Search NASA⌕ Search

SEARCH · Search NASA

Results for “Statistical error”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS2017

Updated MISR Dark Water Research Aerosol Retrieval Algorithm - Part 1: Coupled 1.1 km Ocean Surface Chlorophyll a Retrievals with Empirical Calibration Corrections

As aerosol amount and type are key factors in the 'atmospheric correction' required for remote-sensing chlorophyll alpha concentration (Chl) retrievals, the Multi-angle Imaging SpectroRadiometer (MISR) can contribute to ocean color analysis despite a lack of spectral channels optimized for this application. Conversely, an improved ocean surface constraint should also improve MISR aerosol-type products, especially spectral single-scattering albedo (SSA) retrievals. We introduce a coupled, self-consistent retrieval of Chl together with aerosol over dark water. There are time-varying MISR radiometric calibration errors that significantly affect key spectral reflectance ratios used in the retrievals. Therefore, we also develop and apply new calibration corrections to the MISR top-of-atmosphere (TOA) reflectance data, based on comparisons with coincident MODIS (Moderate Resolution Imaging Spectroradiometer) observations and trend analysis of the MISR TOA bidirectional reflectance factors (BRFs) over three pseudo-invariant desert sites. We run the MISR research retrieval algorithm (RA) with the corrected MISR reflectances to generate MISR-retrieved Chl and compare the MISR Chl values to a set of 49 coincident SeaBASS (SeaWiFS Bio-optical Archive and Storage System) in situ observations. Where Chl(sub in situ) less than 1.5 mg m(exp -3), the results from our Chl model are expected to be of highest quality, due to algorithmic assumption validity. Comparing MISR RA Chl to the 49 coincident SeaBASS observations, we report a correlation coefficient (r) of 0.86, a root-mean-square error (RMSE) of 0.25, and a median absolute error (MAE) of 0.10. Statistically, a two-sample Kolmogorov- Smirnov test indicates that it is not possible to distinguish between MISR Chl and available SeaBASS in situ Chl values (p greater than 0.1). We also compare MODIS-Terra and MISR RA Chl statistically, over much broader regions. With about 1.5 million MISR-MODIS collocations having MODIS Chl less than 1.5 mg m(exp -3), MISR and MODIS show very good agreement: r = 0.96, MAE = 0.09, and RMSE = 0.15. The new dark water aerosol/Chl RA can retrieve Chl in low-Chl, case I waters, independent of other imagers such as MODIS, via a largely physical algorithm, compared to the commonly applied statistical ones. At a minimum, MISR's multi-angle data should help reduce uncertainties in the MODIS-Terra ocean color retrieval where coincident measurements are made, while also allowing for a more robust retrieval of particle properties such as spectral single-scattering albedo.

Limbacher, James A.↗
NASA NTRS2017

Quantifying Pilot Contribution to Flight Safety During Dual Generator Failure

Accident statistics cite flight crew error in over 60% of accidents involving transport category aircraft. Yet, a well-trained and well-qualified pilot is acknowledged as the critical center point of aircraft systems safety and an integral safety component of the entire commercial aviation system. No data currently exists that quantifies the contribution of the flight crew in this role. Neither does data exist for how often the flight crew handles non-normal procedures or system failures on a daily basis in the National Airspace System. A pilot-in-the-loop high fidelity motion simulation study was conducted by the NASA Langley Research Center in partnership with the Federal Aviation Administration (FAA) to evaluate the pilot's contribution to flight safety during normal flight and in response to aircraft system failures. Eighteen crews flew various normal and non-normal procedures over a two-day period and their actions were recorded in response to failures. To quantify the human's contribution, crew complement was used as the experiment independent variable in a between-subjects design. Pilot actions and performance when one of the flight crew was unavailable were also recorded for comparison against the nominal two-crew operations. This paper details diversion decisions, perceived safety of flight, workload, time to complete pertinent checklists, and approach and landing results while dealing with a complete loss of electrical generators. Loss of electrical power requires pilots to complete the flight without automation support of autopilots, flight directors, or auto throttles. For reduced crew complements, the additional workload and perceived safety of flight was considered unacceptable.

Etherington, Timothy J.↗
NASA NTRS2024

Modeling Entanglement-Based Quantum Key Distribution for the NASA Quantum Communications Analysis Suite

One of the most practical, and sought after, applications of quantum mechanics in the field of information science is the use of entanglement distribution to communicate quantum information effectively. Similar to the continued improvements of functional quantum computers over the past decade, advances in demonstrations of entanglement distribution over long distances may enable new applications in aeronautics and space communications. The existing NASA Quantum Communications Analysis Suite (NQCAS) software models such applications, but limited experimental data exists to verify the model’s theoretical results. There is, however, a large body of experimental data in the relevant literature for entanglement-based quantum key distribution (QKD). This paper details a Monte Carlo based QKD model that uses NQCAS input parameters to generate an estimated QKD link budget for verification of NQCAS. The model generates link budget statistics like key rates, error rates, and S values that can then be compared to the experimental values in the literature. Preliminary comparisons show many similarities between the simulated and experimental data, supporting the model’s validity. A verified NQCAS model will inform experimental work conducted in Glenn Research Center’s (GRC) NASA Quantum Metrology Laboratory (NQML), supporting the United States Quantum Initiative and potential NASA missions.

NASA Quantum Communications Analysis Suite↗
NASA NTRS1981

Galileo maneuver analysis

In the maneuver analysis of the Galileo spacecraft, analytic models have been developed to assess the performance of an interplanetary dual spin spacecraft. These models take into account all the important effects of dual spin and flexible body dynamics to determine the spacecraft capability to achieve precise velocity changes for a variety of maneuver modes, as dictated by the requirements and as are tested and verified by computer simulation. Proportional velocity change magnitude accuracies as small as 0.34%, proportional velocity change pointing accuracies as little as 10 milliradians and fixed velocity change accuracies as precise as 0.015 m/sec are indicative of the stringency of these requirements. Error sources considered in the statistical analysis include probabilistic uncertainties due to wobble, plume impingement, nutation, thruster and accelerometer misalignments and radial offsets, gyro drift, burn timing, mass properties and algorithm errors. With its twelve thrusters, the versatility of the spacecraft to maneuver among the Galilean moons for eleven encounters after delivering a probe into the Jovian atmosphere provides a new level of challenge in the area of maneuver analysis.

Longuski, J. M.↗
NASA NTRS1978

Model for redundant-sensor signal errors

Report describes application of order statistics to analysis of failure modes in redundant systems. Report provides detailed mathematical discussion of approach, accompanied by graphs and equations. Techniques are relevant to process that demand high reliability, such as manufacture of dangerous chemicals. It also includes discussion of quad-redundant system.

Sowada, D. J.↗
NASA NTRS2012

Interval Management with Spacing to Parallel Dependent Runways (IMSPIDR) Experiment and Results

An area in aviation operations that may offer an increase in efficiency is the use of continuous descent arrivals (CDA), especially during dependent parallel runway operations. However, variations in aircraft descent angle and speed can cause inaccuracies in estimated time of arrival calculations, requiring an increase in the size of the buffer between aircraft. This in turn reduces airport throughput and limits the use of CDAs during high-density operations, particularly to dependent parallel runways. The Interval Management with Spacing to Parallel Dependent Runways (IMSPiDR) concept uses a trajectory-based spacing tool onboard the aircraft to achieve by the runway an air traffic control assigned spacing interval behind the previous aircraft. This paper describes the first ever experiment and results of this concept at NASA Langley. Pilots flew CDAs to the Dallas Fort-Worth airport using airspeed calculations from the spacing tool to achieve either a Required Time of Arrival (RTA) or Interval Management (IM) spacing interval at the runway threshold. Results indicate flight crews were able to land aircraft on the runway with a mean of 2 seconds and less than 4 seconds standard deviation of the air traffic control assigned time, even in the presence of forecast wind error and large time delay. Statistically significant differences in delivery precision and number of speed changes as a function of stream position were observed, however, there was no trend to the difference and the error did not increase during the operation. Two areas the flight crew indicated as not acceptable included the additional number of speed changes required during the wind shear event, and issuing an IM clearance via data link while at low altitude. A number of refinements and future spacing algorithm capabilities were also identified.

Baxley, Brian T.↗
NASA NTRS1973

Analysis of temperature-dependent neutron transmission and self-indication measurements on tantalum at 2-keV neutron energy

The method of pseudo-resonance cross sections is used to analyze published temperature-dependent neutron transmission and self-indication measurements on tantalum in the unresolved region. In the energy region analyzed, 1825.0 to 2017.0 eV, a direct application of the pseudo-resonance approach using a customary average strength function will not provide effective cross sections which fit the measured cross section behavior. Rather a local value of the strength function is required, and a set of resonances which model the measured behavior of the effective cross sections is derived. This derived set of resonance parameters adequately represents the observed resonance hehavior in this local energy region. Similar analyses for the measurements in other unresolved energy regions are necessary to obtain local resonance parameters for improved reactor calculations. This study suggests that Doppler coefficients calculated by sampling from grand average statistical distributions over the entire unresolved resonance region can be in error, since significant local variations in the statistical distributions are not taken into consideration.

Semler, T. T.↗
NASA NTRS1990

Analysis of faults in an N-version software experiment

The authors have conducted a large-scale experiment in N-version programming. A total of 27 versions of a program were prepared independently from the same specification at two universities. The results of executing the versions revealed that the versions were individually extremely reliable but that the number of input cases in which more than one failed was substantially more than would be expected if they were statistically independent. After the versions had been executed, the failures of each version were examined and the associated faults located. The analysis showed that in some cases the programmers made equivalent logical errors, indicating that some parts of the problem were simply more difficult than others. The authors also found cases in which apparently different logical errors yielded faults that caused statistically correlated failures, indicating that there are special cases in the input space that present difficulty in various parts of the solution. A formal model is presented to explain this phenomenon. It appears that minor differences in the software development environment would not have a major impact in reducing the incidence of faults that cause correlated failures.

Brilliant, Susan S.↗
NASA NTRS1990

A statistical study of the differential very long baseline interferometry delay rate error budget

The delta differential one-way Doppler (delta-DOD) error budget is assessed by analyzing 12 years of dual-frequency Deep Space Network very long baseline interferometry data. A typical delta-DOD observation is outlined, and the Magellan error budget along with tropospheric effects are considered. Formation of quasar-quasar observables, RMS delta-DOD residual, angular source separation and time separation between observations are discussed, along with elevation angle and atmospheric pathlength dependence, solar-plasma and ionospheric effects. It is concluded that the weak dependence of the delta-DOD error on angular source separation can mean that quasars with larger angular separation from a spacecraft may be used as navigation reference with little increase in the delta-DOD error. It is also indicated that the delta-DOD errors are dominated by wet troposphere fluctuations, and the results of numerical integrations for the single-station RMS delay rate at different elevation angles are presented.

Edwards, Charles D.↗
NASA NTRS1980

Composite model of a 3-D image

This paper presents a composite model of a moving (3-D) image especially useful for the sequential image processing and encoding. A non-linear predictor based on the composite model is described. The performance of this predictor is used as a measure of the validity of the model for a real image source. The minimization of a total mean square prediction error provides an inequality which determines a condition for the profitable use of the composite model and can serve as a decision device for the selection of the number of subsources within the model. The paper also describes statistical properties of the prediction error and contains results of computer simulation of two non-linear predictors in the case of perfect classification between subsources.

Dukhovich, I. J.↗
NASA NTRS2017

A Non-Intrusive Algorithm for Sensitivity Analysis of Chaotic Flow Simulations

We demonstrate a novel algorithm for computing the sensitivity of statistics in chaotic flow simulations to parameter perturbations. The algorithm is non-intrusive but requires exposing an interface. Based on the principle of shadowing in dynamical systems, this algorithm is designed to reduce the effect of the sampling error in computing sensitivity of statistics in chaotic simulations. We compare the effectiveness of this method to that of the conventional finite difference method.

Blonigan, Patrick J.↗
NASA NTRS1988

Modeling and measurement of error propagation in a multimodule computing system

An error propagation model has been developed for multimodule computing systems in which the main parameters are the distribution functions of error propagation times. A digraph model is used to represent a multimodule computing system, and error propagation in the system is modeled by general distributions of error propagation times between all pairs of modules. Two algorithms are developed to compute systematically and efficiently the distributions of error propagation times. Experiments are also conducted to measure the distributions of error propagation times with the fault-tolerant microprocessor (FTMP). Statistical analysis of experimental data shows that the error propagation times in FTMP do not follow a well-known distribution, thus justifying the use of general distributions in the present model.

Shin, Kang G.↗
NASA NTRS1985

Synoptic scale forecast skill and systematic errors in the MASS 2.0 model

The synoptic scale performance characteristics of MASS 2.0 are determined by comparing filtered 12-24 hr model forecasts to same-case forecasts made by the National Meteorological Center's synoptic-scale Limited-area Fine Mesh model. Characteristics of the two systems are contrasted, and the analysis methodology used to determine statistical skill scores and systematic errors is described. The overall relative performance of the two models in the sample is documented, and important systematic errors uncovered are presented.

Koch, S. E.↗
NASA NTRSDate not supplied

Is There A Relationship Between Cornered-Hat Methods and A Residual Approach to Estimate System Uncertainty?

Recently a relationship has been established between a now traditional residual diagnostic used to estimate observation, background and analysis error covariances of interest to data assimilation and the three-cornered hat (3CH) method. An existing extension of the traditional residual diagnostic uses residuals from a fixed lag-1 Kalman smoother to retrieve system (model) error covariance. It is thus natural to ask if an additional relationship can be established between this extended residual method and some form of cornered--hat method. The answer might seem straightforward. Unlike in the standard residual estimation case, attempting to estimate model error amounts to estimating the statistics of a residual quantity itself. As shown in this presentation, in such cases the 3CH method becomes trivial: the sought out uncertainty can be derived directly from the covariance of the residual quantity at hand. In the particular case of estimating model error, one of the corners would have to be composed of vectors providing estimates of model error; these are not typically available in practice. Therefore, at first glance the present work finds no relationship between the lag-1 smoother residual diagnostic for system error estimation and cornered--hat methods. However, the work suggests that a two-tiered 3CH might be all that is necessary for system uncertainty to be obtained with 3CH.

Ricardo Todling↗
NASA NTRS1991

Evaluating the design of satellite scanning radiometers for earth radiation budget measurements with system simulations. Part 1: Instantaneous estimates

A set of system simulations was performed to evaluate candidate scanner configurations to fly as a part of the Earth Radiation Budget Instrument (ERBI) on the polar platforms during the 1990's. The simulation is considered of instantaneous sampling (without diurnal averaging) of the longwave and shortwave fluxes at the top of the atmosphere (TOA). After measurement and subsequent inversion to the TOA, the measured fluxes were compared to the reference fluxes for 2.5 deg lat/long resolution targets. The reference fluxes at this resolution are obtained by integrating over the 25 x 25 = 625 grid elements in each target. The differences between each of these two resultant spatially averaged sets of target measurements (errors) are taken and then statistically summarized. Five instruments are considered: (1) the Conically Scanning Radiometer (CSR); (2) the ERBE Cross Track Scanner; (3) the Nimbus-7 Biaxial Scanner; (4) the Clouds and Earth's Radiant Energy System Instrument (CERES-1); and (5) the Active Cavity Array (ACA). Identical studies of instantaneous error were completed for many days, two seasons, and several satellite equator crossing longitudes. The longwave flux errors were found to have the same space and time characteristics as for the shortwave fluxes, but the errors are only about 25 pct. of the shortwave errors.

Stowe, Larry↗
NASA NTRS2018

Combined Error and Uncertainty Estimates for CFD Problems

Given input sources of uncertainty, non-intrusive uncertainty propagation methods quantify the uncertainty in output quantities of interest (QoI) by performing a nite number of CFD (Computational Fluid Dynamics) instance realizations needed in the calculation of output statistics. It is well known that this introduces multiple sources of error. CFD codes often utilize finite-dimensional approximation (grids, basis functions, etc.) thus incurring CFD numerical errors often approximately reinterpreted as a statistical bias. Uncertainty propagation methods calculate uncertainty statistics for output quantities of interest using a numerical method (e.g. deterministic quadrature, sampling, etc.) thus incurring UQ (Uncertainty Quantification) numerical errors. Importance of quantifying these errors in large scale scientific computing: How accurate is an output statistic?; How should additional computational resources be invested to further reduce the error in a statistic?

Posteriori↗
NASA NTRS1988

Statistical corrections to the NMC medium range 700 mb height forecasts

This paper examines four statistical procedures for correcting the NMC medium-range forecast (MRF) errors in the 700-mb heights over the Northern Hemisphere. The tests were designed to include normal operational constraints, such as frequent changes in the forecast model and the lack of long-term forecast histories on which to base estimates of systematic errors and climate drifts. It was found that the two statistical procedures which provided a substantial reduction in mean square error were a procedure based on simple regression correction at each grid point and one based on lagged-average correction with one day lag at each grid point.

Schemm, Jae-Kyung E.↗