Results for “Regolith” — Page 21

NASA NTRSDate not supplied

Electrostatic Regolith Interaction Experiment (ERIE) Electrometer Initial Flight Results

The Electrostatic Regolith Interaction Experiment (ERIE) is a suborbital flight payload studying electrostatically charged dust particle dynamics under microgravity, jointly developed by University of Central Florida (UCF) and NASA Kennedy Space Center (KSC). ERIE combines components from two systems, the COLLisions Into Dust Experiment (COLLIDE) from UCF and the Wheel Electrostatic Spectrometer (WES) from NASA KSC, to advance understanding of charged grain behavior on low gravity bodies such as the Moon and asteroids. ERIE slides a door containing an electrometer system monitoring various insulating disks across the surface of a regolith simulant bed. The experiment is activated when the payload enters the microgravity potion of the flight. The grains in the simulant bed tribocharge via agitation during launch as well as through frictional interactions with the door and its protruding insulators. As the retention door retracts, particles are allowed to loft into an open volume, achieving motion due to electrostatic repulsion. The electrometer system measures the charge transfer between the granular material and the insulators. As the charged grains exit the bed, they travel through an applied electric field and a camera observes the kinematics of the individual grains whose trajectories are determined by their net charges. The design of the ERIE electrometer instrument and initial results from the first flight was presented at the 2021 AGU Fall Meeting under P55E-2002. Shortly after microgravity was achieved and the retaining door began to open, the rate of charge acquisition measured by the electrometer increased, indicating the insulators were accumulating triboelectric charge. Charged grains were observed in the video data to traverse across the external electric field and become deflected from a linear path due to their charges. Pairs of grains were also observed to orbit one another as expected from two oppositely charged bodies in proximity to one another. Improvements to the design of the instrument and preliminary results obtained from the second flight scheduled for Q3 2022 will be presented at this meeting.

Electrostatics↗

NASA NTRSDate not supplied

Electrostatic Regolith Interaction Experiment (ERIE) Electrometer Initial Flight Results

The Electrostatic Regolith Interaction Experiment (ERIE) is a suborbital flight payload studying electrostatically charged dust particle dynamics under microgravity, jointly developed by University of Central Florida (UCF) and NASA Kennedy Space Center (KSC). ERIE combines components from two systems, the COLLisions Into Dust Experiment (COLLIDE) from UCF and the Wheel Electrostatic Spectrometer (WES) from NASA KSC, to advance understanding of charged grain behavior on low gravity bodies such as the Moon and asteroids. ERIE slides a door containing an electrometer system monitoring various insulating disks across the surface of a regolith simulant bed. The experiment is activated when the payload enters the microgravity potion of the flight. The grains in the simulant bed tribocharge via agitation during launch as well as through frictional interactions with the door and its protruding insulators. As the retention door retracts, particles are allowed to loft into an open volume, achieving motion due to electrostatic repulsion. The electrometer system measures the charge transfer between the granular material and the insulators. As the charged grains exit the bed, they travel through an applied electric field and a camera observes the kinematics of the individual grains whose trajectories are determined by their net charges. The design of the ERIE electrometer instrument and initial results from the first flight was presented at the 2021 AGU Fall Meeting under P55E-2002. Shortly after microgravity was achieved and the retaining door began to open, the rate of charge acquisition measured by the electrometer increased, indicating the insulators were accumulating triboelectric charge. Charged grains were observed in the video data to traverse across the external electric field and become deflected from a linear path due to their charges. Pairs of grains were also observed to orbit one another as expected from two oppositely charged bodies in proximity to one another. Improvements to the design of the instrument and preliminary results obtained from the second flight scheduled for Q3 2022 will be presented at this meeting.

Electrostatics↗

NASA NTRSDate not supplied

Electrodynamic Regolith Conveyor Sub-Orbital Flight Experiment

The Electrodynamic Regolith Conveyor (ERC) is a technology that is being developed for soil sampling, beneficiation, specialized conveying applications and dust mitigation. The ERC is an extension of the Electrodynamic Dust Shield (EDS). The EDS has been developed for lenses, solar panels, radiators, fabric, and other applications and is scheduled for a technology demonstration mission on the Moon in 2024. The objective of the ERC sub-orbital flight experiment is to perform testing to advance the TRL of the ERC technology by measuring the regolith transport flow rate, power consumption and range of particle trajectories at four different inclinations in a simulated lunar gravity environment. This testing supports discrete element modeling efforts by grounding the simulations with test data.

Conveyor↗

NASA NTRSDate not supplied

Electrodynamic Regolith Conveyor Sub-Orbital Flight Experiment

The Electrodynamic Regolith Conveyor (ERC) is a technology that is being developed for soil sampling, beneficiation, specialized conveying applications and dust mitigation. The ERC is an extension of the Electrodynamic Dust Shield (EDS). The EDS has been developed for lenses, solar panels, radiators, fabric, and other applications and is scheduled for a technology demonstration mission on the Moon in 2024. The objective of the ERC sub-orbital flight experiment is to perform testing to advance the TRL of the ERC technology by measuring the regolith transport flow rate, power consumption and range of particle trajectories at four different inclinations in a simulated lunar gravity environment. This testing supports discrete element modeling efforts by grounding the simulations with test data.

Electrodynamic↗

NASA NTRSDate not supplied

Plant Watering in Low Gravity: The Study of the Fluid Dynamic Characteristics of Lunar Regolith Simulant for the Application of Crop Production Systems Using Scaled Capillary Devices

Bioregenerative life support is key to sustaining human life on the surface of other celestial bodies for missions beyond Low Earth Orbit (LEO). One example of such life support includes crop production systems capable of producing both plants and fungi for astronaut consumption. There have been numerous efforts to design and deploy such systems; however, there have been persistent fundamental issues with the water delivery systems. This study aims to understand and model the fluid dynamics of crop production systems to inform engineers about the key parameters needed for the design of such systems. The primary objective is to validate and expand upon NASA’s previous study, the Plant Water Management (PWM) experiments, to understand the fluid phenomena present in substrate-based systems. The model will then be expanded to include parameters for changing the test material of potential growth media as well as the varying water demands of the crop throughout its different stages in its life cycle. Specifically, this study is focused on the viability of using lunar regolith for agricultural purposes. Terrestrial-based scaled capillary models will be utilized to mimic the fluid phenomena occurring due to the low gravity environment seen on the lunar surface. Ultimately, the study will model the fluid flow present in the lunar regolith simulant and inform researchers on how to incorporate the material into crop production systems on the lunar surface.

gravity↗

NASA NTRS2021

Regolith Adaptive Modification Systems (Rams) - Final Report

Establishing human habitation on the Moon or Mars requires a palette of reaction chemistries for deconstructing extraterrestrial soils to extract structural metals, fuels, and propellants, as well as consolidating the soils into load-bearing forms. This report outlines progress related to the fundamental chemistry of in-situ resource utilization that is the focus of our Regolith Adaptive Modification System (RAMS) NIAC project. The RAMS concept is a breakthrough approach for preparing surfaces for early landing sites–and subsequent settlement operations–on the Lunar and Martian surface, among others. The RAMS concept is aligned with aspirations and capabilities of planned NASA Artemis mission. The approach is predicated on the sequential delivery of microcapsules onto lunar and Martian surfaces, which upon rupture, release payloads that react with regolith to yield geopolymerized subsurface slabs and surface high-strength steel skin and anchors . Through successively more exothermic reactions, we are seeking to build subsurface geopolymer slabs and use thermite reactions to constitute micro-alloyed advanced high-strength steel (AHSS) and Ti—Al—V pads on surfaces of planetary bodies, thereby circumventing the need for energy-intensive sintering technologies. As a precursor delivery system used to constitute landingpads, RAMS can be scaled for robotic, human-class, and more prominent (i.e., Starship) landers and will be configured within pressurized delivery systems that use radio beacons to outline coordinates for precision landings. Microcapsule delivery systems are designed to impel precursors (nanothermite mixtures and organosilanes), which activate in response to stress, heat, or impact to constitute deep geopolymerized slabs and AHSS skins. Dust mitigation is accomplished by reaction/solidification chemistry that yields a subsurface slab and advanced high-strength steel skin and anchors.

2021 NIAC Phase I↗

DOE OSTI2021

Microscopic ejecta measurements from hypervelocity impacts on aluminum and powdered regolith targets

Meteoroids and space debris pose a two-fold threat to spacecraft due to the risk of both mechanical damage from the impact and electrical damage from the impact-generated plasma, which produces electromagnetic emissions. Analysis of impact products, however, has the potential to provide useful information about planetary rings and small solar system bodies, such as asteroids and comets. Understanding the plasma dynamics and radiation mechanism is essential to addressing the impact threat and extracting science data from impacts. Charge attachment to condensed-phase debris may lead to a dusty plasma under certain conditions, so interpreting hypervelocity impacts requires knowledge of both the nature of the plasma and of the ejecta. We address the latter with measurements of the microscopic ejecta distribution produced by light gas gun impacts on solid aluminum and powdered regolith simulant targets. We examine both the size and shape of the ejecta using thin-film witness plates and find that the size distributions of microscopic ejecta follow power laws. Observations from the powdered regolith simulant match well with disruption experiments of solid basalt, while measurements from the aluminum impacts diverge from extrapolations based on studies of macroscopic debris. Analysis of the ejecta shape shows a transition from smooth to irregularly shaped ejecta at the material grain size, and the shape of debris may provide insight on the phase of the ejected material. Finally, based on our results, we predict a significant number of secondary impacts on plasma sensors due to ejecta, even at considerable distance from the target, supporting the hypothesis that charged dust affects plasma measurements in the ejecta curtain.

42 ENGINEERING↗

NASA NTRS1973

Analysis of the ultrafine fraction of the Apollo 14 regolith

Analyses were obtained on more than 2400 randomly selected particles from the sub-37 micron (ultrafine) fraction of ten Apollo 14 regolith samples. The analyses were conducted with an energy dispersive electron microprobe system. The semiquantitative data were used to group the particles into ten categories. The pyroxene/plagioclase and olivine/plagioclase ratios are inconsistent with those ratios in the Apollo 14 breccias and rocks. The data suggest that fragmented basalts similar to Apollo 12 olivine basalts may have made significant contributions to the ultrafine fraction of the Fra Mauro regolith. Among a number of unusual particles encountered are brown, birefringent lath-shaped grains with 60 wt % SiO2 and 34 wt % FeO(FeSi2O5) and a glass with 20 to 25 wt % CaO, 0 to 8 wt % MgO, 40 to 45 wt % Al2O3 and approximately 30 wt % SiO2.

Finkelman, R. B.↗

NASA NTRS1973

Ar-40/Ar-36 variations in Apollo 15 and 16 regolith

Values of Ar-40/Ar-36 have been determined for a large number of Apollo 15 and Apollo 16 fines, including samples from a range of depths in the Apollo 15 and 16 deep drill cores. Most of the Ar-40 in these samples is 'excess Ar-40' in that it has not been produced by in situ decay of K. Values of Ar-40/Ar-36 range from 0.74 to 4.35 and demonstrate that the regolith is not well mixed over depths of several cm or over surface distances greater than about 100 m. However, fines collected over surface distances of less than a few tens of meters tend to possess similar ratios. Values of Ar-40/Ar-36 in the Apollo 15 drill core increase with depth by nearly a factor of four (0.74 to 2.86) in the 0 to 80 cm depth range, then decrease for greater depths. Values of Ar-40/Ar-36 in the Apollo 16 drill core are nearly constant at about 1.3, except for the deepest sample analyzed (about 2.7). Concentrations of glass-bonded agglutinate particles in the fines tend to correlate with lower Ar-40/Ar-36, and may indicate that dynamic regolith processes also affect the trapped Ar-40/Ar-36.

Bogard, D. D.↗

NASA NTRS1973

Surface brightness temperatures at the Apollo 17 heat flow site - Thermal conductivity of the upper 15 cm of regolith

Lunar surface brightness temperatures derived as part of the Apollo 17 heat flow experiment are reported. Nighttime surface temperatures, calculated from the data provided by two thermocouples suspended about 15 cm above the lunar surface, are used to determine the conductivity profile of the upper 15 cm of regolith at the ALSEP site. The surface reaches a maximum temperature of 384 (plus or minus 6) K at lunar noon and cools to a minimum temperature of 102 (plus or minus 1.5 K) at the end of the lunar night. Conductivities of the order of .000015 W/cm-deg K are postulated for a 2-cm porous surface layer overlying more compact regolith material with conductivities in the range of .0001 to .00015 W/cm-deg K between 2 and 15 cm. A mean surface temperature of 216 (plus or minus 5) K is deduced from the thermocouple data. The 256 K temperature measured by the probe sensors at 130 cm thus indicates that a large mean temperature gradient exists at the Apollo 17 site.

Keihm, S. J.↗

NASA NTRS1974

Scanning electron microscopy of lunar regolith from the Sea of Fertility

Scanning electron microscopy was used in studying the morphology and cathodoluminescence of lunar regolith particles. Surface and structure of two groups of particles are differentiated: (1) Crystalline with well defined facets and spalling surfaces, which are grains of minerals and rock fragments: and (2) amorphous, fused, and partially or entirely glazed particles. Local melting of particles and the round openings on their surfaces are attributed to secondary influence on the regolith of factors of lunar weathering and above all micrometeoric impacts.

Antoshin, M. K.↗

NASA NTRS1974

Abundance of mercury in regolith of the Sea of Fertility, Sea of Tranquillity, and Ocean of Storms

The direct determination of mercury by the atomic fluorescent method is described, involving the pulsed thermal atomization of powdered samples when the mercury is vaporized in argon at normal pressure. An increase in the mercury abundance in the regolith of the surficial layer with decrease in grain size and with variation in depth was noted, from 6 minus 1 million the surficial layer to 9 minus 1 million percent at a depth of about 30 cm. It is shown that in conditions simulating lunar day, at temperatures of 130-150 C up to 15 to 20 percent of the mercury is vaporized from a 2 mg regolith weighed sample, and thus the hypothesis is advanced that mercury is adsorbed by the surface layers of the lunar surface material during lunar night and desorbed during lunar day. The assumption is advanced that there exists a meridional mercury wind between subsolar region of the moon (heater) and the polar regions (cooler).

Belyayev, Y. I.↗

NASA NTRS1974

Cathodoluminescence of regolith returned by Luna 16 automatic station

Observations of local variations in the intensity and spectral composition of the cathodoluminescence of lunar regolith are described. These variations are caused by structural features, by the kind and quantity of the material, and by the admixtures. In addition, cathodoluminescent emission is also associated with a change in the temperature of the lunar surface. Periodic diurnal illumination and darkening of the moon is responsible for a temperature gradient normal to the lines of longitude. These observations made of regolith, using a scanning electron microscope with an attachment for temperature variation, simulate the indicated thermal changes of the cathodoluminescent properties of lunar material.

Spivak, G. V.↗

NASA NTRS1974

Temperature emission spectrum of exoelectrons of lunar regolith

Thermostimulated exoelectronic emission of eight fragments of regolith returned by the Soviet Luna 16 automatic station was studied. The nature of the exoemission glove-curves was determined by particle type. Fragments of breccia, sinter, slag, anorthosite, glass plate, and leucocratic gabbro after the first heating disclosed a single exoemission maximum, whose temperature position is in the range 115 to 200 C. The data obtained indicate the complex and inhomogeneous energy structure of some regolith fragments. The presence of surface states capable of forming sorptive bonds can be assumed for most particles. The exoemission of anorthosite, olivine, and the glass spherule is due to the presence of formation defects at their surfaces.

Mints, R. I.↗

NASA NTRS1974

Loss of oxygen, silicon, sulfur, and potassium from the lunar regolith

The processes of formation and maturation of lunar soils lead to enrichments in the heavy stable isotopes of oxygen, silicon, sulfur, and potassium. The isotopic enrichment implies substantial losses of these elements from the moon. Vaporization by micrometeorite impact and by ion sputtering have removed at least 1% of the mass of the regolith. The losses of sulfur and potassium amount to at least 20-30% of their original abundance in the regolith.

Clayton, R. N.↗

NASA NTRS1974

Mixing of the lunar regolith

A probabilistic model for mixing and turnover rates for the lunar regolith due to meteoritic impact is presented and evaluated using results from laboratory impact experiments and estimated meteoritic fluxes. The upper millimeter of the lunar surface is shown to be the primary mixing zone in the regolith and an important source for impact melts and vapors. Below this 'mixing layer' the rate of mixing and turnover decreases very rapidly with increasing depth, consistent with well-preserved stratigraphy and resident times deduced from deep drill core tube samples.

Gault, D. E.↗

NASA NTRS1974

Solar wind and micrometeorite alteration of the lunar regolith

Developments in the understanding of reduction processes which occur in the lunar regolith as a result of solar-wind bombardment and micrometeorite impacts are discussed. The mechanism is described by which water released during reduction is removed from the lunar surface, and the possible contribution of solar-wind sputtering to the reduction process is considered. It is shown that the overall reduction efficiency of incoming hydrogen ions may reach several per cent, which is sufficient to produce all the metallic iron observed in the regolith. Mossbauer spectroscopic data on the amount of metallic iron present as isolated atoms or small clusters in reduced grain surfaces are presented together with data on the metallic iron content of fines samples obtained by Mossbauer spectroscopy, ferromagnetic resonance, and scanning as well as transmission electron microscopy. A portable magnetic probe is described which has been designed for determining surface-exposure age profiles in intact lunar core and drive-tube samples.

Housley, R. M.↗

NASA NTRS1976

Colloquium on Water in Planetary Regoliths, Hanover, N.H., October 5-7, 1976, Proceedings

The papers abstracted in this volume deal with the occurrence, detection, and measurement of water on planetary bodies in the solar system; relevant aspects of the terrestrial water balance; the most probable status of water on other planetary bodies; and the methods of water detection and measurement available for consideration in designing planetary exploration missions. Topics include the water inventory for earth, high-energy protons as an early source of regolith water, the evolution of water on Mars, the chemical evolution of the Martian atmosphere by surface weathering, some geochemical aspects of excess volatiles on Mars, fluvial erosion on Mars, water in the outer solar system, and the stability of water on the Galilean satellites. Other papers discuss gamma-ray attenuation methods for determining the water content of soil, Viking biology-experiment results relevant to water on Mars, IR detection of water ice on satellite surfaces during the Mariner Jupiter/Saturn mission, electrical sounding of the lunar regolith, the detection of water on the moon and Mars by orbital gamma-ray spectroscopy, and the Viking Martian soil-water analyzer.

Bowen, S.L.↗