SEARCH · Search NASA

Results for “Residue”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

All sources NASA NTRS DOE OSTI

NASA NTRS2016

Design Status of the Capillary Brine Residual in Containment Water Recovery System

One of the goals of the AES Life Support System (LSS) Project is to achieve 98% water loop closure for long duration human exploration missions beyond low Earth orbit. To meet this objective, the AES LSS Project is developing technologies to recover water from wastewater brine; highly concentrated waste products generated from a primary water recovery system. The state of the art system used aboard the International Space Station (ISS) has the potential to recover up to 85% water from unine wastewater, leaving a significant amounts of water in the waste brine, the recovery of which is a critical technology gap that must be filled in order to enable long duration human exploration. Recovering water from the urine wastewater brine is complicated by the concentration of solids as water is removed from the brine, and the concentration of the corrosive, toxic chemicals used to stabilize the urine which fouls and degrades water processing hardware, and poses a hazard to operators and crew. Brine Residual in Containment (BRIC) is focused on solids management through a process of "in-place" drying - the drying of brines within the container used for final disposal. Application of in-place drying has the potential to improve the safety and reliability of the system by reducing the exposure to crew and hardware to the problematic brine residual. Through a collaboration between the NASA Johnson Space Center and Portland Status University, a novel water recovery system was developed that utilizes containment geometry to support passive capillary flow and static phase separation allowing free surface evaporation to take place in a microgravity environment. A notional design for an ISS demonstration system was developed. This paper describes the concept for the system level design.

Callahan, Michael R.↗

NASA NTRS2013

Quantification of Residual Stress from Photonic Signatures of Fused Silica

A commercially available grey-field polariscope (GFP) instrument for photoelastic examination is used to assess impact damage inflicted upon the outer-most pane of Space Shuttle windows made from fused silica. A method and apparatus for calibration of the stress-optic coefficient using four-point bending is discussed. The results are validated on known material (acrylic) and are found to agree with literature values to within 6%. The calibration procedure is then applied to fused-silica specimens and the stress-optic coefficient is determined to be 2.43 +/- 0.54 x 10(exp -12)/Pa. Fused silica specimens containing impacts artificially made at NASA's Hypervelocity Impact Technology Facility (HIT-F), to simulate damage typical during space flight, are examined. The damage sites are cored from fused silica window carcasses and examined with the GFP. The calibrated GFP measurements of residual stress patterns surrounding the damage sites are presented. Keywords: Glass, fused silica, photoelasticity, residual stress

Cramer, K. Elliott↗

NASA NTRS2016

High-Order Residual-Distribution Schemes for Discontinuous Problems on Irregular Triangular Grids

In this paper, we develop second- and third-order non-oscillatory shock-capturing hyperbolic residual distribution schemes for irregular triangular grids, extending our second- and third-order schemes to discontinuous problems. We present extended first-order N- and Rusanov-scheme formulations for hyperbolic advection-diffusion system, and demonstrate that the hyperbolic diffusion term does not affect the solution of inviscid problems for vanishingly small viscous coefficient. We then propose second- and third-order blended hyperbolic residual-distribution schemes with the extended first-order Rusanov-scheme. We show that these proposed schemes are extremely accurate in predicting non-oscillatory solutions for discontinuous problems. We also propose a characteristics-based nonlinear wave sensor for accurately detecting shocks, compression, and expansion regions. Using this proposed sensor, we demonstrate that the developed hyperbolic blended schemes do not produce entropy-violating solutions (unphysical stocks). We then verify the design order of accuracy of these blended schemes on irregular triangular grids.

Mazaheri, Alireza↗

NASA NTRS2019

The Analysis of Adhesive Residue Failure

Adhesives have always been, and will continue to be, a crucial component of assembling flight hardware. Unfortunately, adhesives have a long standing history of being a source of costly contaminations. There are currently no existing documents that can aid a technician in discerning the proper adhesive/substrate combinations, nor the optimal solvent to use when removing adhesive residue. This project seeks to evaluate the performance of adhesive tapes on various flight hardware substrates in order to create an easy-to-use guide for spacecraft ground processing. The analyses performed were the adhesive/solvent solubility, SEM examinations, and peel adhesion tests. The solubility tests showed that amyl acetate, acetone, and MEK were the most successful in dissolving the adhesives. The SEM data gives preliminary insight into the morphology of the residues. Lastly, the peel adhesion testing proved that there is no relationship between the length of time the adhesive was applied and its adhesive strength.

Smiley, Adrienne↗

NASA NTRS2016

Performance of Silica Gel in the Role of Residual Air Drying. Part II.

Removal of carbon dioxide (CO2) is a necessary step in air revitalization and is often accomplished with sorbent materials. Since moisture competes with CO2 in zeolite sorbent materials, it is necessary to remove the water first. This is typically accomplished in two stages: “bulk” removal and “residual” drying. Silica gel is used as the bulk drying material in the Carbon Dioxide Removal Assembly (CDRA) in operation on the ISS (International Space Station). There has been some speculation that silica gel may also be capable of serving as both bulk and residual drying material to reduce system mass and Foreign Object Debris (FOD). Previous research tested silica gel alone as drying material. However, the silica gel volume used was not comparable to the current amount used on the CDRA. Therefore, the tests were repeated with the new silica gel volume. This paper discusses the fabrication and assembly of the modified canister to accommodate the new volume, the testing, and the evaluation of the test results.

Air Revitalization↗

NASA NTRS2020

Effect of Material Porosity on Residual Stress in an Additive Manufacturing Simulation using the Generalized Method of Cells

The effect of material porosity on final part distortion and residual stresses in a selective laser sintering manufacturing simulation is presented here. A time-dependent thermo-mechanical model is used with the open-source FEA software CalculiX. Effective homogenized material properties for Inconel 625 are precomputed using NASA’s Micromechanics Analysis Code with the Generalized Method of Cells. The evolving porosity of the material is estimated with each pass of the laser beam during simulation runtime. A comparison with a homogenous model and the evolving model shows that the model with evolving porosity predicts larger distortions with greater residual stresses.

Additive Manufactuirng↗

NASA NTRSDate not supplied

Residual Strength of Hypervelocity Impacted Silica

Windows in the International Space Station are subjected to on-going micrometeoroid and orbital debris damage (MMOD). The reliability of the windows is being ensured by monitoring of damage, life prediction, and measurement of the residual strength of man-made and natural hypervelocity impact damage. The residual strength of man-made craters and MMOD craters harvested from space shuttle windows were used to estimate strength as a function of damage dimensions and thereby derive design allowables for U.S. and Russian fused silicas used in the ISS. US and Russian silica exhibit similar mechanical properties. An effect of impact angle is apparent, with 0o impacts exhibiting the lowest strength for Russian quartz-derived silica. The crater morphology for fused silica consists of a central pit, crush zone, shallow rings and radial cracks dividing petaloids. Morphology of alkaline glass is different from than that of fused silica, with a more distinct pit and pulverized region, and bell and tail-like features below the pit.

Silicia↗

NASA NTRS2020

Residual Motion Estimation for Multi-Squint Airborne SAR

Airborne SAR data are often challenging to analyze due tothe limited accuracy of the platform motion measurements.In interferometric scenarios, even small residual motion er-rors cause undesirable artifacts in the interferometric phaseand geometric registration of image pairs. Various calibrationtechniques have been developed, often exploiting spectral di-versity in some way. The UAVSAR L-band system has imple-mented a new operating mode where multiple images are ac-quired simultaneously at different azimuth squint angles, pro-viding enhanced opportunities for motion calibration. Thispaper describes this imaging mode and the residual motioncalibration technique developed for these special data sets.

Hawkins, Brian↗

NASA NTRS2024

Residual Strength of Hypervelocity Impacted Silica

Windows in the International Space Station (ISS) are subject to ongoing micrometeoroid and orbital debris (MMOD) damage. The reliability of the windows is ensured by monitoring of damage, life prediction, and measurement of the residual strength of man-made and natural hypervelocity impacted window materials. Information on the residual strength of man-made craters and MMOD craters harvested from space shuttle windows was used to estimate strength as a function of damage dimensions and thereby derive design allowables for U.S. and Russian fused silicas used in the ISS. An effect of impact angle is apparent, with 0° impacts exhibiting the lowest strength for Russian quartz-derived silica. The crater morphology for fused silica consists of a central pit, crush zone, shallow rings, and radial cracks dividing shallow, petal-like lateral cracks (petaloids). The morphology of alkaline glass differs from that of fused silica, with a more distinct pit and pulverized region, and bell-shaped and tail-like features below the pit.

International space station,↗

NASA NTRS1965