Search NASA⌕ Search

SEARCH · Search NASA

Results for “Sensing error”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS2012

Wavefront Compensation Segmented Mirror Sensing and Control

The primary mirror of very large submillimeter-wave telescopes will necessarily be segmented into many separate mirror panels. These panels must be continuously co-phased to keep the telescope wavefront error less than a small fraction of a wavelength, to ten microns RMS (root mean square) or less. This performance must be maintained continuously across the full aperture of the telescope, in all pointing conditions, and in a variable thermal environment. A wavefront compensation segmented mirror sensing and control system, consisting of optical edge sensors, Wavefront Compensation Estimator/Controller Soft ware, and segment position actuators is proposed. Optical edge sensors are placed two per each segment-to-segment edge to continuously measure changes in segment state. Segment position actuators (three per segment) are used to move the panels. A computer control system uses the edge sensor measurements to estimate the state of all of the segments and to predict the wavefront error; segment actuator commands are computed that minimize the wavefront error. Translational or rotational motions of one segment relative to the other cause lateral displacement of the light beam, which is measured by the imaging sensor. For high accuracy, the collimator uses a shaped mask, such as one or more slits, so that the light beam forms a pattern on the sensor that permits sensing accuracy of better than 0.1 micron in two axes: in the z or local surface normal direction, and in the y direction parallel to the mirror surface and perpendicular to the beam direction. Using a co-aligned pair of sensors, with the location of the detector and collimated light source interchanged, four degrees of freedom can be sensed: transverse x and y displacements, as well as two bending angles (pitch and yaw). In this approach, each optical edge sensor head has a collimator and an imager, placing one sensor head on each side of a segment gap, with two parallel light beams crossing the gap. Two sets of optical edge sensors are used per segment-to-segment edge, separated by a finite distance along the segment edge, for four optical heads, each with an imager and a collimator. By orienting the beam direction of one edge sensor pair to be +45 away from the segment edge direction, and the other sensor pair to be oriented -45 away from the segment edge direction, all six degrees of freedom of relative motion between the segments can be measured with some redundancy. The software resides in a computer that receives each of the optical edge sensor signals, as well as telescope pointing commands. It feeds back the edge sensor signals to keep the primary mirror figure within specification. It uses a feed-forward control to compensate for global effects such as decollimation of the primary and secondary mirrors due to gravity sag as the telescope pointing changes to track science objects. Three segment position actuators will be provided per segment to enable controlled motions in the piston, tip, and tilt degrees of freedom. These actuators are driven by the software, providing the optical changes needed to keep the telescope phased.

Redding, David C.↗
DOE OSTI2024

Approximation of ice phenology of Maine lakes using Aqua MODIS surface temperature data

Studies of lake ice phenology have historically relied on limited in situ data. Relatively few observations exist for ice out and fewer still for ice in, both of which are necessary to determine the temporal extent of ice cover. Satellite data provide an opportunity to better document patterns of ice phenology across landscapes and relate them to the climatological drivers behind changing ice phenology. We developed a model, the Cumulative Sum Method (CSM), that uses daytime and nighttime surface temperature observations from the Moderate Resolution Imaging Spectroradiometer (MODIS) sensor on board the Earth-observing Aqua satellite to approximate ice in (the onset of ice cover) and ice out from training datasets of 13 and 58 Maine lakes, respectively, during the 2002/2003 through 2017/2018 ice seasons. Ice in was signaled by reaching a threshold of cumulative negative degrees following the first day of the season below 0°C. Ice out was signaled by reaching a threshold of cumulative positive degrees following the first day of the year above 0°C. The comparison of observed and remotely sensed ice-in dates showed relative agreement with a correlation coefficient of 0.71 and a mean absolute error (MAE) of 9.8 days. Ice-out approximations had a correlation coefficient of 0.67 and an MAE of 8.8 days. Lakes smaller in surface area and nearer the Atlantic coast had the greatest error in approximation. Application of the CSM to 20 additional lakes in Maine produced a comparable ice-out MAE of 8.9 days. Ice-out model performance was weaker for the warmest years; there was a larger MAE of 12.0 days when the model was applied to the years 2019–2023 for the original 58 lakes. The development of this model, which utilizes daily satellite data, demonstrates the promise of remote sensing for quantifying ice phenology over short, temporal scales, and wider geographic regions than can be observed in situ, and allows exploration of the influence of surface temperature patterns on the process and timing of ice in and ice out.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2012

Aircraft system modeling error and control error

A method for modeling error-driven adaptive control of an aircraft. Normal aircraft plant dynamics is modeled, using an original plant description in which a controller responds to a tracking error e(k) to drive the component to a normal reference value according to an asymptote curve. Where the system senses that (1) at least one aircraft plant component is experiencing an excursion and (2) the return of this component value toward its reference value is not proceeding according to the expected controller characteristics, neural network (NN) modeling of aircraft plant operation may be changed. However, if (1) is satisfied but the error component is returning toward its reference value according to expected controller characteristics, the NN will continue to model operation of the aircraft plant according to an original description.

Kulkarni, Nilesh V.↗
NASA NTRS1982

A quantitative assessment of resampling errors

Applications associated with digital geographic imagery are subject to great diversity in required cell size, cartographic projection, etc. The need for resampling remote sensing scaner data is evident in all but the most undemanding cases. It is shown that proper resampling of such data is dependent in important ways on the detailed knowledge of the original scanner's effective point-spread function and to the desired point-spread function of resampled data. When both of these are known, it is relatively straightforward to compute the resampling coefficients which do the best job of approximating the shape and position of the synthesized point-spread function. The resulting synthesized psf are compared with an ideal psf located at various interpixel positions and any differences observed as errors.

Dye, R. H.↗
NASA NTRS1982

The measurement of the synoptic scale wind over the ocean

Mesoscale and microscale features of the turbulent winds over the ocean are related to the synoptic scale winds in terms of published spectral forms for the microscale, a mesoscale valley and published values of U*, VAR u', VAR v' and z/L, as defined in the text and as obtained for moderate to gale force winds. The frequencies involved correspond to periods longer than 1 hour and extend to the microscale, which starts at a period near 2 minutes, or so, and continues to the Kolmogorov inertial range. Nondimensional spectra that span both the mesoscale and the microscale are derived as a function of u, f(= n z/u) and z/L, where z is 10 meters, L is the Monin Obukov stability length and u is evaluated at 10 meters. For the same u, different values of z/L produce a range of values of u which in turn result in variations of the eddy structure of the mesoscale and microscale spectra. Both conventional anemometer averages and remotely sensed winds contain a random component of the mesoscale wind in their values. These components are differnces and not errors when winds are compared, and quantitative values for these differences are given. Ways to improve the measurement of the synoptic scale wind by transient ships, data buoys and scatterometers on future spacecraft are described. These ways are loner averaging times for ships and data buoys, depending on the synoptic conditions, and pooling spacecraft to form super observations. Design considerations for future remote sensing systems are given.

Pierson, W. J.↗
NASA NTRS1980

A power law fit to oxygen absorption at 60 GHz and its application to remote sensing of atmospheric temperature

The paper presents an empirical study of the oxygen spectrum near 60 GHz with reference to its applicability to the remote sensing of the tropospheric and lower stratospheric temperature. It is demonstrated that the absorption coefficient of oxygen at 60 GHz can be fitted to the power law form with a relative rms error of about 8%. The power law form, when used in conjunction with the weighting function, permits the definition of some basic quantities in the passive remote sensing of the atmospheric temperature. It is shown how the power law form has been utilized in processing data from the Nimbus 5 microwave spectrometer experiment. The algorithm presented can be applied to spectrometer experiments at infrared frequencies.

Poon, R. K. L.↗
NASA NTRS1959

Review of Aircraft Altitude Errors Due to Static-Pressure Source and Description of Nose-Boom Installations for Aerodynamic Compensation of Error

A brief review of airplane altitude errors due to typical pressure installations at the fuselage nose, the wing tip, and the vertical fins is presented. A static-pressure tube designed to compensate for the position errors of fuselage-nose installations in the subsonic speed range is described. This type of tube has an ogival nose shape with the static-pressure orifices located in the low-pressure region near the tip. The results of wind-tunnel tests of these compensated tubes at two distances ahead of a model of an aircraft showed the position errors to be compensated to within 1/2 percent of the static pressure through a Mach number range up to about 1.0. This accuracy of sensing free-stream static pressure was extended up to a Mach number of about 1.15 by use of an orifice arrangement for producing approximate free-stream pressures at supersonic speeds and induced pressures for compensation of error at subsonic speeds.

Gracey, William↗
DOE OSTI2026

Real-Time Detection of Charge Jumps in Superconducting Qubits with a Convolutional Neural Network

Ionizing radiation from cosmic rays and gammas can induce discontinuous jumps in the environmental charge of superconducting qubits (charge jumps), causing correlated errors that challenge fault-tolerant quantum computing while simultaneously providing a detection signature for quantum sensing applications. Current detection methods operate offline, introducing latency incompatible with in-the-loop qubit control. In this paper, an online detector of charge jumps for superconducting qubits, based on a dilated causal convolutional neural network (DCCNN) designed for in-the-loop deployment on the Quantum Instrumentation Control Kit (QICK) platform, is presented. The network is trained on synthetic Ramsey tomography scans generated from qubit templates measured at the Northwestern Experimental Underground Site (NEXUS) at Fermilab, and translated to FPGA firmware via hls4ml with ap_fixed$\langle 16,6 \rangle$ quantization, reaching a per-inference latency of $6.19 μ$s on the Zynq UltraScale+ RFSoC ZCU216. At this operating point the DCCNN matches the detection efficiency of the established offline $χ^2$ algorithm ($0.843 \pm 0.022$ vs. $0.866 \pm 0.020$ on $|Δq| \in [0.1, 0.5] e$ at matched false-positive rate), while requiring no per-qubit hyperparameter tuning. This shifts charge-jump detection from a post-hoc diagnostic to a control-loop primitive, enabling adaptive protocols that respond to radiation-induced events in situ, with applications to quantum-computing error mitigation and to the use of superconducting qubits as particle detectors.

Gaytan-Villarreal, Daniel [Carnegie Mellon U.]↗
NASA NTRS1988

On correcting radial orbit errors for altimetric satellites using crossover analysis

A method is proposed for correcting radial orbit error in measurements of sea surface height using a satellite altimeter. Traditionally, the orbit error is modeled in terms of a Fourier series with the Fourier coefficients determined by minimizing the residual crossover difference in a least-squares sense. In this method an a priori constraint must be imposed to obtain a unique solution. It is shown that by using singular value decomposition, no such constraint is needed. This proposed method leaves the geographically dependent errors unchanged and makes only those corrections warranted by the information contained in crossover differences. Thus, the resultant ocean topography is free from any undue distortion which might be incurred by an a priori constraint. It is suggested that the method is useful for application to high-accuracy altimetric mission, because the orbit error can be reduced without compromising the accuracy of the measured mean ocean topography.

Fu, Lee-Lueng↗
NASA NTRS1975

Cost reductions through earth resource satellites in developed countries

Data from detailed studies on the possible economic impact of the use of remote sensing technology in industry and agriculture are presented and analyzed. The utility of satellite surveillance in reduction of crop production forecast error, recognition and monitoring of crop diseases and insect infestations, and range management is evaluated. Application of satellite maps to facilitate land resource decisions, mineral exploration, geological studies, and water resource inventories is considered, as is the usefulness of early storm warning in the reduction of property damage. The cost of remote sensing is compared to that of conventional methods whenever possible.

Schweickart, R. L.↗
DOE OSTI2017

Plasma density perturbation caused by probes at low gas pressure

An analysis of plasma parameter perturbations caused by a spherical probe immersed into a spherical plasma is presented in this paper for arbitrary collisionality and arbitrary ratios of probe to plasma dimensions. The plasma was modeled by the fluid plasma equations with ion inertia and nonlinear ion friction force that dominate plasma transport at low gas pressures. Significant depletion of the plasma density around the probe surface has been found. The area of plasma depletion coincides with the sensing area of different kinds of magnetic and microwave probes and will therefore lead to errors in data inferred from measurements with such probes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1973

Emission and reflection from healthy and stressed natural targets with computer analysis of spectroradiometric and multispectral scanner data

Special emphasis was on corn plants, and the healthy targets were differentiated from stressed ones by remote sensing. Infrared radiometry of plants is reviewed thoroughly with emphasis on agricultural crops. Theory and error analysis of the determination of emittance of a natural target by radiometer is discussed. Experiments were conducted on corn (Zea mays L.) plants with long wavelength spectroradiometer under field conditions. Analysis of multispectral scanner data of ten selected flightlines of Corn Blight Watch Experiment of 1972 indicated: (1) There was no regular pattern of the mean response of the higher level/levels blighted corn vs. lower level/levels blighted corn in any of the spectral channels. (2) The greater the difference between the blight levels, the more statistically separable they usually were in subsets of one, two, three and four spectral channels.

Kumar, R.↗
NASA NTRS1974

Design of FIR digital filters for pulse shaping and channel equalization using time-domain optimization

Three algorithms are developed for designing finite impulse response digital filters to be used for pulse shaping and channel equalization. The first is the Minimax algorithm which uses linear programming to design a frequency-sampling filter with a pulse shape that approximates the specification in a minimax sense. Design examples are included which accurately approximate a specified impulse response with a maximum error of 0.03 using only six resonators. The second algorithm is an extension of the Minimax algorithm to design preset equalizers for channels with known impulse responses. Both transversal and frequency-sampling equalizer structures are designed to produce a minimax approximation of a specified channel output waveform. Examples of these designs are compared as to the accuracy of the approximation, the resultant intersymbol interference (ISI), and the required transmitted energy. While the transversal designs are slightly more accurate, the frequency-sampling designs using six resonators have smaller ISI and energy values.

Houts, R. C.↗
NASA NTRS1977

Electric vehicle power train instrumentation: Some constraints and considerations

The application of pulse modulation control (choppers) to dc motors creates unique instrumentation problems. In particular, the high harmonic components contained in the current waveforms require frequency response accommodations not normally considered in dc instrumentation. In addition to current sensing, accurate power measurement requires not only adequate frequency response but must also address phase errors caused by the finite bandwidths and component characteristics involved. The implications of these problems are assessed.

Triner, J. E.↗
NASA NTRS1977

Electric vehicle power train instrumentation - Some constraints and considerations

The application of pulse modulation control (choppers) to dc motors creates unique instrumentation problems. In particular, the high-harmonic components contained in the current waveforms require frequency-response accommodations not normally considered in dc instrumentation. In addition to current sensing, accurate power measurement not only requires adequate frequency response but also must address phase errors caused by the finite bandwidths and component characteristics involved. This paper discusses the implications of these problems and reports on the degree to which they have been solved at Lewis Research Center.

Triner, J. E.↗
NASA NTRS1980

Simulation studies of a model of high-density metallic hydrogen

Upper bounds for the ground-state energies of liquid and solid phases of metallic hydrogen and metallic deuterium have been calculated with variational methods and Monte Carlo techniques. At four densities (0.8, 1.2, 1.36, and 1.488) crystalline phases are clearly preferred in the sense that the energy difference, when compared to the liquid, is in excess of the errors inherent in the numerical procedures. At a fifth density (1.6), the energy differences between solid and liquid phases are smaller than these errors.

Mon, K. K.↗
NASA NTRS1985

Systematic and random variations in digital Thematic Mapper data

Radiance recorded by any remote sensing instrument will contain noise which will consist of both systematic and random variations. Systematic variations may be due to sun-target-sensor geometry, atmospheric conditions, and the interaction of the spectral characteristics of the sensor with those of upwelling radiance. Random variations in the data may be caused by variations in the nature and in the heterogeneity of the ground cover, by variations in atmospheric transmission, and by the interaction of these variations with the sensing device. It is important to be aware of the extent of random and systematic errors in recorded radiance data across ostensibly uniform ground areas in order to assess the impact on quantative image analysis procedures for both the single date and the multidate cases. It is the intention here to examine the systematic and the random variations in digital radiance data recorded in each band by the thematic mapper over crop areas which are ostensibly uniform and which are free from visible cloud.

Duggin, M. J.↗
NASA NTRS1989

Operator induced multigrid algorithms using semirefinement

A variant of multigrid, based on zebra relaxation, and a new family of restriction/prolongation operators is described. Using zebra relaxation in combination with an operator-induced prolongation leads to fast convergence, since the coarse grid can correct all error components. The resulting algorithms are not only fast, but are also robust, in the sense that the convergence rate is insensitive to the mesh aspect ratio. This is true even though line relaxation is performed in only one direction. Multigrid becomes a direct method if an operator-induced prolongation is used, together with the induced coarse grid operators. Unfortunately, this approach leads to stencils which double in size on each coarser grid. The use of an implicit three point restriction can be used to factor these large stencils, in order to retain the usual five or nine point stencils, while still achieving fast convergence. This algorithm achieves a V-cycle convergence rate of 0.03 on Poisson's equation, using 1.5 zebra sweeps per level, while the convergence rate improves to 0.003 if optimal nine point stencils are used. Numerical results for two and three dimensional model problems are presented, together with a two level analysis explaining these results.

Decker, Naomi↗