resolved Multiplets

Solar oscillations are manifested in the solar atmosphere as spatial and temporal perturbations in the local thermodynamical and mechanical properties. When measuring the solar radius/diameter, these perturbations enter the observation through changes in the radiative source function and opacity at the extreme limb. When compared to the disk center, the observable portion of these perturbations is changed in spatial character by projection effects and oblique optical depth geometry. The time varying solar radius signal at SCLERA (Santa Catalina Laboratory for Experimental Relativity) is produced by an edge definition sensitive to the resultant changes in the spatial shape of the limb intensity profile. An attempt is made to further determine the shape and properties of the limb signals which display global solar oscillations.

Caudell, T. P.↗
NASA NTRS1983

Heterodyne applications of tunable semiconductor diode lasers

Infrared tunable diode lasers were developed in the 1960s and have been a valuable radiation source for high resolution laboratory and in situ spectroscopy. Use of Pb-salt Tunable Diode Lasers (TDL) in heterodyne applications impose stringent requirements on the TDL not normally required for laboratory spectroscopy. A review will be made of progress associated with TDLs in such heterodyne applications. Areas addressed will include such items as lifetime, operating temperature, and factors affecting excess noise. The review will emphasize the experience at Langley Research Center, but will include material from other users. The Langley information will include a description and current status of the Laser Heterodyne Spectrometer experiment and atmospheric solar absorption data obtained from a groundbased heterodyne system.

Sidney, B. D.↗