Search NASA⌕ Search

SEARCH · Search NASA

Results for “TURBULENCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS2018

Verifying Implementation of the Dryden Turbulence Model and MIL-F-8785 Gust Gradient

Turbulence modeling in human-in-the-loop simulation is important to assessing aircraft handling qualities and pilot performance and to provide additional realism for pilot training. In the simulation community, the Dryden turbulence spectra is a popular choice for modeling the linear turbulent gusts because its rational form is efficiently reproduced by passing white noise through linear filters. The MIL-F-8785 gust gradients similarly use additional linear filters to model the gradient of the turbulent gust over the wing, and it represents the gust gradients as perturbations to the air-relative rotational rates. The Cockpit Motion Facility at NASA Langley Research Center (LaRC) models continuous random turbulence using the Dryden one-dimensional spectra and MIL-F-8785 gust gradient. The facility recently reviewed and updated its verification of these models as part of an initiative to improve motion cueing under turbulence. This exercise introduced improved methods for verifying the turbulence models and led to rediscovery of model assumptions that informed improvements to implementation.

Madden, Michael M.↗
NASA NTRS2018

kL-based Linear and Nonlinear Two-Equation Turbulence Models

The development and implementation of kL-based Reynolds Average Navier-Stokes (RANS) two-equation turbulence models are reported herein. The kL is based on Abdol-Hamid's closure and Menter's modification to Rotta's two-equation model. Rotta shows that a reliable transport equation can be formed from the turbulent length scale L, and the turbulent kinetic energy k. Rotta's kL equation is well suited for term-by-term modeling and displays useful features compared to other scale formulation. One of the important differences is the inclusion of higher order velocity derivatives in the source terms of the scale equation. This can enhance the ability of RANS solvers to simulate unsteady flows in URANS mode. The present report documents the formulation of two model levels of turbulence models as implemented in the computational fluid dynamics FUN3D code. The levels are the two-equation linear k-kL and the two-equation algebraic Reynolds stress model (ARSM). Free shear, separated and corner flow cases are documented and compared with experimental, and other turbulence model data. The results show generally very good comparisons with experimental data. The results from this formulation are similar or better than results using the SST two-equation turbulence model. ARSM shows great promise with similar level of computational resources as basic two-equation turbulence models.

Abdol-Hamid, K. S.↗
NASA NTRS2020

Simulation and Modeling of Cold-Wall Hypersonic Turbulent Boundary Layers on Flat Plate

Direct numerical simulations (DNS) of flat-plate, zero-pressure-gradient turbulent boundary layers are presented for nominal freestream Mach numbers of 11 and 14 and a highly cooled wall (wall-to-recovery temperature of approximately 0.2). The flow conditions of the DNS are representative of the experimental data for a Mach 11.1 turbulent boundary layer on a flat plate that was tested at Calspan–University of Buffalo Research Center (CUBRC) and the operational conditions of the AEDC Hypervelocity Tunnel No. 9 at Mach 14. The wall shear stress and turbulent heat flux predicted by DNS show good comparisons with those measured at CUBRC and those modeled with a Baldwin-Lomax model. The generated DNS database extends the range of Reynolds numbers from those typical of previous DNS studies for hypersonic boundary-layer flows and confirms the validity of Morkovin’s hypothesis within the relatively broader range of Reynolds numbers considered in this study. A priori assessment of turbulent heat flux models with DNS data shows that the algebraic energy flux (AEF) formulation gives better predictions of the streamwise turbulent heat flux than the commonly used constant turbulent Prandtl number model while both models give similarly good predictions of the wall-normal turbulent heat flux. A posteriori assessment shows that the AEF model improves the prediction of the temperature profiles while keeping a good prediction of the velocity field.

Junji Huang↗
NASA NTRS2023

Can the Streaming Instability Form the First Planetesimals in Globally Turbulent Protoplanetary Disks?

Understanding the formation of the first planetesimals remains key to deciphering the history of planet formation within our own solar system and beyond. Evidence from the vast meteorite record [e.g., 1] as well as observations [e.g., 2] strongly suggest that the first planetesimals, and perhaps giant planet core accretion occurred well within the first million years of disk evolution. Moreover, chemical and lithological mixing as well as observations of line-broadening in protoplanetary disks (PPDs) [e.g., 3-6] suggest that the solar system nebula in this epoch was weakly-to-moderately turbulent in the regions where particle growth is of the greatest interest [7-8]. It is a well-known though that global hydrodynamic turbulence complicates particle growth due to a slew of barriers that can slow or even stall particle or aggregate growth at pebble sizes (with corresponding small particle Stokes numbers St) that can lead to loss to the central star via radial drift before planetesimals can ever form [9,10], requiring that some other mechanism come into play that collects growth-frustrated pebbles into gravitationally bound multi-km bodies – objects that are “born big” [11]. The current leading candidate for such a “leap-frog” mechanism is the so-called Streaming Instability (SI), a gas-drag mediated momentum exchange resonance in which the relative velocity between the particle component and a rotating gaseous fluid can lead to high densities in the particle field [12], which has been invoked in a number of recent PPD models that include a turbulent intensity α [e.g., 13-14] as the defacto mechanism for planetesimal formation if conditions for the SI (depending on particle St and the solids-to-gas mass ratio) are satisfied. However, these previous works use conditions established from occurrence studies for the onset of SI in laminar disks [15-17] in which the only source of turbulence is that self-generated by the settling particle layer, and not externally driven global turbulence. Recent analytical theories of the SI subject to global turbulence predict much more stringent conditions for the effectiveness of the SI than the laminar case [18-19]. Thus, whether the efficient operation of the SI can be attained in realistic models of the solar nebula have yet to be established. In this work, we ask whether the conditions under which the SI can produce gravitationally bound particle overdensities can actually be met in the first million years of evolution in globally turbulent PPDs.

P R Estrada↗
NASA NTRS2023

Compressible Turbulence in the Near-Sun Solar Wind Parker Solar Probe's First Eight Perihelia

Many questions remain about the compressibility of solar wind turbulence with respect to its origins and properties. Low plasma beta (ratio of thermal to magnetic pressure) environments allow for the easier generation of compressible turbulence, enabling study of the relationship between density fluctuations and turbulent Mach number. Utilizing Parker Solar Probe plasma data, we examine the normalized proton density fluctuations as a function of turbulent Mach number M t conditioned on plasma beta and cross helicity. With consideration of statistical error in the parameters computed from in situ data, we find a general result consistent with both linear-wave theory and nearly incompressible turbulence in an inhomogeneous background field. We compare observational results conditioned on plasma beta and cross helicity with 3D magnetohydrodynamic simulations and observe rather significant similarities with respect to how those parameters affect the proportionality between density fluctuations and turbulent Mach number. This study further investigates the complexity of compressible turbulence as viewed by the density scaling relationship and may help better understand the compressible environment of the near-Sun solar wind.

Manuel Enrique Cuesta↗
NASA NTRS2019

Evaluation of Full Reynolds Stress Turbulence Models in FUN3D for Axisymmetric Jet Flow

Two full seven-equation turbulence models available in the FUN3D code are evaluated for their ability to improve the computation of challenging mixing flows encountered in aerospace propulsion. These models are the SSG/LRR and Wilcox full second-moment Reynolds stress models. They solve equations for the six components of the Reynolds stress and a seventh equation for the turbulent length scale. Two standard eddy viscosity models are also evaluated for comparison, the Spalart-Allmaras (SA) one-equation model and the Menter Shear Stress Transport (SST-V) two-equation turbulence model. Flow through an axisymmetric reference nozzle is examined at three flow conditions: subsonic unheated, subsonic heated, and near sonic unheated. Centerline profiles of velocity and turbulent kinetic energy and radial profiles of velocity, turbulent kinetic energy and turbulent stresses are examined. Results showed that the SA model did well at predicting the jet potential core length, but over-mixed the downstream flow, whereas the SST-V model over-predicted the potential core length. The Wilcox-model significantly over-predicted the potential core length and under-predicted the mixing and was not well-suited for the jet flows evaluated, however the SSG/LRR Reynolds stress model did well at predicting the mixing rate and mean velocity for all cases examined.

mixing layers↗
NASA NTRS1954

Characteristics of turbulence in a boundary layer with zero pressure gradient

The results of an experimental investigation of a turbulent boundary layer with zero pressure gradient are presented. Measurements with the hot-wire anemometer were made of turbulent energy and turbulent shear stress, probability density and flattening factor of u-fluctuation, spectra of turbulent energy and shear stress, and turbulent dissipation. The importance of the region near the wall and the inadequacy of the concept of local isotropy are demonstrated. Attention is given to the energy balance and the intermittent character of the outer region of the boundary layer. Also several interesting features of the spectral distribution of the turbulent motions are discussed.

FLOW, TURBULENT↗
NASA NTRS2015

Preferrential Concentration of Particles in Protoplanetary Nebula Turbulence

Preferential concentration in turbulence is a process that causes inertial particles to cluster in regions of high strain (in-between high vorticity regions), with specifics depending on their stopping time or Stokes number. This process is thought to be of importance in various problems including cloud droplet formation and aerosol transport in the atmosphere, sprays, and also in the formation of asteroids and comets in protoplanetary nebulae. In protoplanetary nebulae, the initial accretion of primitive bodies from freely-floating particles remains a problematic subject. Traditional growth-by-sticking models encounter a formidable "meter-size barrier" [1] in turbulent nebulae. One scenario that can lead directly from independent nebula particulates to large objects, avoiding the problematic m-km size range, involves formation of dense clumps of aerodynamically selected, typically mm-size particles in protoplanetary turbulence. There is evidence that at least the ordinary chondrite parent bodies were initially composed entirely of a homogeneous mix of such particles generally known as "chondrules" [2]. Thus, while it is arcane, turbulent preferential concentration acting directly on chondrule size particles are worthy of deeper study. Here, we present the statistical determination of particle multiplier distributions from numerical simulations of particle-laden isotopic turbulence, and a cascade model for modeling turbulent concentration at lengthscales and Reynolds numbers not accessible by numerical simulations. We find that the multiplier distributions are scale dependent at the very largest scales but have scale-invariant properties under a particular variable normalization at smaller scales.

protoplanetary nebulae↗
NASA NTRSDate not supplied

Validation Experiments of Incipient Turbulent Separation over an Axisymmetric Afterbody

Historically, the flow physics involved with most turbulent separated flows have presented fundamental challenges in validation between experimental and numerical approaches. As recognized by the CFD Vision 2030 study commissioned by NASA, validation of Reynolds-averaged Navier-Stokes (RANS) models and other scale-resolving methods for turbulent separated flow requires the support of advanced, high-fidelity experiments designed specifically for CFD implementation. In accordance with this effort, a new test platform, referred to as the NASA Axisymmetric Afterbody, was designed to obtain detailed information of the flow field over a smooth body, undergoing adverse pressure gradient induced separation for a fixed Reynolds number, Re = 180,000. The parametric body offers a range of flow states from fully attached,incipient separation, to fully separated flow based on variable afterbody geometries. In an initial effort to evaluate RANS turbulence model capabilities, the present configuration of the axisymmetric model features a mild adverse pressure gradient over the contoured boattail section, inducing incipient turbulent separation. Experiments include steady pressure measurements to serve as preliminary comparisons to simulation studies, which examine the effect of variable grid domains and RANS turbulence models, in an effort to understand and evaluate the critical variability between solutions for the present configuration. Results indicate potential discrepancies may be due to the effect of the square tunnel test section walls, relatively large blockage ratio, and inconsistent reference parameters. Ongoing work will focus on the experimental campaigns to obtain surface flow visualizations and high-resolution, off-body flow field measurements using Stereoscopic Particle Image Velocimetry (SPIV) and Laser Doppler Velocimetry (LDV) techniques to provide a detailed benchmark dataset to aid turbulence modelers.

axisymmetric afterbody↗
NASA NTRS2021

Modeling Laminar-to-Turbulent Transition in the Panel Test Facility Arcjet

A computational fluid dynamics (CFD) laminar-to-turbulence transition model was developed for the NASA Ames Research Center’s 20 MW Panel Test Facility (PTF). Surface pressure, heat flux to a water-cooled plate, and surface temperature on a tile plate coated with reaction-cured glass were measured across several conditions in the facility and compared with laminar and fully-turbulent CFD simulations. The potential for bypass transition in the PTF nozzle was assessed via application of the Langtry-Menter four-equation transitional shear-stress transport (SST) model. Results from the transition model were inconsistent with measurements. Flow interaction with a boundary conditioning plate feature inside the nozzle was also investigated as a potential source of laminar-to-turbulent transition using two turbulence models with specified transition locations. The Baldwin-Lomax turbulence model was configured to simulate a transition at the upstream edge of the boundary conditioning plate and produced results consistent with the surface pressure measurements but not the cold-wall heat flux. Finally, the SST turbulence model was calibrated to transition at the upstream edge of the boundary conditioning plate and produced results consistent with both the surface pressure and cold-wall heat flux measurements. The SST-based model demonstrated reasonable agreement with surface temperature measurements on the reaction-cured glass tile, albeit with some discrepancies.

Computational Fluid Dynamics↗
NASA NTRSDate not supplied

Assessment of Turbulence Models for a Single-Injector Cooling Flow

This work assesses the ability of Reynolds-averaged Navier-Stokes turbulence models to predict a fundamental thermal cooling flow configuration. This geometry consists of a plate with a single cooling hole positioned downstream of a heated exhaust nozzle. The linear Shear Stress Transport (SST), non-linear Quadratic Constitutive Relation (QCR), and differential SSG/LRR Reynolds Stress Model (RSM) turbulence models were investigated for flow conditions with a blowing ratio of 1.0 and 2.0. Despite significant differences in turbulence model complexity, the results miss important details observed in the data and large eddy simulation (LES). Injection penetration is over-predicted. Mixing and centerline wake recovery is too slow. Temperature predictions are worse than velocity, suggesting that perhaps the simple gradient diffusion approximation used to model the turbulent heat flux may be to blame. These observations are put into context using other studies to identify shortcomings in the modeling of both the turbulent stress and turbulent heat flux.

Film Cooling↗
NASA NTRSDate not supplied

Assessment of Turbulence Models for a Single-Injector Cooling Flow

This work assesses the ability of Reynolds-averaged Navier-Stokes turbulence models to predict a fundamental thermal cooling flow configuration. This geometry consists of a plate with a single cooling hole positioned downstream of a heated exhaust nozzle. The linear Shear Stress Transport (SST), non-linear Quadratic Constitutive Relation (QCR), and differential SSG/LRR Reynolds Stress Model (RSM) turbulence models were investigated for flow conditions with a blowing ratio of 1.0 and 2.0. Despite significant differences in turbulence model complexity, the results miss important details observed in the data and large eddy simulation (LES). Injection penetration is over-predicted. Mixing and centerline wake recovery is too slow. Temperature predictions are worse than velocity, suggesting that perhaps the simple gradient diffusion approximation used to model the turbulent heat flux may be to blame. These observations are put into context using other studies to identify shortcomings in the modeling of both the turbulent stress and turbulent heat flux.

Film Cooling↗
NASA NTRSDate not supplied

Novel Turbulence Model Tailored for Complex Rocket Motor Exhaust Jets

This paper describes a new RANS turbulence model intended to give improved accuracy in turbulence that is affected by compressibility, rotation and curvature, and variable density, making it well-suited to complex rocket motor exhaust jets. Four key elements of the model are: the use of simple-averaged (not mass-averaged) turbulence decomposition; a second-order Taylor series for the equilibrated turbulent fluxes; empirical modeling that accounts for the combined effects of aforementioned turbulence modifiers; and model tuning on large-eddy simulation data for mixing layers for a wide range of these turbulence modifiers. The model is implemented as an extension of the k-w SST model. Results include comparisons to detached eddy simulation results for hot and cold co-flowing exhaust jets, and to experimental data for supersonic retropropulsion on the CobraMRV Mars-lander concept vehicle. The model is named TMRC for its constituents elements, the Taylor series with Mach number, rotation and curvature effects.

turbulence modeling↗
NASA NTRS1973

Turbulent kinetic energy equation and free mixing

Calculation of free shear flows was carried out to investigate the usefulness of several concepts which were previously successfully applied to wall flows. The method belongs to the class of differential approaches. The turbulence is taken into account by the introduction of one additional partial differential equation, the transport equation for the turbulent shear stress. The structure of turbulence is modeled after Bradshaw et al. This model was used successfully in boundary layers and its applicability to other flows is demonstrated. The work reported differs substantially from that of an earlier attempt to use this approach for calculation of free flows. The most important difference is that the region around the center line is treated by invoking the interaction hypothesis (concerning the structure of turbulence in the regions separated by the velocity extrema). The compressibility effects on shear layer spreading at low and moderate Mach numbers were investigated. In the absence of detailed experiments in free flows, the evidence from boundary layers that at low Mach numbers the structure of turbulence is unaffected by the compressibility was relied on. The present model was tested over a range of self-preserving and developing flows including pressure gradients using identical empirical input. The dependence of the structure of turbulence on the spreading rate of the shear layer was established.

Morel, T.↗
NASA NTRS1973

Turbulence in electrostatic ion acoustic shocks

Three types of collisionless electrostatic ion acoustic shocks are investigated using a double plasma (DP) device: (1) laminar shocks; (2) small amplitude turbulent shocks in which the turbulence is confined to be upstream of the shock potential jump; and (3) large amplitude turbulent shocks in which the wave turbulence occurs throughout the shock transition. The wave turbulence is generated by ions which are reflected from the shock potential; linear theory spatial growth increments agree with experimental values. The experimental relationship between the shock Mach number and the shock potential is shown to be inconsistent with theoretical shock models which assume that the electrons are isothermal. Theoretical calculations which assume a trapped electron equation of a state and a turbulently flattened velocity distrubution function for the reflected ions yields a Mach number vs potential relationship in agreement with experiment.

Means, R. W.↗
NASA NTRS1973

Turbulence in electrostatic ion-acoustic shocks

Three types of collisionless electrostatic ion-acoustic shocks are investigated using the University of California, Los Angeles, double plasma device: (1) laminar shocks; (2) small amplitude turbulent shocks in which the turbulence is confined to be upstream of the shock potential jump; and (3) large amplitude turbulent shocks in which the wave turbulence occurs throughout the shock transition. The wave turbulence is generated by ions which are reflected from the shock potential; linear theory spatial growth increments agree with experimental values. The experimental relationship between the shock Mach number and the shock potential is shown to be inconsistent with theoretical shock models which assume that the electrons are isothermal. Theoretical calculations which assume a trapped electron equation of a state and a turbulently flattened velocity distribution function for the reflected ions yields a Mach number vs potential relationship in agreement with experiment.

Means, R. W.↗
NASA NTRS1975

Statistical model for premixed turbulent flames

Statistical concepts and physical arguments are used to develop closure models for the mean energy equation governing one-dimensional, premixed, intense turbulent flames. It is proposed that the turbulent transport terms can be modeled by a turbulent conductivity based on turbulence kinetic energy (k) and energy dissipation rate (epsilon). The models obtained are used to derive correlations for the turbulent flame speed. Results show that there are three different flame regimes: a low-intensity turbulence, wrinkled flame; a high-intensity, fast-chemistry flame; and a high-intensity, finite-rate-chemistry flame.

Gouldin, F. C.↗
NASA NTRS1975

Observations of turbulence in the atmosphere of Venus using Mariner 10 radio occultation measurements

A technique is developed for estimating the outer scale of turbulence in a planetary atmosphere using dual-frequency radio occultation measurements. This technique is based on the frequency dependence of the temporal frequency spectra for the log-amplitude fluctuations and is particularly useful when probing the upper atmosphere where the transverse velocity of the line-of-sight path is decelerating very rapidly. It is applied to the region of strong turbulence located in the vicinity of 60 km on the dayside of the atmosphere of Venus using the Mariner 10 S/X radio occultation measurements. It is found that, contrary to earlier findings from Mariner 5, the outer scale of turbulence is at least 5 km. It appears that the outer scale of turbulence is as large as the vertical extent of the region of strong turbulence. Estimates of the structure constants for refractive index and temperature fluctuations indicate that the turbulence is stronger than that measured near the earth's tropopause.

Woo, R.↗