Search NASA⌕ Search

SEARCH · Search NASA

Results for “THORIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

In-situ measurements of lunar heat flow

During the Apollo program two successful heat flow measurements were made in situ on the lunar surface. At the Apollo 15 site a value of .0000031 W/sq cm was measured, and at the Apollo 17 site a value of .0000022 W/sq cm was determined. Both measurements have uncertainty limits of + or - 20 percent and have been corrected for perturbing topographic effects. The apparent difference between the observations may correlate with observed variations in the surface abundance of thorium. Comparison with earlier determinations of heat flow, using the microwave emission spectrum from the moon, gives support to the high gradients and heat flows observed in situ.

Langseth, M. B.↗

Energy and remote sensing

Exploration for uranium, thorium, oil, gas and geothermal activity through remote sensing techniques is considered; satellite monitoring of coal-derived CO2 in the atmosphere, and the remote assessment of strip mining and land restoration are also mentioned. Reference is made to color ratio composites based on Landsat data, which may aid in the detection of uranium deposits, and to computer-enhanced black and white airborne scanning imagery, which may locate geothermal anomalies. Other applications of remote sensing to energy resources management, including mapping of transportation networks and power plant siting, are discussed.

Summers, R. A.↗

Spacecraft-produced neutron fluxes on Skylab

Estimates of neutron fluxes in different energy ranges are reported for the Skylab spacecraft. Detectors composed of uranium, thorium, and bismuth foils with mica as a fission track recorder, as well as boron foils with cellulose acetate as an alpha-particle recorder, were deployed at different positions in the Orbital Workshop. It was found that the Skylab neutron flux was dominated by high energy (greater than 1 MeV) contributions and that there was no significant time variation in the fluxes. Firm upper limits of 7-15 neutrons/sq cm-sec, depending on the detector location in the spacecraft, were established for fluxes above 1 MeV. Below 1 MeV, the neutron fluxes were about an order of magnitude lower. The neutrons are interpreted as originating from the interactions of leakage protons from the radiation belt with the spacecraft.

Quist, T. C.↗

Lunar thermal regime to 300 km

Coupling of the global heat flow, crustal heat source enrichment, thermal conductivity, and temperature in the crust and upper mantle of the moon is examined. A steady-state moon in which conductive heat transfer dominates is assumed. Heat-flow measurements from the Apollo 15 and 17 missions and gamma-ray mapping of thorium conducted by the Apollo 15 and 16 missions provide data for the study of the lunar thermal regime. Temperatures in the range of 1100 to 1600 K are found for the 300-km depth level. In the upper mantle, temperature gradients are in the range of 1.8 to 3.2 K/km.

Keihm, S. J.↗

Computer-generated maps of lunar composition from gamma-ray data

Processing of some of the gamma-ray data obtained by Apollo 15 and 16 has been accomplished by analyzing count rates in three energy bands. The count rate variations in the three energy bands are due in various degrees to thorium, uranium, potassium, iron and titanium. The mapping which results from the gamma-ray count rates has an effective resolution of about two degrees. Regions of high titanium content in certain maria, the low values of iron in a zone of the central equatorial highland and the relatively low value of iron near Archimedes are noted.

Arnold, J. R.↗

Lead isotope studies of mare basalt 70017

Uranium, thorium, and isotopic lead data for components of basalt 70017 are reported, and it is found that the whole rock, pyroxene, and ilmenite points in a concordia diagram plot along a chord intersecting the curve at 3.7 and 4.33 eons. The plagioclase data do not seem to lie on this line. The data for 70017 appear to plot along a distinctly different chord in a concordia diagram than do the data for 75055 and 75035, two other Apollo 17 mare basalts. The lead data are in accord with Sm-Nd results. A 3.7 eon crystallization age for 70017 would be consistent with the same kind of parentless lead that is indicated by previous studies of soils and soil breccias from stations at Taurus-Littrow. The Th/U ratio in ilmenite is 2.2, and the concentrations of these two elements are approximately twice those in pyroxene.

Mattinson, J. M.↗

Core formation, evolution, and convection: A geophysical model

A model is proposed for the formation and evolution of the Earth's core which provides an adequate energy source for maintaining the geodynamo. A modified inhomogeneous accretion model is proposed which leads to initial iron and refractory enrichment at the center of the planet. The probable heat source for melting of the core is the decay of Al. The refractory material is emplaced irregularly in the lowermost mantle with uranium and thorium serving as a long lived heat source. Fluid motions in the core are driven by the differential heating from above and the resulting cyclonic motions may be the source of the geodynamo.

Ruff, L.↗

The origin of KREEP

KREEP is a lunar material having very high concentrations of incompatible elements; its name is an acronym for the incompatibles K, rare-earth elements (REE), and P. Although a few pristine (endogenously igneous) KREEPy samples were returned from the Apollo 15 and 17 sites, most KREEPy samples are polymict breccias. Most models of KREEP petrogenesis have been based on partial melting of a variety of sources. Such models fail to explain the veritable absence of variations in incompatible element patterns over the sampled portion of the moon. We have defined a KREEP component based on the average composition of Apollo 14 breccias having extremely high concentrations of incompatible elements. Normalization of accurate incompatible data for KREEPy samples from the Apollo 12, 14, 15, 16, and 17 sites to this component virtually always shows no resolvable fractionation (e.g., <10% variation in the La/Lu ratio), whereas partial melting models typically produce larger fractionations (±20–25% in La/Lu) from a factor of 2 difference in degree of partial melting. Required is a single major source that could provide KREEP to widely separated locations on the nearside of the moon. The anorthositic crust of the moon is commonly attributed to the flotation of plagioclase on a deep, moon-wide magma ocean. Fractional crystallization of this magma ocean would have produced large enrichments of incompatibles in a residual liquid. No other plausible major source of incompatibles has been proposed. We borrow the German prefix ur—meaning primeval and designate this residual liquid ‘urKREEP.’ We propose that all KREEPy rocks originated by dilution of urKREEP with crustal or mantle materials during assimilation, or zone-refining (pristine samples), or impact-induced brecciation (breccias and melt rocks). The formation of urKREEP cannot be dated precisely. Correction of breccia Rb-Sr model ages for Rb loss or gain during the early intense bombardments yields ages that cluster in the range 4.4–4.5 Gy. This implies that crystallization of the magma ocean was essentially complete at this time and is in general agreement with U-Pb evidence indicating crustal formation at 4.4 Gy. Assuming that the moon had the composition of an H-group chondrite depleted in Fe-Ni and FeS and that half the incompatibles fractionated into materials other than urKREEP, the thickness of a moon-wide urKREEP layer was <2 km. Thorium concentrations determined by gamma ray spectroscopy indicate that about 4% of the incompatibles in an H chondritic moon are now in the outermost kilometer.

Paul H. Warren↗

Lead isotope systematics of mare basalt 75075

Uranium, thorium and isotopic lead data are reported for two bulk samples and separated pyroxene, ilmenite and plagioclase from basalt 75075. In a concordia diagram the whole rock, ilmenite and four pyroxene samples define a chord intersecting the concordia curve at approximately 4.25 and 2.8 AE. Three plagioclase samples plot distinctly off the chord. The crystallization age of 75075 is accurately determined at 3.74 AE by Rb-Sr, Sm-Nd and K-Ar measurements from other laboratories. It is not possible to adjust the isotopic composition of initial lead so as to reconcile the U-Pb data with a crystallization age of 3.74 AE. The data therefore indicate some type of post-crystallization disturbance of the U-Pb system that is not detected by the other systems. The 75075 data are one of the few examples of this type of age pattern found on the moon. If the disturbance was a single event, it probably occurred around 2.8 AE ago, the time indicated by the pyroxene, whole rock and ilmenite data.

Chen, J. H.↗

Gravitational and radiative effects on the escape of helium from the moon

On the moon, and probably on Mercury and other similar regolith-covered bodies with tenuous atmosphere, the dominant gas is He-4. It arises as the radiogenic product of the decay of uranium and thorium within any planet, but its major source appears to be the alpha particle flux of the solar wind. The moon intercepts solar wind helium at an average rate of 1.1 times 10 to the 24th atom/sec, and loses it at the same rate. Some helium may escape directly as the result of the process of solar wind soil bombardment which may release previously trapped helium at superthermal speeds. Atmospheric models have been calculated with the total helium influx as source. Subsequent comparison of model and measured helium concentrations indicates that the fraction of helium escaping via the atmosphere may range from 20% to 100% of the solar wind influx. Of the escaping atmosphere, most of the helium (about 93%) becomes trapped in earth orbit, while about 5% gets trapped in satellite orbits about the moon. Owing to a 6 month lifetime for helium in solar radiation, the satellite atoms form a lunar corona that exceeds the lunar atmosphere in total abundance by a factor of 4 to 5.

Hodges, R. R., Jr.↗

Commercial use of materials processing in space

The paper examines the scientific and commercial aspects of Materials Processing in the Space program. The elimination of gravity driven convection in molten materials can preclude undesirable stirring and mixing during crystal growth, and improve the casting of alloys and composites, chemical reactions, and the separation of biological materials. The elimination of hydrostatic pressure will allow alloy heat-treatment without distortion and growth of heavy crystals, such as thorium oxide, and containerless processing of liquids and molten materials. On the other hand, more sophisticated process control and diagnostic methods in sample preparation and temperature control must be developed, concluding that space made products of commercial interest are likely to be low volume, high value items.

Zoller, L. K.↗

Lead isotope systematics of three Apollo 17 mare basalts

The paper deals with new and more accurate determinations of uranium, thorium, and isotopic lead data for five bulk samples and separate pyroxene, ilmenite, and plagioclase from basalt 71055. In a concordia diagram, the samples suggest a postcrystallization disturbance of the U-Pb systems of the rock. There is no compelling reason, from U-Pb data, to believe that the moon is younger than 4.55 AE.

Tilton, G. R.↗

Core formation, evolution, and convection - A geophysical model

A model for the formation and evolution of the earth's core, which provides an adequate energy source for maintaining the geodynamo, is proposed. A modified inhomogeneous accretion model is proposed which leads to initial iron and refractory enrichment at the center of the planet. The probable heat source for melting of the core is the decay of Al-26. The refractory material is emplaced irregularly in the lowermost mantle with uranium and thorium serving as a long-lived heat source. Fluid motions in the core are driven by the differential heating from above and the resulting cyclonic motions may be the source of the geodynamo.

Ruff, L.↗

Deposition and dose from the 18 May 1980 eruption of Mount St. Helens

The downwind deposition and radiation doses was calculated for the tropospheric part of the ash cloud from the May 18, 1980 eruption of Mount St. Helens, by using a large cloud diffusion model. The naturally occurring radionnuclides of radium and thorium, whose radon daughters normally seep very slowly from the rocks and soil, were violently released to the atmosphere. The largest dose to an individual from these nuclides is small, but the population dose to those affected by the radioactivity in the ash is about 100 person rem. This population dose from Mount St. Helens is much greater than the annual person rem routinely released by a typical large nuclear power plant. It is estimated that subsequent eruptions of Mount St. Helens have doubled or tripled the person rem calculated from the initial large eruption. The long range global ash deposition of the May 18 eruption is estimated through 1984, by use of a global deposition model. The maximum deposition is nearly 1000 kg square km and occurs in the spring of 1981 over middle latitudes of the Northern Hemisphere.

Peterson, K. R.↗

The intercrater plains of Mercury and the Moon: Their nature, origin and role in terrestrial planet evolution. Alternative thermal histories

Interpretations supporting a differentiated, once active Mercury are listed. Alternative scenarios of the planet's thermal history involve: different distributions of accreted materials, including uranium and thorium-rich materials; variations of early melting; and different modes of plains and scarp formation. Arguments are advanced which strongly favor plains formation by volcanism, lack of a primordial surface, and possible identification of remnant tensional features. Studies of remotely sensed data which strongly suggest a modestly homogeneous surface of silicates imply core separation. Reasons for accepting or rejecting various hypotheses for thermal histories of the planet are mentioned.

Leake, M. A.↗

Heat pipes containing alkali metal working fluid

A technique for improving high temperature evaporation-condensation heat-transfer devices which have important and unique advantage in terrestrial and space energy processing is described. The device is in the form of a heat pipe comprising a sealed container or envelope which contains a capillary wick. The temperature of one end of the heat pipe is raised by the input of heat from an external heat source which is extremely hot and corrosive. A working fluid of a corrosive alkali metal, such as lithium, sodium, or potassium transfers this heat to a heat receiver remote from the heat source. The container and wick are fabricated from a superalloy containing a small percentage of a corrosion inhibiting or gettering element. Lanthanum, scandium, yttrium, thorium, and hafnium are utilized as the alloying metal.

Morris, J. F.↗

Evaluation of GOES encoder lamps

Aging characteristics and life expectancies of flight quality, tungsten filament, encoder lamps are similar to those of 'commercial' grade gas filled lamps of similar construction, filament material and filament temperature. The aging and final failure by filament burnout are caused by single crystal growth over large portions of the filament with the concomitant development of facets and notches resulting in reduction of cross section and mechanical weakening of the filament. The life expectancy of presently produced lamps is about one year at their nominal operating voltage of five volts dc. At 4.5 volts, it is about two years. These life times are considerably shorter, and the degradation rates of lamp current and light flux are considerably higher, than were observed in the laboratory and in orbit on lamps of the same type manufactured more than a decade ago. It is speculated that the filaments of these earlier lamps contained a crystallization retarding dopant, possibly thorium oxide. To obtain the desired life expectancy of or = to four years in present lamps, operating voltages of or = to four volts dc would be required.

Viehmann, W.↗

Phenomenology of plasma engine cathodes at high current rates and low pressures

The effects of low surrounding pressures on cathodes of arc jet engines with electromagnetic acceleration are investigated for pressure and current energies of 20 to 100 Torr. and 400 to 1000 A. Experiments with 50 mm long and 8 mm diameter tungsten-thorium cathode in a coaxial gas flow show that pre-heating of the cathode reduces the duration of the instable arc discharge and thus material loss. The use of lighter gases also reduces instability effects, as well as the use of increased pressures and a massive gas influx.

Huegel, H.↗