Search NASA⌕ Search

SEARCH · Search NASA

Results for “Sound”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Transparent sound screens

Transparent sound screens consisting of glass (organic glass) plates placed at fixed angles with respect to the floor are considered. Noise levels in the screened area depend on the cumulative effect of direct, reverberated and refracted components of sound energy radiated by the source. This effect is analyzed on the analogy of the summation of electrical impedances. Inasmuch as under given circumstances sufficient noise control can be obtained, transparent screens seem to solve the problem of unimpeded supervision of installations in noisy workshops and power plants; in administrative buildings, computing centers, design bureaus, etc., they ensure acoustic comfort without space losses and without inspiring claustrophobia.

Bizo, F.↗

Concerning the sound insulation of building elements made up of light concretes

The sound insulating capacity of building elements made up of light concretes is considered. Analyzing differentially the behavior of light concrete building elements under the influence of incident acoustic energy and on the basis of experimental measurements, coefficients of correction are introduced into the basic formulas for calculating the sound insulating capacity for the 100-3,2000 Hz frequency band.

Giurgiu, I. I.↗

Highly efficient special sound absorbing solutions

Highly efficient special sound absorbing structures with the following criteria are considered: (1) A distribution surface of the sound absorbing material greater than that of the building element on which the structure is placed; (2) The highest possible absorption coefficient in the widest possible frequency band; and (3) adaptability to different construction and aesthetic conditions.

Ionescu, M.↗

Digital servo control of random sound test excitation

A digital servocontrol system for random noise excitation of a test object in a reverberant acoustic chamber employs a plurality of sensors spaced in the sound field to produce signals in separate channels which are decorrelated and averaged. The average signal is divided into a plurality of adjacent frequency bands cyclically sampled by a time division multiplex system, converted into digital form, and compared to a predetermined spectrum value stored in digital form. The results of the comparisons are used to control a time-shared up-down counter to develop gain control signals for the respective frequency bands in the spectrum of random sound energy picked up by the microphones.

Nakich, R. B.↗

Data for NASA's AVE 2 pilot experiment. Part 1: 25-mb sounding data and synoptic charts

Tabulated rawinsonde data at 25-mb intervals from surface to 25 mb is presented for the 54 stations participating in the Atmospheric Variability Experiment 11 pilot experiment which began at 12 GMT on May 11, 1974, and ended at 12 GMT on May 12, 1974. Soundings were made at 3 hour intervals. A brief discussion is included on methods of processing and data accuracy, and synoptic charts prepared from the the data are presented. The area covered by the sounding stations is the eastern United States, east of approximately 105 deg west longitude.

Scoggins, J. R.↗

Mississippi Sound remote sensing study

A study of the Mississippi Sound was initiated in early 1971 by personnel of NASA Earth Resources Laboratory. Four separate seasonal experiments consisting of quasi-synoptic remote and surface measurements over the entire area were planned. Approximately 80 stations distributed throughout Mississippi Sound were occupied. Surface water temperature and secchi extinction depth were measured at each station and water samples were collected for water quality analyses. The surface distribution of three water parameters of interest from a remote sensing standpoint - temperature, salinity and chlorophyll content - are displayed in map form. Areal variations in these parameters are related to tides and winds. A brief discussion of the general problem of radiative measurements of water temperature is followed by a comparison of remotely measured temperatures (PRT-5) to surface vessel measurements.

Atwell, B. H.↗

Remote temperature sounding in the presence of cloud by zenith scanning

The principles of remote sounding of vertical temperature profiles in planetary atmospheres containing cloud layers are presented for an approach that uses measurements at different angles to the local vertical to eliminate the unknown cloud effects. A numerical example for a model of the earth's atmosphere shows that soundings separated by 40 deg in zenith angle permit the recovery of the temperature profile with an error that is not significantly greater than that obtained in the clear atmosphere case, and without serious horizontal smear. It is proposed that the method will be valuable for the interpretation of measurements made by instruments on spin-stabilized spacecraft on planetary missions, since in these cases the required angular coverage is obtained automatically for most trajectories.

Taylor, F. W.↗

Effect of transverse velocity and temperature gradients on sound attenuation in two-dimensional ducts

An investigation is described of the effect of transverse mean-velocity and temperature gradients on sound attenuation in acoustically treated two-dimensional ducts. The results show that cooling the duct walls leads to channeling the sound toward the walls for both downstream and upstream propagation. The effect of mean-temperature gradients on the attenuation rates of the lowest three modes can be as important as the effect of mean-velocity gradients.

Nayfeh, A. H.↗

Sound separation probe

Probe separates sound waves from turbulent flow pressure fluctuations in ducted airstreams by using principle that sound waves and turbulent flow pressure perturbations travel at different velocities.

Moore, M. T.↗

Sound radiation from a subsonic rotor subjected to turbulence

The broadband sound radiated by a subsonic rotor subjected to turbulence in the approach stream has been analyzed. The power spectral density of the sound intensity has been found to depend on a characteristic time scale-namely, the integral scale of the turbulence divided by the axial flow velocity-as well as several length-scale ratios. These consist of the ratio of the integral scale to the acoustic wavelength, rotor radius, and blade chord. Due to the simplified model chosen, only a limited number of cascade parameters appear. Limited comparisons with experimental data indicate good agreement with predicted values.

Sevik, M.↗

Pressure contact sounding data for NASA's Atmospheric Variability Experiment (AVE 2)

The basic rawinsonde data are described at each pressure contact from the surface to sounding termination for the 54 stations participating in the AVE 2 pilot experiment. Soundings were taken at three-hour intervals from stations within the United States east of about 105 degrees west longitude. Methods of data reduction and estimates of data accuracy are discussed. Examples of the data records produced are shown. The AVE 2 pilot experiment was conducted as part of NASA's program to better understand and establish the extent of applications for meteorological satellite sensor data through correlative ground truth experiments and to provide basic experimental data for use in studies of atmospheric scales-of-motion interrelationships.

Fuelberg, H. E.↗

The 25-MB sounding data and synoptic charts for NASA's AVE 2 pilot experiment

Rawinsonde data were tabulated at 25-mb intervals from the surface to 25 mb for the 54 stations participating in the atmospheric variability experiment 2 Pilot Experiment which began at 12 Greenwich mean time on May 11 and ended at 12 Greenwich mean time on May 12, 1974. Soundings were made at 3 hour intervals. Methods of processing and data accuracy are discussed, and synoptic charts prepared from the data are presented. The area covered by the sounding stations is the eastern United States east of approximately 105 deg west longitude.

Scoggins, J. R.↗

Spinning mode sound propagation in ducts with acoustic treatment and sheared flow

The propagation of spinning mode sound was considered for a cylindrical duct with sheared steady flow. Calculations concentrated on the determination of the wall optimum acoustic impedance and the maximum possible attenuation. Both the least attenuated and higher radial modes for spinning lobe patterns were considered. A parametric study was conducted over a wide range of Mach numbers, spinning lobe numbers, sound frequency, and boundary layer thickness. A correlation equation was developed from theoretical considerations starting with the thin boundary layer approximation of Eversman. This correlation agrees well with the more exact calculations for inlets and provides a single boundary layer refraction parameter which determines the change in optimum wall impedance due to refraction effects.

Rice, E. J.↗

NASA plans for space-processing experiments on sounding rockets

Planning for sounding rocket space processing experiments in the second half of 1975 is reported. Currently operational sounding rocket systems are capable of carrying payloads containing more than 50 kg of experimental apparatus on trajectories including between 5 and 10 min of coasting flight above 100 km altitude. When equipped with stabilization systems to nullify angular velocities in their rotational degrees of freedom, these vehicles can provide an environment in which accelerations are less than 1 mm/sec per 2. The cost of flight operations to implement a rocket experiment program will be of the order of 2000 dollars per kg of discretionary payload, and within the next two years newly operational systems are expected to reduce the cost to about 700 dollars per kg.

Bredt, J. H.↗

An interdisciplinary study of the estuarine and coastal oceanography of Block Island Sound and adjacent New York coastal waters

The author has identified the following significant results. Photo-optical additive color quantitative measurements were made of ERTS-1 reprocessed positives of New York Bight and Block Island Sound. Regression of these data on almost simultaneous ship sample data of water's physical, chemical, biological, and optical properties showed that ERTS bands 5 and 6 can be used to predict the absolute value of the total number of particles and bands 4 and 5 to predict the relative extinction coefficient in New York Bight. Water masses and mixing patterns in Block Island Sound heretofore considered transient were found to be persistent phenomena requiring revision of existing mathematical and hydraulic models.

Yost, E. F.↗

Propagation of sound in elliptic ducts

The paper studies the propagation of sound in an elliptic duct, which is of considerable interest in the field of jet-engine noise reduction. The cutoff frequencies of the higher-order circumferential modes in an elliptic duct are calculated for various duct eccentricities. The results indicate that, if equal inlet area is retained, even major deformations of the inlet shape will have virtually no influence on the cutoff conditions of the radiated sound.

Lowson, M. V.↗

Sound propagation in curved ducts

An analysis of the sound field in a circularly curved duct of rectangular cross-section is carried out for both rigid and locally-reacting absorbing walls. The field is excited by a piston source at one end of the duct section, and comparisons of the acoustic field and the net power flow along the duct axis are made with corresponding results for a straight duct section for various frequencies. It is found that in general the curved duct yields a significant increase in sound attenuation along the duct axis as compared to the straight duct.

Myers, M. K.↗

Spinning mode sound propagation in ducts with acoustic treatment and sheared flow

The propagation of spinning mode sound was considered for a cylindrical duct with sheared steady flow. The calculations concentrated on the determination of the wall optimum acoustic impedance and the maximum possible attenuation. Both the least attenuated and higher radial modes for spinning lobe patterns were considered. A parametric study was conducted over a wide range of Mach numbers, spinning lobe numbers, sound frequency, and boundary layer thickness. A correlation equation was developed from theoretical considerations starting with the thin boundary layer approximation of Eversman. This correlation agrees well with the more exact calculations for inlets and provides a single boundary layer refraction parameter which determines the change in optimum wall impedance due to refraction effects.

Rice, E. J.↗