SEARCH · Search NASA

Results for “Statics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

All sources NASA NTRS DOE OSTI

NASA NTRS1938

Behavior of Static Pressure Heads at High Speeds

These tests proved the practicability of static pressure heads at speeds up to 400 km/h (248.5 mph). It weighs 6.5 kg or 2.5 times as much as the old head. The position of the pressure head below the airplane was determined by bearing method at different speeds and for different lengths of suspension. It was established that for the measured speed range a 20 to 24 meter suspension length was sufficient to assure a minimum distance of 6 meters from the airplane without introducing any appreciable errors in the results due to wrong static pressure.

Danielzig, Helmut↗

NASA NTRS1993

Static internal performance of a single expansion ramp nozzle with multiaxis thrust vectoring capability

An investigation was conducted at static conditions in order to determine the internal performance characteristics of a multiaxis thrust vectoring single expansion ramp nozzle. Yaw vectoring was achieved by deflecting yaw flaps in the nozzle sidewall into the nozzle exhaust flow. In order to eliminate any physical interference between the variable angle yaw flap deflected into the exhaust flow and the nozzle upper ramp and lower flap which were deflected for pitch vectoring, the downstream corners of both the nozzle ramp and lower flap were cut off to allow for up to 30 deg of yaw vectoring. The effects of nozzle upper ramp and lower flap cutout, yaw flap hinge line location and hinge inclination angle, sidewall containment, geometric pitch vector angle, and geometric yaw vector angle were studied. This investigation was conducted in the static-test facility of the Langley 16-Foot Transonic Tunnel at nozzle pressure ratios up to 8.0.

Capone, Francis J.↗

NASA NTRS1992

Application of static and dynamic enclosures in determining DMS and OCS fluxes in Sphagnum peatlands

A static enclosure method was applied to determine the exchange of dimethyl sulfide (DMS) and OCS between the surface of Sphagnum peatlands and the atmosphere. Measurements were performed concurrently with dynamic enclosure measurements with S-free air used as sweep gas. DMS emission rates determined by both methods were comparable between 5 and 500 nmol/m(sup -2)h(sup -1). The dynamic method provided positive OCS flux rates (emission) for measurements performed at sites containing Sphagnum. Conversely, data from the static method indicated that OCS was consumed from the atmosphere. Measurements using both techniques at a site devoid of vegetation showed that peat is a source of both DMS and OCS. Results suggested that OCS is produced in surface peat but it is taken up from the atmosphere by Sphagnum mosses. However, the net effect of both processes is that OCS uptake exceeds emission. The dynamic enclosure technique is adequate to measure rates of emissions of S gases which are produced in peatlands but not consumed, as long as attention is paid to the rate of sweep flow.

Demello, William Zamboni↗

NASA NTRS1993

Experimental cavity pressure measurements at subsonic and transonic speeds. Static-pressure results

An experimental investigation was conducted to determine cavity flow-characteristics at subsonic and transonic speeds. A rectangular box cavity was tested in the Langley 8-Foot Transonic Pressure Tunnel at Mach numbers from 0.20 to 0.95 at a unit Reynolds number of approximately 3 x 10(exp 6) per foot. The boundary layer approaching the cavity was turbulent. Cavities were tested over a range of length-to-depth ratios (l/h) of 1 to 17.5 for cavity width-to-depth ratios of 1, 4, 8, and 16. Fluctuating- and static-pressure data in the cavity were obtained; however, only static-pressure data is analyzed. The boundaries between the flow regimes based on cavity length-to-depth ratio were determined. The change to transitional flow from open flow occurs at l/h at approximately 6-8 however, the change from transitional- to closed-cavity flow occurred over a wide range of l/h and was dependent on Mach number and cavity configuration. The change from closed to open flow as found to occur gradually. The effect of changing cavity dimensions showed that if the vlaue of l/h was kept fixed but the cavity width was decreased or cavity height was increased, the cavity pressure distribution tended more toward a more closed flow distribution.

Plentovich, E. B.↗

NASA NTRS1994

Static performance investigation of a skewed-throat multiaxis thrust-vectoring nozzle concept

The static performance of a jet exhaust nozzle which achieves multiaxis thrust vectoring by physically skewing the geometric throat has been characterized in the static test facility of the 16-Foot Transonic Tunnel at NASA Langley Research Center. The nozzle has an asymmetric internal geometry defined by four surfaces: a convergent-divergent upper surface with its ridge perpendicular to the nozzle centerline, a convergent-divergent lower surface with its ridge skewed relative to the nozzle centerline, an outwardly deflected sidewall, and a straight sidewall. The primary goal of the concept is to provide efficient yaw thrust vectoring by forcing the sonic plane (nozzle throat) to form at a yaw angle defined by the skewed ridge of the lower surface contour. A secondary goal is to provide multiaxis thrust vectoring by combining the skewed-throat yaw-vectoring concept with upper and lower pitch flap deflections. The geometric parameters varied in this investigation included lower surface ridge skew angle, nozzle expansion ratio (divergence angle), aspect ratio, pitch flap deflection angle, and sidewall deflection angle. Nozzle pressure ratio was varied from 2 to a high of 11.5 for some configurations. The results of the investigation indicate that efficient, substantial multiaxis thrust vectoring was achieved by the skewed-throat nozzle concept. However, certain control surface deflections destabilized the internal flow field, which resulted in substantial shifts in the position and orientation of the sonic plane and had an adverse effect on thrust-vectoring and weight flow characteristics. By increasing the expansion ratio, the location of the sonic plane was stabilized. The asymmetric design resulted in interdependent pitch and yaw thrust vectoring as well as nonzero thrust-vector angles with undeflected control surfaces. By skewing the ridges of both the upper and lower surface contours, the interdependency between pitch and yaw thrust vectoring may be eliminated and the location of the sonic plane may be further stabilized.

Wing, David J.↗

NASA NTRS1994

An experimental study on the static and dynamic characteristics of pump annular seals with two phase flow

A new test apparatus is reconstructed and is applied to investigate static and dynamic characteristics of annular seals leaked by two phase flow (gas and liquid) for turbopumps. The fluid forces acting on the seals are measured for various parameters such as void ratio, the preswirl velocity, the pressure difference between the inlet and outlet of the seal, the whirling amplitude, and the ratio of whirling speed to spinning speed of the rotor. Influence of these parameters on the static and dynamic characteristics is investigated from the experimental results. As a result, with regard to the two phase flow, as the void ratio increases, the flow induced force decreases. Another dynamic characteristic of two phase flow is as almost similar as that of the monophase flow.

Iwatsubo, T.↗

NASA NTRS1994

F/A-18 and F-16 forebody vortex control, static and rotary-balance results

The results from research on forebody vortex control on both the F/A-18 and the F-16 aircraft will be shown. Several methods of forebody vortex control, including mechanical and pneumatic schemes, will be discussed. The wind tunnel data includes both static and rotary balance data for forebody vortex control. Time lags between activation or deactivation of the pneumatic control and when the aircraft experiences the resultant forces are also discussed. The static (non-rotating) forces and pressures are then compared to similar configurations tested in the NASA Langley and DTRC Wind Tunnel, the NASA Ames 80'x120' Wind Tunnel, and in flight on the High Angle of Attack Research Vehicle (HARV).

Kramer, Brian↗

NASA NTRS1994

Static investigation of two fluidic thrust-vectoring concepts on a two-dimensional convergent-divergent nozzle

A static investigation was conducted in the static test facility of the Langley 16-Foot Transonic Tunnel of two thrust-vectoring concepts which utilize fluidic mechanisms for deflecting the jet of a two-dimensional convergent-divergent nozzle. One concept involved using the Coanda effect to turn a sheet of injected secondary air along a curved sidewall flap and, through entrainment, draw the primary jet in the same direction to produce yaw thrust vectoring. The other concept involved deflecting the primary jet to produce pitch thrust vectoring by injecting secondary air through a transverse slot in the divergent flap, creating an oblique shock in the divergent channel. Utilizing the Coanda effect to produce yaw thrust vectoring was largely unsuccessful. Small vector angles were produced at low primary nozzle pressure ratios, probably because the momentum of the primary jet was low. Significant pitch thrust vector angles were produced by injecting secondary flow through a slot in the divergent flap. Thrust vector angle decreased with increasing nozzle pressure ratio but moderate levels were maintained at the highest nozzle pressure ratio tested. Thrust performance generally increased at low nozzle pressure ratios and decreased near the design pressure ratio with the addition of secondary flow.

Wing, David J.↗

NASA NTRS1992

Investigation of static and cyclic bearing failure mechanisms for GR/EP laminates

Static, cyclic load (fatigue), and residual strength testing of graphite-epoxy (GR/EP) and aluminum pin bearing joints was completed to study bearing failure mechanisms. Parameters investigated included static strength, failure mode, fatigue life, hole growth, joint stiffness, and residual strength. Comparative evaluation of these results show that the MIL-HDBK-5 convention for the definition of bearing strength can be used for GR/EP materials while maintaining the same, or improved, level of structural integrity shown for metal joints.

Walter, R. W.↗

NASA NTRS1995

Sensitivity of engine-integrated waverider performance to static margin constraint

The performance of an engine-integrated wedge caret-wing waverider is optimized with respect to a set of geometric and flight attitude variables with constraints for steady state flight and static margin. The optimization is done with different values for the constraint on the static margin, and the resulting performances and geometries compared. This comparison is done for three performance parameters: L/D ratio, range coefficient, and a parameter that measures energy height gain per unit weight of fuel. The vehicle model incorporates a one-dimensional calculation on the forebody, inlet and wings. Fuel injection is done prior to the combustor entrance and flow properties are calculated with a one-dimensional model using a correlation for the shock shape in front of a transverse jet. The combustor is modeled as a shock-induced-combustion scramjet, and the nozzle flow field is calculated using the method of characteristics.

Tarpley, C.↗

NASA NTRS1997

Quasi-Static and Dynamic Response Characteristics of F-4 Bias-Ply and Radial-Belted Main Gear Tires

An investigation was conducted at Langley Research Center to determine the quasi-static and dynamic response characteristics of F-4 military fighter 30x11.5-14.5/26PR bias-ply and radial-belted main gear tires. Tire properties were measured by the application of vertical, lateral, and fore-and-aft loads. Mass moment-of-inertia data were also obtained. The results of the study include quasi-static load-deflection curves, free-vibration time-history plots, energy loss associated with hysteresis, stiffness and damping characteristics, footprint geometry, and inertia properties of each type of tire. The difference between bias-ply and radial-belted tire construction is given, as well as the advantages and disadvantages of each tire design. Three simple damping models representing viscous, structural, and Coulomb friction are presented and compared with the experimental data. The conclusions discussed contain a summary of test observations.

Davis, Pamela A.↗

NASA NTRS1997

An Experimental Investigation on the Static Equilibria and Dynamics of Liquid Bridges

A liquid bridge is a volume of liquid held between two or more solid supports. In the case of small disk supports with a sharp edge, the contact line between the bridge and the support disk will be anchored along the edge of the disk. For these cases the solid presents a geometrical singularity and the contact angle is indeterminate within a given range. This dissertation presents research conducted on liquid bridges with anchored contact lines. The three major topics covered are: determining the role of support geometry on static equilibria, liquid bridge dynamical behavior, and forces exerted by a liquid bridge on a support structure. The work was primarily experimental and conducted in a "Plateau tank" that allowed for the simulation of equivalent low-gravity conditions. The main thrust of the experimental work involved the use of a high resolution optical measurement system for imaging the dynamic zone shape, measurement of the static and dynamic contact angles and non-invasive analysis of excited surface modes. The liquid bridge was manipulated by computer controlled linear actuators which allowed precise control over the physical characteristics of the bridge. Experiments have been carried out to locate a bifurcation point along the maximum volume axisymmetric stability margin. Below the critical slenderness the bifurcation from an axisymmetric to a stable nonaxisymmetric configuration is supercritical. However, above this critical slenderness, the bifurcation is subcritical. A series of experiments analyzed the effect on axisymmetric bridge stability by using support disks of different radii, The shape behavior as transition points were approached, as well as the limiting case of a vanishing support radius was investigated. Experiments were performed to determine the resonant frequencies of axisymmetric bridges subject to lateral vibrations. Anomolous results led to a series of experiments to characterize nonlinearities present in the dynamic bridge shape. Finally, an attempt was made to experimentally measure the force exerted by the bridge on the lower support disk. This was done through use of a force balance apparatus. Particular attention was paid to the behavior of the bridge as the minimum volume stability limit was approached.

Resnick, Andrew Howard↗

NASA NTRS1997

Analysis of Wind Tunnel Longitudinal Static and Oscillatory Data of the F-16XL Aircraft

Static and oscillatory wind tunnel data are presented for a 10-percent-scale model of an F-16XL aircraft. Static data include the effect of angle of attack, sideslip angle, and control surface deflections on aerodynamic coefficients. Dynamic data from small-amplitude oscillatory tests are presented at nominal values of angle of attack between 20 and 60 degrees. Model oscillations were performed at five frequencies from 0.6 to 2.9 Hz and one amplitude of 5 degrees. A simple harmonic analysis of the oscillatory data provided Fourier coefficients associated with the in-phase and out-of-phase components of the aerodynamic coefficients. A strong dependence of the oscillatory data on frequency led to the development of models with unsteady terms in the form of indicial functions. Two models expressing the variation of the in-phase and out-of-phase components with angle of attack and frequency were proposed and their parameters estimated from measured data.

Klein, Vladislav↗

NASA NTRS1959

Elevated-Temperature Tests Under Static and Aerodynamic Conditions on Corrugated-Stiffened Panels

Thermal-insulating panels made of 0.005-inch-thick corrugated-stiffened sheets of Inconel X, backed by either bulk or reflective insulation, were tested under static and aerodynamic conditions at elevated temperatures up to 1,8000 F in front of a quartz-tube radiant heater and in a blowdown wind tunnel at a Mach number of 1.4. The tests were performed to provide information on the structural integrity and insulating effectiveness of thermal-insulating panels under the effects of aerodynamic heating. Static radiant-heating tests showed that the bulk insulation protected a load-carrying structure better than did the reflective insulation; however, the bulk insulation was much heavier than the reflective insulation and made the panel assemblies about three times as thick. Three of the four panels tested in the heated supersonic wind tunnel fluttered and failed dynamically. However, one panel demonstrated that flutter can be alleviated considerably with proper edge support. The panels deflected toward the heater (or into the airstream) at a rate which was primarily dependent on the temperature difference through the panel thickness.

Groen, Joseph M.↗

NASA NTRS1961

Low-Subsonic Measurements of the Static Stability and Control and Oscillatory Stability Derivatives of a Proposed Reentry Vehicle Having an Extensible Heat Shield for High-Drag Reentry

A low-speed investigation has been made to determine the static and oscillatory longitudinal and lateral stability derivatives of a proposed reentry vehicle having an extensible heat shield for reentry at high angles of attack. The heat shield is extended forward to give the desired aerodynamic-center position for high-angle-of-attack reentry and, after completion of the reentry phase, is retracted to give stability and trim for gliding flight at low angles of attack. Near an angle of attack of 900 the reentry configuration was statically stable both longitudinally and directionally, had positive dihedral effect, and had positive damping in roll but zero damping in yaw. The landing configuration had positive damping in pitch, roll, and yaw over the test angle-of-attack range but was directionally unstable and had negative dihedral effect between an angle of attack of about 10 and 20 deg.

Johnson, Joseph L., Jr.↗

NASA NTRS1959

Determination of Static Strength and Creep Buckling of Unstiffened Circular Cylinders Subjected to Bending at Elevated Temperatures

A method based on a semiempirical procedure is presented for predicting static strength and creep buckling of unstiffened circular cylinders subjected to pure bending at elevated temperatures. The method is applicable to cylinders that are loaded into the inelastic stress range prior to buckling and fail in a local mode. The predicted bending moments associated with static strength and creep buckling are compared with experimental data (taken from NACA RM 57El7) obtained from tests at 500 F on 5052-0 aluminum-alloy cylinders with radius- thickness ratios ranging from 125 to 250.

Mathauser, Eldon E.↗

NASA NTRS1959

Noise Survey Under Static Conditions of a Turbine-Driven Transonic Propeller with an Advance Ratio of 4.0

Overall sound-pressure levels and frequency spectra have been obtained under static conditions on a transonic propeller with an advance ratio of 4.0. This advance ratio represents a practical minimum tip speed for transonic flight speeds. The three-blade, 6.85-foot-diameter, 1,710-rpm propeller is powered by a turbine engine and is designed to operate at a forward Mach number of 0.82 at an altitude of 35,000 feet. The results consist of overall sound-pressure levels and frequency spectra obtained from analyses made of recordings taken during ground runups of the propeller with an advance ratio of 4.0. These results are compared with similar results obtained from a supersonic propeller having an advance ratio of 2.2 reported in NACA Technical Note 4059 and from a modified supersonic propeller having an advance ratio of 3.2 reported in NACA Technical Note 4172. The advance-ratio-4.0 propeller of the present investigation produced a maximum sound-pressure level of 117.5 decibels when corrected to 1,400 horsepower. This overall noise output represents a lowering of the maximum overall sound-pressure level by approximately 5 decibels from that of the advance-ratio-3.2 propeller and by 14 decibels from that of the advance-ratio-2.2 propeller at comparable engine horsepowers. The frequency spectrum for the present propeller was the same as that for the advance-ratio-3.2 propeller, that is, high sound-pressure levels for the low-blade-passage harmonics with a rapid decrease in level with increasing order of harmonic. The 5-decibels reduction, under static conditions, is not considered sufficient to warrant the increased weight and operational penalties that would accompany this selection over the more efficient advance-ratio-3.2 propeller. At high forward speeds, however, the noise level of the present advance-ratio-4.0 propeller, especially in the fre- quency range where passenger comfort is important, should probably be substantially lower than that of the advance-ratio-3.2 propeller.

Kurbjun, Max C.↗

NASA NTRS1959

Low-Subsonic Static Stability and Damping Derivatives at Angles of Attack From 0 deg to 90 deg for a Model with a Low-Aspect-Ratio Unswept Wing and Two Different Fuselage Forebodies

An investigation has been made in the Langley free-flight tunnel at low-subsonic speed to determine the static stability, control effectiveness, and damping in roll and yaw of a model with a low-aspect-ratio unswept wing and two different fuselage forebodies at angles of attack from 0 deg to 90 deg. Results were obtained with a fuselage configuration having a long pointed nose and a shorter rounded nose. Although the wing stalled at an angle of attack of about 12 deg, maximum lift did not occur until an angle of attack of about 40 deg or 50 deg was obtained. The static longitudinal stability of the model having a short rounded nose was greater than that of the model having a longer pointed nose over the entire angle-of-attack range. The pointed-nose model had large out-of-trim yawing moments above an angle of attack of about 40 deg. Shortening and rounding the nose of the model delayed these out-of-trim yawing moments to slightly higher angles of attack. Both models were directionally unstable above an angle of attack of about 20 deg, but both had positive effective dihedral over virtually the entire angle-of-attack range. At the higher angles of attack the pointed-nose model had generally better damping in roll than that of the rounded-nose model. Both models had very high damping in yaw at an angle of attack of about 50 deg or 60 deg.

Boisseau, Peter C.↗