Search NASA⌕ Search

SEARCH · Search NASA

Results for “VELOCITY PROFILE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Mean flow and variability in the Kuroshio Extension from Geosat altimetry data

The mean flow and temporal and spatial variations of the Kuroshio Extension in the region of 140-180 deg E and 30-40 deg N are investigated using altimeter data from the Geosat Exact Repeat Mission (ERM). Mean surface height profiles are estimated along individual tracks by assuming the velocity profile of the Kuroshio Extension to be Gaussian-shaped and by successively fitting this synthetic current's height profile to the residual height data. The mean profiles from ascending and descending tracks are used to derive the mean surface height by an inverse method and to obtain the absolute surface height fields for the first 2.5 yr of the Geosat ERM. Both the mean and the instantaneous height fields thus derived compare well with the available hydrographic data and the SST patterns from the NOAA satellites. Effects of deep mean flow and baroclinic shear are found to be important in explaining the observed propagation speeds.

Qiu, BO↗

A correlation of mixing noise from coannular jets with inverted flow profiles

Data are correlated for jet mixing noise from coannular jets with inverted flow velocity profiles. The acoustic performance of coannular jets is compared to the performance of a hypothetical single jet with the same total mass flow, thrust, and total enthalpy flow as the coannular jet. The study shows that coannular jets with velocity ratios greater than 1.2 produce less noise than their corresponding equivalent tests and that optimum noise reduction of coannular jets in the data set occurs within a range of equivalent velocities between 500 and 700 meters per second and velocity ratios between 1.6 and 2.3. The maximum sound power reduction is found to be about 4 decibels. Directivity indices and a special set of spectral curves were developed to describe the characteristic double peak spectra of coannular jet noise. The temperature ratio between the inner and outer streams was not found to be important in this acoustic correlation. However, the mean temperature effect was included in the computations of sound pressure levels.

Pao, S. P.↗

A fluid flow analysis for convective thermal control of flight experiments

A method for thermally analyzing convectively cooled flight experiments is presented. A three-dimensional fluid flow analysis code is used to optimize air circulation patterns and to predict air velocities in thermally critical areas. The analysis results are compared with the performance characteristics of a typical isothermal free jet, and good agreement is found between velocity profiles and radial distributions for downstream flow mixing. Predicted air velocities from the fluid analysis are used to calculate forced convection coefficients for the flight experiment, and the coefficients are used in a finite difference thermal analysis code to describe the response of air temperature and heat loss for the Lidar Atmospheric Sensing Experiment during transient flight profiles. Recommendations are made for the future design of convectively cooled flight experiments.

Killough, Brian D.↗

Velocity and temperature profiles in near-critical nitrogen flowing past a horizontal flat plate

Boundary layer velocity and temperature profiles were measured for nitrogen near its thermodynamic critical point flowing past a horizontal flat plate. The heated surface was oriented both facing upward and downward. The results were compared to earlier work in which measurements were made for vertically upward flow. The boundary layer temperatures ranged from below to above the thermodynamic critical temperature. For wall temperatures below the thermodynamic critical temperature there was little variation between the velocity and temperature profiles in the three orientations. In all three orientations the point of crossing into the critical temperature region is marked by a significant flattening of the velocity and temperature profiles and also a decrease in heat transfer coefficient. As the heat flux and, consequently, wall temperature are further increased significant changes occur in the velocity and temperature profiles. Examination of near-critical heat transfer in these three flow orientations offers insights into the relative role of buoyancy forces in this regime.

Simoneau, R. J.↗

An experimental investigation of the flow field of a rectangular wall jet

The structure of a laminar, rectangular wall jet developing from an initially parabolic velocity profile was investigated with measurements of the mean and fluctuating velocity field, and with Schlieren flow visualization. The effects on mean and fluctuating velocity fields of changes in the jet Reynolds number over the range of from 0 to 4800, and of various wall lengths ranging from 0 to 312 jet widths were studied. For a given wall length and Reynolds number, disturbances in the flow field were regular and periodic, and of a constant frequency in a large region of the flow field. Small, self-excited disturbances at the nozzle exit were observed to grow exponentially with downstream distance, and roll up to form a convecting array of discrete vortices. For certain values of wall length and jet speed, discrete audible tones were detected, and appeared to be associated with an enhancement of the regularity and stability of the vortex array.

Horne, C.↗

The effects of history and predictive information on the ability of the transport aircraft pilot to predict an alert

The early detection of a developing aircraft-subsystem fault has the potential to lessen its ultimate severity. The lack of capability for such early detection is becoming critical in the aviation community. In the commercial sector, for example, twin-engine aircraft are being used for extended transport operations over water. One method to decrease the severity of a developing problem is to predict its behavior and to take appropriate corrective action. In order to investigate pilots' ability to predict events, an experiment was conducted where eighteen airline pilots predicted the time to an alert using three different displays of dials and three different time profile complexities. The three displays of dials were as follows: standard, resembling current aircraft dial presentations; history, indicating the value five seconds in the past; and predictive, indicating the value five seconds into the future. The time profiles describing the behavior of the parameter consisted of constant velocity profiles, decelerating profiles, and accelerating then decelerating profiles. Although pilots indicated that they preferred the predictive dial, the objective data did not support its use. The objective data did show that the time profiles had the most significant effect on performance in estimating the time to an alert.

Trujillo, Anna C.↗

The noise and flow characteristics of inverted-profile coannular jets

A basic understanding of the noise reduction mechanisms in shock-free inverted-velocity-profile coannular jets was studied. Acoustic measurements are first conducted in an anechoic facility to isolate the effects of inverted velocity and inverted temperature for coannular jets having constant total thrust, mass flow rate and exit area. To obtain physical explanations of the measured noise changes, several types of experiments are conducted. These include (1) source location experiments using the polar correlation technique, (2) mean flow surveys using a combination pressure/temperature probe, and (3) detailed mean flow and turbulence measurements using a two-point four-channel laser velocimeter. The results from these experiments are presented and discussed in detail. Finally, the measured variations of coannular jet mixing noise with fan-to-primary velocity ratio and static temperature ratio are interpreted by utilizing the results from the various experimental phases in conjunction with the existing Lockheed single jet noise prediction model.

Tanna, H. K.↗

An improved prediction method for noise generated by conventional profile coaxial jets

A semi-empirical model for predicting the noise generated by conventional-velocity-profile jets exhausting from coaxial nozzles is presented and compared with small-scale static and simulated flight data. The present method is an updated version of that part of the original NASA Aircraft Noise Prediction (ANOP) Program (1974) relating to coaxial jet noise. That method has been shown to agree reasonably well with model and full-scale experimental data except at high jet velocities in the region near the jet axis. Improvements to the basic circular jet noise prediction have been developed since that time which improve the accuracy, especially at high jet velocity and near the jet axis, and are incorporated into the coaxial jet procedure in this paper. The new procedure is more theoretically based and has also been improved by some empirical adjustments.

Stone, J. R.↗

Laser Doppler systems in pollution monitoring

The paper reports on a program undertaken to determine the feasibility of using a laser Doppler velocimeter (LDV) to measure smoke-stack gas exit velocity, particulate concentration, and mass flow. Measurements made with a CO2 laser Doppler radar system at a coal-burning power plant are compared with in-stack measurements made by a pitot tube. The operational principles of a LDV are briefly described along with the system employed in the present study. Data discussed include typical Doppler spectra from smoke-stack effluents at various laser elevation angles, the measured velocity profile across the stack exit, and the LDV-measured exit velocity as a function of the exit velocity measured by the in-stack instrument. The in-stack velocity is found to be about 14% higher than the LDV velocity, but this discrepancy is regarded as a systematic error. In general, linear relationships are observed between the laser data, the exit velocity, and the particulate concentration. It is concluded that an LDV has the capability of determining both the mass concentration and the mass flow from a power-plant smoke stack.

Miller, C. R.↗

Thunderstorm vertical velocities and mass flux estimated from satellite data

Infrared geosynchronous satellite data with an interval of five minutes between images are used to estimate thunderstorm top ascent rates on two case study days. A mean vertical velocity of 3.5/ms for 19 clouds is calculated at a height of 8.7 km. This upward motion is representative of an area of approximately 10km on a side. Thunderstorm mass flux of approximately 2x10 to the 11th power/gs is calculated, which compares favorably with previous estimates. There is a significant difference in the mean calculated vertical velocity between elements associated with severe weather reports (w bar=4.6/ms) and those with no such reports (2.5/ms). Calculations were made using a velocity profile for an axially symmetric jet to estimate the peak updraft velocity. For the largest observed w value of 7.8/ms the calculation indicates a peak updraft of approximately 50/ms.

Adler, R. F.↗

Thunderstorm vertical velocities estimated from satellite data

Infrared geosynchronous satellite data with an interval of 5 min between images are used to estimate thunderstorm top ascent rates on two case study days. A mean vertical velocity of 3.4 m/sec for 23 clouds is calculated at a height of 8.7 km. This upward motion is representative of an area of approximately 10 km on a side. Thunderstorm mass flux of approximately 2 times 10 to the 8th power kg/sec is calculated, which compares favorably with previous estimates. There is a significant difference in the mean calculated vertical velocity between elements associated with severe weather reports (omega = 4.9 m/sec) and those with no such reports (2.4 m/sec). Calculations were made using a velocity profile for an axially symmetric jet to estimate the peak updraft velocity. For the largest observed omega value of 7.8 m/sec the calculation indicates a peak updraft of approximately 50 m/sec.

Adler, R. F.↗

The performance of an annular vane swirler

In connection with the desirability of optimizing the design of a gas turbine combustion chamber, there exists a need for a more complete understanding of the fluid dynamics of the flow in such chambers. In order to satisfy this need, experimental and theoretical research is being conducted with the objective to study two-dimensional axisymmetric geometries under low speed, nonreacting, turbulent, swirling flow conditions. The flow enters the test section and proceeds into a larger chamber. Inlet swirl vanes are adjustable to a variety of vane angles. The present investigation concentrates on the time-mean flow characteristics which are generated by the upstream annular swirler. The investigation makes use of a five-hole pitot probe technique. A theoretical analysis of swirl numbers associated with several idealized exit velocity profiles is included, and values of the ratio of maximum swirl velocity to maximum axial velocity at different swirl strengths are given for each case.

Lilley, D. G.↗

Turbulent boundary layer of an airfoil

A need has arisen for a new determination of the velocity profiles in the boundary layer. Assuming that the character of the velocity distribution depends to a large extent on the character of the shear distribution across the boundary layer, we shall consider the nature of the shear distribution for a boundary layer with a pressure gradient.

Fediaevsky, K↗

The cosmological dependence of cluster density profiles

We use N-body simulations to study the shape of mean cluster density and velocity profiles in the nonlinear regime formed via gravitational instability. The dependence of the final structure on both cosmology and initial density field is examined, using a grid of cosmologies and scale-free initial power spectra P(k) varies as k(exp n). Einstein-de Sitter, open (Omega(sub 0) = 0.2 and 0.1) and flat, low density (Omega(sub 0) = 0.2 lambda(sub 0) = 0.8) models are examined, with initial spectral indices n = -2, -1 and 0. For each model, we stack clusters in an appropriately scaled manner to define an average density profile in the nonlinear regime. The profiles are well fit by a power law rho(r) varies as r(exp -alpha) for radii whereat the local density contrast is between 100 and 3000. This covers 99% of the cluster volume. We find a clear trend toward steeper slopes (larger alphas) with both increasing n and decreasing Omega(sub 0). The Omega(sub 0) dependence is partially masked by the n dependence; there is degeneracy in the values of alpha between the Einstein-de Sitter and flat, low-density cosmologies. However, the profile slopes in the open models are consistently higher than the Omega = 1 values for the range of n examined. Cluster density profiles are thus potentially useful cosmological diagnostics. We find no evidence for a constant density core in any of the models, although the density profiles do tend to flatten at small radii. Much of the flattening is due to the force softening required by the simulations. An attempt is made to recover the unsoftened profiles assuming angular momentum invariance. The recovered profiles in Einstein-de Sitter cosmologies are consistent with a pure power law up to the highest density contrasts (10(exp 6)) accessible with our resolution. The low-density models show significant deviation from a power law above density contrasts approximately 10(exp 5). We interpret this curvature as reflecting the non-scale-invariant nature of the background cosmology in these models. These results are at the limit of our resolution and so should be tested in the future using simulations with larger numbers of particles. Such simulations will also provide insight on the broader problem of understanding, in a statistical sense, the full phase space structure of collapsed, cosmological halos.

Crone, Mary M.↗

Velocity and temperature profiles in near-critical nitrogen flowing past a horizontal flat plate

Boundary layer velocity and temperature profiles were measured for nitrogen near its thermodynamic critical point flowing past a horizontal flat plate. The results were compared measurements made for vertically upward flow. The boundary layer temperatures ranged from below to above the thermodynamic critical temperature. For wall temperatures below the thermodynamic critical temperature there was little variation between the velocity and temperature profiles in three orientations. In all three orientations the point of crossing into the critical temperature region is marked by a significant flattening of the velocity and temperature profiles and also a decrease in heat transfer coefficient.

Simoneau, R. J.↗

Flow Simulation of Solid Rocket Motors: Sub-Scale Air Flow Simulation of Port Flows - 2

The injection-flow issuing from a porous medium in the cold-flow simulation of internal port flows in solid rocket motors is characterized by a spatial instability termed pseudoturbulence that produces a rather non-uniform (lumpy) injection-velocity profile. The objective of this study is to investigate the interaction between the injection- and the developing axial-flows. The findings show that this interaction generally weakens the lumpy injection profile and affects the subsequent development of the axial flow. The injection profile is found to depend on the material characteristics, and the ensuing pseudoturbulence is a function of the injection velocity, the axial position and the distance from the porous wall. The flow transition (from laminar to turbulent) of the axial-flow is accelerated in flows emerging from smaller pores primarily due to the higher pseudoturbulence produced by the smaller pores in comparison to that associated with larger pores. In flows with rather uniform injection-flow profiles (weak or no pseudoturbulence), the axial and transverse velocity components in the porous duct are found to satisfy the sine/cosine analytical solutions derived from inviscid assumptions. The transition results from the present study are compared with previous results from surveyed literature, and detailed flow development measurements are presented in terms of the blowing fraction, and characterizing Reynolds numbers.

Yeh, Y. P.↗

Static and flyover noise measurements of an inverted profile exhaust jet

Tests using a TF30 mixed flow afterburning turbofan engine in an F-111 airplane were conducted to study the noise characteristics of an inverted velocity profile jet. Full-authority digital engine control allowed the inverted profile jet to be compared to a uniform jet of equal thrust statically and in flight. An exhaust velocity survey showed that the ratio of the outer to inner stream velocities was 1.37; therefore, only small noise reductions were expected. At static conditions, the inverted profile jet was approximately 3 decibels quieter than the uniform jet at peak noise angles. During a flyover it was approximately 1 decibel quieter.

Burcham, F. W., Jr.↗