Search NASA⌕ Search

SEARCH · Search NASA

Results for “Transition metals”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS2024

Morphology and Luminescence Properties of Transition Metal Doped Zinc Selenide Crystals

Zinc selenide is an excellent matrix material to dope with rare-earth and transition metal to achieve mid-infrared luminescence to develop high power lasers. The luminescence, morphology and refractive index is significantly affected by the doping and defects generated due to size and valency of dopants, concentration, growth process and convection during the growth. The aim of the study is to investigate effect of point and line defects generated due to low doping of iron and chromium on the emission and morphology of the zinc selenide. Luminescence and morphological properties of large iron and chromium doped zinc selenide single crystals were studied to evaluate the effect of extremely low residual impurities and defects associated with the doping process. The emission properties following both short wavelength (i.e., ultraviolet; 350 – 370 nm) excitation and longer wavelength (i.e., near infrared; 850 – 870 nm) excitation were characterized. Luminescence emission bands were identified in both doped crystals. In addition to the primary emission bands, satellite peaks and intra-center transitions were also observed. Due to local population defects associated with the residual impurities (ppm to ppb) in the Fe-ZnSe and Cr-ZnSe crystals, peak emission wavelengths were observed to shift. Raman studies using 266 and 532 – nm excitation revealed different positions of longitudinal and transverse peaks for Fe-ZnSe and Cr-ZnSe crystals, associated with different levels of defects due to the different ion sizes. The emission bands were found to decrease in intensity due to recombination of residual impurity co-dopants and complex defects generated during growth and fabrication. Cryogenic temperature analyses revealed a very clean emission band due to freezing of some of the point and line defects. An emission band observed at 980 nm for both crystals at room temperature as well as cryogenic temperatures indicates a vibronic peak in ZnSe. The scanning electron microscopy (SEM) images of the local morphology support the conclusion that small crystallites in doped crystals are also present.

Zinc selenide↗
DOE OSTI2025

Platinum and Gold Supported on Transition Metal Nitrides for Hydrogen Evolution in an Alkaline Electrolyte

Here, as the urgency to reduce reliance on fossil fuels increases due to carbon dioxide emissions, hydrogen produced by renewably powered water electrolysis has emerged as a promising technology. Alkaline electrolyzers typically exhibit lower current densities than acidic electrolyzers due to the slow kinetics of the hydrogen evolution reaction (HER) under alkaline conditions. This work developed Pt- and Au-modified transition metal nitride (TMN) thin films for improving alkaline HER kinetics. One monolayer Pt–VN, Pt–Mo 2 N, and Pt–TiN were the most promising thin-film catalysts, with alkaline HER activity approaching that of a bulk Pt foil. Additionally, the Gibbs free energy of adsorbed hydrogen was identified as a useful descriptor for alkaline HER activity on TMN and TMN-supported catalysts and has the potential to guide future studies on TMN-based catalysts for enhancing alkaline HER. For practical applications, the thin-film catalysts were then extended to Pt- and Au-modified TMN powders for alkaline HER. Both 5 wt % Pt/TiN and 2 wt % Pt/TiN powders exhibited lower overpotentials at 5 mA/cm 2 when normalized by the Pt electrochemical surface area than the commercial 5 wt % Pt/C benchmark, suggesting a Pt–TiN synergy that creates opportunities for more cost-effective alkaline HER cathodes. Moreover, 20 wt % Au/Mo 2 N also displayed an enhancement in HER activity when compared to the commercial 20 wt % Au/C benchmark.

58 GEOSCIENCES↗
DOE OSTI2024

Charge density waves in two-dimensional transition metal dichalcogenides

Charge density wave (CDW is one of the most ubiquitous electronic orders in quantum materials. While the essential ingredients of CDW order have been extensively studied, a comprehensive microscopic understanding is yet to be reached. Recent research efforts on the CDW phenomena in two-dimensional (2D) materials provide a new pathway toward a deeper understanding of its complexity. This review provides an overview of the CDW orders in 2D with atomically thin transition metal dichalcogenides (TMDCs) as the materials platform. We mainly focus on the electronic structure investigations on the epitaxially grown TMDC samples with angle-resolved photoemission spectroscopy and scanning tunneling microscopy/spectroscopy as complementary experimental tools. Finally, we discuss the possible origins of the 2D CDW, novel quantum states coexisting with them, and exotic types of charge orders that can only be realized in the 2D limit.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Local Coordination Environment of 3d and 4d Transition Metal Ions in LiCl-KCl Eutectic Mixture

In this study, the structure and coordination environment of two 3d transition elements (Ni and Cr) is investigated in a molten chloride salt system. Electronic absorption spectroscopy was employed to elucidate their coordination environment in 3LiCl-2KCl eutectic salt, as a function of temperature. Density functional theory (DFT) modeling was used to determine the coordination environment of the transition metal species in the eutectic composition as well as the optical spectra computationally. The Ni 2+ and Cr 3+ exist in a tetrahedral and octahedral coordination environment, respectively, in eutectic salt. The spectra thus obtained were compared with the experimental data; a reasonable qualitative agreement was obtained between experimental and computational Ni 2+ and Cr 3+ spectra, and the coordination of both elements in the eutectic composition were in excellent agreement with the experimentally determined results. Computational results were also obtained for two 4d elements, Mo 3+ and Nb 3+ , with both quantum molecular dynamics (QMD) and hybrid functional optical spectra indicating octahedral coordination.

36 MATERIALS SCIENCE↗
NASA NTRS1969

Electrolytic separation of crystals of transition-metal oxides

Versatile flux system grows large, well-formed, stoichiometric single crystals of mixed oxides of the transition-metal elements. These crystals have important uses in the microwave field, and applications as lasers and masers in communications.

Arnott, R. J.↗
NASA NTRS1972

Infrared absorptivities of transition metals at room and liquid-helium temperatures.

Evaluation of experimental data concerning the normal spectral absorptivities of the transition metals, nickel, iron, platinum, and chromium, at both room and liquid-helium temperatures in the wavelength range from 2.5 to 50 microns. The absorptivities were derived from reflectivity measurements made relative to a room-temperature vapor-deposited gold reference mirror. The absorptivity of the gold reference mirror was measured calorimetrically, by use of infrared laser sources. Investigation of various methods of sample-surface preparation resulted in the choice of a vacuum-annealing process as the final stage. The experimental results are discussed on the basis of the anomalous-skin-effect theory modified for multiple conduction bands. As predicted, the results approach a single-band model toward the longer wavelengths. Agreement between theory and experiment is considerably improved by taking into account the modification of the relaxation time due to the photon-electron-phonon interaction proposed by Holstein (1954) and Gurzhi (1958); but, particularly at helium temperatures, the calculated curve is consistently below the experimental results.

Jones, M. C.↗
NASA NTRS1982

On correlation in the first row transition metal atoms

CI (SD) calculations using both SCF and MCSCF references have been performed for the first-row transition metal atoms. Basis sets as large as 84 STO's have been used. At the highest level of calculation, good agreement with experiment is found. If relativistic effects are considered, the agreement is somewhat poorer. This aspect, as well as the trends and results, is discussed.

Bauschlicher, C. W., Jr.↗
DOE OSTI2023

Correlating Rate-Dependent Transition Metal Dissolution between Structure Degradation in Li-Rich Layered Oxides

Understanding the mechanism of the rate-dependent electrochemical performance degradation in cathodes is crucial to developing fast charging/discharging cathodes for Li-ion batteries. Here, in this work, taking Li-rich layered oxide Li 1.2 Ni 0.13 Co 0.13 Mn 0.54 O 2 as the model cathode, the mechanisms of performance degradation at low and high rates are comparatively investigated from two aspects, the transition metal (TM) dissolution and the structure change. Quantitative analyses combining spatial-resolved synchrotron X-ray fluorescence (XRF) imaging, synchrotron X–ray diffraction (XRD) and transmission electron microscopy (TEM) techniques reveal that low-rate cycling leads to gradient TM dissolution and severe bulk structure degradation within the individual secondary particles, and especially the latter causes lots of microcracks within secondary particles, and becomes the main reason for the fast capacity and voltage decay. In contrast, high-rate cycling leads to more TM dissolution than low-rate cycling, which concentrates at the particle surface and directly induces the more severe surface structure degradation to the electrochemically inactive rock-salt phase, eventually causing a faster capacity and voltage decay than low-rate cycling. These findings highlight the protection of the surface structure for developing fast charging/discharging cathodes for Li-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2023

Orbital correlations in ultrathin films of late transition metals

We develop a two-orbital Hubbard model of electron correlations in ultrathin (111)-oriented fcc films of late transition metals such as Co and Ni. Our model indicates that the Mott-Hund’s interaction results in ferromagnetic nearest-neighbor orbital correlations. Frustration associated with the mismatch between orbital and crystal symmetries prevents orbital ordering, resulting in the orbital liquid state. This state can be manifested in phenomena involving spin-orbit coupling, such as magnetic anisotropy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Implanting Transition Metal into Li 2 O-Based Cathode Prelithiation Agent for High-Energy-Density and Long-Life Li-Ion Batteries

Compensating the irreversible loss of limited active lithium (Li) is essentially important for improving the energy-density and cycle-life of practical Li-ion battery full-cell, especially after employing high-capacity but low initial coulombic efficiency anode candidates. Introducing prelithiation agent can provide additional Li source for such compensation. Herein, we precisely implant trace Co (extracted from transition metal oxide) into the Li site of Li 2 O, obtaining (Li 0.66 Co 0.11$\square$0.23 ) 2 O (CLO) cathode prelithiation agent. Further, the synergistic formation of Li vacancies and Co-derived catalysis efficiently enhance the inherent conductivity and weaken the Li-O interaction of Li 2 O, which facilitates its anionic oxidation to peroxo/superoxo species and gaseous O 2 , achieving 1642.7 mAh/g ~Li2O prelithiation capacity (≈980 mAh/g for prelithiation agent). Coupled 6.5 wt % CLO-based prelithiation agent with LiCoO 2 cathode, substantial additional Li source stored within CLO is efficiently released to compensate the Li consumption on the SiO/C anode, achieving 270 Wh/kg pouch-type full-cell with 92 % capacity retention after 1000 cycles.

25 ENERGY STORAGE↗
DOE OSTI2020

Intrinsic orbital and spin Hall effects in monolayer transition metal dichalcogenides

The orbital Hall effect (OHE) is the phenomenon of transverse flow of orbital moment in the presence of an applied electric field. Solids with broken inversion symmetry are expected to exhibit a strong OHE due to the presence of an intrinsic orbital moment at individual momentum points in the Brillouin zone, which in the presence of an applied electric field flows in different directions causing a net orbital Hall current. Here we provide a comprehensive understanding of the effect and its tunability in the monolayer two-dimensional (2D) transition metal dichalcogenides (TMDCs). Both metallic and insulating TMDCs are investigated from full density-functional calculations and effective d-band tight-binding models, as well as a minimal four-band model for the valley points that captures the key physics of the system. For the tuning of the OHE, we examine the role of hole doping as well as the change in the band parameters, which, e.g., can be controlled by strain.We demonstrate that the OHE is a more fundamental effect than the spin Hall effect (SHE), with the momentum-space orbital moments inducing a spin moment in the presence of the spin-orbit coupling, leading to the SHE. The physics of the OHE, described here, is relevant for 2D materials with broken inversion symmetry in general, even beyond the TMDCs, providing a broad platform for future research.

2D materials↗
DOE OSTI2024

Structure sensitivity in adsorbate-induced adatom formation on FCC transition-metal surfaces

Recent surface science discoveries reveal that adsorbates may induce in situ sub-nanometer cluster formation on transition-metal surfaces. To elucidate the structure sensitivity behind this phenomenon, we performed density functional theory calculations to construct an adatom formation energy database for eight fcc metals and 26 adsorbates commonly involved in catalytic reactions. We show that the adatom formation on (100) surfaces is generally easier than that on (111) surfaces. Many adsorbate/metal pairs exist, mostly on Pd, Ni, Rh, Pt, and Ir, for which adsorbates might induce adatom formation under near-ambient conditions on the (100) facet, but not on (111), highlighting the role of more open facets in adatom formation on metals intrinsically harder than Ag, Au, and Cu. Furthermore, our study offers a new perspective towards understanding structure sensitivity in heterogeneous thermal- and electro-catalytic systems such as methane steam reforming, Fischer-Tropsch synthesis, and ammonia decomposition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Strongly Correlated States of Transition Metal Spin Defects: The Case of an Iron Impurity in Aluminum Nitride

We investigate the electronic properties of an exemplar transition metal impurity in an insulator, with the goal of accurately describing strongly correlated defect states. Here, we consider iron in aluminum nitride, a material of interest for hybrid quantum technologies, and we carry out calculations with quantum embedding methods, density matrix embedding theory (DMET) and quantum defect embedding theory (QDET), and with spin-flip time-dependent density functional theory (TDDFT). We show that both DMET and QDET accurately describe the ground state and low-lying excited states of the defect and that TDDFT yields photoluminescence spectra in agreement with experiments. In addition, we provide a detailed discussion of the convergence of our results as a function of the active space used in the embedding methods, thus defining a protocol to obtain converged data directly comparable with experiments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1980

Adhesion and friction of single-crystal diamond in contact with transition metals

An investigation was conducted to examine the adhesion and friction of single-crystal diamond in contact with various transition metals and the nature of metal transfer to diamond. Sliding friction experiments were conducted with diamond in sliding contact with the metals yttrium, titanium, zirconium, vanadium, iron, cobalt, nickel, tungsten, platinum, rhenium and rhodium. All experiments were conducted with loads of 0.05 to 0.3 N, at a sliding velocity of 0.003 m per minute, in a vacuum of 10 to the -8th Pa, at room temperature, and on the (111) plane of diamond with sliding in the 110 line type direction. The results of the investigation indicate that the coefficient of friction for diamond in contact with various metals is related to the relative chemical activity of the metals in high vacuum. The more active the metal, the higher the coefficient of friction. All the metals examined transferred to the surface of diamond in sliding.

Miyoshi, K.↗
NASA NTRS1992

Theoretical study of the bonding of the first-row transition-metal positive ions to ethylene

Ab initio calculations were performed to study the bonding of the first-row transition-metal ions with ethylene. While Sc(+) and Ti(+) insert into the pi bond of ethylene to form a three-membered ring, the ions V(+) through Cu(+) form an electrostatic complex with ethylene. The binding energies are compared with those from experiment and with those of comparable calculations performed previously for the metal-acetylene ion systems.

Sodupe, M.↗
NASA NTRS1992

Theoretical study of transition-metal ions bound to benzene

Theoretical binding energies are reported for all first-row and selected second-row transition metal ions (M+) bound to benzene. The calculations employ basis sets of at least double-zeta plus polarization quality and account for electron correlation using the modified coupled-pair functional method. While the bending is predominantly electrostatic, the binding energies are significantly increased by electron correlation, because the donation from the metal d orbitals to the benzene pi* orbitals is not well described at the self-consistent-field level. The uncertainties in the computed binding energies are estimated to be about 5 kcal/mol. Although the calculated and experimental binding energies generally agree to within their combined uncertainties, it is likely that the true binding energies lie in the lower portion of the experimental range. This is supported by the very good agreement between the theoretical and recent experimental binding energies for AgC6H6(+).

Bauschlicher, Charles W., Jr.↗
DOE OSTI2023

Surface Reorganization of Transition Metal Dichalcogenide Nanoflowers for Efficient Electrochemical Coenzyme Regeneration

In the past 20 years, enzymatic conversions have been intensely examined as a practical and environmentally friendly alternative to traditional organocatalytic conversions for chemicals and pharmaceutical intermediate production. Out of all commercial enzymes, more than one-fourth are oxidoreductases that operate in tandem with coenzymes, typically nicotinamide adenine dinucleotide (NADH) or nicotinamide adenine dinucleotide phosphate (NADPH). Enzymes utilize coenzymes as a source for electrons, protons, or holes. Unfortunately, coenzymes can be exorbitant; thus, recycling coenzymes is paramount to establishing a sustainable and affordable cell-free enzymatic catalyst system. Herein, cost-effective transition metal dichalcogenides (TMDCs), 2H-MoS 2 , 2H-WS 2 , and 2H-WSe 2 , were employed for the first time for direct electrochemical reduction of NAD + to the active form of the NADH (1,4-NADH). Of the three TMDCs, 2H-WSe 2 shows optimal activity, producing 1,4 NADH at a rate of 6.5 μmol cm –2 h –1 and a faradaic efficiency of 45% at -0.8 V vs Ag/AgCl. Interestingly, a self-induced surface reorganization process was identified, where the native surface oxide grown in the air was spontaneously removed in the electrochemical process, resulting in the activation of TMDCs.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Chemical Modulation of Local Transition Metal Environment Enables Reversible Oxygen Redox in Mn-Based Layered Cathodes

Oxygen redox plays a prominent role in enhancing the energy density of Mn-based layered cathodes. However, understanding the factors affecting the reversibility of oxygen redox is nontrivial due to complicated structural and chemical transformations. Here in this paper, we show that local Mn–O symmetry induced structural/chemical evolutions majorly dictate the reversibility of oxygen redox of Na x Li y Mn 1–y O 2 in Na cells. Na x Li y Mn 1–y O 2 with Jahn–Teller distorted MnO 6 octahedra undergoes severe Mn dissolution during cycling, which destabilizes the transition metal layer resulting in poor Li retention and irreversible oxygen redox. Jahn–Teller distortion of MnO 6 octahedra can be suppressed by modulating the local charge of Mn and Mn–O distance through Mg/Ti dual doping. This leads to reduced Mn dissolution and more reversible oxygen redox. Such stabilization significantly improves the electrochemical performance of Mg/Ti dual doped Na x Li y Mn 1–y O 2 . Through this work, we show that local structural stabilization through local chemical environment modification can promote reversible oxygen redox in layered cathodes.

25 ENERGY STORAGE↗