SEARCH · Search NASA

Results for “algorithm”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

All sources NASA NTRS DOE OSTI

NASA NTRS1979

A fast, conservative algorithm for solving the transonic full-potential equation

A fast, fully implicit approximate factorization (AF) algorithm designed to solve the conservative transonic full-potential equation in either two or three dimensions is described. The algorithm uses an upwind bias of the density coefficient for stability in supersonic regions. This provides an effective upwind difference of the streamwise terms for any orientation of the velocity vector (i.e., 'rotated differencing'), and thereby greatly enhances the reliability of the present algorithm. A numerical transformation is used to establish an arbitrary body-fitted finite-difference mesh. Computed results for both airfoils and simplified wings demonstrate substantial improvement in convergence speed for the new algorithm relative to standard successive-line overrelaxation algorithms.

Holst, T. L.↗

NASA NTRS1980

On the performance of explicit and implicit algorithms for transient thermal analysis

The status of an effort to increase the efficiency of calculating transient temperature fields in complex aerospace vehicle structures is described. The advantages and disadvantages of explicit and implicit algorithms are discussed. A promising set of implicit algorithms, known as the GEAR package is described. Four test problems, used for evaluating and comparing various algorithms, have been selected and finite element models of the configurations are discribed. These problems include a space shuttle frame component, an insulated cylinder, a metallic panel for a thermal protection system and a model of the space shuttle orbiter wing. Calculations were carried out using the SPAR finite element program, the MITAS lumped parameter program and a special purpose finite element program incorporating the GEAR algorithms. Results generally indicate a preference for implicit over explicit algorithms for solution of transient structural heat transfer problems when the governing equations are stiff. Careful attention to modeling detail such as avoiding thin or short high-conducting elements can sometimes reduce the stiffness to the extent that explicit methods become advantageous.

Adelman, H. M.↗

NASA NTRS1981

Scaled Runge-Kutta algorithms for handling dense output

Low order Runge-Kutta algorithms are developed which determine the solution of a system of ordinary differential equations at any point within a given integration step, as well as at the end of each step. The scaled Runge-Kutta methods are designed to be used with existing Runge-Kutta formulas, using the derivative evaluations of these defining algorithms as the core of the system. For a slight increase in computing time, the solution may be generated within the integration step, improving the efficiency of the Runge-Kutta algorithms, since the step length need no longer be severely reduced to coincide with the desired output point. Scaled Runge-Kutta algorithms are presented for orders 3 through 5, along with accuracy comparisons between the defining algorithms and their scaled versions for a test problem.

Horn, M. K.↗

NASA NTRS1981

A diagonal form of an implicit approximate-factorization algorithm

A modification of an implicit approximate-factorization finite-difference algorithm applied to partial differential equations is presented. This algorithm is applied to the two- and three-dimensional Euler equations in general curvilinear coordinates. The modification transforms the coupled system of equations into an uncoupled diagonal form that requires less computational work. For steady-state applications, the resulting diagonal algorithm retains the stability and accuracy characteristics of the original algorithm. The diagonal algorithm reduces the storage requirement of the implicit solution process and therefore has an important effect on the application of implicit finite-difference schemes to vector processors. Results are presented for realistic two-dimensional transonic flow fields about airfoils. Computation costs are reduced to 24-34%.

Pulliam, T. H.↗

NASA NTRS1982

Scaled Runge-Kutta algorithms for treating the problem of dense output

A set of scaled Runge-Kutta algorithms for the third- through fifth-orders are developed to determine the solution at any point within the integration step at a relatively small increase in computing time. Each scaled algorithm is designed to be used with an existing Runge-Kutta formula, using the derivative evaluations of the defining algorithm along with an additional derivative evaluation (or two). Third-order, scaled algorithms are embedded within the existing formulas at no additional derivative expense. Such algorithms can easily be adopted to generate interpolating polynomials (or dependent variable stops) efficiently.

Horn, M. K.↗

NASA NTRS1981

A family of solution algorithms for nonlinear structural analysis based on relaxation equations

A family of hierarchical algorithms for nonlinear structural equations are presented. The algorithms are based on the Davidenko-Branin type homotopy and shown to yield consistent hierarchical perturbation equations. The algorithms appear to be particularly suitable to problems involving bifurcation and limit point calculations. An important by-product of the algorithms is that it provides a systematic and economical means for computing the stepsize at each iteration stage when a Newton-like method is employed to solve the systems of equations. Some sample problems are provided to illustrate the characteristics of the algorithms.

Park, K. C.↗

NASA NTRS1982

Iterative algorithms for large sparse linear systems on parallel computers

Algorithms for assembling in parallel the sparse system of linear equations that result from finite difference or finite element discretizations of elliptic partial differential equations, such as those that arise in structural engineering are developed. Parallel linear stationary iterative algorithms and parallel preconditioned conjugate gradient algorithms are developed for solving these systems. In addition, a model for comparing parallel algorithms on array architectures is developed and results of this model for the algorithms are given.

Adams, L. M.↗

NASA NTRS1983

Basis for spectral curvature algorithms in remote sensing of chlorophyll

A simple, empirically derived algorithm for estimating oceanic chlorophyll concentrations from spectral radiances measured by a low-flying spectroradiometer has proved highly successful in field experiments in 1980-82. The sensor used was the Multichannel Ocean Color Sensor, and the originator of the algorithm was Grew (1981). This paper presents an explanation for the algorithm based on the optical properties of waters containing chlorophyll and other phytoplankton pigments and the radiative transfer equations governing the remotely sensed signal. The effects of varying solar zenith, atmospheric transmittance, and interfering substances in the water on the chlorophyll algorithm are characterized, and applicability of the algorithm is discussed.

Campbell, J. W.↗

NASA NTRS1982

Robustness of adaptive control algorithms in the presence of unmodeled dynamics

This paper reports the outcome of an exhaustive analytical and numerical investigation of stability and robustness properties of a wide class of adaptive control algorithms in the presence of unmodeled dynamics and output disturbances. The class of adaptive algorithms considered are those commonly referred to as model-reference adaptive control algorithms, self-tuning controllers, and dead-beat adaptive controllers; they have been developed for both continuous-time systems and discrete-time systems. The existing adaptive control algorithms have been proven to be globally asymptotically stable under certain assumptions, the key ones being (1) that the number of poles and zeroes of the unknown plant are known, and (2) that the primary performance criterion is related to good command following. These theoretical assumptions are too restrictive from an engineering point of view. Real plants always contain unmodeled high-frequency dynamics and small delays, and hence no upper bound on the number of the plant poles and zeroes exists. Also real plants are always subject to unmeasurable output additive disturbances, although these may be guide small. Hence, it is important to critically examine the stability robustness properties of the existing adaptive algorithms when some of the theoretical assumptions are removed; in particular, their stability and performance properties in the presence of unmodeled dynamics and output disturbances. Previously announced in STAR as N83-16061

Rohrs, C. E.↗

NASA NTRS1985

Vectorizable multigrid algorithms for transonic flow calculations

The analysis and incorporation into a multigrid scheme of several vectorizable algorithms are discussed. Von Neumann analyses of vertical line, horizontal line, and alternating direction ZEBRA algorithms were performed; and the results were used to predict their multigrid damping rates. The algorithms were then successfully implemented in a transonic conservative full-potential computer program. The convergence acceleration effect of multiple grids is shown and the convergence rates of the vectorizable algorithms are compared to the convergence rates of standard successive line overrelaxation (SLOR) algorithms.

Melson, N. D.↗

NASA NTRS1985

Analysis of estimation algorithms for CDTI and CAS applications

Estimation algorithms for Cockpit Display of Traffic Information (CDTI) and Collision Avoidance System (CAS) applications were analyzed and/or developed. The algorithms are based on actual or projected operational and performance characteristics of an Enhanced TCAS II traffic sensor developed by Bendix and the Federal Aviation Administration. Three algorithm areas are examined and discussed. These are horizontal x and y, range and altitude estimation algorithms. Raw estimation errors are quantified using Monte Carlo simulations developed for each application; the raw errors are then used to infer impacts on the CDTI and CAS applications. Applications of smoothing algorithms to CDTI problems are also discussed briefly. Technical conclusions are summarized based on the analysis of simulation results.

Goka, T.↗

NASA NTRS1984

A SAR correlation algorithm which accommodates large-range migration

This paper presents an algorithm for azimuth correlation of synthetic aperture radar (SAR) data with extraordinarily large-range migration which cannot be accommodated by the existing frequency domain interpolation approach used in current Seasat SAR processing. A mathematical model is provided for the SAR range-correlated point-target response both in the spatial and frequency domains. A simple and efficient processing algorithm derived from the exact two-dimensional correlation algorithm is given. This algorithm enables azimuth correlation by two cascaded one-dimensional correlation steps. The first step is to transform the range-correlated SAR data into the frequency domain in azimuth, followed by a newly developed range convolution filter to correct the range-dispersed spectrum of the range-correlated point-target response (RCPTR). The second step is the frequency-domain range migration correction approach for the azimuth compression. Simulation results provided here indicate that this processing algorithm yields a satisfactory compressed impulse response for SAR data with large-range migration whereas previous methods were subject to a broadening of the impulse response along range.

Jin, M. Y.↗

NASA NTRS1983

SAR correlation technique - An algorithm for processing data with large range walk

This paper presents an algorithm for synthetic aperture radar (SAR) azimuth correlation with extraneously large range migration effect which can not be accommodated by the existing frequency domain interpolation approach used in current SEASAT SAR processing. A mathematical model is first provided for the SAR point-target response in both the space (or time) and the frequency domain. A simple and efficient processing algorithm derived from the hybrid algorithm is then given. This processing algorithm enables azimuth correlation by two steps. The first step is a secondary range compression to handle the dispersion of the spectra of the azimuth response along range. The second step is the well-known frequency domain range migration correction approach for the azimuth compression. This secondary range compression can be processed simultaneously with range pulse compression. Simulation results provided here indicate that this processing algorithm yields a satisfactory compressed impulse response for SAR data with large range migration.

Jin, M.↗

NASA NTRS1986

Design considerations for flight test of a fault inferring nonlinear detection system algorithm for avionics sensors

The modifications to the design of a fault inferring nonlinear detection system (FINDS) algorithm to accommodate flight computer constraints and the resulting impact on the algorithm performance are summarized. An overview of the flight data-driven FINDS algorithm is presented. This is followed by a brief analysis of the effects of modifications to the algorithm on program size and execution speed. Significant improvements in estimation performance for the aircraft states and normal operating sensor biases, which have resulted from improved noise design parameters and a new steady-state wind model, are documented. The aircraft state and sensor bias estimation performances of the algorithm's extended Kalman filter are presented as a function of update frequency of the piecewise constant filter gains. The results of a new detection system strategy and failure detection performance, as a function of gain update frequency, are also presented.

Caglayan, A. K.↗

NASA NTRS1985

ISCCP cloud algorithm intercomparison

Research related to the International Satellite Cloud Climatology Project (ISCCP) began with a pilot study initiated in late 1981 to evaluate currently available cloud analysis algorithms. Other objectives of this study are related to a test of the effects of data volume compression schemes and the design of the operational algorithms for ISCCP. The present paper summarizes the pilot study by focusing on the most fundamental step of any cloud algorithm, that of cloud detection. An outline is provided of the objectives and limitations of the pilot study, and a description is given of the criteria used to design the operational analysis algorithm. Attention is given to the pilot study data set, a cloud detection intercomparison, a cloud analysis, and ISCCP cloud algorithm design.

Rossow, W. B.↗

NASA NTRS1986

Design considerations for flight test of a fault inferring nonlinear detection system algorithm for avionics sensors

This paper summarizes the modifications made to the design of a fault inferring nonlinear detection system (FINDS) algorithm to accommodate flight computer constraints and the resulting impact on the algorithm performance. An overview of the flight data-driven FINDS algorithm is presented. This is followed by a brief analysis of the effects of modifications to the algorithm on program size and execution speed. Significant improvements in estimation performance for the aircraft states and normal operating sensor biases, which have resulted from improved noise design parameters and a new steady-state wind model, are documented. The aircraft state and sensor bias estimation performances of the algorithm's extended Kalman filter are presented as a function of update frequency of the piecewise constant filter gains. The results of a new detection system strategy and failure detection performance, as a function of an update frequency, are also presented.

Caglayan, A. K.↗

NASA NTRS1986

A new algorithm for microwave delay estimation from water vapor radiometer data

A new algorithm has been developed for the estimation of tropospheric microwave path delays from water vapor radiometer (WVR) data, which does not require site and weather dependent empirical parameters to produce high accuracy. Instead of taking the conventional linear approach, the new algorithm first uses the observables with an emission model to determine an approximate form of the vertical water vapor distribution which is then explicitly integrated to estimate wet path delays, in a second step. The intrinsic accuracy of this algorithm has been examined for two channel WVR data using path delays and stimulated observables computed from archived radiosonde data. It is found that annual RMS errors for a wide range of sites are in the range from 1.3 mm to 2.3 mm, in the absence of clouds. This is comparable to the best overall accuracy obtainable from conventional linear algorithms, which must be tailored to site and weather conditions using large radiosonde data bases. The new algorithm's accuracy and flexibility are indications that it may be a good candidate for almost all WVR data interpretation.

Robinson, S. E.↗

NASA NTRS1987

An analysis of redundancy management algorithms for asynchronous fault tolerant control systems

Redundancy management algorithms, commonly referred to as voters, are algorithms used in fault-tolerant control systems to vote on incoming redundant data, isolate bad signals, and output a single good value. In a synchronous environment, this algorithm is a straightforward signal-to-signal comparison with relatively low complexity. The technology of asynchronous control systems, recently realized in the Ultrareliable Fault Tolerant Control System research program at NASA Ames Research Center, requires more complex algorithms for fault detection and signal selection. A variety of algorithms used for this process, a means of testing them, and their basic performance under a simulated environment of the ultrareliable fault-tolerant control system are presented.

Davis, Gloria J.↗