SEARCH · Search NASA

Results for “cathode”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

All sources NASA NTRS DOE OSTI

DOE OSTI2022

Removal of Surface Carbonate from Lithium-Ion Battery Cathode Materials via Vapor-Phase Fluorination

Herein, ultrathin metal-fluoride barrier coatings on the surface of lithium-ion battery (LIB) cathodes can improve cycling stability and prevent corrosion by acidic byproducts in the electrolyte. Atomic layer deposition (ALD) is an effective method to deposit ultrathin metal fluoride coatings on LIB cathodes. Although numerous studies have demonstrated the benefit of ALD metal fluoride coatings to LIB performance, comparatively few works have examined the effect of individual ALD precursors on the cathode surface. This paper uses X-ray photoelectron spectroscopy (XPS) measurements to elucidate the surface chemical changes on LIB cathode material surfaces upon exposure to the ALD metal fluoride precursor, hydrogen fluorine pyridine (HFPy). We found a decrease in surface carbonate and an increase in surface fluoride after HFPy exposure suggesting the conversion of lithium carbonate (Li 2 CO 3 ) to lithium fluoride (LiF). This conversion is desirable given that Li 2 CO 3 degrades LIB performance, whereas LiF provides an excellent physio-chemical barrier against chemical attack during cycling. Scanning transmission electron microscopy, X-ray energy dispersive spectroscopy, and XPS measurements following HFPy exposure to Li 2 CO 3 powder revealed the formation of a conformal LiF shell around the Li 2 CO 3 particles. Finally, we confirmed the complete conversion of similar to 7 nm ALD Li 2 CO 3 films on silicon from HFPy exposure using XPS and spectroscopic ellipsometry. The elimination of problematic Li 2 CO 3 from LIB cathode surfaces and conversion into a protective LiF coating via a single precursor vapor treatment may provide a cost-effective method for enhancing LIB performance.

25 ENERGY STORAGE↗

DOE OSTI2024

Multinonmetal-Doped V 2 O 5 Nanocomposites for Lithium-Ion Battery Cathodes

Lithium-ion batteries (LIBs) are critical for portable electronics and electric vehicles, demanding higher energy density to meet increasing energy storage needs. Current commercial cathode materials, such as LiFePO 4 and LiCoO 2 , are limited by a single electron transfer, restricting their energy density. Vanadium pentoxide (V 2 O 5 ) emerges as a promising high-capacity cathode due to its high theoretical capacity of 443 mA h g –1 with three Li storage capacities, significantly surpassing conventional materials. However, the practical application of V 2 O 5 is hindered by a large structural evolution and rapid capacity fading during full lithium intercalation. Here, this study introduces a multinonmetal doping (MNM) strategy to enhance V 2 O 5 cathodes by incorporating all-nonmetal dopants (B, P, and Si) and graphene (G). MNM-V 2 O 5 -G exhibits increased surface oxygen defects, improving charge transfer kinetics and thus enhancing the rate performance and cycling stability. Our results provide valuable insights into the role of surface oxygen defects in stabilizing V 2 O 5 with element doping. This research highlights the potential of multinonmetal doping to improve LIB cathode materials, offering a promising pathway for design of high-energy-density V 2 O 5 cathodes and advancing the development of next-generation energy storage solutions.

25 ENERGY STORAGE↗

DOE OSTI2020

Rational Designed Mixed-Conductive Sulfur Cathodes for All-Solid-State Lithium Batteries

All-solid-state lithium–sulfur batteries (ASSLSBs) hold great promise for safe and high-energy-density energy storage. However, developing high-performance sulfur cathodes has been proven difficult due to low electronic and ionic conductivities and large volume change of sulfur during charge and discharge. Here, we reported an approach to synthesize sulfur cathodes with a mixed electronic and ionic conductivity by infiltrating a solution consisting of Li 3 PS 4 (LPS) solid electrolyte and S active material into a mesoporous carbon (CMK-3). This approach leads to a uniform dispersion of amorphous Li 3 PS 7 (L 3 PS) catholyte in an electronically conductive carbon matrix, enabling high and balanced electronic/ionic conductivities in the cathode composite. The inherent porous structure of CMK-3 also helps to accommodate the strain/stress generated during the expansion and shrinkage of the active material. In sulfide-based all-solid-state batteries with Li metal as the anode, this cathode composite delivered a high capacity of 1025 mAh g –1 after 50 cycles at 60 °C at 1/8C. This work highlights the important role of high and balanced electronic and ionic conductivities in developing high-performance sulfur cathodes for ASSLSBs.

25 ENERGY STORAGE↗

DOE OSTI2022

High Nickel and No Cobalt - The Pursuit of Next-Generation Layered Oxide Cathodes

The prosperity of the electric vehicle industry is driving the research and development of lithium-ion batteries. As one of the core components in the entire battery system, cathode materials are currently facing major challenges in pushing higher capacity up to their theoretical limits and transitioning away from the unaffordable metals. To meet these requirements, the search for next-generation cathode materials has shifted to high-nickel and cobalt-free cathodes. In this review, we distinctly pointed out the shortcomings of cobalt in stabilizing layered structures, and systematically summarized the recent efforts to eliminate cobalt and achieve higher nickel content in layered cathode materials. Lastly, a reasonable prospect is put forward for further development of layered cathode materials and other promising candidates, which is likely to spur a wave of efforts toward developing high-performance and low-cost Li-ion batteries.

25 ENERGY STORAGE↗

DOE OSTI2022

Electrolyte Reactivity at the Charged Ni-Rich Cathode Interface and Degradation in Li-Ion Batteries

The chemical and electrochemical reactions at the positive electrode–electrolyte interface in Li-ion batteries are hugely influential on cycle life and safety. Ni-rich layered transition metal oxides exhibit higher interfacial reactivity than their lower Ni-content analogues, reacting via mechanisms that are poorly understood. Here, we study the pivotal role of the electrolyte solvent, specifically cyclic ethylene carbonate (EC) and linear ethyl methyl carbonate (EMC), in determining the interfacial reactivity at charged LiNi 0.33 Mn 0.33 Co 0.33 O 2 (NMC111) and LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) cathodes by using both single-solvent model electrolytes and the mixed solvents used in commercial cells. While NMC111 exhibits similar parasitic currents with EC-containing and EC-free electrolytes during high voltage holds in NMC/Li 4 Ti 5 O 12 (LTO) cells, this is not the case for NMC811. Online gas analysis reveals that the solvent-dependent reactivity for Ni-rich cathodes is related to the extent of lattice oxygen release and accompanying electrolyte decomposition, which is higher for EC-containing than EC-free electrolytes. Combined findings from electrochemical impedance spectroscopy (EIS), TEM, solution NMR, ICP, and XPS reveal that the electrolyte solvent has a profound impact on the degradation of the Ni-rich cathode and the electrolyte. Higher lattice oxygen release with EC-containing electrolytes is coupled with higher cathode interfacial impedance, a thicker oxygen-deficient rock-salt surface reconstruction layer, more electrolyte solvent and salt breakdown, and higher amounts of transition metal dissolution. These processes are suppressed in the EC-free electrolyte, highlighting the incompatibility between Ni-rich cathodes and conventional electrolyte solvents. Finally, new mechanistic insights into the chemical oxidation pathways of electrolyte solvents and, critically, the knock-on chemical and electrochemical reactions that further degrade the electrolyte and electrodes curtailing battery lifetime are provided.

25 ENERGY STORAGE↗

DOE OSTI2024

A Carbonyl and Azo-Based Polymer Cathode for Low-Temperature Na-Ion Batteries

Due to flexible structure tunability and abundant structure diversity, redox-active polymers are promising cathode materials for developing affordable and sustainable Na-ion batteries (NIBs). However, polymer cathodes still suffer from low capacity, poor cycle life, and sluggish reaction kinetics. Herein, we designed and synthesized a polymer cathode material bearing carbonyl and azo groups as well as extended conjugation structures in the repeating units. The polymer cathode exhibited exceptional electrochemical performance in NIBs in terms of high capacity, long lifetime, and fast kinetics. When coupled with a low-concentration electrolyte, it shows superior performance at low temperatures down to -50 °C, demonstrating great promise for low-temperature battery applications. Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM) were employed to study the reaction mechanism, interphase structure, and morphological evolution, confirming reversible redox reactions between azo/carbonyl groups in the polymer and Na + /electrons, a NaF-rich interphase, and high structure stability upon cycling. In conclusion, this work provides an effective approach to developing high-performance polymer cathodes for affordable, sustainable, and low-temperature NIBs.

25 ENERGY STORAGE↗

DOE OSTI2025

Electrode Separation and Froth Flotation for the Recovery of Li-ion Battery Cathode Materials

Increasing use of Li-ion batteries (LIBs) will significantly increase the quantity of LIB waste generated from end-of-life batteries. Spent LiCoO 2 (LCO) battery cathodes contain significant quantities of valuable metals, making them good candidates for recycling. Typical recycling processes rely on high temperatures (pyrometallurgy) and chemical leachants (hydrometallurgy) to completely decompose the cathode and enable material recovery. Direct recycling processes and recovery of active material from electrode scrap do not benefit from such destructive recycling, and an efficient means of separating the cathode active material from the inactive components (e.g., polyvinylidene fluoride (PVDF) binder, conductive carbon) is needed. Here, we explore PVDF removal from LCO cathodes by two separate methods, evaluating their suitability for coupling to subsequent separation by froth flotation (FF). We show that washing electrodes in the solvent PolarClean (PC) dissolves PVDF away from LCO cathodes, enabling separation of the remaining LCO and conductive carbon by FF. The process is suitable for use with both pristine and cycled LCO electrodes, and the pristine recovered material can be used to prepare electrodes capable of cycling at 140 mAh/g. In conclusion, this demonstrates the suitability of coupled PC washing and FF separation for recycling both end-of-life batteries and scrap electrode material.

Batteries↗

DOE OSTI2024

Direct evidence of low work function on SrVO 3 cathode using thermionic electron emission microscopy and high-field ultraviolet photoemission spectroscopy

Perovskite SrVO 3 has recently been proposed as a novel electron emission cathode material. Density functional theory (DFT) calculations suggest multiple low work function surfaces, and recent experimental efforts have consistently demonstrated effective work functions of ~2.7 eV for polycrystalline samples, both results suggesting, but not directly confirming, that some fraction of even lower work function surface is present. In this work, thermionic electron emission microscopy (ThEEM) and high-field ultraviolet photoemission spectroscopy (UPS) are used to study the local work function distribution and measure the work function of a partially oriented- (110)-SrVO 3 perovskite oxide cathode surface. Our results show direct evidence of low work function patches of about 2.0 eV on the cathode surface, with a corresponding onset of observable thermionic emission at 750 °C. We hypothesize that, in our ThEEM and UPS experiments, the high applied electric field suppresses the patch field effect, enabling the direct measurement of local work functions. This measured work function of 2.0 eV is comparable to the previous DFT-calculated work function values of the SrVO-terminated (110) SrVO 3 surface (2.3 eV) and SrO-terminated (100) surface (1.9 eV). The measured 2.0 eV value is also much lower than the work function for the (001) LaB 6 single crystal cathode (~2.7 eV) and comparable to the effective work function of B-type dispenser cathodes (~2.1 eV). If SrVO 3 thermionic emitters can be engineered to access domains of this low 2.0 eV work function, they have the potential to significantly improve thermionic emitter-based technologies.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Atomic-scale constituting stable interface for improved LiNi 0.6 Mn 0.2 Co 0.2 O 2 cathodes of lithium-ion batteries

Ascribed to their higher capacity and lower cost compared to conventional LiCoO 2 , the Ni-rich layered LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622) is now considered as one promising cathode for lithium-ion batteries (LIBs). However, it still suffers from some evident performance degradation, especially under high cutoff voltages (i.e., >4.3 V versus Li/Li + ). The performance degradation typically is exhibited as capacity fading and voltage drop, mainly originating from an instable interface between the NMC622 and electrolyte as well as the evolution of the NMC structure. To improve the interfacial and structural stability of NMC cathodes, herein we deposited an ultrathin layer of Al 2 O 3 coatings (<5 nm) conformally over NMC622 composite electrodes directly using atomic layer deposition (ALD). It was found that, under different upper cutoff voltages (4.3, 4.5, and 4.7 V), the ALD Al 2 O 3 coatings enable enhanced performance of NMC622 cathodes with better cyclability and higher capacity. Particularly, the beneficial effects of the ALD Al 2 O 3 coatings are more remarkable at higher upper cutoff voltages (4.5 and 4.7 V). Furthermore, the ALD coatings can significantly improve the rate capability of NMC622. To this end, we utilized a suite of characterization tools and performed a series of electrochemical tests to clarify the effects of the ALD Al 2 O 3 coatings. This study revealed that the beneficial effects of the Al 2 O 3 ALD coatings are multiple: (i) serving as an artificial layer of solid electrolyte interphase to mitigate undesirable interfacial reactions; (ii) acting as a physical barrier to inhibit metal dissolution of NMC; and (iii) forming a reinforced networked overcoating to boost the mechanical integrity of NMC cathodes. This study is favorable for designing high-performance NMC cathodes.

25 ENERGY STORAGE↗

DOE OSTI2020

Long Term Degradation of LSM Based SOFC Cathodes: Use of a Proven Accelerated Test Regimen

The overall goals of the program were: • To understand the microstructural basis of long-term performance loss in solid oxide fuel cells (SOFCs) with cathodes based on lanthanum strontium manganite (LSM, (La 1–x Sr x ) 1–yM nO 3±z ); • To develop strategies for optimizing LSM–based cathodes that achieve improved long-term performance, while exhibiting microstructural and chemical stability, for commercial fuel cell systems. The research project carried out accelerated testing of SOFCs with LSM-based cathodes of selected compositions. After intervals of accelerated testing (and control tests using non-accelerated conditions), the cells underwent extensive microstructural characterization to determine the physical and chemical changes in the cells. By analysis of a) the results of the testing, b) the observed microstructural changes, and c) the differences in these correlations between different cathode compositions and test durations, the research: • Identified a correlation between microstructural change and performance loss: specifically, between decrease of three-phase boundary (TPB) density and increase of area specific re-sistance (ASR) during operation; • Identified a cathode composition parameter — Mn excess, defined as 1/(1–y) in (La 1–x Sr x ) 1–y MnO 3±z ) — and how it affects TPB density, ASR and change of cell performance over time.

08 HYDROGEN↗

NASA NTRSDate not supplied

The Effect of Anode Configuration on the Plasma Plume of a 25-A class Hollow Cathode

The effect of anode configuration on the plasma plume properties of a 25-A class hollow cathode are experimentally characterized. At a nominal operating condition of 20.8 A and 14.7 sccm of xenon, the cathode was operated with two axially-segmented anodes of different diameters at varying distance from the cathode. A fast, reciprocating motion stage was used to rapidly insert an ion saturation probe and an emissive probe on cathode centerline, and from those measurements, spatial profiles of plasma density, plasma potential, and electron temperature were calculated. For both anode diameters, maximum plasma potential and electron temperature increased with increasing anode distance. However, the 64-mm diameter anode was found to be significantly more sensitive to position, with measurements indicating that parameters changed continuously with position instead of an instantaneous mode change at a certain critical distance. The 254-mm diameter, in contrast, showed much more similar plasma property profiles across the range of anode positions tested and much smaller changes per unit increase in distance. These results are discussed in the context of assessing anode design for component-level cathode tests.

Space propulsion↗

NASA NTRSDate not supplied

The Effect of Anode Configuration on the Plasma Plume of a 25-A class Hollow Cathode

space propulsion↗

DOE OSTI2024

High–Energy Earth–Abundant Cathodes with Enhanced Cationic/Anionic Redox for Sustainable and Long–Lasting Na–Ion Batteries

Layered iron/manganese-based oxides are a class of promising cathode materials for sustainable batteries due to their high energy densities and earth abundance. However, the stabilization of cationic and anionic redox reactions in these cathodes during cycling at high voltage remain elusive. Here, an electrochemically/thermally stable P2-Na 0.67 Fe 0.3 Mn 0.5 Mg 0.1 Ti 0.1 O 2 cathode material with zero critical elements is designed for sodium-ion batteries (NIBs) to realize a highly reversible capacity of ≈210 mAh g –1 at 20 mA g –1 and good cycling stability with a capacity retention of 74% after 300 cycles at 200 mA g –1 , even when operated with a high charge cut-off voltage of 4.5 V versus sodium metal. Combining a suite of cutting-edge characterizations and computational modeling, it is shown that Mg/Ti co-doping leads to stabilized surface/bulk structure at high voltage and high temperature, and more importantly, enhances cationic/anionic redox reaction reversibility over extended cycles with the suppression of other undesired oxygen activities. This work fundamentally deepens the failure mechanism of Fe/Mn-based layered cathodes and highlights the importance of dopant engineering to achieve high-energy and earth-abundant cathode material for sustainable and long-lasting NIBs.

25 ENERGY STORAGE↗

DOE OSTI2024

Effects of Calcination Conditions on the Structural and Electrochemical Behaviors of High‐Nickel, Cobalt‐Free LiNi 0.9 Mn 0.1 O 2 Cathode

Abstract Eliminating cobalt from high‐nickel layered oxide cathodes lowers the cost of lithium‐ion batteries for electric vehicles. However, cobalt‐free cathodes with high Mn 4+ and Ni 2+ contents are prone to Li/Ni mixing after synthesis, potentially compromising battery energy density, rate capability, and cycling stability. Without cobalt facilitating cation ordering in the layered structure, the degree of Li/Ni mixing in cobalt‐free cathodes depends heavily on the calcination conditions. In this study, a systematic exploration of calcination temperatures and LiOH ratio for LiNi 0.9 Mn 0.1 O 2 (NM‐90) provides detailed insights into the optimal synthesis conditions for high‐capacity cobalt‐free cathodes with extended cycle life. Surprisingly, high Li/Ni mixing does not necessarily lead to poor cycling stability whereas low Li/Ni mixing does not guarantee a long cycle life. More importantly, although excessive calcination temperature can further decrease Li/Ni mixing, it does not necessarily enhance capacity. Instead, the pernicious effects from the H2 → H3 phase transition are amplified due to a pronounced two‐phase reaction. An extensive suite of chemical and structural characterization methods uncovers a correlation between elevated calcination temperature, phase transformation, cation ordering, and capacity fading behavior: “overcooking” high‐nickel, cobalt‐free cathodes induce structural arrangement toward that of LiNiO 2 , with exacerbated lattice distortion and surface instability accelerating capacity fade.

Lee, Steven↗

DOE OSTI2025

Understanding the Cathode Electrochemistry of Humidified Solid‐State Lithium‐Oxygen Batteries

Lithium-oxygen batteries (LOBs) possess a high theoretical energy density, making them potential candidates for next-generation energy storage. However, challenges such as reactive oxygen species-induced component degradation hinder their practical use. Inorganic solid-state electrolytes offer an alternative to degradation-prone aprotic electrolytes, while also protecting lithium anodes from potential atmospheric reactants. Here, this study explores the cathode electrochemistry of solid-state LOBs using humidified oxygen, which forms an aqueous catholyte during initial cycling, thereby improving cathode-electrolyte contact. To quantitatively analyze the cathode electrochemistry, a ‘Humidity-Incorporated’ Differential Electrochemical Gas Monitoring System (HiDEMS) is developed to control humidity and monitor gas consumption and evolution in real time. When studying a Li-O 2 cell that employs a NASICON-type Li 1.3 Al 0.3 Ti 1.7 (PO 4 ) 3 (LATP) solid electrolyte and a porous carbon cathode, a shift in discharge products from Li 2 O 2 to LiOH is observed over repeated cycles. While Li 2 O 2 evolves O 2 during charging, LiOH oxidation leads to minimal O 2 release and increased CO 2 production, originating from oxidation of carbon electrodes. Further, dissolution of Al and P from LATP is observed, likely driven by the formation of the alkaline catholyte. The findings highlight the need for carbon-free cathode materials and more stable solid-state conductors to minimize side reactions and improve rechargeability in humidified solid-state Li-O 2 batteries.

LATP degradation↗

DOE OSTI2022

Correlation of Oxygen Anion Redox Activity to In‐Plane Honeycomb Cation Ordering in Na x Ni y Mn 1− y O 2 Cathodes

Sodium‐ion batteries (SIBs) are one of the most promising next‐generation energy storage systems because of their abundant and low‐cost component materials. However, the lower energy density of SIBs compared with lithium‐ion batteries diminishes their practical value proposition. Among the many sodium‐based cathodes, layered transition metal oxides with high sodium content have energy densities comparable with the lithium‐ion battery technology. When charged above 4.1 V, the sodium‐based cathodes often undergo transformations because the activation of oxygen anion redox causes irreversible oxygen release, transition metal ion migration, lattice distortion, and rapid capacity decay. Here, in situ gas analysis is performed to evaluate the lattice oxygen anion redox activity in Na x Ni y Mn 1− y O 2 cathodes with P2 and O3 structural orderings. Operando X‐ray diffraction and neutron diffraction are performed to assess the structural changes related to lattice oxygen redox and transition metal ion migration in Na x Ni y Mn 1− y O 2 cathodes. The results unveil that in‐plane honeycomb cationic ordering can help suppress oxygen anion redox activity, which is critical for the future design of layered transition metal oxide cathodes that are prone to achieve high‐energy for durable SIBs.

25 ENERGY STORAGE↗

DOE OSTI2024

Bipolar Organic Cathodes for Stable and Sustainable Na‐Ion and Rechargeable Al Batteries

Bipolar organic materials have emerged as promising cathode materials for rechargeable batteries because of their high voltage and high capacity. However, they suffer from poor cyclic stability and slow reaction kinetics. In this work, we designed and synthesized two bipolar organic cathode materials, containing carbonyl (n‐type) and amine (p‐type) functional groups, as well as extended conjugation structures, for Na‐ion batteries (NIBs) and rechargeable aluminum batteries (RABs). As universal electrode materials, bipolar organic materials exhibited exceptional electrochemical performance in terms of high capacity, high voltage, long cycle life, and fast rate capability. Further, the extended conjugation structures in backbones of the bipolar organic materials facilitate the π–π stacking with graphene, playing a critical role in the high performance. Furthermore, the formation of a stable and robust NaF‐rich cathode electrolyte interphase was shown to stabilize the bipolar organic cathode in NIBs. Electrochemical kinetic measurements reveal that both functional groups undergo reversible redox reactions. Specifically, the electron transfer rate constant of the p‐type amine group is one order of magnitude higher than that of the n‐type carbonyl group. These results highlight the efficacy of developing bipolar organic materials for achieving high‐performance organic cathode in NIBs and RABs.

25 ENERGY STORAGE↗

DOE OSTI2025

Fluorinated Rocksalt‐Polyanion Cathode for Lithium‐Ion Batteries

Integrated rocksalt‐polyanion cathodes (DRXPS) are promising candidates for next‐generation lithium‐ion battery cathode materials that combine high energy density, stable cycling performance, and reduced reliance on Co and Ni. In this work, we investigated Li 3 Mn 1.6 P 0.4 O 5.4 F 0.6 , a new DRXPS cathode with fluoride incorporation. A pure spinel phase was formed and a discharge capacity retention of 84% was achieved after 200 cycles between 1.5 and 4.8 V versus Li/Li + . In comparison, the similarly synthesized Li 3 Mn 1.6 Nb 0.4 O 5.4 F 0.6 , in which all P 5+ was substituted by Nb 5+ while maintaining the same stoichiometry for all other elements, crystallized in a disordered rocksalt structure, and exhibited inferior capacity retention and rate capability than the P 5+ counterpart. Our findings expand the compositional space of DRXPS to include F − , justify the viability of integrating polyanion groups in rocksalt‐type cathodes, and highlight the superiority of P 5+ as a cation charge compensator compared to the commonly used Nb 5+ . This work thereby advances the design of robust, high‐performance cathode materials for sustainable batteries.

36 MATERIALS SCIENCE↗