Search NASA⌕ Search

SEARCH · Search NASA

Results for “coherent diffraction microscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Plasma Sprayed Hydroxyapatite Coatings: Influence of Spraying Power on Microstructure

The plasma sprayed hydroxyapatite (HA) coatings are used on metallic implants to enhance the bonding between the implant and bone in human body. The coating process was implemented at different spraying power for each spraying condition. The coatings formed from a rapid solidification of molten and partly molten particles that impact on the surface of substrate at high velocity and high temperature. The study was concentrated on different spraying power that is between 23 to 31 kW. The effect of different power on the coatings microstructure was investigated using scanning electron microscope (SEM) and phase composition was evaluated using X-ray diffraction (XRD) analysis. The coatings surface morphology showed distribution of molten, partially melted particles and some micro-cracks. The produced coatings were found to be porous as observed from the cross-sectional morphology. The coatings XRD results indicated the presence of crystalline phase of HA and each of the patterns was similar to the initial powder. Regardless of different spraying power, all the coatings were having similar XRD patterns.

36 MATERIALS SCIENCE↗

Morphological Control and Characterization of Monodispersed Ceria Particles

The morphological control of cerium oxide particles was carried out by a homogeneous precipitation followed by calcination in air at 400 deg. C. The effects of pre-aging temperature, aging time and precipitation reagents on the morphologies of final products were investigated. When urea was used as a precipitation reagent, monodispersed spherical and flake-like cerium carbonate hydroxide precursor was precipitated in the solution at 90 deg. C for 2 h after pre-aging at 25 deg. C - 50 deg. C for 24-72 h. On the other hand, monodispersed nanosize rod-like cerium hydroxide particles were obtained using triethanolamine as precipitation reagent. Ceria particles with the same morphologies and slightly smaller particle size than those of as-prepared cerium precursor could be obtained after calcination in air at 400 deg. C. Physical-chemical characteristics of the monodispersed cerium oxide particles were evaluated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrothermal Detoxization of Slate Containing Asbestos and the Possibility of Application for Fertilizer of its Products

Hydrothermal decomposition of slate (building materials) containing asbestos has been attempted by using a NH{sub 4}H{sub 2}PO{sub 4} solution. Firstly, the alteration of chrysotile as a starting material was investigated under hydrothermal conditions of 200 deg. C, 12 hrs of reaction time and with a phosphate solution. It was confirmed that the original fibrous form of chrysotile had been perfectly collapsed by the SEM observation. The chrysotile (asbestos) disappeared to form Mg-Ca-Silicate (Ca{sub 7}Mg{sub 2}P{sub 6}O{sup 24}) estimated by XRD. The composition and chemical form of reaction products (Mg-Ca-Silicate) was predicted to application as a fertilizer. Fertilizer effect of these resulted product on cultivations of Japanese radish (leaves), soybeans and tomatoes, was examined by using a special medium of mixed soil with a low content of N, P, K and a thermal-treated zeolite one. The fertilizer effects of the product were compared to commercial fertilizers such as N, N-K-P and P types. In order to estimate the fertilizer effect, the size of crops, number of fruits and number of leaves were measured everyday. As a result, these hydrothermal products of slate containing asbestos were as good as commercial fertilizers on the market. Fruits groups especially had a good crop using the hydrothermal slate product. These results show that the main components of hydrothermal treatments slate are calcium silicate and magnesium phosphate. Its decomposition reaction products may have the possibility of application for fertilization of crops which require nucleic acid--phosphorus.

54 ENVIRONMENTAL SCIENCES↗

Magnetic Studies of Mutiferroic Bi{sub 1-x}La{sub x}FeO{sub 3} Ceramics Synthesized By Solution Combustion Technique

Bi{sub 1-x}La{sub x}FeO{sub 3} (x = 0.0, 0.05, 0.10, 0.15) ceramic samples were prepared by solution combustion technique. X-ray diffraction patterns confirmed the formation of perovskite structured Bi{sub 1-x}La{sub x}FeO{sub 3} phase. Saturation magnetization (M{sub s}) increases with increasing La concentration from x = 0.0 to x = 0.15. Weak ferromagnetism is observed at room temperature in all the doped and undoped BFO samples. Mossbauer spectroscopy confirmed the presence of single-phase material for the doped compositions. Improvement in magnetic behavior appears to arise from a combination of the propensity of the samples to form pure phase material, partial destruction of spin cycloids and increased canting of spins.

36 MATERIALS SCIENCE↗

Study Of Structural And Dielectric Properties Of Ni-Mg Ferrite Nanoparticles

Ferrite nanoparticles of basic composition Ni{sub 0.7}Mg{sub 0.3}Fe{sub 2-x}Al{sub x}O{sub 4}(0.0{<=}x{<=}0.5) were prepared through citrate gel method and characterized using XRD, TEM and dielectric spectroscopy techniques. The dielectric properties were studied as a function of frequency (42 Hz-5 MHz) at room temperature. The average particle size has been found between 8-17 nm. The dispersion in dielectric properties and ac conductivity ({sigma}{sub ac}), with frequency reveals that the dispersion is due to Maxwell-Wagner type of interfacial polarization in general and the hopping of charge between Fe{sup 2+} and Fe{sup 3+} as well as between Ni{sup 2+} and Ni{sup 3+} ions at B-sites. The dielectric loss tangent (tan {delta}) shows abnormal behavior for the compositions 0.3, 0.4 and 0.5 which has been explained in the light of Rezlescue model.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Time-resolved shadowgraphic study of femtosecond laser ablation of aluminum under different ambient air pressures

Femtosecond pulse laser ablation of aluminum under different ambient air pressures between 1 atm and 4 x 10{sup -4} Pa is investigated using a femtosecond time-resolved shadowgraphic method. It is observed that as the ambient air pressure decreases, the contact front becomes more and more distinct for a certain pressure range, demonstrating that the confinement effect of the ambient air to the ablated target material can play a critically important role in the laser ablation process. It is also found that the concentric and semicircular stripe pattern, which results from the diffraction of the probe beam by the expanding plume of a specific material state and is typically observed in the shadowgraphs for 1-2 ns delay time, gradually blurs and disappears while the ambient air pressure decreases from 1 atm to 7000 Pa. If a prepulse or a relatively large pulse pedestal exists before the main pulse, however, the stripe pattern can still be observed even though the ambient air pressure is 5 x 10{sup -4} Pa. It is thus inferred that what contributes to the formation of the unique stripe pattern is a mixture of the ejected target material and ionized background gas induced by the femtosecond laser ablation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Role of Coulomb blockade and spin-flip scattering in tunneling magnetoresistance of FeCo-Si-O nanogranular films

In this work, we report the effect of FeCo atomic fraction (0.33 < x < 0.54) and temperature on the electrical, magnetic, and tunneling magnetoresistance (TMR) properties of FeCo-Si-O granular films prepared by atom beam sputtering technique. Glancing angle x-ray diffraction and TEM studies reveal that films are amorphous in nature. The dipole-dipole interactions (particle-matrix mixing) is evident from zero-field cooled and field-cooled magnetic susceptibility measurements and the presence of oxides (mainly Fe-related) is observed by x-ray photoelectron spectroscopy analysis. The presence of Fe-oxides is responsible for the observed reduction of saturation magnetization and rapid increase in coercivity below 50 K. TMR has been observed in a wide temperature range, and a maximum TMR of -4.25% at 300 K is observed for x = 0.39 at a maximum applied field of 60 kOe. The fast decay of maximum TMR at high temperatures and lower TMR values at 300 K when compared to P{sub FeCo}{sup 2}/(1+P{sub FeCo}{sup 2}), where P{sub FeCo} is the spin polarization of FeCo are in accordance with a theoretical model that includes spin-flip scattering processes. The temperature dependent study of TMR effect reveals a remarkably enhanced TMR at low temperatures. The TMR value varies from -2.1% at 300 K to -14.5% at 5 K for x = 0.54 and a large MR value of -18.5% at 5 K for x = 0.39 is explained on the basis of theoretical models involving Coulomb blockade effects. Qualitatively particle-matrix mixing and the presence of Fe-oxides seems to be the source of spin-flip scattering, responsible for fast decay of TMR at high temperatures. A combination of higher order tunneling (in Coulomb blockade regime) and spin-flip scattering (high temperature regime) explains the temperature dependent TMR of these films.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and Magnetic Properties of Ni Rich Amorphous Boride Nanoparticles

The Ni rich amorphous boride nanoparticles can be prepared very easily by the solid-solid reaction of the NiCl{sub 2} and NaBH{sub 4} powders at room temperature. XRD, DTA-TG, FESEM, TEM, and selected-area electron diffraction characterize the resultant nanoparticles. The results show that the resultant is mainly composed of the amorphous Ni-B alloy nanoparticles with an average diameter of 15-25 nm.

36 MATERIALS SCIENCE↗

Electron transport properties of antimony doped SnO{sub 2} single crystalline thin films grown by plasma-assisted molecular beam epitaxy

By antimony doping tin oxide, SnO{sub 2}:Sb (ATO), below 1.0% Sb concentration, controllable n-type doping was realized. Plasma-assisted molecular beam epitaxy has been used to grow high quality single crystalline epitaxial thin films of unintentionally doped (UID) and Sb-doped SnO{sub 2} on r-plane sapphire substrates. A UID thickness series showed an electron concentration of 7.9x10{sup 18} cm{sup -3} for a 26 nm film, which decreased to 2.7x10{sup 17} cm{sup -3} for a 1570 nm film, whereas the mobility increased from 15 to 103 cm{sup 2}/V s, respectively. This series illustrated the importance of a buffer layer to separate unintentional heterointerface effects from the effect of low Sb doping. Unambiguous bulk electron doping was established by keeping the Sb concentration constant but changing the Sb-doped layer thickness. A separate doping series correlated Sb concentration and bulk electron doping. Films containing between 9.8x10{sup 17} and 2.8x10{sup 20} Sb atoms/cm{sup 3} generated an electron concentration of 1.1x10{sup 18}-2.6x10{sup 20} cm{sup -3}. As the atomic Sb concentration increased, the mobility and resistivity decreased from 110 to 36 cm{sup 2}/V s and 5.1x10{sup -2} to 6.7x10{sup -4} OMEGA cm, respectively. The Sb concentration was determined by secondary ion mass spectrometry. X-ray diffraction and atomic force microscopy measurements showed no detrimental effects arising from the highest levels of Sb incorporation. Temperature dependent Hall measurements established a lower limit for the Sb electron activation energy of 13.2 meV and found that films with greater than 4.9x10{sup 19} electrons/cm{sup 3} were degenerately doped. Within experimental uncertainties, 100% donor efficiency was determined for Sb-doped SnO{sub 2} in the range studied.

36 MATERIALS SCIENCE↗

Bulk diffusion induced structural modifications of carbon-transition metal nanocomposite films

The influence of transition metal (TM = V,Co,Cu) type on the bulk diffusion induced structural changes in carbon:TM nanocomposite films is investigated. The TMs have been incorporated into the carbon matrix via ion beam co-sputtering, and subsequently the films have been vacuum annealed in the temperature range of 300 - 700 deg. C. The structure of both the dispersed metal rich and the carbon matrix phases has been determined by a combination of elastic recoil detection analysis, x-ray diffraction, transmission electron microscopy, and Raman spectroscopy. The as-grown films consist of carbidic (V and Co) and metallic (Cu) nanoparticles dispersed in the carbon matrix. Thermal annealing induces surface segregation of Co and Cu starting at {>=} 500 deg. C, preceded by the carbide-metal transformation of Co-carbide nanoparticles at {approx} 300 deg. C. No considerable morphological changes occur in C:V films. In contrast to the surface diffusion dominated regime where all the metals enhance the six-fold ring clustering of C, in the bulk diffusion controlled regime only Co acts as a catalyst for the carbon graphitization. These results are consistent with the metal-induced crystallization mechanism in the C:Co films. The results are discussed on the basis of the metal-carbide phase stability, carbon solubility in metals or their carbides, and interface species.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural and magnetic properties of RMn{sub 2-x}Fe{sub x}D{sub 6} compounds (R=Y, Er; x{<=}0.2) synthesized under high deuterium pressure

RMn{sub 2-x}Fe{sub x}D{sub 6} compounds were obtained by applying a deuterium pressure of several kbar to RMn{sub 2-x}Fe{sub x} compounds for x{<=}0.2 and R=Y, Er. These compounds are isostructural to RMn{sub 2}D{sub 6} compounds and crystallize in a K{sub 2}PtCl{sub 6} type structure with a random substitution of R and half the Mn atoms in the same 8c site whereas the other Mn atoms are located on the 4a site and surrounded by six D atoms (24e site). According to neutron powder diffraction analysis the Fe atoms are preferentially substituted on the 4a site. YMn{sub 2-x}Fe{sub x}D{sub 6} compounds are paramagnetic and their molar susceptibility follows a modified Curie-Weiss law. ErMn{sub 2-x}Fe{sub x}D{sub 6} compounds display a ferromagnetic behavior at 2 K, but their saturation magnetization (M{sub S{approx}}4.0 {mu}{sub B}/f.u.) is half that of their parent compounds (M{sub S{approx}}8.0 {mu}{sub B}/f.u.). The neutron diffraction patterns of ErMn{sub 1.8}Fe{sub 0.2}D{sub 6} display below 13 K both ferromagnetic and antiferromagnetic short range order, which can be related to a disordered distribution of Er moments. The paramagnetic temperatures of ErMn{sub 2-x}Fe{sub x}D{sub 6} compounds are negative and decrease versus the Fe content whereas they are positive and increase for their parent compounds. -- Graphical abstract: Neutron powder diffraction (NPD) patterns of ErMn{sub 1.8}Fe{sub 0.2}D{sub 6} at 1.4 and 30 K measured on G4.1 spectrometer. Inset: difference curves between the NPD patterns measured at T{sub 1} and 30 K showing ferromagnetic (FM) and antiferromagnetic (AFM) short range order. Display Omitted Research highlights: {yields} RMn{sub 2-x}Fe{sub x} compounds (x{<=}0.2) were synthesized under 10 kb deuterium pressure. {yields} The Fe atoms are substituted to Mn on 4a site. {yields} RMn{sub 2-x}Fe{sub x}D{sub 6} desorb D up to 1115 K forming the parent intermetallics by recombination. {yields} ErMn{sub 2-x}Fe{sub x}D{sub 6} compounds show coexistence of ferro- and antiferromagnetic SRO below 10 K.

36 MATERIALS SCIENCE↗

Biomolecule-assisted synthesis and gas-sensing properties of porous nanosheet-based corundum In{sub 2}O{sub 3} microflowers

Porous nanosheet-based corundum In{sub 2}O{sub 3} microflowers were fabricated by one-pot hydrothermal treatment of D-fructose and In(NO{sub 3}){sub 3} mixture using urea as a precipitating agent followed by calcination. The products were characterized by X-ray diffraction, scanning and transmission electron microscopy. The effects of D-fructose and urea on the fabrication of nanosheet-based corundum In{sub 2}O{sub 3} microflowers were investigated and a possible mechanism is proposed to explain the formation of the hierarchical nanostructures. The gas sensor based on the In{sub 2}O{sub 3} microflowers exhibits excellent sensing properties for the detection of formaldehyde. - Graphical abstract: Nanosheets-based corundum In{sub 2}O{sub 3} microflowers were fabricated by one-pot hydrothermal treatment of D-fructose/In(NO{sub 3}){sub 3} mixture followed by calcination, which show high performance for formaldehyde sensing. Highlights: Black-Right-Pointing-Pointer Preparation of porous nanosheet-based corundum In{sub 2}O{sub 3} microflowers. Black-Right-Pointing-Pointer Morphology and phase control of In{sub 2}O{sub 3}. Black-Right-Pointing-Pointer Gas sensor based on the In{sub 2}O{sub 3} microflowers exhibits excellent sensing properties for the detection of formaldehyde.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Superior cycle performance of Sn-C/graphene nanocomposite as an anode material for lithium-ion batteries

A novel anode material for lithium-ion batteries, tin nanoparticles coated with carbon embedded in graphene (Sn-C/graphene), was fabricated by hydrothermal synthesis and subsequent annealing. The structure and morphology of the nanocomposite were characterized by X-ray diffraction, scanning electron microscopy, and transmission electron microscopy. The size of the Sn-C nanoparticles is about 50-200 nm. The reversible specific capacity of the nanocomposite is {approx}662 mAh g{sup -1} at a specific current of 100 mA g{sup -1} after 100 cycles, even {approx}417 mAh g{sup -1} at the high current of 1000 mA g{sup -1}. These results indicate that Sn-C/graphene possesses superior cycle performance and high rate capability. The enhanced electrochemical performances can be ascribed to the characteristic structure of the nanocomposite with both of the graphene and carbon shells, which buffer the volume change of the metallic tin and prevent the detachment and agglomeration of pulverized tin. - Graphical abstract: Tin nanoparticles coated with carbon embedded in graphene have been successfully fabricated by hydrothermal synthesis and subsequent annealing. This nanocomposite as an anode material for lithium-ion batteries exhibits superior cycle performance. Highlights: > A novel Sn-C/graphene nanocomposite as an anode material for lithium-ion batteries. > Carbon coating and graphene improve the cycle performance of the Sn anode material. > Possess large capacity, superior cycle performance, and high rate capability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, crystal structure, and photocatalytic activity of the new three-layer aurivillius phases, Bi{sub 2}ASrTi{sub 2}TaO{sub 12} (A=Bi, La)

Two new three-layer Aurivillius phases Bi{sub 2}ASrTi{sub 2}TaO{sub 12} (A=Bi, La) have been synthesized. The detailed structure determination of Bi{sub 2}ASrTi{sub 2}TaO{sub 12} (A=Bi, La) performed by powder X-ray diffraction (XRD) and selected area electron microscopy (SAED) shows that they all crystallize in the space group I/4mmm. UV-visible diffuse reflection spectrum of the prepared Bi{sub 2}ASrTi{sub 2}TaO{sub 12} (A=Bi, La) indicates that it had absorption in the ultraviolet (UV) region. The photocatalytic activity of the Bi{sub 2}ASrTi{sub 2}TaO{sub 12} (A=Bi, La) powders was evaluated by degradation of rhodamine B (RB) molecules in water under UV light irradiation. The results showed that Bi{sub 2}ASrTi{sub 2}TaO{sub 12} (A=Bi, La) has high photocatalytic activity at room temperature. Therefore, the preparation and properties studies of Bi{sub 2}ASrTi{sub 2}TaO{sub 12} (A=Bi, La) with a three-layer Aurivillius structure suggest potential future applications in photocatalysis. - Graphical abstract: Two new three-layer Aurivillius phases Bi{sub 2}ASrTi{sub 2}TaO{sub 12} (A=Bi, La) have been synthesized by a conventional solid state reaction method. And this is the crystal structure of the three-layer Aurivillius phases, Bi{sub 2}ASrTi{sub 2}TaO{sub 12}.

36 MATERIALS SCIENCE↗

Oxalic acid mediated synthesis of WO{sub 3}.H{sub 2}O nanoplates and self-assembled nanoflowers under mild conditions

Tungsten oxide hydrate (WO{sub 3}.H{sub 2}O) nanoplates and flower-like assemblies were successfully synthesized via a simple aqueous method. The effects of reaction parameters in solution on the preparation were studied. Nanoplates and nanoflowers can be selectively prepared by changing the amount of H{sub 2}C{sub 2}O{sub 4}. In-situ assembly of nanoplates to nanoflowers was also proposed for the formation of assembled nanostructures. In addition, the reaction time and temperature have important effects on the sizes of the as-obtained samples. Crystal structure, morphology, and composition of final nanostructures were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). Optical properties of the synthesized samples and the growth mechanism were studied by UV-vis detection. Degradation experiments of Rhodamine B (RhB) were also performed on samples of nanoplates and nanoflowers under visible light illumination. Nanoflower sample exhibited preferable photocatalytic property to nanoplate sample. - Graphical abstract: The oxalic acid has a key role for the structure of WO{sub 3}.H{sub 2}O evolution from plates to flowers and the dehydration process of WO{sub 3}.2H{sub 2}O to WO{sub 3}.H{sub 2}O. Highlights: > Tungsten oxides hydrate was synthesized via a simple aqueous method. > The size of WO{sub 3}.H{sub 2}O was controlled by the reaction time and temperature. > The assembly of WO{sub 3}.H{sub 2}O nanoplates to nanoflowers was achieved with higher H{sub 2}C{sub 2}O{sub 4}/Na{sub 2}WO{sub 4} ratio. > Oxalic acid has a key role in the dehydration process of WO{sub 3}.2H{sub 2}O to WO{sub 3}.H{sub 2}O.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Epitaxial lateral overgrowth in the system Si/SiO{sub x}/Si: The influence of residual oxygen at the interface

We have studied epitaxial lateral overgrowth from the liquid phase in the system Si/SiO{sub x}/Si using a dedicated, synchrotron-based x-ray diffraction setup (topomicroscopy) and transmission electron microscopy. A combination of high angular resolution in reciprocal space with a high spatial resolution in real space may probe lattice tilts in the microradian range on a micrometer scale. We attribute the observed curvature of the silicon lamella to an oxygen loss within the SiO{sub x} layer. Finite-element calculations on the elastic strain distribution and a numerical description of the x-ray scattering process strongly support this scenario.

36 MATERIALS SCIENCE↗

Polymerization of aniline in the interlayer space of molybdenum trioxide and its electrochemical properties

Molybdenum trioxide/polyaniline (MoO{sub 3}/PANI) composite was prepared first by ion-exchange reaction between aniline (ANI) and dodecylamine (DDA) which was intercalated precursor, and then was formed under the polymerization of ANI within the interlayer space of MoO{sub 3} at 120 deg. C for 3 d in air. According to powder X-ray diffraction, scanning electron microscopy, thermogravimetric analysis, infrared spectroscopy and electrochemical testing, MoO{sub 3}/PANI composite has layered structure, and its interlayer spacing is 1.127 nm. Moreover, it has high thermal stability with the compound and completes its weight loss at 751.9 deg. C. Electrochemical investigation shows that MoO{sub 3} is the major active substance in the MoO{sub 3}/PANI electrode, and MoO{sub 3}/PANI electrode demonstrates better conductivity and electrochemical activity than pure MoO{sub 3} electrode, attributed to the promotion of Li{sup +} and/or electron transport. In addition, the alternating current impedance proves that if the resistance of MoO{sub 3}/PANI electrode reduces apparently, the electrochemical activity will increase correspondingly, the same as the relationship between the ohmic resistance and the electrical conductivity. - Graphical abstract: Aniline (ANI) monomer was intercalated into the interlayer space of molybdenum trioxide (MoO{sub 3}) and heat-treated at 120 deg. C for 3 d in air, and then polymerized to form layered structure of molybdenum trioxide/polyaniline (MoO{sub 3}/PANI) composite. Its interlayer spacing of MoO{sub 3}/PANI composite is 1.127 nm.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Controllable synthesis and growth mechanism of {alpha}-Co(OH){sub 2} nanorods and nanoplates by a facile solution-phase route

A facile chemical precipitation route has been developed to control synthesis of {alpha}-cobalt hydroxide nanostructures with rod-like and plate-like morphologies. The {alpha}-Co(OH){sub 2} nanorods were achieved in large quantity when the experiments were carried out in the presence of a suitable shape-controlling reagent polyvinyl pyrrolidone (PVP), while the {alpha}-Co(OH){sub 2} nanoplates were obtained when the experiments were conducted in the absence of PVP, whilst keeping other experimental conditions constant. The chemical composition and morphologies of the as-prepared {alpha}-Co(OH){sub 2} nanoparticles were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The effect of polymer PVP on the morphologies of {alpha}-Co(OH){sub 2} nanoparticles were discussed in detail. The results indicated that PVP played a key role for the formation of {alpha}-Co(OH){sub 2} nanorods. The growth mechanism of the as-synthesized nanorods and nanoplates were discussed in detail based on the experimental results. A possible growth mechanism has been proposed to illustrate the growth of {alpha}-Co(OH){sub 2} nanorods. - Graphical abstract: A facile solution-phase route has been developed to synthesize {alpha}-Co(OH){sub 2} nanorods and nanoplates. The possible growth mechanism of nanorods and nanoplates was proposed. Highlights: Black-Right-Pointing-Pointer A facile controllable route was described for {alpha}-Co(OH){sub 2} nanowires and nanoplates. Black-Right-Pointing-Pointer The {alpha}-Co(OH){sub 2} nanowires were achieved in the presence of shape controller PVP. Black-Right-Pointing-Pointer The {alpha}-Co(OH){sub 2} nanoplates were obtained in the absence of shape controller PVP. Black-Right-Pointing-Pointer The shape controller PVP played a key role in the formation of {alpha}-Co(OH){sub 2} nanowires.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗