SEARCH · Search NASA

Results for “Spectral scheme”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

All sources NASA NTRS DOE OSTI

NASA NTRS1995

Vegetation species composition and canopy architecture information expressed in leaf water absorption measured in the 1000 nm and 2200 spectral region by an imaging spectrometer

Plant species composition and plant architectural attributes are critical parameters required for the measuring, monitoring, and modeling of terrestrial ecosystems. Remote sensing is commonly cited as an important tool for deriving vegetation properties at an appropriate scale for ecosystem studies, ranging from local to regional and even synoptic scales. Classical approaches rely on vegetation indices such as the normalized difference vegetation index (NDVI) to estimate biophysical parameters such as leaf area index or intercepted photosynthetically active radiation (IPAR). Another approach is to apply a variety of classification schemes to map vegetation and thus extrapolate fine-scale information about specific sites to larger areas of similar composition. Imaging spectrometry provides additional information that is not obtainable through broad-band sensors and that may provide improved inputs both to direct biophysical estimates as well as classification schemes. Some of this capability has been demonstrated through improved discrimination of vegetation, estimates of canopy biochemistry, and liquid water estimates from vegetation. We investigate further the potential of leaf water absorption estimated from Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) data as a means for discriminating vegetation types and deriving canopy architectural information. We expand our analysis to incorporate liquid water estimates from two spectral regions, the 1000-nm region and the 2200-nm region. The study was conducted in the vicinity of Jasper Ridge, California, which is located on the San Francisco peninsula to the west of the Stanford University campus. AVIRIS data were acquired over Jasper Ridge, CA, on June 2, 1992, at 19:31 UTC. Spectra from three sites in this image were analyzed. These data are from an area of healthy grass, oak woodland, and redwood forest, respectively. For these analyses, the AVIRIS-measured upwelling radiance spectra for the entire Jasper Ridge scene were transformed to apparent surface reflectance using a radiative transfer code-based inversion algorithm.

Green, Robert O.↗

NASA NTRS2003

Obliquity Driven Climate Change in Mars' Recent Past

We use the NASA/Ames grid Mars general circulation model with an updated radiation code and cloud nlicrophysics scheme. To speed up the simulations, we run the model at fairly coarse resolution (7.5" latitude x 22.5" longitude). Radiation Code Fluxes and heating rates are calculated from a radiation code based on the two-stream solution to radiative transfer that fully accounts for multiple scattering in the presence of gaseous absorp- tion. The model has 12 spectral intervals. Dust and water ice scattering properties are included. For dust, we use the Ockert-Bell [9] values in the visible, and Forget [IO] values in the infrared. For ice, we can either compute them online as the cloud evolves, or we can specify them. Gaseous opacities for water vapor and CO2 are calculated from correlated k-distributions taken from full line-by-line models. Cloud Microphysics Our cloud scheme is based on momentlorder scheme in which the mass mixing ratio and number density of the cloud ensemble are the advected species. From these we obtain a mean particle size and an estimate or the particle size distribution assuming a variance) which we then divide into 8 bins. Cloud microphysics is performed in each of these bins and includes nucleation, condensation, and gravitational settling. Dust is treated as a tracer and serves as condensation nuclei. The altered size distribution is then converted back into a mean size, a mixing ratio, and a particle number density.

Haberle, R. M.↗

NASA NTRS2008

High Vertically Resolved Atmospheric and Surface/Cloud Parameters Retrieved with Infrared Atmospheric Sounding Interferometer (IASI)

The Joint Airborne IASI Validation Experiment (JAIVEx) was conducted during April 2007 mainly for validation of the IASI on the MetOp satellite. IASI possesses an ultra-spectral resolution of 0.25/cm and a spectral coverage from 645 to 2760/cm. Ultra-spectral resolution infrared spectral radiance obtained from near nadir observations provide atmospheric, surface, and cloud property information. An advanced retrieval algorithm with a fast radiative transfer model, including cloud effects, is used for atmospheric profile and cloud parameter retrieval. This physical inversion scheme has been developed, dealing with cloudy as well as cloud-free radiance observed with ultraspectral infrared sounders, to simultaneously retrieve surface, atmospheric thermodynamic, and cloud microphysical parameters. A fast radiative transfer model, which applies to the cloud-free and/or clouded atmosphere, is used for atmospheric profile and cloud parameter retrieval. A one-dimensional (1-d) variational multi-variable inversion solution is used to improve an iterative background state defined by an eigenvector-regression-retrieval. The solution is iterated in order to account for non-linearity in the 1-d variational solution. It is shown that relatively accurate temperature and moisture retrievals are achieved below optically thin clouds. For optically thick clouds, accurate temperature and moisture profiles down to cloud top level are obtained. For both optically thin and thick cloud situations, the cloud top height can be retrieved with relatively high accuracy (i.e., error < 1 km). Preliminary retrievals of atmospheric soundings, surface properties, and cloud optical/microphysical properties with the IASI observations are obtained and presented. These retrievals will be further inter-compared with those obtained from airborne FTS system, such as the NPOESS Airborne Sounder Testbed - Interferometer (NAST-I), dedicated dropsondes, radiosondes, and ground based Raman Lidar. The capabilities of satellite ultra-spectral sounder such as the IASI are investigated indicating a high vertical structure of atmosphere is retrieved.

Zhou, Daniel K.↗

NASA NTRS1985

Efficient algorithms for use in probabilistic finite element analysis

This paper investigates the use of Fast Probability Integration (FPI) algorithms in a Finite Element environment. A method allowing the representation of correlated fields in terms of a vector of uncorrelated transformed variables, based on the spectral decomposition of the variance-covariance matrix is developed. The response of the deterministic model corresponding to selected perturbations of these uncorrelated variables is then obtained via a Newton-type iterative scheme. The results of the perturbed problems are used to construct a local representation of the model's behavior in the neighborhood of the deterministic state, which the FPI algorithm will use to estimate the reliability of the system. Although the proposed strategy has thus far only been applied to linear elastostatics, the extension of the method to a broader class of problems appears to be feasible.

Dias, J. B.↗

NASA NTRS1988

A spectral multi-domain technique for viscous compressible reacting flows

The first application of a spectral multidomain method for viscous compressible flow is presented. The method imposes a global flux balance condition at the interface so that high-order continuity of the solution is preserved. The solution scheme can be adapted to the particular requirement in each subdomain. To illustrate these advantages, a Mach 11 shock calculation is presented to study the chemical kinetics initiated as air passes through a fully resolved shock wave.

Macaraeg, M. G.↗

NASA NTRS2001

A Strategy to Assess Aerosol Direct Radiative Forcing of Climate Using Satellite Radiation Measurements

Atmospheric aerosols have a complex internal chemical composition and optical properties. Therefore it is difficult to model their impact on redistribution and absorption of solar radiation, and the consequent impact on atmospheric dynamics and climate. The use in climate models of isolated aerosol parameters retrieved from satellite data (e.g. optical thickness) may result in inconsistent calculations, if the model assumptions differ from these of the satellite retrieval schemes. Here we suggest a strategy to assess the direct impact of aerosol on the radiation budget at the top and bottom of the atmosphere using satellite and ground based measurements of the spectral solar radiation scattered by the aerosol. This method ensures consistent use of the satellite data and increases its accuracy. For Kaufman and Tanre: Strategy for aerosol direct forcing anthropogenic aerosol in the fine mode (e.g. biomass burning smoke and urban pollution) consistent use of satellite derived optical thickness can yield the aerosol impact on the spectral solar flux with accuracy an order of magnitude better than the optical thickness itself. For example, a simulated monthly average smoke optical thickness of 0.5 at 0.55 microns (forcing of 40-50 W/sq m) derived with an error of 20%, while the forcing can be measured directly with an error of only 0-2 W/sq m. Another example, the effect of large dust particles on reflection of solar flux can be derived three times better than retrievals of optical thickness. Since aerosol impacts not only the top of the atmosphere but also the surface irradiation, a combination of satellite and ground based measurements of the spectral flux, can be the most direct mechanism to evaluate the aerosol effect on climate and assimilate it in climate models. The strategy is applied to measurements from SCAR-B and the Tarfox experiments. In SCAR-B aircraft spectral data are used to derive the 24 hour radiative forcing of smoke at the top of the atmosphere of (Delta)F(sub 24hr)/(Delta)tau = - 25 +/- 5 W/sq m. Ground based data give forcing at the surface of (Delta)F(sub 24hr)/(Delta)taur = -80 +/- 5 W/sq m. In TARFOX a mixture of maritime and regional pollution aerosol resulted in a varied forcing at the top of the atmosphere, (Delta)F(sub 24hr)/(Delta)tau, between -26 W/sq 2 and -50 W/sq m depending on mixture of coarse and accumulation modes, for Angstrom exponents of 1.0 and 0.2 respectively.

Kaufman, Yoram J.↗

NASA NTRS1986

Multigrid acceleration of the flux split Euler equations

Multigrid acceleration is applied to a flux-split algorithm for solving the Euler equations in two and three dimensions. The basic algorithm is an implicit spatially-split approximate factorization method. The stability of the scheme in comparison to other factorization is examined. Results are presented for two-dimensional airfoil flows and three-dimensional wing flows which demonstrate substantially improved convergence with the multigrid algorithm. An asymptotic spectral radius of 0.89 and 0.93 is attained for a 97 x 17 x 17 wing solution at subcritical and supercritical conditions, respectively.

Anderson, W. K.↗

NASA NTRS1994

ISAMS observations of stratospheric aerosol

The Improved Stratospheric and Mesospheric (ISAMS) on board the Upper Atmosphere Research Satellite (UARS) incorporates a 12.1 micron window channel for the measurement of aerosol opacity. The retrieval scheme is discussed briefly and preliminary observations of the Mt. Pinatubo aerosol cloud are presented and compared with SAGE 2 observations at 1.02 microns. The effect of aerosol on other ISAMS channels and its spectral dependence is discussed.

Lambert, Alyn↗

NASA NTRS1995

Large-eddy simulation of flow past a circular cylinder

Some of the most challenging applications of large-eddy simulation are those in complex geometries where spectral methods are of limited use. For such applications more conventional methods such as finite difference or finite element have to be used. However, it has become clear in recent years that dissipative numerical schemes which are routinely used in viscous flow simulations are not good candidates for use in LES of turbulent flows. Except in cases where the flow is extremely well resolved, it has been found that upwind schemes tend to damp out a significant portion of the small scales that can be resolved on the grid. Furthermore, it has been found that even specially designed higher-order upwind schemes that have been used successfully in the direct numerical simulation of turbulent flows produce too much dissipation when used in conjunction with large-eddy simulation. The objective of the current study is to perform a LES of incompressible flow past a circular cylinder at a Reynolds number of 3900 using a solver which employs an energy-conservative second-order central difference scheme for spatial discretization and compare the results obtained with those of Beaudan & Moin (1994) and with the experiments in order to assess the performance of the central scheme for this relatively complex geometry.

Mittal, R.↗

NASA NTRSDate not supplied

Single Field-of-View Sounding Atmospheric Products

The Single Field-of-view Sounder Atmospheric Products (SiFSAP) answer the need for a novel high spatial resolution atmospheric data product for major hyper-spectral infrared (IR) sounder missions. SiFSAP include a complete set of atmospheric vertical profiles, cloud, and surface properties, which are physically retrieved from top-of-atmosphere (TOA) spectral radiances under all-sky conditions via a rigorously defined radiative transfer relationship. By using a state-of-art fast radiative transfer model and a carefully designed optimal estimation based physical retrieval scheme, the SiFSAP algorithm ensures both an ultra-fast data processing speed needed for operational weather applications and the radiometric consistency desired by long-term climate studies. SiFSAP supplement existing operational products by providing data at the native resolution of the sounder instruments, the direct and accurate retrieval of cloud scattering properties, and the establishment of ‘radiance closure.’

Wan Wu↗

NASA NTRSDate not supplied

Single Field-of-View Sounding Atmospheric Products

The Single Field-of-view Sounder Atmospheric Products (SiFSAP) answer the need for a novel high spatial resolution atmospheric data product for major hyper-spectral infrared (IR) sounder missions. SiFSAP include a complete set of atmospheric vertical profiles, cloud, and surface properties, which are physically retrieved from top-of-atmosphere (TOA) spectral radiances under all-sky conditions via a rigorously defined radiative transfer relationship. By using a state-of-art fast radiative transfer model and a carefully designed optimal estimation based physical retrieval scheme, the SiFSAP algorithm ensures both an ultra-fast data processing speed needed for operational weather applications and the radiometric consistency desired by long-term climate studies. SiFSAP supplement existing operational products by providing data at the native spatial resolution of the sounder instruments, the direct and accurate retrieval of cloud scattering properties, and the establishment of ‘radiance closure.’

single-field-of-view, retrieval, hyperspectral sou↗

NASA NTRS1972

Side-viewing detector for a vacuum ultraviolet reflectometer.

The problem of detector response, which arises in the application of the reflectance vs angle of incidence method to the determination of optical constants in the vacuum UV spectral region is discussed. The analysis is performed for the side-viewing 1P21 detector sensitized with sodium salycilate. To take advantage of the wide selection photomultipliers available in the end-on configuration, a scheme for converting the end-on types to a side viewing geometry with a response uniform over several degrees of detector rotation is developed. It consists of a 32-mm diam spherical collector, located at the end of a cylindrical photomultiplier holder, with 12-mm entrance and viewing ports and a position for the sensitized screen also 12-mm in diameter.-

Osantowski, J. F.↗

NASA NTRS1988

Three-dimensional marginal separation

The three dimensional marginal separation of a boundary layer along a line of symmetry is considered. The key equation governing the displacement function is derived, and found to be a nonlinear integral equation in two space variables. This is solved iteratively using a pseudo-spectral approach, based partly in double Fourier space, and partly in physical space. Qualitatively, the results are similar to previously reported two dimensional results (which are also computed to test the accuracy of the numerical scheme); however quantitatively the three dimensional results are much different.

Duck, Peter W.↗

NASA NTRS2019

Measurement and Analysis of Terminal Shock Oscillation and Buffet Forcing Functions on a Launch Vehicle Payload Fairing

The buffet loads on a launch vehicle payload shroud can be impacted by the unsteadiness associated with a terminal shock at high subsonic speeds. At these conditions, flow accelerates to supersonic speeds on the nose of the payload fairing and is terminated by a normal shock on the cylindrical section downstream of the nose cone/cylinder shoulder. The location of the terminal shock and associated separated boundary layer is affected by the freestream Mach number, Reynolds number, and the pitch/yaw of the launch vehicle. Furthermore, even when the freestream conditions and vehicle attitude are constant, this terminal shock oscillates on the surface of the vehicle. The time-varying surface pressure associated with the terminal shock results in unsteady aerodynamic loads that may interact with vehicle structural dynamic modes and the guidance and control of the vehicle. Buffet testing of a 3-percent scale rigid buffet model of a launch vehicle cargo configuration with a tangent-ogive payload shroud was conducted in 2012 and in 2016. Initial buffet forcing functions (BFFs) utilized a coarse pressure sensor distribution on the vehicle surface in which a single longitudinal station with eight sensors observed the terminal shock environment at Mach 0.90. An examination of these circumferential pressures reveal large impulse-like pressure fluctuations and an asymmetry in pressure when the vehicle is at a nonzeroangle of attack that result in high BFFs. Revisions to the shock integration region were made based on computational fluid dynamics and shadowgraph video of shock motion to better represent the BFFs and reduce the high loads resulting from this environment. To more clearly understand this terminal shock environment, a second wind tunnel test was conducted with a dense distribution of 256 sensors at the terminal shock location. These sensor arrays presents a unique opportunity to observe the unsteady terminal shock environment and to characterize the impact of various integration schemes on the BFFs. This paper presents a summary of the development of BFFs for this terminal shock and a detailed analyses of shock region pressure coefficients, coherence, BFFs, shock location time histories, and power spectral density to help guide development of BFFs for other launch vehicle test and analysis programs.

Piatak, David J.↗

NASA NTRS2024

Decade-Long Ozone Profile Record from Suomi NPP OMPS Limb Profiler: Assessment of Version 2.6 Data

We evaluate a decadal ozone profile record derived from the Suomi National Polar-orbiting Partnership (SNPP) Ozone Mapping and Profiler Suite (OMPS) Limb Profiler (LP) satellite instrument. In 2023, the OMPS LP data were re-processed with the new version 2.6 retrieval algorithm that combines measurements from the ultraviolet (UV) and visible (VIS) parts of the spectra and employs the second order Tikhonov regularization to retrieve a single vertical ozone profile between 12.5 km (or cloud tops) and 57.5 km with the vertical resolution of about 1.9 - 2.5 km between 20-55 km. The algorithm uses radiances measured at six UV ozone-sensitive wavelengths (295, 302, 306, 312, 317 and 322 nm) paired with 353 nm, and one VIS wavelength at 606 nm combined with 510 nm and 675 nm to form a triplet. Each wavelength pair or triplet is used over a limited range of tangent altitudes where the sensitivity to ozone changes are strongest. A new implemented aerosol correction scheme is based on a gamma-function particle size distribution. Numerous calibration changes that affected ozone retrievals were also applied to measured LP radiances, including updates in altitude registration, radiometric calibration, stray light, and spectral registration. The key version 2.6 improvement is the reduction in relative drifts between LP ozone and correlative measurements, linked previously to a drift in the version 2.5 LP altitude registration. We compare LP ozone profiles with those from Aura Microwave Limb Sensor (MLS) to quantify ozone changes in version 2.6.

Limb scattering↗

DOE OSTI2025

A high-order computational framework for particle-resolved simulations of disperse multiphase flows

This work presents a high-order numerical approach for particle-resolved simulations of disperse multiphase flows, where the Navier-Stokes equations for fluid flow are solved using a high-order spectral element method in the Eulerian framework, and the particle phase is directly simulated with a discrete element method. The coupling between particles and fluids is explicitly handled using an adapted direct-forcing immersed boundary method. Unlike the conventional schemes, a high-order barycentric Lagrange interpolation method and a Gaussian projection kernel are used to ensure accurate momentum exchange between local boundary points and surrounding fluid nodes in the framework of high-order fluid solver. Benchmark tests of increasing complexity are conducted to demonstrate the accuracy and efficiency of our method. Here, it is found that our approach exhibits an excellent convergence performance, as the fluid element/grid is refined and the number of boundary points increases. Compared to conventional low-order methods, the proposed high-order framework enables the use of substantially larger fluid elements while maintaining high accuracy in modeling fluid-particle interactions, owing to the enhanced resolution of high-order basis functions. Moreover, since the primary unknowns are stored at element or grid nodes, the high-order approach offers improved efficiency in both CPU memory usage and total computational cost.

42 ENGINEERING↗

NASA NTRS1977

A Fourier approach to cloud motion estimation

A Fourier technique is described for estimating cloud motion from pairs of pictures using the phase of the cross spectral density. The method allows motion estimates to be made for individual spatial frequencies, which are related to cloud pattern dimensions. Results obtained are presented and compared with the results of a Fourier domain cross correlation scheme. Using both artificial and real cloud data show that the technique is relatively sensitive to the presence of mixtures of motions, changes in cloud shape, and edge effects.

Arking, A.↗

NASA NTRS1987

Superstructure high efficiency photovoltaics

A novel class of photovoltaic cascade structures is introduced which features multijunction upper subcells. These superstructure high efficiency photovoltaics (SHEP's) exhibit enhanced upper subcell spectral response because of the additional junctions which serve to reduce bulk recombination losses by decreasing the mean collection distance for photogenerated minority carriers. Two possible electrical configurations were studied and compared: a three-terminal scheme that allows both subcells to be operated at their individual maximum power points and a two-terminal configuration with an intercell ohmic contact for series interconnection. The three-terminal devices were found to be superior both in terms of beginning-of-life expectancy and radiation tolerance. Realistic simulations of three-terminal AlGaAs/GaAs SHEP's show that one sun AMO efficiencies in excess of 26 percent are possible.

Wagner, M.↗