Search NASA⌕ Search

SEARCH · Search NASA

Results for “STREAM FUNCTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Activation of Dodecanethiol-Capped Gold Catalysts for CO Oxidation by Treatment with KMnO(4) or K(2)MnO(4)

Dodecanethiol-protected gold nanoparticles were deposited onto fumed SiO{sub 2} (Cab-O-Sil) via colloidal deposition. The catalyst was treated with a strongly oxidative KMnO{sub 4} or K{sub 2}MnO{sub 4} solution. Low-temperature conversion in catalytic CO oxidation increased dramatically following the oxidative treatment and subsequent thermal activation at 300 C to burn off residual organic species. On the other hand, the treatment with Fenton's reagent did not lead to any positive effect. The influences of the average sizes of pre-synthesized gold particles (1.8, 2.1, 3.9, 9.9 nm) and the choice of different supports (SiO{sub 2}, TiO{sub 2}, C) were investigated, and relevant characterization using TG/DTG, XRD, TEM, EDX, and HAADF was conducted. The catalyst stability as a function of time on stream was also surveyed. This work establishes the beneficial effect of treating dodecanethiol-capped gold catalysts by KMnO{sub 4} or K{sub 2}MnO{sub 4}.

36 MATERIALS SCIENCE↗

Method for removing impurities from an impurity-containing fluid stream

A method of removing at least one polar component from a fluid stream. The method comprises providing a fluid stream comprising at least one nonpolar component and at least one polar component. The fluid stream is contacted with a supercritical solvent to remove the at least one polar component. The at least one nonpolar component may be a fat or oil and the at least one polar component may be water, dirt, detergents, or mixtures thereof. The supercritical solvent may decrease solubility of the at least one polar component in the fluid stream. The supercritical solvent may function as a solvent or as a gas antisolvent. The supercritical solvent may dissolve the nonpolar components of the fluid stream, such as fats or oils, while the polar components may be substantially insoluble. Alternatively, the supercritical solvent may be used to increase the nonpolarity of the fluid stream.

09 BIOMASS FUELS↗

Wireless Frequency‐Multiplexed Acoustic Array‐Based Acoustofluidics

Abstract Acoustofluidics has shown great potential in enabling on‐chip technologies for driving liquid flows and manipulating particles and cells for engineering, chemical, and biomedical applications. To introduce on‐demand liquid sample processing and micro/nano‐object manipulation functions to wearable and embeddable electronics, wireless acoustofluidic chips are highly desired. This paper presents wireless acoustofluidic chips to generate acoustic waves carrying sufficient energy and achieve key acoustofluidic functions, including arranging particles and cells, generating fluid streaming, and enriching in‐droplet particles. To enable these functions, the wireless acoustofluidic chips leverage mechanisms, including inductive coupling‐based wireless power transfer (WPT), frequency multiplexing‐based control of multiple acoustic waves, and the resultant acoustic radiation and drag forces. For validation, the wirelessly generated acoustic waves are measured using laser vibrometry when different materials (e.g., bone, tissue, and hand) are inserted between the WPT transmitter and receiver. Moreover, the wireless acoustofluidic chips successfully arrange nanoparticles into different patterns, align cells into parallel pearl chains, generate streaming, and enrich in‐droplet microparticles. This research is anticipated to facilitate the development of embeddable wireless on‐chip flow generators, wearable sensors with liquid sample processing functions, and implantable devices with flow generation and acoustic stimulation abilities for engineering, veterinary, and biomedical applications.

Li, Jiali↗

N-stream approximations to radiative transfer

Schuster's two-stream approximation (1905) is first derived from Chandrasekhar's radiative transfer equation (1950), and then extended to an arbitrary number of streams. The resulting technique for solving the transfer function similar to the discrete ordinate and spherical harmonic methods, is useful for modeling atmospheres with complicated phase functions and moderate optical depths. The resulting n coupled linear differential equations are simple and consume less computer time than other approximations, yet have the same required accuracy. The approximation is also flexible with respect to the choice of patch functions, and no approximations are made on the form of the phase function, other than its expansion into Legendre polynomials. A four-stream approximation is evaluated for a Henyey-Greenstein phase function with an asymmetry factor equal to 0.5.

Acquista, C.↗

Effects of unsteady free-stream velocity and free-stream turbulence at a stagnation point

The combined effects of transient free stream velocity and turbulence at a stagnation point on a cylinder situated in a crossflow is investigated analytically, and a model is formulated for the eddy diffusivity induced by free-stream turbulence. The steepest descent method is used to integrate the governing momentum expression, and numerical solutions are given for the unsteady wall shear stress function for specific free-stream transients. It is found after correlation of the results by means of a new turbulence parameter that wall friction increases with increasing free-stream turbulence intensity, and that the friction factor increases with increasing reduced frequency of oscillation values.

Gorla, R. S. R.↗

Metathesis process for preparing an alpha, omega-functionalized olefin

A cross-metathesis process for preparing an .alpha.,.omega.-functionalized olefin, such as methyl 9-decenoate, and an .alpha.-olefin having three or more carbon atoms, such as 1-decene. The process involves contacting in a first reaction zone an .alpha.-functionalized internal olefin, such as methyl oleate, and an .alpha.-olefinic monomer having three or more carbon atoms, such as 1-decene, with a first metathesis catalyst to prepare an effluent stream containing the .alpha.,.omega.-functionalized olefin, such as methyl 9-decenoate, an unfunctionalized internal olefin, such as 9-octadecene, unconverted reactant olefins, and optionally, an .alpha.,.omega.-difunctionalized internal olefinic dimer, such as dimethyl 9-octadecen-1,18-dioate; separating said effluent streams; then contacting in a second reaction zone the unfunctionalized internal olefin with ethylene in the presence of a second metathesis catalyst to obtain a second product effluent containing the .alpha.-olefinic monomer having three or more carbon atoms; and cycling a portion of the .alpha.-olefinic monomer stream(s) to the first zone.

Burdett, Kenneth A↗

Experimental flow coefficients of a full-coverage film-cooled-vane chamber

Ambient- and elevated-temperature flow tests were performed on a four-times-actual-size model of an impingement- and film-cooled segment of a core engine turbine vane. Tests were conducted with the impingement and film cooling plates combined to form a chamber and also with each of the individual separated plates. For the combined tests, the proximity of the film cooling plate affected the flow of coolant through the impingement plate, but not conversely. Impingement flow is presented in terms of a discharge coefficient, and the film cooling flow discharging into still air with no main stream gas flow is presented in terms of a total pressure-loss coefficient. The effects of main stream gas flow on discharge from the film cooling holes are evaluated as a function of coolant to main-stream gas momentum flux ratio. A smoothing technique is developed that identifies and helps reduce flow measurement data scatter.

Meitner, P. L.↗

Universal scaling of the electron distribution function in one-dimensional simulations of relativistic laser-plasma interactions

A formula based on simulations is given for the distribution function of energetic electrons which stream in the forward direction when a relativistically intense laser pulse irradiates a short-scale-length dense plasma at normal incidence. If the energy absorption fraction is known, the entire function can be characterized in terms of the laser intensity I. A number of important characteristics can then be obtained, including the fast-electron energy, current density, and angle of ejection. An objective means for calculating the fast-electron energy is proposed which gives a value of {approx}0.6 of the vacuum oscillatory energy. This reduction in energy is shown to be consistent with the energy required to draw a return current. These results could be used to provide the characteristics of the electron source in theory and simulation of intense laser-solid interactions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Fast two-stream method for computing diurnal-mean actinic flux in vertically inhomogeneous atmospheres

Based on a derivation of the two-stream daytime-mean equations of radiative flux transfer, a method for computing the daytime-mean actinic fluxes in the absorbing and scattering vertically inhomogeneous atmosphere is suggested. The method applies direct daytime integration of the particular solutions of the two-stream approximations or the source functions. It is valid for any duration of period of averaging. The merit of the method is that the multiple scattering computation is carried out only once for the whole averaging period. It can be implemented with a number of widely used two-stream approximations. The method agrees with the results obtained with 200-point multiple scattering calculations. The method was also tested in runs with a 1-km cloud layer with optical depth of 10, as well as with aerosol background. Comparison of the results obtained for a cloud subdivided into 20 layers with those obtained for a one-layer cloud with the same optical parameters showed that direct integration of particular solutions possesses an 'analytical' accuracy. In the case of the source function interpolation, the actinic fluxes calculated above the one-layer and 20-layer clouds agreed within 1%-1.5%, while below the cloud they may differ up to 5% (in the worst case). The ways of enhancing the accuracy (in a 'two-stream sense') and computational efficiency of the method are discussed.

Filyushkin, V. V.↗

Contribution of the backstreaming ions to the self-magnetic pinch (SMP) diode current

The results presented here were obtained with a self-magnetic pinch (SMP) diode mounted at the front high voltage end of the RITS accelerator. RITS is a Self-Magnetically Insulated Transmission Line (MITL) voltage adder that adds the voltage pulse of six 1.3 MV inductively insulated cavities. The RITS driver together with the SMP diode has produced x-ray spots of the order of 1 mm in diameter and doses adequate for the radiographic imaging of high area density objects. Although, through the years, a number of different types of radiographic electron diodes have been utilized with SABER, HERMES III and RITS accelerators, the SMP diode appears to be the most successful and simplest diode for the radiographic investigation of various objects. Our experiments had two objectives: first to measure the contribution of the back-streaming ion currents emitted from the anode target and second to try to evaluate the energy of those ions and hence the Anode-Cathode (A-K) gap actual voltage. In any very high voltage inductive voltage adder utilizing MITLs to transmit the power to the diode load, the precise knowledge of the accelerating voltage applied on the A-K gap is problematic. This is even more difficult in an SMP diode where the A-K gap is very small (~1 cm) and the diode region very hostile. The accelerating voltage quoted in the literature is from estimates based on the measurements of the anode and cathode currents of the MITL far upstream from the diode and utilizing the para-potential flow theories and inductive corrections. Thus, it would be interesting to have another independent measurement to evaluate the A-K voltage. The diode's anode is made of a number of high-Z metals in order to produce copious and energetic flash x-rays. It was established experimentally that the back-streaming ion currents are a strong function of the anode materials and their stage of cleanness. We have measured the back-streaming ion currents emitted from the anode and propagating through a hollow cathode tip for various diode configurations and different techniques of target cleaning treatment: namely, heating at very high temperatures with DC and pulsed current, with RF plasma cleaning, and with both plasma cleaning and heating. In conclusion, we have also evaluated the A-K gap voltage by energy filtering technique. Experimental results in comparison with LSP simulations are presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Conversion of Biomass-Derived Small Oxygenates over HZSM-5 and its Deactivation Mechanism

HZSM-5 catalyst deactivation was studied using aqueous feed mixtures containing ethanol, ethanol+ acetic acid, ethanol+ethyl acetate, or ethanol+acetaldehyde in a fixed bed reactor at 360°C and 300psig. Compared to ethanol alone experiment, addition of other oxygenates reduced catalyst life in the order of: ethyl acetate<acetic acid<acetaldehyde. Based on the liquid product and the spent catalyst analyses from the individual ethanol, acetaldehyde, acetic acid, and ethyl acetate feed, the presence of acetaldehyde appears to produce high molecular weight aromatic compounds which deactivate the catalyst through a pore-blocking mechanism. Acetic acid deactivates the catalyst through an active site poisoning mechanism or strong adsorption of acetate intermediates on the active sites (hydroxyl groups). Ethanol deactivates the catalyst primarily through its pore-blocking mechanism, but the rate of ethanol deactivation is orders of magnitude slower than that of acetaldehyde. Ethyl acetate hydrolyzes to form acetic acid and ethanol which deactivate the catalyst through its respective mechanisms. In addition, each functional group of oxygenates requires different active sites/catalysts and different operating conditions due to competitive adsorptions on active sites for their conversion to the desired products. Therefore, it is necessary to pre-treat the mixture of oxygenates to produce a feed stream containing the same or similar functional group compounds before converting the feed stream to hydrocarbon compounds over HZSM-5 catalyst.

Ramasamy, Karthikeyan K.↗

Dark energy constraints from galaxy cluster peculiar velocities

Future multifrequency microwave background experiments with arcminute resolution and micro-Kelvin temperature sensitivity will be able to detect the kinetic Sunyaev-Zeldovich effect, providing a way to measure radial peculiar velocities of massive galaxy clusters. We show that cluster peculiar velocities have the potential to constrain several dark energy parameters. We compare three velocity statistics (the distribution of radial velocities, the mean pairwise streaming velocity, and the velocity correlation function) and analyze the relative merits of these statistics in constraining dark energy parameters. Of the three statistics, mean pairwise streaming velocity provides constraints that are least sensitive to velocity errors: the constraints on parameters degrade only by a factor of 2 when the random error is increased from 100 to 500 km/s. We also compare cluster velocities with other dark energy probes proposed in the Dark Energy Task Force report. For cluster velocity measurements with realistic priors, the eventual constraints on the dark energy density, the dark energy equation of state and its evolution are comparable to constraints from supernovae measurements, and better than cluster counts and baryon acoustic oscillations; adding velocity to other dark energy probes improves constraints on the figure of merit by more than a factor of 2. For upcoming Sunyaev-Zeldovich galaxy cluster surveys, even velocity measurements with errors as large as 1000 km/s will substantially improve the cosmological constraints compared to using the cluster number density alone.

79 ASTRONOMY AND ASTROPHYSICS↗

Cosmic-ray streaming perpendicular to the mean magnetic field

Starting from a quasi-linear approximation for the ensemble-averaged particle distribution function in a random magnetic field, the complete diffusion tensor is derived. This is done by assuming a simple form for the ensemble-averaged distribution function, explicitly retaining all components of the streaming flux. This derivation obtains the antisymmetric terms in a natural manner. The necessary dropping of higher-order terms gives a criterion for the lower-energy limit of validity of the perpendicular and antisymmetric diffusion coefficients. The limit for the assumed distribution function is about 0.8 GV rigidity in the interplanetary field near 1 AU.

Forman, M. A.↗

Small scale aspects of warm dark matter: Power spectra and acoustic oscillations

We provide a semianalytic derivation of approximate evolution equations for density perturbations of warm dark matter candidates that decoupled while relativistic with arbitrary distribution functions, their solutions at small scales, and a simple numerical implementation that yields their transfer functions and power spectra. Density perturbations evolve through three stages: radiation domination when the particle is relativistic and nonrelativistic and matter domination. An early integrated Sachs-Wolfe effect during the first stage leads to an enhancement of density perturbations and a plateau in the transfer function for k < or approx. k{sub fs}, the free-streaming wave vector. An effective fluid description emerges at small scales which includes the effects of free streaming in initial conditions and inhomogeneities. The transfer function features warm dark matter acoustic oscillations at scales k > or approx. 2k{sub fs}. A simple analytic interpolation of the power spectra between large and small scales and a numerical implementation valid for arbitrary distribution functions is provided. As an application we study the power spectra for two models of sterile neutrinos with m{approx}keV produced nonresonantly and compare our results to those obtained from Boltzmann codes.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Application of turbulence modeling to predict surface heat transfer in stagnation flow region of circular cylinder

A theoretical analysis and numerical calculations for the turbulent flow field and for the effect of free-stream turbulence on the surface heat transfer rate of a stagnation flow are presented. The emphasis is on the modeling of turbulence and its augmentation of surface heat transfer rate. The flow field considered is the region near the forward stagnation point of a circular cylinder in a uniform turbulent mean flow. The free stream is steady and incompressible with a Reynolds number of the order of 10 to the 5th power and turbulence intensity of less than 5 percent. For this analysis, the flow field is divided into three regions: (1) a uniform free-stream region where the turbulence is homogeneous and isotropic; (2) an external viscid flow region where the turbulence is distorted by the variation of the mean flow velocity; and, (3) an anisotropic turbulent boundary layer region over the cylinder surface. The turbulence modeling techniques used are the kappa-epsilon two-equation model in the external flow region and the time-averaged turbulence transport equation in the boundary layer region. The turbulence double correlations, the mean velocity, and the mean temperature within the boundary layer are solved numerically from the transport equations. The surface heat transfer rate is calculated as functions of the free-stream turbulence longitudinal microlength scale, the turbulence intensity, and the Reynolds number.

Wang, Chi R.↗

Regenerable hydrogen chloride removal sorbent and regenerable multi-functional hydrogen sulfide and hydrogen chloride removal sorbent for high temperature gas streams

A novel regenerable composition for removing hydrogen chloride and hydrogen sulfide from a gas stream, the sorbent comprising a mixture containing from about 5 wt % manganese oxide to about 99 wt. % manganese oxides where manganese can exist in various oxidation states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Charging of a dust particle in a plasma with a non extensive electron distribution function

We present a theoretical model for the electrostatic charging of a spherical dust particle in an electron-ion plasma with streaming ions and a nonextensive electron distribution function following a non-Maxwell-Boltzmann law. The non-extensive electron distribution function drastically affects the electron current to dust grain surface and, therefore, the electron charge on a dust particle is significantly reduced in a non-Maxwellian dusty plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

EJFAT: Towards Intelligent Compute Destination Load Balancing

To handle increased data flow, Jefferson Lab (JLab) is partnering with ESnet for development of an AI/ML directed compute work Load Balancer (LB) of UDP streamed data. The LB is FPGA based featuring dynamically configurable, low latency and high throughput destination address switching. The LB provides integration of edge and core computing to support JLab experimental programs, the Electron-Ion Collider, as well as data centers of the future. In the ESnet/JLab FPGA Accelerated Transport (EJFAT) initiative, the function of the LB Data Plane (DP) is to redirect data streams to selectable (but unknown to sender) destination hosts based on current worload and within that host to destination ports as a function of sub- stream id. This effects hierarchical scaling, first across compute machines for processing over a series of events and second, across ports so different data source sub-streams may be assigned to different processors for further parallelization. The LB Control Plane (CP) programs the DP using compute farm telemetry to direct and balance workloads across a compute cluster as the operating conditions require. While Proportional/Integrative/Derivative (PID) controllers are often seen in similar applications, here we investigate the feasibility of a Reinforcement Learning (RL) based schedule manager running in the CP to provide dynamic updates to the DP scheduling policy.

Lawrence, David↗