Search NASA⌕ Search

SEARCH · Search NASA

Results for “Simulated Probes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

An Experimental Investigation of an Arcjet Thruster Exhaust Using Langmuir Probes

Electrostatic (Langmuir) probes of both spherical and cylindrical geometry have been used to obtain electron number density and temperature in the exhaust of a laboratory arcjet. The arcjet thruster operated on nitrogen and hydrogen mixtures to simulate fully decomposed hydrazine in a vacuum environment with background pressures less than 5 x 10 to the -2 Pa. The exhaust appears to be only slightly ionized (less than 1 percent) with local plasma potentials near facility ground. The current-voltage characteristics of the probes indicate a Maxwellian temperature distribution. Plume data are presented as a function of arcjet operating condition and also position in the exhaust.

Carney, Lynnette M.↗
NASA NTRS1991

Use of rotating pinholes and reticles for calibration of cloud droplet instrumentation

Calibration devices for the Forward Scattering Spectrometer Probe (FSSP) and the Optical Array Probe (OAP) were developed. The device used with the FSSP is a rotating pinhole calibrator. It utilizes light diffracted by a pinhole of a known diameter to simulate scattered light from a water droplet. This device can be used to calibrate the FSSP, measure the FSSP's optical collection angles and for instrument alignment and troubleshooting. The device used with the OAP is a rotating reticle calibrator. Chrome disks of a known diameter on the reticle are used for calibration of the OAP and for determining the OAP's response to out-of-focus particles in the probe volume.

Hovenac, Edward A.↗
NASA NTRSDate not supplied

Entry, Descent, and Landing Simulation for DAVINCI

The Deep Atmosphere Venus Investigation of Noble gases, Chemistry, and Imaging(DAVINCI) mission is currently scheduled to launch in June 2029 to explore Venus via two flybys and a probe descent scheduled for June 2031. The goals of this mission is to study the origin, evolution, and current state of Venus, especially the deep Venusian atmosphere using an atmospheric probe named Zephyr. The Zephyr will take key measurements in the deep atmosphere of Venus and be the first probe to take high-resolution aerial photographs of a mountainous tesserae surface as it descends over the Alpha Regio highlands region, which has the oldest surfaces of Venus. The Zephyr’s descent trajectory, which determines the flight over the Alpha Regio, is crucial to meet the science objectives of the DAVINCI mission. To ensure the success of the DAVINCI mission, the Entry, Descent, and Landing (EDL) modeling has undergone several developments to track its trajectory, its uncertainties, and calculate metrics on the science data that can be transmitted. This paper will cover these developments and the current status of the EDL modeling.

davinci↗
NASA NTRS1991

Space engineering

Human productivity was studied for extravehicular tasks performed in microgravity, particularly including in-space assembly of truss structures and other large objects. Human factors research probed the anthropometric constraints imposed on microgravity task performance and the associated workstation design requirements. Anthropometric experiments included reach envelope tests conducted using the 3-D Acoustic Positioning System (3DAPS), which permitted measuring the range of reach possible for persons using foot restraints in neutral buoyancy, both with and without space suits. Much neutral buoyancy research was conducted using the support of water to simulate the weightlessness environment of space. It became clear over time that the anticipated EVA requirement associated with the Space Station and with in-space construction of interplanetary probes would heavily burden astronauts, and remotely operated robots (teleoperators) were increasingly considered to absorb the workload. Experience in human EVA productivity led naturally to teleoperation research into the remote performance of tasks through human controlled robots.

Alexander, Harold L.↗
NASA NTRS1999

Langley 8-Ft. HTT Test 139 Gas Analyses

This report presents results of gas analyses of Mach 7 Tunnel Calibration Test 139 conducted in the Langley 8-Ft. HTT from May through June of 1998. These tests in support of hypersonic airbreathing propulsion provided a current calibration at the primary test condition for the National Aero-Space Plane Concept Demonstration Engine and a new calibration for the two test conditions that will be used for engine testing in support of the Hyper-X program. Samples taken from three probes on the Flow Survey Apparatus were analyzed using mass spectrometers. Although this wind tunnel doesn't produce a true simulation of flight conditions, test results show that a uniform oxygen concentration of 21 percent was achieved.

Sprinkle, Danny R.↗
NASA NTRS1998

Carbon Nanotube Based Nano-Electro-Mechanical Systems (NEMS)

Carbon nanotubes (CNT) enable nanoelectromechanical systems (NEMS) because of their inherent nanostructure, intrinsic electric conductivity and mechanical resilience. The collaborative work between Stanford (experiment) and NASA Ames (theory and simulation) has made progress in two types of CNT based NEMS for nanoelectronics and sensor applications. The CNT tipped scanning probe microscopy (SPM) is a NEMS in which CNT tips are used for nanoscale probing, imaging and manipulating. It showed great improvement in probing surfaces and biological systems over conventional tips. We have recently applied it to write (lithography) and read (image) uniform SiO2 lines on large Si surface area at speed up to 0.5 mm per s. Preliminary work using approximately 10 nm multiwall nanotube tips produced approximately 10 nm structures and showed that the CNT tips didn't wear down when crashed as conventional tips often do. This presents a solution to the long standing tip-wear problem in SPM nanolithography. We have also explored potential of CNT tips in imaging DNA in water. Preliminary experiment using 10 nm CNT tips reached 5 nm resolution. The 1 nm nanolithography and 1 nm DNA imaging can be expected by using approximately 1 nm CNT tips. In contrast to CNT tipped SPM, we also fabricated CNT devices on silicon wafer in which CNTs connect patterned metallic lines on SiO2/Si by a simple chemical vapor deposition process. Using conventional lithography for silicon wafer, we have been able to obtain CNT based transistors and sensors. Investigations of the CNT NEMS as physical, biological and chemical sensors are in progress and will be discussed.

Han, Jie↗
NASA NTRS1992

Analysis of TIMS performance subjected to simulated wind blast

The results of the performance of the Thermal Infrared Multispectral Scanner (TIMS) when it is subjected to various wind conditions in the laboratory are described. Various wind conditions were simulated using a 24 inch fan or combinations of air jet streams blowing toward either or both of the blackbody surfaces. The fan was used to simulate a large volume of air flow at moderate speeds (up to 30 mph). The small diameter air jets were used to probe TIMS system response in reaction to localized wind perturbations. The maximum nozzle speed of the air jet was 60 mph. A range of wind directions and speeds were set up in the laboratory during the test. The majority of the wind tests were conducted under ambient conditions with the room temperature fluctuating no more than 2 C. The temperature of the high speed air jet was determined to be within 1 C of the room temperature. TIMS response was recorded on analog tape. Additional thermistor readouts of the blackbody temperatures and thermocouple readout of the ambient temperature were recorded manually to be compared with the housekeeping data recorded on the tape. Additional tests were conducted under conditions of elevated and cooled room temperatures. The room temperature was varied between 19.5 to 25.5 C in these tests. The calibration parameters needed for quantitative analysis of TIMS data were first plotted on a scanline-by-scanline basis. These parameters are the low and high blackbody temperature readings as recorded by the TIMS and their corresponding digitized count values. Using these values, the system transfer equations were calculated. This equation allows us to compute the flux for any video count by computing the slope and intercept of the straight line that relates the flux to the digital count. The actual video of the target (the lab floor in this case) was then compared with a simulated target. This simulated target was assumed to be a blackbody at emissivity of .95 degrees and the temperature was assumed to be at ambient temperature as recorded by the TIMS for each scanline. Using the slope and the intercept the flux corresponding to this target was converted into digital counts. The counts were observed to have a strong correlation with the actual video as recorded by the TIMS. The attached graphs describe the performance of the TIMS when compressed air is blown at each one of the blackbodies at different speeds. The effect of blowing a fan and changing the room temperature is also being analyzed. Results indicate that the TIMS system responds to variation in wind speed in real time and maintains the capability to produce accurate temperatures on a scan line basis.

Jaggi, S.↗
NASA NTRS2020

NASA ETR Quiet Zone Probe Study

The NASA Langley Research Center’s Experimental Test Range is an indoor anechoic compact range far field test facility used to conduct antenna and electromagnetic radiation measurements. The Experimental Test Range was designed to simulate far field illumination in the facility test volume over a broad band of frequencies by collimating the RF energy from the 26 ft by 26 ft parabolic reflector. The quality of the antenna and radiation measurements are dependent on the uniformity of the far field plane wave generated by the compact range reflector. While this facility is going through several upgrades, this report describes an assessment of the far field plane wave conducted after resurfacing the primary reflector to improve performance and extend the range of frequencies for which this facility can operate. This assessment addresses far field uniformity probe data measured in the test volume across the facility operational frequency bands.

Ticatch, Larry A.↗
NASA NTRS2008

Three-Dimensional Signatures of Intermittent Magnetic Reconnection in Global Simulations of Dayside Magnetosphere Dynamics

We performed high resolution global MHD simulations of THEMIS dayside crossings events in May -June 2007. We found that magnetopause surface is not in steady-state even during extended periods of steady solar wind conditions. The so-called tilted reconnection lines become unstable due to formation of pressure bubbles, strong core field flux tubes, vortices, and traveling magnetic field cavities. The topology of FTEs differ from that in two dimension cartoons representing obliquely oriented quasi-2D flux rope. The structure of FTE is changing at spatial scales of 1 -2 Re. Closely located space probes can observe completely different signatures. Branches of bent flux rope can move in opposite directions. THEMIS and Cluster observations are consistent with signatures predicted by simulations.

Kuznetsova, M.M.↗
NASA NTRS1992

Theoretical simulation of a 2 micron airborne solid state laser anemometer

In the near future, military aircraft will need to know precisely their true airspeed in order to optimize flight conditions. In comparison with classical anemometer probes, an airborne Doppler lidar allows measurement of the air velocity without influence from aircraft aerodynamic disturbance. While several demonstration systems of heterodyne detection using a CO2 laser have been reported, improvements in the technology of solid state lasers have recently opened up the possibility that these devices can be used as an alternative to CO2 laser systems. In particular, a diode pumped Tm:Ho:YAG laser allows a reliable compact airborne system with an eye safe wavelength (lambda = 2.09 microns) to be achieved. The theoretical study of performances of a coherent lidar using a solid state diode pumped Tm:Ho:YAG laser, caled SALSA, for measuring aircraft airspeed relative to atmospheric aerosols is described. A computer simulation was developed in order to modelize the Doppler anemometer in the function of atmospheric propagation and optical design. A clever analysis of the power budget on the detector area allows optical characteristic parameters of the system to be calculated, and then it can be used to predict performances of the Doppler system. Estimating signal to noise ratios (SNR) and heterodyne efficiency provides the available energy of speed measurement as well as a useful measurement of the alignment of the backscattered and reference fields on the detector.

Imbert, Beatrice↗
NASA NTRS2022

Probing the High-energy Gamma-Ray Emission Mechanism in the Vela Pulsar via Phase-resolved Spectral and Energy-dependent Light-curve Modeling

Recent kinetic simulations sparked a debate regarding the emission mechanism responsible for pulsed GeV γ-ray emission from pulsars. Some models invoke curvature radiation, while other models assume synchrotron radiation in the current sheet. We interpret the curved spectrum of the Vela pulsar as seen by H.E.S.S. II (up to ∼100 GeV) and the Fermi Large Area Telescope to be the result of curvature radiation due to primary particles in the pulsar magnetosphere and current sheet. We present phase-resolved spectra and energy-dependent light curves using an extended slot gap and current-sheet model, invoking a step function for the accelerating electric field as motivated by kinetic simulations. We include a refined calculation of the curvature radius of particle trajectories in the lab frame, impacting the particle transport, predicted light curves, and spectra. Our model reproduces the decrease of the flux of the first peak relative to the second one, evolution of the bridge emission, near-constant phase positions of peaks, and narrowing of pulses with increasing energy. We can explain the first of these trends because we find that the curvature radii of the particle trajectories in regions where the second γ-ray light-curve peak originates are systematically larger than those associated with the first peak, implying that the spectral cutoff of the second peak is correspondingly larger. However, an unknown azimuthal dependence of the E field, as well as uncertainty in the precise spatial origin of the GeV emission, precludes a simplistic discrimination of emission mechanisms.

Monica Barnard↗
NASA NTRSDate not supplied

Absorption Laser Differential Interferometry for Simultaneous Colinear Flow Property and Fluctuation Measurements

An absorption laser differential interferometer (A-LDI) was constructed and tested in an effort to simultaneously and colinearly measure flow properties (pressure, temperature, concentration) and flow fluctuations (changes in optical path length). Whereas typical LDI and focused LDI (FLDI) systems use fixed wavelength lasers as the light source (often either green at approximately 532 nm or red at approximately 630 nm), a tunable 760 nm diode laser was used to probe the A-band absorption spectrum of molecular oxygen. The A-LDI system was used to measure O2 absorption and flow fluctuations in a sub-atmospheric pressure-controlled test cell, with absorption profiles from direct absorption and wavelength modulation absorption matching simulated results, while simultaneously being sensitive to high frequency fluctuations from jets of either compressed air or 100% O2 from a gas bottle. The A-LDI system was also installed at the NASA Langley Research Center Probe Calibration Tunnel to assess the freestream flow state in a Mach 3.5 flow. LDI measurements of the freestream indicated increasing amplitudes of flow fluctuations with increasing stagnation pressure at a fixed stagnation temperature, while absorption results demonstrated sensitivity to freestream pressure changes.

Joshua M. Weisberger↗
NASA NTRS1989

Computation of rarefied hypersonic flows

Numerical techniques for the simulation of hypersonic flows of rarefied gases are examined in an analytical review. The direct-simulation Monte Carlo (DSMC) method developed to interpret measurement data obtained by the Space Shuttle in the SUMS project is described; the fundamental limitations of the DMSC approach are discussed; and modifications to improve the physical plausibility of DSMC predictions are proposed. Particular attention is given to the use of a double-peaked molecular distribution function for the internal flow in the SUMS probe, a downstream vacuum-reservoir condition as a simplifying assumption, and an explicit forward-time centered-space differencing scheme for the discretization of the SUMS problem. Typical simulation results are presented in extensive graphs and briefly characterized.

Cheng, Sin-I↗
NASA NTRS1999

Detecting the Attenuation of Blazar Gamma-ray Emission by Extragalactic Background Light with GLAST

Gamma rays with energy above 10 GeV interact with optical-UV photons resulting in pair production. Therefore, a large sample of high redshift sources of these gamma rays can be used to probe the extragalactic background starlight (EBL) by examining the redshift dependence of the attenuation of the flux above 10 GeV. GLAST, the next generation high-energy gamma-ray telescope, will for the first time have the unique capability to detect thousands of gamma-ray blazars up to redshifts of at least z = 4, with enough angular resolution to allow identification of a large fraction of their optical counterparts. By combining recent determinations of the gamma-ray blazar luminosity function, recent calculations of the high energy gamma-ray opacity due to EBL absorption, and the expected GLAST instrument performance to produce simulated samples of blazars that GLAST would detect, including their redshifts and fluxes, we demonstrate that these blazars have the potential to be a highly effective probe of the EBL.

Chen, Andrew↗
NASA NTRS1988

Probe-evoked event-related potential techniques for evaluating aspects of attention and information processing

The study of probe event related potentials (probe ERPs) is reviewed. Several recent experiments are described which seem to leave in doubt the usefulness of applying ERP to simulation and field conditions as well as laboratory situations. Relatively minor changes in the experimental paradigm can produce major shifts in ERP findings, for reasons that are not clear. However, task-elicited ERPs might be used on a flight simulator if the experimenter takes time of arrival of the eyes on a particular instrument as one variable of concern and dwell time on the instrument as a second variable. One can then look at ERPs triggered by saccade termination for fixation pauses of specified durations. It may well be that ERP to a momentarily important display will differ from that elicited by routine instrument check.

Stern, John A.↗
NASA NTRS1988

Experimental program for real gas flow code validation at NASA Ames Research Center

The experimental program for validating real gas hypersonic flow codes at NASA Ames is described. Ground based test facilities used include ballistic ranges, shock tubes and shock tunnels, arcjet facilities and heated air hypersonic wind tunnels. Also included are large scale computer systems for kinetic theory simulations and benchmark code solutions. Flight tests consist of the Aeroassist Flight Experiment, the Space Shuttle, Project Fire 2, and planetary probes such as Galileo, Pioneer Venus and PAET.

Deiwert, George S.↗