AN EXPERIMENTAL STUDY OF THE ALUMINUM ADDITIVE ROLE IN UNSTABLE COMBUSTION OF SOLID ROCKET PROPELLANTS
Aluminum additive in unstable combustion of solid rocket propellants - growth, evaporation and burning rates in flame zone
PROPELLANT ADDITIVE↗
SEARCH · Search NASA
Results for “Solid propellant”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A CRITICAL REVIEW OF RECENT RESEARCH ON THE MECHANISM OF IGNITION OF SOLID ROCKET PROPELLANTS
Research on mechanism of ignition of solid rocket propellants
COMBUSTION↗
Propeller Tests to Determine the Effect of Number of Blades at Two Typical Solidities
Propellers with equal total blade area, but with different numbers, were tested at Stanford University. The tests show generally that, for equal total blade area, propellers with the larger number of blades absorb the greater power and, provided hubs have equal drag, develop the higher efficiency. It is shown that the differences found are in agreement, qualitatively, with what might be predicted from simple blade-element theory.
Lesley, E P↗
JANNAF 28th Propellant Development and Characterization Subcommittee and 17th Safety and Environmental Protection Subcommittee Joint Meeting
This volume contains 37 unclassified/unlimited-distribution technical papers that were presented at the JANNAF 28th Propellant Development & Characterization Subcommittee (PDCS) and 17th Safety & Environmental Protection Subcommittee (S&EPS) Joint Meeting, held 26-30 April 1999 at the Town & Country Hotel and the Naval Submarine Base, San Diego, California. Volume II contains 29 unclassified/limited-distribution papers that were presented at the 28th PDCS and 17th S&EPS Joint Meeting. Volume III contains a classified paper that was presented at the 28th PDCS Meeting on 27 April 1999. Topics covered in PDCS sessions include: solid propellant rheology; solid propellant surveillance and aging; propellant process engineering; new solid propellant ingredients and formulation development; reduced toxicity liquid propellants; characterization of hypergolic propellants; and solid propellant chemical analysis methods. Topics covered in S&EPS sessions include: space launch range safety; liquid propellant hazards; vapor detection methods for toxic propellant vapors and other hazardous gases; toxicity of propellants, ingredients, and propellant combustion products; personal protective equipment for toxic liquid propellants; and demilitarization/treatment of energetic material wastes.
Cocchiaro, James E.↗
An experimental investigation of gas evolution from a solid rocket propellant during pressure transients.
Mass flow rate of gas evolution from burning solid rocket propellant during transient depressurization of combustion chamber
TRANSIENT PRESSURE↗
Effect of solidity and inclination on propeller-nacelle force coefficients
A series of wind tunnel experiments were conducted to study the effect of propeller solidity and thrust axis inclination on the propeller normal force coefficient. Experiments were conducted in the Langley 14 by 22 foot Subsonic Tunnel with a sting mounted, counterrotation, scale model propeller and nacelle. Configurations had two rows of blades with combinations of 4 and 8 blades per hub. The solidity was varied by changing the number of blades on both rows. Tests were conducted for blade pitch setting of 31.34 deg, 36.34 deg, and 41.34 deg over a range of angle of attack from -10 deg to 90 deg and range of advance ratio from 0.8 to 1.4. The increase in propeller normal force with angle of attack is greater for propellers with higher solidity.
Gentry, Garl L., Jr.↗
Theoretical prediction of erosive burning characteristics of solid rocket propellant based on burning rate dependence of pressure and initial temperature and its energetic characteristics
New theoretical method for prediction of erosive burning characteristics of solid propellant, using known ballistic and thermodynamic data only, is presented. Method is based on modified Lenoir-Robillard formula, and is applicable for composite and double base propellants, with or without negative erosion effect. Method is confirmed using experimental data of numerous authors.
Jojic, B.↗
Gas evolution from a solid rocket propellant during depressurization to produce a quench.
Mass flow rate of gas evolution from burning solid rocket propellant during transient depressurization of combustion chamber
GAS EVOLUTION↗
A facility for testing the acoustic combustion instability characteristics of solid rocket propellants
A facility is described that has been specifically designed for small-scale laboratory testing of solid rocket propellants. A description of the facility is provided which includes the general plan of the facility and features related to personnel safety. One of the major activities in the facility is testing solid rocket propellants for combustion response to acoustic perturbations. A detailed discussion of acoustic instability testing is given including specially designed combustion apparatus, data acquisition, and signal conditioning. Techniques of data reduction are reviewed and some of the instrumentation problems that arise in this type of testing are mentioned along with practical solutions.
Mathes, H. B.↗
Flame spreading over the surface of igniting solid rocket propellants and propellant ingredients, part 4
Flame spreading over surface of igniting solid rocket propellants at different pressures, and oxygen-nitrogen mixtures
Horowitz, F. A.↗
JANNAF 37th Combustion Subcommittee Meeting
This volume, the first of two volumes is a compilation of 59 unclassified/unlimited-distribution technical papers presented at the Joint Army-Navy-NASA-Air Force (JANNAF) 37th Combustion Subcommittee (CS) meeting held jointly with the 25th Airbreathing Propulsion Subcommittee (APS), 19th Propulsion Systems Hazards Subcommittee (PSHS), and 1st Modeling and Simulation Subcommittee (MSS) meetings. The meeting was held 13-17 November 2000 at the Naval Postgraduate School and Hyatt Regency Hotel, Monterey, California. Topics covered at the CS meeting include: a keynote address on the Future Combat Systems, and review of a new JANNAF Modeling and Simulation Subcommittee, and technical papers on gun propellant burning rate, gun tube erosion, advanced gun propulsion concepts, ETC guns, novel gun propellants; liquid, hybrid and novel propellant combustion; solid propellant combustion kinetics, GAP, ADN and RDX combustion, sandwich combustion, metal combustion, combustion instability, and motor combustion instability.
Fry, Ronald S.↗
Accidental ignition in propellant processing
Sources of ignition during solid propellant processing are discussed in terms of the operations performed and the resultant hazard to facilities and personnel. The most serious ignition hazard in composite solid propellant processing occurs during the mixing operation where the sources for Ignition are greatest and the result of an ignition most catastrophic because of the state of subdivision of flammable material and its confinement.
H M Shuey↗
Effect of acceleration on the burning rate of composite propellants.
Metallized and nonmetallized composite solid propellant burning rates, analyzing effects of acceleration, noting agglomeration and nonnormal conditions
GAS DYNAMICS↗
Space Shuttle SRM Ignition System
This paper presents the Space Shuttle SRM Ignition System, which consists of a large solid propellant main igniter, a small solid propellant initiating igniter and an electromechanical safety and arming device containing two NASA Standard Initiators and a B-KNO3 pyrotechnic booster charge. In development motors, the igniter also has a valve through which CO2 is injected for post-firing quench of the SRM. The igniter has redundant, testable seals at all pressurized joints and three major reusable components; the case, the adapter, and the S&A device. Two development problem areas are discussed. One problem area was transverse mode combustion instability in the main igniter with maximum amplitude of 340 psi peak-to-peak at a frequency of 1500 Hz, which was reduced by a propellant grain configuration change and a change from a 2% aluminum content propellant to a formulation containing 10% aluminum. The other problem area was an excessively rapid rise of thrust in the SRM, which was reduced by reducing the igniter mass flow rate. This mass flow rate reduction was accomplished by removing portions of the grain starpoints in the head end.
Bolieau, C. W.↗
Portable propellant cutting assembly, and method of cutting propellant with assembly
A propellant cutting assembly and method of using the assembly to cut samples of solid propellant in a repeatable and consistent manner is disclosed. The cutting assembly utilizes two parallel extension beams which are shorter than the diameter of a central bore of an annular solid propellant grain and can be loaded into the central bore. The assembly is equipped with retaining heads at its respective ends and an adjustment mechanism to position and wedge the assembly within the central bore. One end of the assembly is equipped with a cutting blade apparatus which can be extended beyond the end of the extension beams to cut into the solid propellant.
Sharp, Roger A.↗
Solid rocket technology advancements for space tug and IUS applications
In order for the shuttle tug or interim upper stage (IUS) to capture all the missions in the current mission model for the tug and the IUS, an auxiliary or kick stage, using a solid propellant rocket motor, is required. Two solid propellant rocket motor technology concepts are described. One concept, called the 'advanced propulsion module' motor, is an 1800-kg, high-mass-fraction motor, which is single-burn and contains Class 2 propellent. The other concept, called the high energy upper stage restartable solid, is a two-burn (stop-restartable on command) motor which at present contains 1400 kg of Class 7 propellant. The details and status of the motor design and component and motor test results to date are presented, along with the schedule for future work.
Ascher, W.↗
The effect of solidity on propeller normal force
Propeller normal force is a major contributor to pitch and yaw stability on propeller driven aircraft. While it is well known that propeller normal force is a function of the number of blades, there are no published data for the high numbers of blades that are used in the new designs such as the UDF. This paper presents the results of a test conducted in the NASA Langley 14- x 22-foot Subsonic Tunnel using a sting-mounted counter-rotation propeller and nacelle. The configurations tested were combinations of 0, 4, and 8 blades per hub. Tests were conducted for blade angle settings of 31.34, 36.34, and 41.34 deg over an angle-of-attack range from -10 to 90 deg and over a range of advance ratios from 0.8 to 1.4. The results show that propeller normal force varies with both solidity and angle of attack.
Dunham, Dana Morris↗
31st JANNAF Combustion Subcommittee Meeting
This volume, the second of four volumes, is a collection of 36 unclassified/unlimited papers which were presented at the 31st Joint Army-Navy-NASA-Air Force (JANNAF) Combustion Subcommittee Meeting in conjunction with the Exhaust Plume Technology Subcommittee and SPIRITS User Group Meeting held 17-21 October 1994 at the Lockheed Missiles and Space Company, Sunnyvale, California. Specific subjects discussed include solid propellant combustion instability and unsteady combustion, rocket motors, guns and marine combustion characteristics, solid propellant formulation and solid and gas phase combustion kinetics.
Gannaway, Mary T.↗