SEARCH · Search NASA

Results for “aircraft sampling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

All sources NASA NTRS DOE OSTI

NASA NTRS1982

An incursion of dust in the southwestern United States from April 1980 eruptions of Mount St. Helens

An intrusion of volcanic dust occurred over the northern Mojave Desert, one month before the explosive eruption of 18 May 1980. Visibility was reduced to 15 to 30 miles during meteorological conditions that should have yielded a visibility in excess of 100 miles. This intrusion was documented by particle size distributions, scanning electron microscope analysis of Nuclepore filter samples, insolation measurements, observations by Navy and NASA aircraft, and meteorological data. No further incidents have been observed to date because of a lack of simultaneous volcanic activity with the particular wind patterns that existed in April. Therefore, under certain meteorological conditions, the desert of the southwestern United States could be significantly affected by volcanic ash from an eruption of Mount St. Helens.

Mathews, L. A.↗

NASA NTRS1986

Determination of the optical thickness of clouds from reflected solar radiation measurements

A procedure is presented for inferring cloud optical thickness from reflected solar radiation measurements. Asymptotic expressions are defined for the reflection and transmission functions of optically thick atmospheres, noting that the reflection function sensitivity to cloud optical thickness is highest with minimal surface albedo. Attention is also given to the dependence of the optical thickness on the cloud asymmetry factor. Sample results are provided from several high altitude aircraft flights to determine the reflection function of clouds.

King, M. D.↗

NASA NTRS1991

The Cl-36 in the stratosphere

Initial measurements of the cosmogenic radionuclide, Cl-36, in the lower stratosphere were made by accelerator mass spectrometry. Samples were obtained using the large volume LASL air sampling pods on a NASA WB-57F aircraft. Untreated (for collection of particulates only) and tetrabutyl ammonium hydroxide treated (for collection of particulates and HCl) IPC-1478 filters were flown on three flights in the lower stratosphere. Chlorine (Cl) and Cl compounds are important trace constituents for stratospheric chemistry, in particular with respect to O3 destruction. Stratospheric Cl chemistry has recently received increased attention with the observation of strong O3 depletion in the Antarctic winter vortex and in the weaker and more complex Arctic winter vortices. Cosmogenic (Cl-36) is produced by spallation reactions from Ar mainly in the stratosphere, and has had several applications as a geochemical tracer. The large amounts of Cl-36 introduced by nuclear weapon testing have been removed from the stratosphere by now, and measurements in the stratosphere to obtain cosmogenic production rates and concentration distributions is now possible. The use of cosmogenic Cl-36 as a tracer for stratospheric Cl chemistry and for stratospheric/tropospheric exchange processes is investigated. A first attempt to determine stratospheric and tropospheric production rates, the partitioning of Cl-36 among particulate and gaseous Cl compounds, and the respective inventories and removal rates is being made. Results from a flight at 13.7 km, 30-33 degrees N, 97-107 degrees W, and from a second flight at 17.7 km, 43-45-36 degrees N, 92-94 degrees W, for the untreated and treated filters respectively are presented.

Deck, Bruce↗

NASA NTRS1991

A 3-D upwind Euler solver for unstructured meshes

A three-dimensional finite-volume upwind Euler solver is developed for unstructured meshes. The finite-volume scheme solves for solution variables at vertices of the mesh and satisfies the integral conservation law on nonoverlapping polyhedral control volumes surrounding vertices of the mesh. The schene achieves improved solution accuracy by assuming a piecewise linear variation of the solution in each control volume. This improved spatial accuracy hinges heavily upon the calculation of the solution gradient in each control volume given pointwise values of the solution at vertices of the mesh. Several algorithms are discussed for obtaining these gradients. Details concerning implementation procedures and data structures are discussed. Sample calculations for inviscid Euler flow about isolated aircraft wings at subsonic and transonic speeds are compared with established Euler solvers as well as experiment.

Barth, Timothy J.↗

NASA NTRS1992

Multidisciplinary tailoring of hot composite structures

A computational simulation procedure is described for multidisciplinary analysis and tailoring of multilayered multimaterial hot composite engine structural components subjected to simultaneous multiple discipline-specific thermal, structural, vibration, and acoustic loadings including the effect of aggressive environments. The simulation is based on a 3D finite element analysis technique in conjunction with structural mechanics codes, thermal/acoustic analysis methods, and tailoring procedures. The integrated multidisciplinary simulation procedure is general-purpose including the coupled effects of nonlinearities in structure geometry, material, loading, and environmental complexities. The composite material behavior is assessed at all composite scales, i.e., the laminate/ply/constituents (fiber/matrix), via a nonlinear material characterization hygro-thermomechanical model. Sample tailoring cases exhibiting nonlinear material/loading/environmental behavior of aircraft engine fan blades, are presented. The various multidisciplinary loadings lead to different tailored designs, even those opposite of each other, as in the case of minimum material cost versus minimum structure weight and in the case of minimum vibration frequency versus minimum acoustic noise.

Singhal, Surendra N.↗

NASA NTRS1993

Multidisciplinary tailoring of hot composite structures

A computational simulation procedure is described for multidisciplinary analysis and tailoring of layered multi-material hot composite engine structural components subjected to simultaneous multiple discipline-specific thermal, structural, vibration, and acoustic loads. The effect of aggressive environments is also simulated. The simulation is based on a three-dimensional finite element analysis technique in conjunction with structural mechanics codes, thermal/acoustic analysis methods, and tailoring procedures. The integrated multidisciplinary simulation procedure is general-purpose including the coupled effects of nonlinearities in structure geometry, material, loading, and environmental complexities. The composite material behavior is assessed at all composite scales, i.e., laminate/ply/constituents (fiber/matrix), via a nonlinear material characterization hygro-thermo-mechanical model. Sample tailoring cases exhibiting nonlinear material/loading/environmental behavior of aircraft engine fan blades, are presented. The various multidisciplinary loads lead to different tailored designs, even those competing with each other, as in the case of minimum material cost versus minimum structure weight and in the case of minimum vibration frequency versus minimum acoustic noise.

Singhal, Surendra N.↗

NASA NTRS1992

An overview of the measurements of soil moisture and modeling of moisture flux in FIFE

Measurements of soil moisture and calculations of moisture transfer in the soil medium and at the air-soil interface were performed over a 15-km by 15-km test site during FIFE in 1987 and 1989. The measurements included intensive soil moisture sampling at the ground level and surveys at aircraft altitudes by several passive and active microwave sensors as well as a gamma radiation device.

Wang, J. R.↗

NASA NTRS1993

Meteorological analysis of the December 4-6 FIRE cirrus-2 case

During the period 4-6 December 1991, three distinct and separate cirrus cloud systems were observed to move over the FIRE Cirrus-II field site at Coffeyville (COF) in southeastern Kansas. Meteorological analyses of the first and third events are presented here. These cases were well-sampled by the regional rawinsonde network, highly instrumented aircraft, and extensive ground-based remote sensors at COF. Our analyses are primarily based on the rawinsonde observations. Unfortunately, the intervening event was not well-observed by the regional rawinsonde network.

Starr, David↗

NASA NTRS2004

Classification of Particle Shapes from Lidar Depolarization Ratios in Convective Ice Clouds Compared to in situ Observations During CRYSTAL-FACE

This manuscript describes a method to class@ cirrus cloud ice particle shape using lidar depolarization measurements as a basis for segregating different particle shape regimes. Measurements from the ER-2 Cloud Physics Lidar (CPL) system during CRYSTAL-FACE provide the basis for this work. While the CPL onboard the ER-2 aircraft was providing remote sensing measurements of cirrus clouds, the Cloud Particle Imager (CPI) onboard the WB-57 aircraft was flying inside those same clouds to sample particle sizes. The results of classifying particle shapes using the CPL data are compared to the in situ measurements made using the CPI , and there is found to be good agreement between the particle shape inferred from the CPL data and that actually measured by the CPI. If proven practical, application of this technique to spaceborne observations could lead to large-scale classification of cirrus cloud particle shapes.

Noel, Vincent↗

NASA NTRSDate not supplied

An MBSE Framework to Identify Regulatory Gaps for Electrified Transport Aircraft

A typical aircraft certification process consists of obtaining a type, production, airworthiness, and continued airworthiness certificates. During this process, a type certification plan is created that includes the intended regulatory operating environment, the proposed certification basis, means of compliance, and a list of documentation to show compliance. Earlier work by the authors demonstrated a model-based framework for the management of these certification artifacts for normal category airplanes. Presently, it is expanded and adapted to consider certification for transport category airplanes regulated under 14 CFR Part 25, providing clear transparency and traceability between the text of the regulations and imposed requirements, contextual information, and specified test activities. In particular, a capability to identify potential gaps in the applicability of regulations for novel architectures such as electrified aircraft is proposed. This capability, based on mismatches between the functional intent and the corresponding prescribed physical implementation, is developed. A sample implementation of the proposed capability is presented for a notional electrified powertrain aircraft architecture.

electrified transport aircraft↗

NASA NTRS1996

Propulsion Selection for 85kft Remotely Piloted Atmospheric Science Aircraft

This paper describes how a 3 stage turbocharged gasoline engine was selected to power NASA's atmospheric science unmanned aircraft now under development. The airplane, whose purpose is to fly sampling instruments through targeted regions of the upper atmosphere at the exact location and time (season, time of day) where the most interesting chemistry is taking place, must have a round trip range exceeding 1000 km, carry a payload of about 500 lb to altitudes exceeding 80 kft over the site, and be able to remain above that altitude for at least 30 minutes before returning to base. This is a subsonic aircraft (the aerodynamic heating and shock associated with supersonic flight could easily destroy the chemical species that are being sampled) and it must be constructed so it will operate out of small airfields at primitive remote sites worldwide, under varying climate and weather conditions. Finally it must be low cost, since less than $50 M is available for its development. These requirements put severe constraints on the aircraft design (for example, wing loading in the vicinity of 10 psf) and have in turn limited the propulsion choices to already-existing hardware, or limited adaptations of existing hardware. The only candidate that could emerge under these circumstances was a propeller driven aircraft powered by spark ignited (SI) gasoline engines, whose intake pressurization is accomplished by multiple stages of turbo-charging and intercooling. Fortunately the turbocharged SI powerplant, owing to its rich automotive heritage and earlier intensive aero powerplant development during WWII, enjoys in addition to its potentially low development costs some subtle physical advantages (arising from its near-stochiometric combustion) that may make it smaller and lighter than either a turbine engine or a diesel for these altitudes. Just as fortunately, the NASA/industry team developing this aircraft includes the same people who built multi-stage turbocharged SI powerplants for unmanned military spyplanes in the early 1980's. Now adapting hardware developed for reconaissance at 65-70 kft to the interests of atmospheric science at 80-90 kft, their efforts should yield an aero powerplant that pushes the altitude limits of subsonic air breathing propulsion.

Bents, David J.↗

DOE OSTI2020

Counterflow Virtual Impactor (CVI) Inlet Aboard Aircraft (INLETCVI-AIR) Instrument Handbook

The counterflow virtual impactor (CVI) inlet separates out and samples cloud elements via inertial impaction. Warm, dry, particle-free carrier gas of known composition is pumped to the tip of the inlet in the direction opposite of the flow of air. The flow lines of the incoming free stream air are split. Larger droplets and ice crystals suspended in the sample air have enough inertia to penetrate the counterflow and enter the sample flow, while smaller, unactivated particles follow the streamlines of the air flowing around the inlet’s tip (Noone et al. 1988). The instrument is capable of sampling cloud elements as a function of cut size by changing the velocity of counterflow at the probe tip. The CVI cut size is usually defined as a diameter of a smallest particle for which penetration rate is 50%. For the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) user facilityGulfstream-159 aircraft’s CVI inlet, that value is usually around 13 microns. The dry heated air, normally used as the carrier gas, also serves to evaporate water from the hydrometeor, leaving the residuals to be sampled by in-cabin aerosol instrumentation. The number concentration of the droplet residue in the CVI sample line is usually increased with respect to corresponding cloud element number concentration. The CVI performance as a concentrator is usually described via CVI enhancement factor, which is a conversion factor between ambient volumetric concentration (not adjusted to standard temperature and pressure) and volumetric concentration in the CVI sample line.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS1972

An integrated computer system for preliminary design of advanced aircraft.

A progress report is given on the first phase of a research project to develop a system of Integrated Programs for Aerospace-Vehicle Design (IPAD) which is intended to automate to the largest extent possible the preliminary and detailed design of advanced aircraft. The approach used is to build a pilot system and simultaneously to carry out two major contractual studies to define a practical IPAD system preparatory to programing. The paper summarizes the specifications and goals of the IPAD system, the progress to date, and any conclusion reached regarding its feasibility and scope. Sample calculations obtained with the pilot system are given for aircraft preliminary designs optimized with respect to discipline parameters, such as weight or L/D, and these results are compared with designs optimized with respect to overall performance parameters, such as range or payload.

Fulton, R. E.↗

NASA NTRS1982

Measurement of speech levels in the presence of time varying background noise

Short-term speech level measurements which could be used to note changes in vocal effort in a time varying noise environment were studied. Knowing the changes in speech level would in turn allow prediction of intelligibility in the presence of aircraft flyover noise. Tests indicated that it is possible to use two second samples of speech to estimate long term root mean square speech levels. Other tests were also performed in which people read out loud during aircraft flyover noise. Results of these tests indicate that people do indeed raise their voice during flyovers at a rate of about 3-1/2 dB for each 10 dB increase in background level. This finding is in agreement with other tests of speech levels in the presence of steady state background noise.

Pearsons, K. S.↗

NASA NTRS2000

Passive Microwave Observations of Hurricanes Bonnie, Danielle, and Georges

During the 1998 hurricane season, three hurricanes were sampled by the Advanced Microwave Precipitation Radiometer (AMPR) which was flown aboard the National Aeronautics and Space Administration (NASA) ER-2 high altitude aircraft during the Third Convection And Moisture EXperiment (CAMEX-3). The ER-2 aircraft was deployed from Patrick Air Force Base, Florida for hurricane missions over the Atlantic Basin and Gulf of Mexico between 6 August - 23 September. Hurricanes Bonnie, Danielle and Georges were each sampled multiple times during several subsequent aircraft missions. The passive microwave observations of these hurricanes collected by the AMPR at 10.7, 19.35, 37.1, and 85.5 GHz frequencies will be presented to explain differences in precipitation features of the hurricanes. In particular, the relationship of the passive microwave signatures of precipitation-sized ice to vertical updraft strength will be examined as a possible indicator of future convective intensity. Correlating aircraft radar information will also be examined to provide further insight.

Hood, Robbie E.↗

NASA NTRS2019

NASA SIERRA-B Capability Returns to Flight

The Sensor Integrated Evaluation Remote Research Aircraft (SIERRA-B) is a medium-class, unmanned aircraft system (UAS) that can perform remote sensing and atmospheric sampling missions in isolated and often inaccessible regions, such as over mountain ranges, the open ocean, or the Arctic. This capability developed by NASA Ames Research Center is a unique way for Scientists and Engineers to gather important Earth science data as well as perform flight research using an innovative, safe, and cost-effective aerial platform. This poster describes the aircraft system architecture, capabilities, and provides an overview of current payloads and mission concepts.

Cahill, S.↗

NASA NTRS1978

Global and regional N2O measurements

Real-time N2O measurements have been made in situ at the South Pole, Antarctica, north and south of the equator from on board the Alpha Helix and over the Pacific Ocean on several aircraft flights from the U.S. to New Zealand, Australia and 90 deg S. In addition, an automated EC-GC has been operated for the past year intermittently monitoring N2O in surface air at a rural site in the wheatlands of eastern Washington state. The data obtained are consistent and in agreement with the data obtained from the analyses of a large number of samples collected both from ground stations and a variety of aircraft flights made in the southern and northern hemisphere. The observed global data show no interhemispheric differences. The present concentration of N2O in the troposphere is measured to be 330 + or - 3 ppbv. Its vertical distribution in the troposphere is very uniform. A small decrease (2-3 percent) across the tropopause is characteristically observed in the high-altitude flights.

Rasmussen, R. A.↗

NASA NTRS2007

Overview of Aircraft Noise Prediction Tools Assessment

The acoustic assessment task for both the Subsonic Fixed Wing and the Supersonic projects under NASA s Fundamental Aeronautics Program was designed to assess the current state-of-the-art in noise prediction capability and to establish baselines for gauging future progress. The documentation of our current capabilities included quantifying the differences between predictions of noise from computer codes and measurements of noise from experimental tests. Quantifying the accuracy of both the computed and experimental results further enhanced the credibility of the assessment. This presentation gives sample results from codes representative of NASA s capabilities in aircraft noise prediction at the system level and at the component level. These include semi-empirical, statistical, analytical, and numerical codes. An example of system level results is shown for an aircraft. Component level results are shown for airframe flaps and landing gear, for jet noise from a variety of nozzles, and for broadband fan noise. Additional results are shown for modeling of the acoustic behavior of duct acoustic lining and the attenuation of sound in lined ducts with flow.

Dahl, Milo D.↗