Search NASA⌕ Search

SEARCH · Search NASA

Results for “ROTATING CYLINDER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Robot Hand Grips Cylinders Securely

Jaws and linkage accommodate various sizes. Robot hand includes two pairs of parallel jaws that grasp rods, pipes, tubes, struts, and other long, heavy cylindrical objects. Hand features compact rotary drive and butterfly configuration simplifying approach and gripping maneuvers of robot. Parallelogram linkages maintain alignment of each jaw with other jaws. One bar of each linkage connected to one of two concentric, counterrotating shafts; rotation of shafts moves jaws in each pair toward or away from each other to grasp or release workpiece. Each jaw includes rigid gripping pad lined with rubber to give firm grip and to prevent damage to workpiece. Inner cylindrical surface (corner) of each jaw tapers off to flat sides. Enables jaw to grasp workpieces with diameters larger than or equal to twice the corner radius.

Parma, George F.↗
NASA NTRS1984

Interactive modeling using the PATRAN-G program

PATRAN-G is an interactive finite element generating and graphics display program. The program is currently executable on the VAX or PRIME computers and is compatible with 19 commercially available graphics terminals. The PATRAN program can be used in two modes: generation of a finite element model, or postprocessing of output data from a finite element analysis program. The finite element generating mode is divided into two phases. Phase I is the geometry construction. During this phase, the geometric boundaries of the model are defined and the material properties are input. Mirror imaging, translation and scaling of lines, surfaces, and volumes, and rotation of regions permit the geometry to be described efficiently. Points may be defined in alternate rectangular, cylindrical, or spherical coordinate systems. Also, PATRAN-G can calculate the intersection of lines or surfaces. This capability allows a user to easily model, for example, the intersection of a cylinder which cuts through a sphere at an angle. Once the geometry of the model has been described in terms of points, lines, surfaces, and volumes. Phase II is used to generate the computer finite element model.

Stalnaker, W. A.↗
NASA NTRS1993

Electromagnetically driven relativistic jets - A class of self-consistent numerical solutions

We explore the generalized Grad-Shafranov (GS) equation (Lovelace et al. 1986), which describes the cross-field balance of the magnetic flux surfaces in a stationary, axisymmetric, cold relativistic MHD wind. We construct a family of self-consistent, jet-type, non-self-similar solutions in which flux surfaces thread the equatorial plane vertically and are eventually collimated into nested cylinders. These solutions conserve the total energy and angular momentum along each flux surface and satisfy the relativistic GS equation in the cross-field direction. We find that the total specific energy in the flow depends primarily on a dimensionless combination of the poloidal magnetic flux, the rotation, and the mass loading rate, which reduces to Michel's (1969) magnetization parameter for radial winds. The final width of the flow and its ratio of kinetic energy flux to Poynting flux depend sensitively on the pressure distribution of the ambient medium, which is required to contain the jet at its outer edge when no jet-confirming external toroidal magnetic field is present. Furthermore, we show that the magnetic pressure in the flow can be much higher near the axis than close to the edge, reflecting the 'pinching' effect of the toroidal magnetic field.

Li, Zhi-Yun↗
NASA NTRS1999

Auto-adjustable pin tool for friction stir welding

An auto-adjusting pin tool for friction stir welding is presented wherein the pin tool automatically adjusts for welding materials of varying thicknesses, and the pin can be incrementally withdrawn from the workpieces thus eliminating any crater or keyhole in the weld. The inventive apparatus is comprised of a welding head housing a motor connected to a controller instrument package and an arbor supported by bearings. The arbor forms an interior cylinder and is encircled by a stationary slip ring though which are ported hydraulic passageways into the interior cylinder of the arbor such that a piston housed therein may be moved axially. Coupled to the piston is a pin tool which is treaded on its lower end and which is moveably seated in, and extending through, a shoulder housing having concave lower face. When welding, the rotating treaded end of the pin enters and stirs the workpieces while the lower face of the shoulder housing compacts the workpieces. As the welding head traverses the shoulder housing the controller senses any rising pressure on the lower face of the shoulder housing and withdraws the arbor to keep the pressure constant. At the same time, the piston moves towards the workpieces thus extending the pin further from the shoulder. This keeps the pin at a proper depth in the workpieces regardless of their thicknesses. As the weld terminates this same operation can be used to incrementally withdraw the pin during the final part of the traverse, thus eliminating any keyhole or crater that would otherwise be created.

Ding, R. Jeffrey↗
NASA NTRS1995

Three-dimensional transient flow of spin-up in a filled cylinder with oblique gravity force

Three-dimensional transient flow profiles of spin-up in a fully liquid filled cylinder from rest with gravity acceleration at various direction are numerically simulated and studied. Particular interests are concentrated on the development of temporary reverse flow zones and Ekman layer right after the impulsive start of spin-up from rest, and decay before the flow reaching to the solid rotation. Relationship of these flow developments and differences in the Reynolds numbers of the flow and its size selection of grid points concerning the numerical instabilities of flow computations are also discussed. In addition to the gravitational acceleration along the axial direction of the cylindrical container, a series of complicated flow profiles accompanied by three-dimensional transient flows with oblique gravitational acceleration has been studies.

Hung, R. J.↗
NASA NTRS2006

High-Energy Emission From the Polar Cap and Slot Gap

Thirty-five years after the discovery of rotation-powered pulsars, we still do not understand the fundamentals of their pulsed emission at any wavelength. I will review the latest developments in understanding the high-energy emission of rotation-powered pulsars, with particular emphasis on the polar cap and slot gap models. Special and general relativistic effects play important roles in pulsar emission, from inertial frame-dragging near the stellar surface to aberration, time-of-flight and retardation of the magnetic field near the light cylinder. Understanding how these effects determine what we observe at different wavelengths is critical to unraveling the emission physics. I will discuss how the next generation of gamma-ray detectors, AGILE and GLAST, will test prediction of these models.

Harding, Alice K.↗
DOE OSTI2024

Next Gen High Efficiency Boosted Engine Development

This work represents an advanced engineering research project partially funded by the U.S. Department of Energy (DOE). Ford Motor Company, FEV North America, and Oak Ridge National Laboratory collaborated to develop a next generation boosted spark ignited engine concept. The project goals, specified by the DOE, were 23% improved fuel economy and 15% reduced weight relative to a 2015 or newer light-duty vehicle. The fuel economy goal was achieved by designing an engine incorporating high geometric compression ratio, high dilution tolerance, low pumping work, and low friction. The increased tendency for knock with high compression ratio was addressed using early intake valve closing (EIVC), cooled exhaust gas recirculation (EGR), an active pre-chamber ignition system, and careful management of the fresh charge temperature. Engine weight reduction measures were implemented throughout the engine system making use of composite materials, advanced manufacturing techniques, and architectural choices. This report outlines the analytical, design, fabrication, and test work conducted for the duration of the project. The combustion system stability, EGR tolerance, and knock resistance were validated on a single cylinder engine. An inline six-cylinder engine was then designed targeting application in the Ford F150. Multi-cylinder engines were produced and tested achieving the target vehicle fuel economy improvement of 23% assessed using measured engine fuel consumption combined with a vehicle drive cycle simulation. Actions were identified and designs were demonstrated to achieve the 15% weight reduction target. This project included items covering a range of technology readiness levels. Some of the technologies explored are production ready, while others were investigated to understand the limitations for what can be achieved in a stoichiometric, gasoline-fueled, spark-ignited internal combustion engine.

42 ENGINEERING↗
NASA NTRS1988

A numerical study of bifurcations in a barotropic shear flow

In the last few years, more and more evidence has emerged suggesting that transition to turbulence may be viewed as a succession of bifurcations to deterministic chaos. Most experimental and numerical observations have been restricted to Rayleigh-Benard convection and Taylor-Couette flow between concentric cylinders. An attempt is made to accurately describe the bifurcation sequence leading to chaos in a 2-D temporal free shear layer on the beta-plane. The beta-plane is a locally Cartesian reduction of the equations describing the dynamicss of a shallow layer of fluid on a rotating spherical planet. It is a valid model for large scale flows of interest in meteorology and oceanography.

Huerre, P.↗
NASA NTRS1989

Two-component phase-averaged turbulence statistics downstream of a rotating spoked-wheel wake generator

Flow-field measurements of unsteady turbulent flow downstream of a rotating spoked-wheel wake generator were performed in a short-duration light-piston tunnel, and the instantaneous-velocity data were phase averaged based on a signal synchronized with the bar-passing frequency. Mean axial velocities were found to agree well with those obtained from measurements behind a stationary cylinder and to be independent of both Reynolds and bar-passing Strouhal numbers. Reynolds stresses were found to be consistent with related cylinder-wake measurements, but were significantly higher than corresponding measurements obtained in large-scale research turbomachines. Phase-averaged triple velocity correlations were calculated from the digital velocity records, revealing the sign and the magnitude of skewness in the velocity probability density distributions for the two components.

O'Brien, J. E.↗
NASA NTRS1939

Compression-ignition engine performance with undoped and doped fuel oils and alcohol mixtures

Several fuel oils, doped fuel oils, and mixtures of alcohol and fuel oil were tested in a high-speed, single-cylinder, compression-ignition engine to determine power output, fuel consumption, and ignition and combustion characteristics. Fuel oils or doped fuel oils of high octane number had shorter ignition lags, lower rates of pressure rise, and gave smoother engine operation than fuel oils or doped fuel oils of low octane number. Higher engine rotative speeds and boost pressures resulted in smoother engine operation and permitted the use of fuel oils of relatively low octane number. Although the addition of a dope to a fuel oil decreased the ignition lag and the rate of pressure rise, the ensuing rate of combustion was somewhat slower than for the undoped fuel oil so that the effectiveness of combustion was practically unchanged. Alcohol used as an auxiliary fuel, either as a mixture or by separate injection, increased the rates of pressure rise and induced roughness. In general, the power output decreased as the proportion of alcohol increased and, below maximum power, varied with the heating value of the total fuel charge.

Moore, Charles S↗
DOE OSTI2023

Pressure shifted valve timing

A hydraulic pump-motor includes a cylinder block including a plurality of fluid chambers, a piston in each of the fluid chambers, a cam, a fixed valve area profile, and a timing adjustment actuator. The cam includes a cam surface that engages the pistons and drives movement of the pistons relative to the fluid chambers in response to relative rotation between the cam and the fluid chambers. The fixed valve area profile is configured to control fluid flows between the fluid chambers and first and second ports. The timing adjustment actuator is configured to adjust an angular orientation of the fixed valve area profile relative to an angular orientation of the cam based on a pressure differential between a pressure at the first port and a pressure at the second port.

Boyce-Erickson, Grey C.↗
DOE OSTI2021

W7-X and the sawtooth instability: towards realistic simulations of current-driven magnetic reconnection

Magnetic reconnection in W7-X is studied by means of global numerical simulations in a series of models of increasing complexity. The magnetic geometry ranges from that of a cylinder to the full three-dimensional field of W7-X, and the equations solved range from ideal magnetohydrodynamics (MHD) to gyrokinetics. We simulate plasmas from the first operation phase with electron cyclotron current drive (ECCD). These are characterized by an equilibrium magnetic field featuring an ECCD-distorted 'humped' profile of the rotational transform ι, with ι = 1 in two radial locations. Such plasmas generally show sawtooth activity, hence motivating the present study. We pay particular attention to the role of equilibrium current density gradients in the destabilization of reconnecting modes. When the equilibrium temperature and density gradients are artificially suppressed (to eliminate the pressure gradient drive), the perturbed electrostatic potential is radially localized between the locations at which ι = 1. This is shown with a purely collisionless gyrokinetic model, in cylindrical geometry. In the real toroidal geometry of W7-X, for a non-ideal MHD model including a uniform resistivity, electron inertia and (numerical) viscosity, the same qualitative behaviour is observed. In particular, even if a resonant (m, n) = (1, -1) perturbation is initialized, the most unstable mode is the (m, n) = (-4, 4), where m and n are the poloidal and toroidal mode numbers, respectively. Other modes are destabilized due to geometric coupling. The growth rate of this instability scales as η 1/3 , where η is the plasma resistivity, thus suggesting that ECCD drives ideal MHD stable W7-X plasmas towards non-ideal marginality. An ideal magnetohydrodynamic analysis confirms the result. A fluid-kinetic hybrid version of the EUTERPE code shows that gyrokinetic ions have a stabilizing effect on these modes. For W7-X relevant collisionalities, the growth rate scales linearly with the electron skin depth, d e . Implications of our results for sawtoothing W7-X operation are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1991

Measurements of radar backscatter from an artificial tree - An indication of azimuthal variations and polarization sensitivity of trees

Measurements of radar backscatter from an artificial tree were made in the laboratory at 6 and 10 GHz at horizontal incidence. The system had a resolution cylinder 18 cm in diameter and 11 cm long, so about half of the tree (30.5 cm high) was within the beam. The mean returned power from the target with leaves was always higher than that from the target without leaves, as expected. The signal faded with an exponential distribution when the artificial tree was rotated about its trunk, with no angular trend apparent. When the leaves were present, tilted polarizations gave results favoring an angle corresponding with that of the branches. When leaves were absent, the trunk of the tree dominated the radar backscatter at all polarizations.

Moore, R. K.↗
NASA NTRS1992

Solution of the Burnett equations for hypersonic flows near the continuum limit

The INCA code, a three-dimensional Navier-Stokes code for analysis of hypersonic flowfields, was modified to analyze the lower reaches of the continuum transition regime, where the Navier-Stokes equations become inaccurate and Monte Carlo methods become too computationally expensive. The two-dimensional Burnett equations and the three-dimensional rotational energy transport equation were added to the code and one- and two-dimensional calculations were performed. For the structure of normal shock waves, the Burnett equations give consistently better results than Navier-Stokes equations and compare reasonably well with Monte Carlo methods. For two-dimensional flow of Nitrogen past a circular cylinder the Burnett equations predict the total drag reasonably well. Care must be taken, however, not to exceed the range of validity of the Burnett equations.

Imlay, Scott T.↗
NASA NTRS1961

Wind-Tunnel Tests of Seven Static-Pressure Probes at Transonic Speeds

Wind-tunnel tests have been conducted to determine the errors of 3 seven static-pressure probes mounted very close to the nose of a body of revolution simulating a missile forebody. The tests were conducted at Mach numbers from 0.80 to 1.08 and at angles of attack from -1.7 deg to 8.4 deg. The test Reynolds number per foot varied from 3.35 x 10(exp 6) to 4.05 x 10(exp 6). For three 4-vane, gimbaled probes, the static-pressure errors remained constant throughout the test angle-of-attack range for all Mach numbers except 1.02. For two single-vane, self-rotating probes having two orifices at +/-37.5 deg. from the plane of symmetry on the lower surface of the probe body, the static-pressure error varied as much as 1.5 percent of free-stream static pressure through the test angle-of- attack range for all Mach numbers. For two fixed, cone-cylinder probes of short length and large diameter, the static-pressure error varied over the test angle-of-attack range at constant Mach numbers as much as 8 to 10 percent of free-stream static pressure.

Capone, Francis J.↗
NASA NTRS1975

A flying hot wire study of the turbulent near wake of a circular cylinder at Reynolds number of 140,000

The phenomenology was studied of the processes of vortex formation and transport in the near wake, at a Reynolds number sufficiently high to insure a fully turbulent wake, but low enough to insure a laminar separation. The apparatus developed for measuring this flow consisted of X-array hot wire probes mounted on the ends of a pair of whirling arms. A computer controlled data acquisition system was slaved to the position of the rotating arm and managed, monitored, edited, and recorded the vast profusion of data which is continuously poured out by the device. Results are presented which show the instantaneous velocity, intermittency, vorticity, and stress fields as a function of phase for the first six diameters of the near wake. The stresses in the near wake emerge as a concatenation of peaks and valleys, some the result of strong induced motions in the outer flow which cause free stream fluid to move rapidly inward toward the center of the wake, others the result of the random motions of the background turbulence.

Cantwell, B. J.↗
NASA NTRS2005

Bridgman Growth of Germanium Crystals in a Rotating Magnetic Field

A series of (100)-oriented gallium-doped germanium crystals has been grown by the vertical Bridgman method and under the influence of a rotating magnetic field (RMF). Time-dependent flow instabilities occur when the critical magnetic Taylor number (Tm(sup c)) is exceeded, and this can be observed by noting the appearance of striations in the grown crystals. Tm(sup c) decreases as the aspect ratio of the melt increases, and approaches the theoretical limit expected for an infinite cylinder. Intentional interface demarcations are introduced by pulsing the RMF on and off The RMF has a marked affect on the interface shape, changing it from concave to nearly flat as the RMF strength is increased.

Volz, M. P.↗
DOE OSTI2020

Temporal dynamics of large-scale structures for turbulent Rayleigh–Bénard convection in a moderate aspect-ratio cylinder

We investigate the spatial organization and temporal dynamics of large-scale, coherent structures in turbulent Rayleigh–Bénard convection via direct numerical simulation of a 6.3 aspect-ratio cylinder with Rayleigh and Prandtl numbers of 9.6×10 7 and 6.7, respectively. Fourier modal decomposition is performed to investigate the structural organization of the coherent turbulent motions by analysing the length scales, time scales and the underlying dynamical processes that are ultimately responsible for the large-scale structure formation and evolution. We observe a high level of rotational symmetry in the large-scale structure in this study and that the structure is well described by the first four azimuthal Fourier modes. Two different large-scale organizations are observed during the duration of the simulation and these patterns are dominated spatially and energetically by azimuthal Fourier modes with frequencies of 2 and 3. Studies of the transition between these two large-scale patterns, radial and vertical variations in the azimuthal energy spectra, as well as the spatial and modal variations in the system's correlation time are conducted. Rotational dynamics are observed for individual Fourier modes and the global structure with strong similarities to the dynamics that have been reported for unit aspect-ratio domains in prior works. It is shown that the large-scale structures have very long correlation time scales, on the order of hundreds to thousands of free-fall time units, and that they are the primary source for a horizontal inhomogeneity within the system that can be observed during a finite, but a very long-time simulation or experiment.

42 ENGINEERING↗