Search NASA⌕ Search

SEARCH · Search NASA

Results for “TITRATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

A Photoresponsive Receptor with a 10 5 Magnitude of Reversible Anion-Binding Switching

In a leap toward anion separation that uses only energy input for binding and release cycles, we report herein a new class of photoswitchable anion receptors featuring a diiminoguanidinium functionality that displays a change of more than five orders of magnitude in switched-off binding strength towards sulfate, a representative oxyanion, upon photoirradiation with UV light. Additionally, the (E,E)-2-pyridyl-diiminoguanidinium cation, synthesized as the triflate salt, binds sulfate with extraordinary strength in [D6]DMSO owing to its bidentate guanidinium hydrogen bonding, which can chelate the O-S-O edge of sulfate. Upon photoisomerization to the Z,Z isomer, the anion-binding site is essentially shut off by intramolecular hydrogen bonds to the 2-pyridyl substituents, as shown by anion-binding titrations, theoretical calculations, and X-ray structural analysis. This approach will allow the development of advanced anion-separation cycles that use only energy input and generate no chemical waste, and thus address challenging chemical separation problems in a more sustainable way.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solvent Acts as the Referee in a Match‐Up Between Charged and Preorganized Receptors

The prevalence of anion-cation contacts in biomolecular recognition under aqueous conditions suggests that ionic interactions should dominate the binding of anions in solvents across both high and low polarities. Investigations of this idea using titrations in low polarity solvents are impaired by interferences from ion pairing that prevent a clear picture of binding. To address this limitation and test the impact of ion-ion interactions across multiple solvents, we quantified chloride binding to a cationic receptor after accounting for ion pairing. In these studies, we created a chelate receptor using aryl-triazole CH donors and a quinolinium unit that directs its cationic methyl inside the binding pocket. In low-polarity dichloromethane, the 1 : 1 complex (log K 1 : 1 ~ 7.3) is more stable than neutral chelates, but fortuitously comparable to a preorganized macrocycle (log K 1 : 1 ~ 6.9). Polar acetonitrile and DMSO diminish stabilities of the charged receptor (log K 1 : 1 ~ 3.7 and 1.9) but surprisingly 100-fold more than the macrocycle. While both receptors lose stability by dielectric screening of electrostatic stability, the cationic receptor also pays additional costs of organization. Thus even though the charged receptor has stronger binding in apolar solvents, the uncharged receptor has more anion affinity in polar solvents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pyrrole‐Imine Macrocycle: Self‐Organizing Cross‐Reactive Anion Receptor and Sensor

Self-organizing macrocyclic receptor-sensors for phosphorus oxyanions, phosphates, and phosphonates comprising imine moieties were prepared by condensation of dipyrrolylmethane dicarbaldehyde with diethylene triamine. The incorporation of flexible ethylene moieties endows the macrocycle with unprecedented flexibility and ability to accommodate numerous phosphorus oxyanions from orthophosphate to large anions such as ATP or phosphonate glyphosate. The anion binding was elucidated by NMR titrations, low-temperature NMR, and NOESY NMR. The incorporation of dansyl fluorophore enables sensing of anions using the fluorescence signal, whereas the changes in fluorescence intensity, width of the fluorescence band, and position of the maxima are analyte-specific and useful in recognition and identification of eleven different P-oxyanions in water. The affinity (K assoc ) for Na + salts was H 2 PO 4 − ≈ Methylphosphonate > H 2 P 2 O 7 2− > Phenylphosphonate- > Glyphosate 2− > AMP 2− > ADP 2− > ATP 2− . Interestingly, phosphonates, including methylphosphonate and glyphosate anions, were also found to display a strong affinity (K assoc ∼10 6 M −1 ) while halides, nitrate, carbonates, or hydrogen sulfate did not show a significant affinity. The determined fluorescence spectral parameters were used to classify the 12 analytes (11 anions and water) using Linear Discriminant Analysis (LDA). Quantification was performed using LDA and Support Vector Machine (SVM), and the phosphonate concentrations in unknown samples were determined with an error of 3.5% or lower.

anions↗

A Woven Supramolecular Metal‐Organic Framework Comprising a Ruthenium Bis(terpyridine) Complex and Cucurbit[8]uril: Enhanced Catalytic Activity toward Alcohol Oxidation

Abstract The self‐assembly of a diamondoid woven supramolecular metal–organic framework wSMOF‐1 has been achieved from intertwined [Ru(tpy) 2 ] 2+ (tpy=2,2′,6′,2′′‐terpyridine) complex M1 and cucurbit[8]uril (CB[8]) in water, where the intermolecular dimers formed by the appended aromatic arms of M1 are encapsulated in CB[8]. wSMOF‐1 exhibits ordered pore periodicity in both water and the solid state, as confirmed by a combination of 1 H NMR spectroscopy, UV‐vis absorption, isothermal titration calorimetry, dynamic light scattering, small angle X‐ray scattering and selected area electron diffraction experiments. The woven framework has a pore aperture of 2.1 nm, which allows for the free access of both secondary and primary alcohols and tert ‐butyl hydroperoxide (TBHP). Compared with the control molecule [Ru(tpy) 2 ]Cl 2 , the [Ru(tpy) 2 ] 2+ unit of wSMOF‐1 exhibits a remarkably higher heterogeneous catalysis activity for the oxidation of alcohols by TBHP in n ‐hexane. For the oxidation of 1‐phenylethan‐1‐ol, the yield of acetophenone was increased from 10 % to 95 %.

Zhang, Yun‐Chang↗

Combining the Best of Two Chelating Titans: A Hydroxypyridinone-Decorated Macrocyclic Ligand for Efficient and Concomitant Complexation and Sensitized Luminescence of f-Elements

An ideal chelator for f-elements features rapid kinetics of complexation, high thermodynamic stability, and slow kinetics of dissociation. Here we present the facile synthesis of a macrocyclic ligand bearing four 1-hydroxy-2-pyridinone units linked to a cyclen scaffold that rapidly forms thermodynamically stable complexes with lanthanides (Sm 3+ , Eu 3+ , Tb 3+ , Dy 3+ ) and a representative late actinide (Cm 3+ ) in aqueous media and concurrently sensitizes them. Extended X-ray absorption fine structure (EXAFS) spectroscopy revealed an increase in the Ln/An-O bond lengths following the trend Cm>Eu>Tb and EXAFS data were compatible with time-resolved luminescence studies, which indicated one to two water molecules in the inner metal coordination sphere of Eu(III) and two water molecules for the Cm(III) complex. Spectrofluorimetric ligand competition titrations against DTPA confirmed the high thermodynamic stability of DOTHOPO complexes, with pM values between 19.9(1) and 21.9(2).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Inclusion Complexes of a Metastable‐State Photoacid with High Acidity and Chemical Stability

Abstract Metastable‐state merocyanine photoacids (MCHs) have been widely applied to various chemical, material and biomedical areas to drive or control chemical processes with light. In this work, stoichiometry and association constants have been determined for inclusion complexes of a photoacid MCH1 ((E)‐3‐(2‐(2‐hydroxystyryl)‐3,3‐dimethyl‐3H‐indol‐1‐ium‐1‐yl)propane‐1‐sulfonate) withβ‐cyclodextrin (β‐CD), 2‐hydroxypropyl‐β‐CD (HP‐β‐CD),γ‐CD and HP‐γ‐CD by means of UV‐Vis absorption spectroscopic titrations. The inclusion complexes were studied to enhance acidity and chemical stability. Kinetic study showed that CDs stabilized the acidic metastable state and slowed its thermal relaxation. The acidity of the ground and metastable state (pK a GS and pK a MS ) increased upon addition of CDs. The pK a MS of [MCH1 ⋅ (γ‐CD) 2 ] is as low as 0.92 in comparison with 2.24 for MCH1, which is close to the lowest pK a MS values (1.20 and 1.03) reported previously, in which case the MCH1 was structurally modified with alkylammonium side chains. Addition of CDs also significantly enhanced the chemical stability of MCH1 against hydrolysis, which is one of the major concerns for the application of MCHs. In particular, the addition of HP‐β‐CD increased the half‐life of MCH1 in aqueous solution more than four‐fold. Moreover, the quantum chemical calculations confirmed the stoichiometry and analyzed the binding sites and hydrogen bonds of the inclusion complexes.

Chemistry↗

Quantitative Low-Field 19 F Nuclear Magnetic Resonance Analysis of Carbonyl Groups in Pyrolysis Oils

Pyrolysis bio-oils, one of the products of lignocellulosic biomass pyrolysis, have the potential to be widely used as fuels. The chemical composition of bio-oils is very complicated as they contain hundreds, if not thousands, of different, mostly oxygen-containing, compounds with a wide distribution of physical properties, chemical structures, and concentrations. Detailed knowledge of bio-oil composition is crucial for optimizing both the pyrolysis processes and for any subsequent upgrading into a more viable fuel resource. Here we report the successful use of low-field, or benchtop, nuclear magnetic resonance (NMR) spectrometers in the analysis of pyrolysis oils. Pyrolysis oils from four different feedstocks were derivatized and analyzed using 19 F NMR techniques. The NMR results compare favorably with titrations for total carbonyl content. In addition, the benchtop NMR spectrometer proves able to reveal key spectral features, thus allowing the quantification of different carbonyl groups, such as aldehydes, ketones and quinones. Benchtop NMR spectrometers are typically compact, cheaper than their superconducting counterparts and do not require cryogens. Their use will make NMR analysis of pyrolysis oils easier and more accessible to a wide range of different potential users.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Efficient Cp*Ir Catalysts with Imidazoline Ligands for CO 2 Hydrogenation: Cp*Ir Catalysts with Imidazoline Ligands for CO 2 Hydrogenation

Here, we report newly developed iridium catalysts with electron-donating imidazoline moieties as ligands for the hydrogenation of CO 2 to formate in aqueous solution. Interestingly, these new complexes promote CO 2 hydrogenation much more effectively than their imidazole analogues and exhibit a turnover frequency (TOF) of 1290 h –1 for the bisimidazoline complex compared to that of 20 h –1 for the bisimidazole complex at 1 MPa and 50 °C. Additionally, the hydrogenation proceeds smoothly even under atmospheric pressure at room temperature. The TOF of 43 h –1 for the bisimidazoline complex is comparable to that of a dinuclear complex (70 h –1 , highest TOF reported) [Nat. Chem. 2012, 4, 383], which incorporates proton-responsive ligands with pendent-OH groups in the second coordination sphere. The catalytic activity of the complex with an N-methylated imidazoline moiety is much the same as that of the corresponding pyridylimidazoline analogue. Our result and the UV/Vis titrations of the imidazoline complexes indicate that the high activity is not attributable to the deprotonation of NH on the imidazoline under the reaction conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Nature of the Technetium Species Formed During the Oxidation of Technetium Dioxide with Oxygen and Water

The oxidation of TcO 2 with O 2 in the presence of H 2 O at 250 °C was investigated; Tc 2 O 7 and a red product were observed after the reaction. UV/Visible spectroscopy and a cerium titration on the “red” product are consistent with the presence of a reduced Tc species. It is proposed that the “red” product was formed by the hydrolysis of Tc 2 O 7 to HTcO 4 followed by the reduction of HTcO 4 . The reaction products of TcO 2 with O 2 /H 2 O at 250 °C were also studied by mass spectrometry. The main dinuclear species were Tc 2 O 7 and Tc 2 O 5 , while the main mononuclear species were TcO 3 and HTcO 4 . The compound HTcO 4 and associated hydrates were simulated to identify candidate structures for the “red” product; however, neither the acid nor any related hydrates exhibited the UV/Visible signature of the “red” product.

Childs, Bradley C.↗

Quorum‐dependent transfer of the opine‐catabolic plasmid pAoF 64/95 is regulated by a novel mechanism involving inhibition of the TraR antiactivator TraM

Abstract We previously described a plasmid of Agrobacterium spp ., pAoF 64/95, in which the quorum‐sensing system that controls conjugative transfer is induced by the opine mannopine. We also showed that the quorum‐sensing regulators TraR, TraM, and TraI function similarly to their counterparts in other rep ABC plasmids. However, traR , unlike its counterpart on Ti plasmids, is monocistronic and not located in an operon that is inducible by the conjugative opine. Here, we report that both traR and traM are expressed constitutively and not regulated by growth with mannopine. We report two additional regulatory genes, mrtR and tmsP , that are involved in a novel mechanism of control of TraR activity. Both genes are located in the distantly linked region of pAoF 64/95 encoding mannopine utilization. MrtR, in the absence of mannopine, represses the four‐gene mocC operon as well as tmsP , which is the distal gene of the eight‐gene motA operon. As judged by a bacterial two‐hybrid analysis, TmsP, which shows amino acid sequence relatedness with the TraM‐binding domain of TraR, interacts with the antiactivator. We propose a model in which mannopine, acting through the repressor MrtR, induces expression of TmsP which then titrates the levels of TraM thereby freeing TraR to activate the tra regulon.

59 BASIC BIOLOGICAL SCIENCES↗

Thermal Stability of a Eutectic Mixture of Bis(2,2-dinitropropyl) Acetal and Formal: Part C. Kinetic Compensation Effect

Here, the aging behavior of a eutectic mixture of bis(2,2-dinitropropyl) acetal and formal [called NP here] has been studied in various atmospheres [dry (air or nitrogen) versus wet] at temperatures 70 °C and below. The properties of aged samples were analyzed using Fourier transform infrared (FTIR) spectroscopy, Karl Fischer (KF) titration, liquid chromatography/mass spectrometry (LC/MS), and thermogravimetric analysis (TGA) over a period of three years. The results indicate that at aging temperatures up to 55 °C, the initial rates of water production from nitrous acid (HONO) formation and decomposition into the water, NO, and NO 2 follows a 1st order rate law and the rate constants follow an Arrhenius law as a function of temperature. The activation energies and pre-factors for water and volatiles production yield a single linear kinetic compensation plot, suggesting a common degradation pathway between NP and the various combinations of its constituents. Within a narrow temperature range, around 55 °C, a trace amount of water in NP stabilizes its properties by preventing HONO elimination. When the aging temperature is substantially higher than 55 °C, the nature of the degradation mechanism changes. It is suspected that the degradation products of NO x , water, and HNO 3 serve as catalysts to auto-catalyze (kinetics beyond the 1st order) and further degrade NP. The effect of headspace volume on this auto-catalytic process will be discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structures of the Neisseria meningitides methionine-binding protein MetQ in substrate-free form and bound to l - and d -methionine isomers

The bacterial periplasmic methionine-binding protein MetQ is involved in the import of methionine by the cognate MetNI methionine ATP binding cassette (ABC) transporter. The MetNIQ system is one of the few members of the ABC importer family that has been structurally characterized in multiple conformational states. Critical missing elements in the structural analysis of MetNIQ are the structure of the substrate-free form of MetQ, and detailing how MetQ binds multiple methionine derivatives, including both l- and d-methionine isomers. In this study, we report the structures of the Neisseria meningitides MetQ in substrate-free form and in complexes with l-methionine and with d-methionine, along with the associated binding constants determined by isothermal titration calorimetry. Structures of the substrate-free (N238A) and substrate-bound N. meningitides MetQ are related by a “Venus-fly trap” hinge-type movement of the two domains accompanying methionine binding and dissociation. l- and d-methionine bind to the same site on MetQ, and this study emphasizes the important role of asparagine 238 in ligand binding and affinity. A thermodynamic analysis demonstrates that ligand-free MetQ associates with the ATP-bound form of MetNI ~40 times more tightly than does liganded MetQ, consistent with the necessity of dissociating methionine from MetQ for transport to occur.

59 BASIC BIOLOGICAL SCIENCES↗

Structural and biochemical analysis of the metallo-β-lactamase L1 from emerging pathogen Stenotrophomonas maltophilia revealed the subtle but distinct di-metal scaffold for catalytic activity

Emergence of Enterobacteriaceae harboring metallo-beta-lactamases (MBL) has raised global threats due to their broad antibiotic resistance profiles and the lack of effective inhibitors against them. We have been studied one of the emerging environmental MBL, the L1 from Stenotrophomonas maltophilia K279a . We determined several crystal structures of L1 complexes with three different classes of beta-lactam antibiotics (penicillin G, moxalactam, meropenem, and imipenem), with the inhibitor captopril and different metal ions (Zn +2 , Cd +2 , and Cu +2 ). All hydrolyzed antibiotics and the inhibitor were found binding to two Zn +2 ions mainly through the opened lactam ring and some hydrophobic interactions with the binding pocket atoms. Without a metal ion, the active site is very similarly maintained as that of the native form with two Zn +2 ions, however, the protein does not bind the substrate moxalactam. When two Zn +2 ions were replaced with other metal ions, the same di-metal scaffold was maintained and the added moxalactam was found hydrolyzed in the active site. Differential scanning fluorimetry and isothermal titration calorimetry were used to study thermodynamic properties of L1 MBL compared with New Deli Metallo-beta-lactamase-1 (NDM-1). Both enzymes are significantly stabilized by Zn +2 and other divalent metals but showed different dependency. These studies also suggest that moxalactam and its hydrolyzed form may bind and dissociate with different kinetic modes with or without Zn +2 for each of L1 and NDM-1. Our analysis implicates metal ions, in forming a distinct di-metal scaffold, which is central to the enzyme stability, promiscuous substrate binding and versatile catalytic activity. Statement: The L1 metallo-beta-lactamase from an environmental multidrug-resistant opportunistic pathogen Stenotrophomonas maltophilia K279a has been studied by determining 3D structures of L1 enzyme in the complexes with several beta-lactam antibiotics and different divalent metals and characterizing its biochemical and ligand binding properties. We found that the two-metal center in the active site is critical in the enzymatic process including antibiotics recognition and binding, which explains the enzyme's activity toward diverse antibiotic substrates. This study provides the critical information for understanding the ligand recognition and for advanced drug development.

59 BASIC BIOLOGICAL SCIENCES↗

Moisture ingress in commercial steel drums: Water content determination, diffusion modelling and predicted permeation rates

Commercial steel drums underpin the global economy, playing a pivotal role in the storage and transportation of critical materials. Transported and stored materials, such as food, chemical and nuclear waste, can be sensitive to ambient conditions, particularly moisture that can enhance negative effects such as corrosion and material degradation. Although international standards and regulations are in place for the qualification of steel drums, there are no current testing requirements, established limits or boundaries for the permeation of moisture into the drums during transportation or storage. This work aims to provide insights into the moisture ingress over time into properly sealed steel drums and provides estimated moisture ingress rates over time through extrapolation. Water vapour transmission rate (WVTR) measurements through the gasket material at 10–40°C were 0.11–2.1 g/m 2 /day resulting in a permeation activation energy of 30.2 kJ/mol. Water sorption measurements and Karl Fischer titration (KFT) on ethylene propylene diene monomer (EPDM) gasket material revealed a decrease in equilibrium moisture saturation with increasing temperature. KFT measurements also revealed the presence of moisture within the adhesive and drum wall after exposure to ambient conditions. KFT and Fourier transform infrared spectroscopy (FTIR) show that moisture will desorb from the EPDM and drum wall after exposure to desiccating conditions, although a minimal amount of moisture will remain present. When sealed to the manufacturer's recommendations, the steel drums are effective in minimizing moisture ingress. In conclusion, in sealed empty drums, moisture ingress rates for 19-L drums were 0.4–1.5 mg/day at 25°C 15% relative humidity (RH) and increased to 7.1–8.8 mg/day at 40°C 90% RH, and moisture ingress rates for 210-L drums were 2.5 and 3.5 mg/day at field deployment conditions of 15.5°C 51.5% RH and 23°C 40% RH, respectively.

42 ENGINEERING↗

Thiacalix[4]arene Derivatives Bearing Imidazole Units: A Ditopic Hard/Soft Receptor for Na + and K + /Ag + with an Allosteric Effect and a Reusable Extractant for Dichromate Anions

Two novel receptors 5,11,17,23-tetra-tert-butyl-25,27-bis[(ethoxycarbonyl)methoxy]-26,28-bis-[1-methyl-(imidazole)meth-oxy]-2,8,14,20-tetra-thiacalix[4]arene ( L1 ) and 5,11,17,23-tetra-tert-butyl-25,27-bis-[(benzyl)methoxy]-26,28-bis-[1-methyl-(imidazole)-methoxy]-2,8,14,20-tetrathiacalix[4]arene ( L2 ) possessing imidazole moieties based on thiacalix[4]arene in the 1,3-alternate conformation have been synthesized and characterized. The crystal structures of L1 and L2 have been determined. The binding behaviour towards Li + , Na + , K + and Ag + ions has been examined by 1H NMR titration experiments in (CDCl 3 /CD 3 CN; 10:1, v/v) solution. The exclusive formation of mononuclear complexes of L1 with metal cations is of particular interest revealing a negative allosteric effect in the thiacalix[4]arene family. Liquid-liquid extraction experiments indicate that synthesized L2 can be utilized as an efficient reusable extractant for dichromate anion by controlling the pH of the aqueous solution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ion Exchange Processes for CO 2 Mineralization Using Industrial Waste Streams: Pilot Plant Demonstration and Life Cycle Assessment

Abstract An attractive technique for removing CO 2 from the environment is sequestration within stable carbonate solids (e. g., calcite). However, continuous addition of alkalinity is required to achieve favorable conditions for carbonate precipitation (pH>8) from aqueous streams containing dissolved CO 2 (pH<4.5) and Ca 2+ ions. In this study, a pH‐swing process using ion exchange was demonstrated to process 300 L of produced water brine per day for CO 2 mineralization. Proton titration capacities were quantified for aqueous streams in equilibrium with gas streams at various concentrations of CO 2 (pCO 2 =0.03–0.20 atm) and at various flow rates (0.5–2.0 L min −1 ). Energy intensities for the process were determined to be between 30 and 65 kWh per tonne of CO 2 sequestered depending on the composition of the brine stream. A life cycle assessment was performed to analyze the net carbon emissions of the technology which indicated a net CO 2 reduction for pCO 2 ≥0.12 atm (−0.06–−0.39 kg CO 2 e per kg precipitated CaCO 3 ) utilizing calcium‐rich brines. The results from this study indicate the ion exchange process can be used as a scalable method to provide alkalinity necessary for the capture and storage of CO 2 in Ca‐rich waste streams.

Chemistry↗

Ionic Liquid–Directed Nanoporous TiNb 2 O 7 Anodes with Superior Performance for Fast–Rechargeable Lithium–Ion Batteries

Nanoporous TiNb 2 O 7 (NPTNO) material is synthesized by a sol–gel method with an ionic liquid (IL) as the nanoporous structure directing template. NPTNO exhibits a high reversible capacity of 210 mAh g –1 even at the charging rate of 50 C and an excellent cyclability of half-cell capacity retention of 74% for 1000 cycles at 5 C and LiNi 0.5 Mn 1.5 O 4 -coupled full-cell capacity retentions of 81% and 87% for 1000 cycles at 1 C and 2 C, respectively. The studies of the 1000 cycled NPTNO electrode illustrate that the IL-directed mesoporous structure can enhance the cyclability of NPTNO cells due to the alleviation of repetitive mechanical stress and volume fluctuation induced by the repetitive Li + insertion-extraction processes. The measured Li + diffusion coefficients from the galvanostatic intermittent titration technique suggest that the IL-templating strategy indeed ensures the fast rechargeability of NPTNO cells based on the fast Li + diffusion kinetics. Benefitting from the nanoporous structure, NPTNO with unhindered Li + diffusion pathways achieves a superior rate capability in the titanium-based oxide materials and the best full-cell cyclability in the TNO materials. Furthermore, the templating potential of IL is demonstrated, and the superb electrochemical performance establishes the IL-directed NPTNO as a promising anode candidate for fast-rechargeable LIBs.

25 ENERGY STORAGE↗

Monitoring the State-of-Charge of a Vanadium Redox Flow Battery with the Acoustic Attenuation Coefficient: An In Operando Noninvasive Method

Redox flow battery technology has been increasingly recognized as a promising option for large-scale grid energy storage. Access to high-fidelity information on the health status of the electrolyte, including the state-of-charge (SOC), is vital to maintaining optimal and economical battery operation. In this study, an ultrasonic probing cell that can be used to measure SOC in real time is designed. This unprecedented, new measurement approach overcomes the influence of varying temperatures by measuring the acoustic attenuation coefficient of the redox flow battery electrolyte online and noninvasively. The new approach is used to estimate the SOC of a vanadium redox flow battery (VRFB) in operando from measured acoustic properties. The accuracy of the SOC estimated from the acoustic properties is validated against SOC calculated by the titration method. The results show that the acoustic attenuation coefficient is a robust parameter for SOC monitoring, with a maximum error of 4.8% and extremely low sensitivity to temperature, while sound speed appears to be less accurate in the benchmark-inference method, with a maximum error of 22.5% and high sensitivity to temperature. The acoustic measurement approach has great potential for inexpensive real-time SOC monitoring of redox flow battery operations.

25 ENERGY STORAGE↗