Search NASA⌕ Search

SEARCH · Search NASA

Results for “Texture”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Metamorphism of the H-group chondrites - Implications from compositional and textural trends in chondrules

The paper discusses element bulk compositions of 373 chondrules from 18 H3 to H6 chondrites determined by broad-beam electron probe analysis. Bulk chondrule FeO and Al2O3 amounts increase and TiO2 and Cr2O3 decrease with increasing petrologic type; normative faylite, albite, and plagioclase amounts increase through the petrologic sequence. Chondrule diameters correlate with phenocryst sizes in porphyritic chondrules of type 3 chondrites, but this correlation is diminished in the higher petrologic types. The compositional trends in chondrules through the petrologic sequence are attributed to diffusion and equilibration among chondrules, and between chondrules and matrix in response to increasing degrees of thermal metamorphism. It is suggested that H-group chondrites are formed by accretion of high-temperature (chondrules) and low-temperature (matrix) materials. Internal reheating of the parent materials to different temperatures caused compositional equilibration, grain coarsening, and reduction of FeO to Fe(0) by carbon.

Lux, G.↗
NASA NTRS1980

Surface texture of Vesta from optical polarimetry

Polarimetric, photometric, and reflective spectroscopic properties of asteroid 4 Vesta are simulated in the laboratory by a preparation of eucrite Bereba consisting of a broad mixture of particle sizes (mainly greater than 50-micron) mixed and partially coated with particles of size 10 microns and less. Coarse grains are necessary for producing the same albedo and a very fine dust coating is necessary for producing the same polarization inversion angle as observed for Vesta. There are less small grains and fine dust in this sample than in lunar soils. Photometrically, if coating a sphere, this sample shows a constant brightness on the sunward half of the observed hemisphere, the brightness being given on the other half by the Minnaert reciprocity principle. With such a photometric behavior, the global geometric albedo and the sub-earth point geometric albedo differ by no more than 5%. The microscopic phase coefficient is 0.021 magnitude per degree for the sample; the larger value, 0.025, observed telescopically for Vesta, indicates that large-scale roughness is present on this asteroid.

Le Bertre, T.↗
NASA NTRS1980

Radar measurement of heterogeneous small-scale surface texture on Mars Chryse

Radar measurements from Chryse Planitia in 1978 confirm earlier estimates of 4-5 deg rms slope (on meter scales) over 45-50 deg W longitude. The new measurements also confirm a skewing of the measured spectra. This has now been interpreted as a combined result of large-scale surface tilt and a side effect of the decrease in small-scale roughness as the subradar point moves from the basin floor toward the west.

Simpson, R. A.↗
NASA NTRS1981

Relationships between soil moisture-holding properties and soil texture, organic matter content, and bulk density

Specimens from the surface horizon and the subsoil of 62 soil horizons in Hedmark and Oppland were investigated to study how the mechanical composition of the soil, the organic matter content and the bulk density affect their porosity and air capacity and their total and available water content. Most of the specimens belonged to the loam group, and a smaller number was from sandy and silty types of soil. Equations were established to make it possible to calculate the water retention curves and the amount of available water from the above mentioned parameters. As a rule, errors derived from the equations are no greater than those which are found in similar research in other countries.

Riley, H. C. F.↗
NASA NTRS1982

Radar measurement of small-scale surface texture - Syrtis Major

Available data on Syrtis Major is examined and compared in light of lunar experience in order to infer the small-scale structure and study the problem of origin and present state. The radar data are reviewed, introducing three previously unpublished sets of observations obtained during the 1978 Mars opposition. Syrtis Major is shown to be smooth and relatively homogeneous when sensed at centimeter wavelengths, root mean square surface slopes ranging from more than 1.5-2.0 deg in the east to less than 0.5 deg along the western margin at wavelength 12.6 cm. Radar reflectivity increases from about 5% to about 12% across Syrtis Major, being greatest near the western margin. A self-consistent model for the surface of Syrtis Major is arrived at which includes structure on all scales. It is shown that the moon is not a good radar analog for Syrtis Major.

Simpson, R. A.↗
NASA NTRS1986

Loss of fine-scale surface texture in Viking Orbiter images and implications for the inferred distribution of debris mantles

A numerical, self-consistent model is defined for filtering out the effects of haze which cause a loss of fine-scale features in Viking Orbiter imagery of the Mars surface. Increased definition is necessary if the visual data is to serve for identifying terrain features which indicate the presence of volatiles such as ice. Crater images are used to calculate the change in atmospheric optical properties that accounts for alterations in the discriminability of crater features. Modulation transfer functions are developed for the image obscuration contributions of the atmosphere and the camera lens, thereby quantifying the smallest crater (6-7 pixels) that can be seen. The radiance of the viewed scene is modeled, and an atmospheric obscuration parameter is obtained as a function of the ratio of the atmospheric and surface obscuration contributions to the radiance at the detector. The contribution of the surface alone can then be identified. The model is applied in calculations of the total number of observed craters for comparisons with the expected number of craters, and to assess the potential for using the Viking cameras to characterize the geomorphic properties of various regions of the Mars surface.

Kahn, R.↗
NASA NTRS1985

Surface texture characterization by angular distributions of scattered light

Work at the National Bureau of Standards to develop an on-line optical measurement device and attendant algorithms for automated optical scattering measurements of machined metal surfaces are described. The surfaces could be milled, ground or lapped, and the system is intended to categorize the resulting surface characteristics. The optical device consists of a He-Ne laser which is shone on a surface. The scattered light is captured by a semicircular array of 87 detector elements rotated over the scanned area. The light signals are processed through a digital voltmeter and then an A/D converter. The signals are then stored for later comparisons with optical scattering data obtained by optical instruments used with stylus instruments for characterizing surface topographies. A theoretical model has been defined which relates light scattering and the characteristics of the surface roughness. Initial experimental results with a sinusoidal surface have indicated that although the system can follow the trend of the roughness, the roughness amplitude is as yet uncertainly defined and the computations require excessive time.

Gilsinn, D. E.↗
NASA NTRS1988

Surficial textures of the Galilean satellites

The observations of the Galilean satellites of Jupiter obtained with the IUE have been analyzed as a function of solar phase angle. By fitting the measurements to a shadowing model, comparative descriptions of the microtextures of the optically active portion of the surfaces of the satellites are derived. Important differences among the satellites and between leading and trailing hemispheres of individual satellites result from the different processes of meteoritic bombardment, magnetospheric interaction, and geological resurfacing that operate in the Jovian system. Io and Callisto have the most tenuous upper regoliths, whereas the surface of the leading side of Europa is the most compact.

Buratti, Bonnie J.↗
NASA NTRS1989

Cloud field classification based upon high spatial resolution textural features. II - Simplified vector approaches

This paper compares the results of cloud-field classification derived from two simplified vector approaches, the Sum and Difference Histogram (SADH) and the Gray Level Difference Vector (GLDV), with the results produced by the Gray Level Cooccurrence Matrix (GLCM) approach described by Welch et al. (1988). It is shown that the SADH method produces accuracies equivalent to those obtained using the GLCM method, while the GLDV method fails to resolve error clusters. Compared to the GLCM method, the SADH method leads to a 31 percent saving in run time and a 50 percent saving in storage requirements, while the GLVD approach leads to a 40 percent saving in run time and an 87 percent saving in storage requirements.

Chen, D. W.↗
NASA NTRS1991

Ion beam textured and coated surfaces experiment (IBEX)

The IBEX, with 36 samples of various materials, was placed aboard the LDEF. Twenty-seven of the samples had surfaces modified using ion beam technology, and nine were made up of commercially available materials. The materials are in some way useful in space power systems. The various types of materials tested included six categories: (1) ion beam structured surfaces suitable for solar thermal (concentrator) or space radiators; (2) ion beam sputtered conductive coatings for thermal and space charge control; (3) solar reflector surfaces; (4) flexible thin film coatings and solar array blanket material for protection of spacecraft polymers; (5) painted and/or state-of-the-art solar thermal materials; and (6) micrometeoroid sensitive detector. Data analysis presented include the optical properties of each surface before and after exposure to the space environment and the respective backup surfaces.

Mirtich, Michael J.↗
NASA NTRS1991

Ganymede and Callisto - Surface textural dichotomies and photometric analysis

Complete solar phase curves of the Ganymede and Callisto leading and trailing hemispheres, which have been obtained by reducing Voyager imaging observations and combining them with ground-based telescopic data, are presently fit to scattering models in order to derive hemispherical values of the single scattering albedo, the single particle phase function (SPPF), the compaction state (CS) of the optically active portion of the regolith, and the mean slope angle of macroscopic features. While Callisto's leading side is composed of particles that are more strongly backscattering than the trailing side, no hemispheric differences are found in the CS, surface roughness, or SPPF.

Buratti, Bonnie J.↗
NASA NTRS1991

Iddingsite in the Nakhla meteorite: TEM study of mineralogy and texture of pre-terrestrial (Martian?) alterations

Rusty-colored veinlets and patches in the Nakhla meteorite, identified as iddingsite, are pre-terrestrial. The rusty material is iddingsite (smectites + hematite + ferrihydrite); like terrestrial iddingsites, it probably formed during low-temperature interaction of olivine and water. Fragments of rusty material with host olivine were removed from thin sections of Nakhla with a tungsten needle. Fragments were embedded in epoxy, microtomed to 100 nanometers thickness, and mounted on Cu grids. Phase identifications were by Analytical Electron Microscopy/Energy Dispersive X-ray Analysis (EM/EDX) standardless chemical analyses (for silicates), electron diffraction (hematite and ferrihydrite), and lattice fringe imaging. This iddingsite in Nakhla is nearly identical to some formed on Earth, suggesting similar conditions of formation on the Shergottites-Nakhlites-Chassigny (SNC) meteorite parent planet. A more detailed account of the results is presented.

Treiman, Allan H.↗
NASA NTRS1992

Increased efficiency with surface texturing in ITO/InP solar cells

Optimization of an InP solar cell with a V-grooved surface is discussed. Total internal reflection in the coverglass reduces surface reflection and can recover light reflected from the front metallization. Results from the first ITO/InP solar cells on low-angle V-grooved substrates are presented, showing a 5.8 percent increase in current.

Jenkins, Phillip↗
NASA NTRS1993

Soil texture and granulometry at the surface of Mars

Attention is given to a characterization of the physical behavior of the Martian upper surface in its first few decimeters on the basis of mutual relationships between three parameters: the linear polarization of the reflected light, the visual albedo, and the thermal inertia. Polarimetric scans raked a strip covering two contrasting regions, the dark-hued Mare Erythraeum, and the light-hued Thaumasia. Erythraeum is characterized everywhere by a uniform polarization response, despite the large geomorphological diversity of the surface. A ubiquitous coating or mantling with small dark grains of albedo 12.7 percent, with a radius of 10 to 20 microns, is indicated. Thaumasia exhibits a large variety of soil properties. A typical location with albedo of 16.3 percent has a surface covered with orange grains, probably very dispersed in size, for which the largest grains are 20 to 40 microns.

Dollfus, Audouin↗
NASA NTRS1991

Tactile discrimination and representations of texture, shape, and softness

We present here some of the salient results on the tactual discriminabilities of human subjects obtained through psychophysical experiments, and the associated peripheral neural codes obtained through electrophysiological recordings from monkey single nerve fibers. Humans can detect the presence of a 2 micron high single dot on a smooth glass plate stroked on the skin, based on the responses of Meissner type rapidly adapting fibers (RAs). They can also detect a 0.06 micron high grating on the plate, owing to the response of Pacinian corpuscle fibers. Among all the possible representations of the shapes of objects, the surface curvature distribution seems to be the most relevant for tactile sensing. Slowly adapting fibers respond to both the change and rate of change of curvature of the skin surface at the most sensitive spot in their receptive fields, whereas RAs respond only to the rate of change of curvature. Human discriminability of compliance of objects depends on whether the object has a deformable or rigid surface. When the surface is deformable, the spatial pressure distribution within the contact region is dependent on object compliance, and hence information from cutaneous mechanoreceptors is sufficient for discrimination of subtle differences in compliance. When the surface is rigid, kinesthetic information is necessary for discrimination, and the discriminability is much poorer than that for objects with deformable surfaces.

Srinivasan, M. A.↗