Search NASA⌕ Search

SEARCH · Search NASA

Results for “TARGETS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Fragmentation of Fe nuclei on carbon, hydrogen and CH2 targets. I - Individual charge changing and total cross sections. II - Isotopic cross sections

The fragmentation of Fe nuclei in carbon and CH2 targets at energies of 650, 800, and 950 MeV/nuc has been studied. Direct measurements of the interaction between Fe nuclei and the carbon and CH2 targets were carried out. The Fe to H charge changing cross sections derived for selected nuclei showed a clear energy dependence, consistent with the results of Westfall et al. (1979). Values for the total inelastic cross section Fe to H charge changing were obtained by two methods: the first method involved subtracting the total CH2 and C cross sections (values of 703 plus or minus 9 mb and 65 plus or minus 10 mb at 950 MeV/nuc and 650 MeV/nuc, respectively were obtained). The same cross sections were obtained by adding the individual charge changing cross sections. A cross section for Fe to fragment into lower mass Fe isotopes of 65 plus or minus 5 mb was also observed, giving total inelastic mass changing cross sections of 768 plus or minus 11 mb and 716 plus or minus 12 mb, respectively. In addition, the individual isotopic cross sections for Z equals 16-25 are reported.

Brautigam, D. A.↗

Effect of subpixel-sized cloud on target discrimination from satellite data

The paper reports results of a study of the effects of subpixel-sized clouds on remotely sensed radiance; the NOAA-7 Advanced Very High Resolution Radiometer was used in the study. It is noted that it is quite possible that clouds could exist with dimensions of less than 1 x 1 km, which will not be resolvable as discrete pixels filled only by cloud, but which will be recorded as pixels with radiance values not characteristic of the ground target. It is shown that for a clear atmosphere the presence of even 20% cloud produces a fivefold decrease or worse in vegetative index at all scan angles for both pure and mixed targets. These effects are large and show that undetected cloud can produce drastic changes in combinations of recorded radiance used for vegetative assessment.

Duggin, M. J.↗

Improved pointing at trackable targets by integrating control valve signals

A compact, low-cost add-on electronic module has been developed for the STRAP III control system to improve pointing at trackable targets. The module provides peak-to-peak limit cycle excursions of + or - 5 arcseconds while tracking a +3 magnitude or brighter star. This is achieved without using rate-integrating gyroscopes, thus reducing payload length, weight, cost, and preparation time. This module has flown successfully five times. In May 1981, it improved the performance of a two-startracker attitude control system with TV camera and joystick control which pointed at a nontrackable target. This paper describes the operation of the module, how it alters the ordinary STRAP III operation, and how it was developed using an analog-computer-based rocket flight simulator.

Stone, R. W.↗

FLIR target screening

Methods for the segmentation and recognition of individual targets sensed with forward looking infrared detectors are discussed. Particular attention is given to an adaptive multi-scenario target screener.

Aggarwal, R.↗

Target reflectance measurements for calibration of lidar atmospheric backscatter data

Wavelength and angular dependence of reflectances and depolarization in the 9-11 micron region are reported for four standard targets: flowers of sulfur, flame-sprayed aluminum, 20-grit sandblasted aluminum, and 400-grit silicon carbon sandpaper. Measurements are presented and compared using a CW CO2 grating-tunable laser in a laboratory backscatter apparatus, an integrating sphere, and a coherent pulsed TEA-CO2 lidar system operating in the 9-11 micron region. Reflectance theory related to the use of hard targets to calibrate lidar atmospheric backscatter data is discussed.

Kavaya, M. J.↗

Anomalies within the system - Rochechouart target rock meteorite

Contaminated impact crater formations are pertinent to the study of meteoritic contamination at the Cretaceous-Tertiary boundary and other Ir-enriched layers. Target mixing considerations and volumetric estimates of Rochechouart breccias are presently combined with the geochemistry of both major and siderophile trace elements, to evaluate how the chemistry of the preserved target rock-projectile mixture evolved since deposition. Over 99 percent of the mass of extraterrestrial Ir and Os in preserved formations at Rochechouart is located in suevite-like breccias and impact melts. Hydrothermal alteration and/or weathering are the most likely processes to explain both major and trace element redistribution in Rochechouart formations.

Lambert, P.↗

Microwave signature of thick-target electron beams in solar flares

The steady-state behavior of a flux of nonthermal electrons injected into a fully ionized thick target is examined. Owing to the (inverse square) energy dependence of the Coulomb collisional cross section, it is found that injected electron distributions that are monotonically decreasing functions of electron energy develop at finite depths into distributions that have 'humps' in velocity space; the electron energy corresponding to the hump correlates with the overlying particle column density to the target. This results in a two-stream unstable situation. The distribution is constantly being relaxed by quasi-linear relaxation and re-created by collisions; in this way a steady nonthermal level of Langmuir plasma waves is created, and these waves in turn produce microwave plasma radiation with a typical flux of 3 x 10 to the -16th erg/sq cm-sec. This flux can be enhanced by a factor of up to 100 by a high level of low-frequency (such as ion-acoustic) turbulence, which prevents quasi-linear relaxation for a sufficient fraction of the path length.

Emslie, A. G.↗

A Production System Model of Capturing Reactive Moving Targets

Subjects manipulated a control stick to position a cursor over a moving target that reacted with a computer-generated escape strategy. The cursor movements were described at two levels of abstraction. At the upper level, a production system described transitions among four modes of activity; rapid acquisition, close following, a predictive mode, and herding. Within each mode, differential equations described trajectory-generating mechanisms. A simulation of this two-level model captures the targets in a manner resembling the episodic time histories of human subjects.

Jagacinski, R. J.↗

Evaluation of the radar response to land surfaces and volumes: Examination of theoretical models, target statistics, and applications

Four areas of L-band radar remote sensing of terrain were examined: (1) the behavior of the radar backscatter coefficient of distributed surface and volumes as a function of the targets' dielectric and geometric parameters and as a fnction of their physical parameters; (2) the correspondence of the angular behavior of the relative backscatter coefficient as extracted from SIR-B digital imagery and truck mounted L-band scatterometer measurements for about 100 fields; (3) the statistical behavior of SIR-B image density for targets that appear homogeneous on Thematic Mapper (TM) optical imagery and/or color IR photography; and (4) the applicability of SIR-B imagery both alone and in conjunction with TM imagery for the classification and monitoring of land cover and renewable resources.

Ulaby, F. T.↗

Determination of convective diffusion heat/mass transfer rates to burner rig test targets comparable in size to cross-stream jet diameter

Two sets of experiments have been performed to be able to predict the convective diffusion heat/mass transfer rates to a cylindrical target whose height and diameter are comparable to, but less than, the diameter of the circular cross-stream jet, thereby simulating the same geometric configuration as a typical burner rig test specimen located in the cross-stream of the combustor exit nozzle. The first set exploits the naphthalene sublimation technique to determine the heat/mass transfer coefficient under isothermal conditions for various flow rates (Reynolds numbers). The second set, conducted at various combustion temperatures and Reynolds numbers, utilized the temperature variation along the surface of the above-mentioned target under steady-state conditions to estimate the effect of cooling (dilution) due to the entrainment of stagnant room temperature air. The experimental information obtained is used to predict high temperature, high velocity corrosive salt vapor deposition rates in burner rigs on collectors that are geometrically the same. The agreement with preliminary data obtained from Na2SO4 vapor deposition experiments is found to be excellent.

Gokoglu, S. A.↗

Consideration of radar target glint from ST during OMV rendezvous

The nature of radar target glint and the factors upon which it depends when using the Hubble Space Telescope as a radar target is discussed. An analysis of the glint problem using a 35 MHz or 94 MHz radar on the orbital maneuvering vehicle is explored. A strategy for overcoming glint is suggested.

Mcdonald, M. W.↗

Voyager 2 Uranus targeting strategy

One of the major challenges involved in the Voyager 2 Uranus flyby is to deliver the spacecraft to an appropriate aimpoint at the optimum time, so as to maximize the science return of the mission, while yet keeping propellant expenditure low. An unusual targeting strategy has been devised to satisfy these requirements. Its complexity arises from the great distance of the planet Uranus and the limited performance capabilities of Voyager. This selected strategy is developed in relation to a set of candidate strategies, mission requirements and shifting science objectives. The analysis of these candidates is conducted via a Monte Carlo simulation, the results of which yield data for the comparative evaluation and eventual and selection of the actual targeting strategy to be employed.

Cesarone, R. J.↗

Determination of convective diffusion heat/mass transfer rates to burner rig test targets comparable in size to cross-stream jet diameter

Two sets of experiments have been performed to be able to predict the convective diffusion heat/mass transfer rates to a cylindrical target whose height and diameter are comparable to, but less than, the diameter of the circular cross-stream jet, thereby simulating the same geometric configuration as a typical burner rig test specimen located in the cross-stream of the combustor exit nozzlle. The first set exploits the naphthalene sublimation technique to detetermine the heat/mass transfer coefficient under isothermal conditions for various flow rates (Reynolds numbers). The second set, conducted at various combustion temperatures and Reynolds numbers, utilized the temperature variation along the surface of the above-mentioned target under steady-state conditions to estimate the effect of cooling (dilution) due to the entrainment of stagnant room temperature air. The experimental information obtained is used to predict high temperature, high velocity corrosive salt vapor deposition rates in burner rigs on collectors that are geometrically the same. The agreement with preliminary data obtained from Na2S04 vapor deposition experiments is found to be excellent.

Gokoglu, S. A.↗

External calibration of SIR-B imagery with area-extended and point targets

Data-takes on two ascending orbits of the Shuttle Imaging Radar-B (SIR-B) over an agricultural test site in west-central Illinois were used to establish end-to-end transfer functions for conversion of the digital numbers on the 8-bit image to values of the radar backscattering coefficient sigma sup 0 (sq m/sq. m) in dB. The transfer function for each data-take was defined by the SIR-B response to an array of six calibrated point targets of known radar cross-section (transponders) and to a large number of area-extended targets also with known radar cross-section as measured by externally calibrated, truck-mounted scatterometers. The radar cross-section of each transponder at the SIR-B center frequency was measured on an antenna range as a function of local angle of incidence. Two truck-mounted scatterometers observed 20 to 80 agricultural fields daily at 1.6 GHz with HH polarization and at azimuth viewing angles and incidence angles equivalent to those of the SIR-B. The form of the transfer function is completely defined by the SIR-B receiver and the incoherent averaging procedure incorporated into production of the standard SIR-B image product.

Dobson, M. C.↗

Centrifuge impact cratering experiments: Scaling laws for non-porous targets

This research is a continuation of an ongoing program whose objective is to perform experiments and to develop scaling relationships for large body impacts onto planetary surfaces. The development of the centrifuge technique has been pioneered by the present investigator and is used to provide experimental data for actual target materials of interest. With both powder and gas guns mounted on a rotor arm, it is possible to match various dimensionless similarity parameters, which have been shown to govern the behavior of large scale impacts. Current work is directed toward the determination of scaling estimates for nonporous targets. The results are presented in summary form.

Schmidt, Robert M.↗

Small-scale impacts into rock - An evaluation of the effects of target temperature on experimental results

A series of cratering and catastrophic fragmentation experiments has been performed, involving the impact of aluminum and stainless-steel spheres into warm (about 298 K) and cold (about 100 K) granodiorite targets. Although some vague hints of a thermal effect might be found in some of the results, in no case was there a substantial difference between the warm and cold series. Since these experiments were well within the strength-dominated regime of impact phenomena, variations due to low target temperatures in more energetic events will probably be negligible. Thus, there appear to be no significant temperature-dependent mechanical effects during impact into solid rock over a wide range of temperatures prevalent in the solar system.

Smrekar, S.↗

The evolution of the spatial structure of thick-target hard X-ray emission in solar flares

The spatial distribution of hard X-ray bremsstrahlung emission from an electron-heated target is examined, using a self-consistent calculation of the hydrodynamic response of the atmosphere to heating by the electrons to compute the density-height structure of the target atmosphere at various times. In this way the temporal evolution of the hard X-ray spatial structure at various photon energies is predicted. These results are compared with existing observations from the SMM Hard X-Ray Imaging Spectrometer to give a prognosis for the type of structure to be expected at the subarcsec resolution planned for future instrumentation.

Emslie, A. G.↗

Comparing host and target environments for distributed Ada programs

The Ada programming language provides a means of specifying logical concurrency by using multitasking. Extending the Ada multitasking concurrency mechanism into a physically concurrent distributed environment which imposes its own requirements can lead to incompatibilities. These problems are discussed. Using distributed Ada for a target system may be appropriate, but when using the Ada language in a host environment, a multiprocessing model may be more suitable than retargeting an Ada compiler for the distributed environment. The tradeoffs between multitasking on distributed targets and multiprocessing on distributed hosts are discussed. Comparisons of the multitasking and multiprocessing models indicate different areas of application.

Paulk, Mark C.↗