Search NASA⌕ Search

SEARCH · Search NASA

Results for “altimeter”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

The analysis of GEOS-3 altimeter data in the Tasman and Coral seas

A technique was developed for preprocessing GEOS-3 altimetry data to establish a model of the regional sea surface. The algorithms developed models for a 35,000,000 sq km area with an internal precision of + or - 1 m. There were discrepancies between the sea surface model so obtained and GEM6 based geoid profiles with wavelengths of approximately 2500 km and amplitudes of up to 5 m in this region. The amplitudes were smaller when compared with GEM10-based geoid determinations. However, the comparison of 14 pairs of overlapping passes in the region indicated altimeter resolution of the + or - 25 cm level if the wavelength corresponding to the Nyquist frequency were 30 km. The spectral analysis of such comparisons indicated the existence of significant signal strength in the discrepancies after least squares fitting, with wavelengths in excess of 200 km.

Mather, R. S.↗

Engineering study for pallet adapting the Apollo laser altimeter and photographic camera system for the Lidar Test Experiment on orbital flight tests 2 and 4

A Laser Altimeter and Mapping Camera System was included in the Apollo Lunar Orbital Experiment Missions. The backup system, never used in the Apollo Program, is available for use in the Lidar Test Experiments on the STS Orbital Flight Tests 2 and 4. Studies were performed to assess the problem associated with installation and operation of the Mapping Camera System in the STS. They were conducted on the photographic capabilities of the Mapping Camera System, its mechanical and electrical interface with the STS, documentation, operation and survivability in the expected environments, ground support equipment, test and field support.

Kuebert, E. J.↗

Remote sensing of Gulf Stream using GEOS-3 radar altimeter

Radar altimeter measurements from the GEOS-3 satellite to the ocean surface indicated the presence of expected geostrophic height differences across the the Gulf Stream. Dynamic sea surface heights were found by both editing and filtering the raw sea surface heights and then referencing these processed data to a 5 minute x 5 minute geoid. Any trend between the processed data and the geoid was removed by subtracting out a linear fit to the residuals in the open ocean. The mean current velocity of 107 + or - 29 cm/sec calculated from the dynamic heights for all orbits corresponded with velocities obtained from hydrographic methods. Also, dynamic topographic maps were produced for August, September, and October 1975. Results pointed out limitations in the accuracy of the geoid, height anomaly deteriorations due to filtering, and lack of dense time and space distribution of measurements.

Leitao, C. D.↗

ALT space shuttle barometric altimeter altitude analysis

The accuracy was analyzed of the barometric altimeters onboard the space shuttle orbiter. Altitude estimates from the air data systems including the operational instrumentation and the developmental flight instrumentation were obtained for each of the approach and landing test flights. By comparing the barometric altitude estimates to altitudes derived from radar tracking data filtered through a Kalman filter and fully corrected for atmospheric refraction, the errors in the barometric altitudes were shown to be 4 to 5 percent of the Kalman altitudes. By comparing the altitude determined from the true atmosphere derived from weather balloon data to the altitude determined from the U.S. Standard Atmosphere of 1962, it was determined that the assumption of the Standard Atmosphere equations contributes roughly 75 percent of the total error in the baro estimates. After correcting the barometric altitude estimates using an average summer model atmosphere computed for the average latitude of the space shuttle landing sites, the residual error in the altitude estimates was reduced to less than 373 feet. This corresponds to an error of less than 1.5 percent for altitudes above 4000 feet for all flights.

Killen, R.↗

An atlas of GEOS-3 radar altimeter data for data buoy comparison studies

An atlas is compiled to identify times and dates when GEOS-3 altimeter data was taken in the vicinity of data buoys. The time period covered is from GEOS launch to April 9, 1978. Two buffer areas are considered for each of the various buoy locations to determine the simultaneity of GEOS and buoy data. The two buffer areas are ? or - 0.25 degrees and ? or - 1 degree.

Stanley, H. R.↗

Ocean wave heights measured by a high resolution pulse-limited radar altimeter

Data on significant wave height (SWH) taken with an airborne (2-3.5 km altitude) X-band 1-ns pulse-limited radar altimeter under various wind and sea conditions are interpreted. A heuristic discussion of the return pulse shape and the method of extracting the SWH is followed by a demonstration that the mean of the resulting SWH values is in agreement with other, independent measurements. The scatter of the SWH values is large compared to the estimates based on the statistical fluctuations in the radar signal. The discrepancy is resolved by showing that the radar is actually observing small-scale variations in the sea-surface standard deviation caused by the small number of ocean wavelengths illuminated.

Walsh, E. J.↗

Large-scale Gulf Stream frontal study using GEOS 3 radar altimeter data

From data obtained by the GEOS 3 radar altimeter, sea surface heights are found by both editing and filtering the raw sea surface height measurements and then referencing these processed data to a 5 foot by 5 foot geoid. Any trend between the processed data and the geoid is removed by subtracting out a linear fit to the residuals in the open ocean. Data from individual passes are further processed by applying a minimum variance technique at the subsatellite crossing points to produce surface topography maps for the 6 months and an overall mean map which reveal important details about the Gulf Stream system. The differences between the monthly mean and the overall mean are calculated for each of the 6 months to show the temporal and spatial changes of the Gulf Stream front and spawned eddies. The standard deviation map is even more informative and shows preferred locations of Gulf Stream meanders.

Huang, N. E.↗

Analysis and geological interpretation of gravity data from GEOS-3 altimeter

A number of detailed gravimetric geoids of portions of the world's oceans from marine gravity measurements were constructed. The geoids were constructed by computing 1 x 1 deg or 10 x 10 deg averages of free-air anomaly data and subtracting these values from currently used satellite derived Earth models. The resulting difference gravity anomalies are then integrated over a sphere using a simplified form of Stoke's equation to obtain a difference geoid. This difference geoid is added to the satellite derived model to obtain a 1 x 1 deg or 10 x 10 deg total gravimetric geoid. The geoid undulations are studied by comparison of the altimeter measurements with the morphology of the ocean floor. Utilizing a combination of altimetry data, gravity and seismic reflection data, geophysical models of the earth can be constructed.

Talwani, M.↗

Interpretation of altimeter data

Two methods are used to interpret the whole range of signals contained in the Geos 3 altimeter data. They each address a different class of events and thus complement each other in their ability to provide information on the state of convection in the earth's mantle. The long wavelength section of the spectrum yields information on the depth of convection cells and the viscosity variations inside those cells through a study of the variations of the admittance as a function of wavelength. The short wavelength section of the spectrum provides information on the evolution of the lithosphere, considered as a thin elastic plate, by studying its response to loads at several points in its evolution. The variation of the flexural rigidity with age is obtained from that study.

Roufosse, M. C.↗

Real-time determination of geophysical parameters from a multibeam altimeter

Satellite radar altimeters flown aboard Skylab, GEOS-3 and Seasat-1 have provided a wealth of information on oceanic processes, ice dynamics and geodesy. This paper describes satellite altimetry in its present state and forecasts its future. A brief review of present capability to measure altitude, significant wave height, wind, and current is given. Near term and long range applications are used to indicate desirable technical improvements and an evolutionary plan is presented to develop a sensor to meet future needs. The plan shows a progression from the presently available single-beam terrain profiler to a multibeamed profiling system in the near future which could measure large scale surface slopes without knowing the precise satellite orbit. Ultimately a system would be developed that provides images of height, reflectivity, and target motion. Some of this future system is vividly illustrated by data obtained with the WFC airborne Surface Contour Radar.

Mcgoggan, J. T.↗

Detailed 1 x 1 deg gravimetric Indian Ocean geoid and comparison with GEOS-3 radar altimeter geoid profiles

A new set of 1 x 1 deg mean free-air anomalies in the Indian Ocean is determined on the basis of previously published free-air anomaly maps (Talwani and Kahle, 1975) and the most recent Lamont surface ship gravity measurements. The data are then used to compute a (total) 1 x 1 deg gravimetric Indian Ocean geoid. The computation is carried out by combining the Goddard Space Flight Center (GSFC) GEM-6 geoid and a difference geoid that corresponds to the differences between the set of 1 x 1 deg surface gravity values and the GEM-6 gravity anomalies. The difference geoid is highest over the Madagascar Ridge (+20 m) and lowest over the Timor Trough (-30 m). The total geoid is compared with GEOS-3 radar altimeter-derived geoid profiles, and geophysical implications are discussed.

Kahle, H.-G.↗

Satellite altimeter measurements of sea state - An algorithm comparison

Six algorithms for extracting significant wave height from Geos 3 altimeter data have been compared using simulated Geos 3 data for a single long pass including a variety of sea states and for short segments in the vicinity of NOAA data buoys. The study included algorithms reported by Walsh (1979), Rufenach and Alpers (1978), Gower (1979), Godbey (1965), Fedor (1978) and a real-time model (Miller and Hayne, 1972). Individual differences in results obtained by the algorithms were small, and calculations were found to be in good agreement with surface truth data.

Fedor, L. S.↗

On orbital fitting with altimeter data

Using altimeter data from a single pass, orbital fiting of these data is investigated. The stability problems of this special kind of short are method as well as the problem in the case of a mean Keplerian ellipse are discussed in detail. It is shown that short periodic perturbations can influence the size of the eccentricity of the satellite orbit computed from these data. In this way the desired result, the corrections of d zeta to the geoidal undulations, may be falsified.

Lelgemann, D.↗

Determining sea-ice boundaries and ice roughness using GEOS-3 altimeter data

The GEOS-3 satellite and radar altimeter instrumentation are described, detailing the ice boundary discrimination technique utilized and presenting an analyses of the GEOS-3 data with respect to satellite visual and IR imagery. A brief description of the GEOS-3 real time data system is also given.

Dwyer, R. E.↗

GEOS-3 radar altimeter study for the South Atlantic Bight

Three years of radar altimeter data from GEOS-3 for the South Atlantic Bight were processed. Mean monthly topographic maps were produced which estimate geostrophic flow in the region. Statistical distribution of the surface wind speed and significant wave height as a function of both space and time are presented.

Leitao, C. D.↗

Variations in Transport Derived from Satellite Altimeter Data over the Gulf Stream

Variations in total change of sea surface height (delta h) across the Gulf Stream are observed using Seasat radar altimeter data. The sea surface height is related to transport within the stream by a two layer model. Variations in delta h are compared with previously observed changes in transport found to increase with distance downstream. No such increase is apparent since the satellite transports show no significant dependence on distance. Though most discrepancies are less than 50 percent, a few cases differ by about 100 percent and more. Several possible reasons for these discrepancies are advanced, including geoid error, but only two oceanographic contributions to the variability are examined, namely, limitations in the two layer model and meanders in the current. It is concluded that some of the discrepancies could be explained as changes in the density structure not accounted for by the two layer model.

Molinelli, Eugene↗

Seasat altimeter observations of dynamic topography in the Gulf Stream region

A straightforward approach to altimeter data analysis in the Gulf Stream system is presented, using a detailed geoid model to remove the gravitational component. The resulting sea surface height profiles compare remarkably well with independent oceanographic observations. Specific features such as cold rings, warm rings, and no anomaly regions are analyzed and it is shown that known positions of cyclonic and anticyclonic rings correspond with depressions and elevations, respectively, with amplitudes as large as 95 cm. The apparent fluctuation of the Gulf Stream is indicated by the results, as in the finding that on time scales of a few days, surface transport indicated by the sea surface height difference across the stream varied by nearly 30%

Cheney, R. E.↗

Precision orbit analyses in support of the Seasat altimeter experiment

It is noted that major improvements have been made in the Goddard Space Flight Center (GSFC) geodynamic models for Seasat. It is pointed out that the dominant error source in Seasat ephemeris computation is currently the uncertainty in modeling the earth's gravity field. Attention is also given to significant errors arising from atmospheric drag and solar radiation pressure modeling. It is noted that a comparison of GSFC and Naval Surface Weapons Center (NSWC) Seasat ephemerides indicate the presence of an unexplained difference of about 4 m in the location of the center of mass along the Z axis. This difference is consistent with that obtained with earlier geoid and station coordinated comparisons performed by other investigators. It is expected that future combinations of Seasat and GEOS-3 altimeter data, together with laser and Unified S-Band tracking data, will ultimately produce a gravity field which allows computations of a global Seasat ephemeris with an rms radial accuracy of about 50 cm.

Marsh, J. G.↗