Search NASA⌕ Search

SEARCH · Search NASA

Results for “complex fluid”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Preflight Definition and Verification Testing for the Plant Habitat-07 Experiment to Study Substrate Moisture Impacts on Lettuce Plant and Microbiome Development

Delivering adequate water and oxygen to root zones of crops growing in microgravity is challenging due to the complex behavior of fluids and gasses during spaceflight. Chronic excess (flood) or insufficient (drought) water levels, or intermittent watering and wilting of plants, leads to alterations in plant growth and impacts on the nutritional and microbial composition of those plants. PH-07 will apply controlled water stress to assess and quantify changes in plant growth and the microbiome of a well-tested food crop, ‘Outredgeous’ red romaine lettuce, grown in NASA’s Advanced Plant Habitat (APH) on the ISS.

Gioia Massa↗
DOE OSTI2016

Solving Drift-flux Model Using High-Resolution Spatial Discretization Scheme

Accurate modeling and simulation of the two-phase flow phenomena are critical to the system and safety analysis of light water reactors. Compared to the more complex two-fluid model, the drift-flux model treats the two phases as a mixture, and thus the models are formulated to consider the conservation laws of the mixture. The relative motion between the two phases is realized by constitutive correlations. Although the drift flux models have limitations in certain applications, they are widely used in many applications due to their simplicity and applicability to a wide range of two-phase flow problems. First-order numerical schemes are widely used in existing codes, which introduces excessive numerical diffusions. The objective of this work is to investigate a high-resolution spatial scheme in the application to solve drift-flux two-phase flow problems. In this study, a high-resolution spatial discretization scheme has been investigated in the application of solving drift-flux two-phase flow problem. The scheme is validated using existing experimental results. Compared to the first order scheme, it demonstrated excellent capability in reducing numerical error. Extended work will focus on the comparison of numerical errors from discretization schemes and model uncertainties. (authors)

42 ENGINEERING↗
DOE OSTI2017

Method and apparatus for purifying nucleic acids and performing polymerase chain reaction assays using an immiscible fluid

Embodiments of the present invention are directed toward devices, systems, and methods for purifying nucleic acids to conduct polymerase chain reaction (PCR) assays. In one example, a method includes generating complexes of silica beads and nucleic acids in a lysis buffer, transporting the complexes through an immiscible fluid to remove interfering compounds from the complexes, further transporting the complexes into a density medium containing components required for PCR where the nucleic acids disassociate from the silica beads, and thermocycling the contents of the density medium to achieve PCR. Signal may be detected from labeling agents in the components required for PCR.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Method and apparatus for purifying nucleic acids and performing polymerase chain reaction assays using an immiscible fluid

Embodiments of the present invention are directed toward devices, systems, and methods for purifying nucleic acids to conduct polymerase chain reaction (PCR) assays. In one example, a method includes generating complexes of silica beads and nucleic acids in a lysis buffer, transporting the complexes through an immiscible fluid to remove interfering compounds from the complexes, further transporting the complexes into a density medium containing components required for PCR where the nucleic acids disassociate from the silica beads, and thermocycling the contents of the density medium to achieve PCR. Signal may be detected from labeling agents in the components required for PCR.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Analysis of Planar-Cavity Receiver Reactor for Solar Thermochemical Dry-Reforming

Concentrating solar thermal (CST) systems can be leveraged to provide not only heat for power generation, but also for energy storage and thermochemical fuel production. Such solar thermochemical processes have been studied conceptually, from solar thermochemical hydrogen production (STCH) and thermochemical energy storage (TCES), to gasification, reforming, and fuel upgrading by various means. The solar receiver and reactor are critical components in the conversion of solar energy into chemical energy in the form of 'solar fuels'. For effective conversion of solar energy within a coupled solar receiver-reactor, extremely high temperatures are required, thereby demanding a high solar concentration ratio (CR) for efficient operation. This creates a design challenge for the receiver-reactor, as many thermochemical processes involve gas or gas-solid systems that are limited by low heat transfer coefficients. A unique receiver design is proposed that has the potential to incorporate various high-temperature thermochemical processes such as TCES-assisted power generation, methane reforming, or STCH processes. Modeling this receiver and its potential applications requires a full three-dimensional model that accurately captures the interconnected effects of receiver geometry, spatial solar irradiance, complex radiation, reaction kinetics, fluid dynamics, and heat transfer. In this paper we analyze a CST system integrated with this unique planar-cavity receiver-reactor design using the developed model. The model presented in this paper showed where improved thermal management was needed to achieve suitable receiver performance when a dry-methane reforming process is implemented.

14 SOLAR ENERGY↗
DOE OSTI2021

Synergistic foam stabilization and transport improvement in simulated fractures with polyelectrolyte complex nanoparticles: Microscale observation using laser etched glass micromodels

Inaccessibility to direct pore scale observation in hydrocarbon recovery of tight shale formations poses a great challenge to water-energy nexus initiatives and necessitates the use of high throughput technologies to emulate environmentally friendly processes. Herein, we employ a precise glass micromodel fabrication and visualization method to isolate the supercritical CO 2 bubbles surrounded by CO 2 -water lamella prepared in saline produced water stabilized with molecular complexation of zwitterionic surfactants (ZS) and polyelectrolyte complex nanoparticles (PECNP). The Selective Laser Enhanced Etching (SLE) technique was selected for micromodel simulation of high-pressure flow. Two representative designs, (1) fracture/micro-crack network 28 and (2) fracture/matrix were etched on fused silica glass with a laser printing machine and scCO 2 foam was injected to study the foamability, propagation, stability, and fluid loss properties. The highly monodispersed and uniformly distributed array of scCO 2 bubbles were detected in flow of scCO 2 foam in highly saline brine containing ionic complexes of positively charged PECNPs and ZS, whereas foam flow with the lamella containing ZS in fractures offered a noticeably large and polydisperse array of scCO 2 bubbles. scCO 2 bubble motion and deformation were traced, and local description of foam flow was visually examined. The confined array of scCO 2 bubbles stabilized by ZS in microcracks was affected by bubble growth and coalescence, whereas the super-populated array of monodispersed scC O2 bubbles with lamella containing complexes of PECNP and ZS were able to fill the channels with stable configurations within the timeframe of comparative stability measurements. The ability of complex fluid to prevent the formation damage was evaluated through fluid loss visualization in micromodels. Probing scCO 2 foam transport in homogenous porous media revealed smaller volume leak-off for scCO 2 foam containing PECNP-ZS ionic complexes.

04 OIL SHALES AND TAR SANDS↗
NASA NTRS1989

Some elements of a theory of multidimensional complex variables. I - General theory. II - Expansions of analytic functions and application to fluid flows

The paper introduces a new theory of N-dimensional complex variables and analytic functions which, for N greater than 2, is both a direct generalization and a close analog of the theory of ordinary complex variables. The algebra in the present theory is a commutative ring, not a field. Functions of a three-dimensional variable were defined and the definition of the derivative then led to analytic functions.

Martin, E. Dale↗
DOE OSTI2015

Devices, systems, and methods for conducting sandwich assays using sedimentation

Embodiments of the present invention are directed toward devices, systems, and method for conducting sandwich assays using sedimentation. In one example, a method includes generating complexes on a plurality of beads in a fluid sample, individual ones of the complexes comprising a capture agent, a target analyte, and a labeling agent. The plurality of beads including the complexes may be transported through a density media, wherein the density media has a density lower than a density of the beads and higher than a density of the fluid sample, and wherein the transporting occurs, at least in part, by sedimentation. Signal may be detected from the labeling agents of the complexes.

42 ENGINEERING↗
DOE OSTI2023

Evaluating the Impact of Redox Potential on the Corrosion of Q125, 316L, and C276 Steel in Low-Temperature Geothermal Systems

Time series experiments were used to explore the fluid redox impact on the corrosion of Q125, 316L, and C276 steels in low-ionic-strength and neutral water at temperature and pressure conditions associated with low-temperature geothermal systems. After exposing polished samples of each steel grade to an oxidizing (H2O2) and a reducing (Zn-doped) fluid for intervals of 24 h, 1 week, and 6 weeks, the atomic force microscopy results revealed general corrosion for Q125, while 316L and C276 exhibited pitting, crevice expansion, and edge attack corrosion. Secondary depositional features are frequently found as topographic highs, adjacent to pitting corrosion. These features may be identified as there is a very strong spatial correlation between the height retrace and phase retrace surface maps. All steels became progressively rougher over time after exposure to both fluids, while the corrosion rates were more complex. Samples exposed to the reducing fluid experienced an increase in the corrosion rate over time, while C276 and 316L experienced a decrease in the corrosion rate. Finally, a novel data validation technique was developed to address the intrinsic scalability of corrosion. The results indicate that the AFM scan area does not affect the measured surface roughness over nearly three orders of magnitude.

Bowman, Samuel (ORCID:000000021510174X)↗
DOE OSTI2017

Affordable Rankine Cycle Waste Heat Recovery for Heavy Duty Trucks

Nearly 30% of fuel energy is not utilized and wasted in the engine exhaust. Organic Rankine Cycle (ORC) based waste heat recovery (WHR) systems offer a promising approach on waste energy recovery and improving the efficiency of Heavy-Duty diesel engines. Major barriers in the ORC WHR system are the system cost and controversial waste heat recovery working fluids. More than 40% of the system cost is from the additional heat exchangers (recuperator, condenser and tail pipe boiler). The secondary working fluid loop designed in ORC system is either flammable or environmentally sensitive. The Eaton team investigated a novel approach to reduce the cost of implementing ORC based WHR systems to Heavy-Duty (HD) Diesel engines while utilizing safest working fluids. Affordable Rankine Cycle (ARC) concept aimed to define the next generation of waste energy recuperation with a cost optimized WHR system. ARC project used engine coolant as the working fluid. This approach reduced the need for a secondary working fluid circuit and subsequent complexity. A portion of the liquid phase engine coolant has been pressurized through a set of working fluid pumps and used to recover waste heat from the exhaust gas recirculation (EGR) and exhaust tail pipe exhaust energy. While absorbing heat, the mixture is partially vaporized but remains a wet binary mixture. The pressurized mixed-phase engine coolant mixture is then expanded through a fixed-volume ratio expander that is compatible with two-phase conditions. Heat rejection is accomplished through the engine radiator, avoiding the need for a separate condenser. The ARC system has been investigated for PACCAR’s MX-13 HD diesel engine.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

Strengthening of Calcite Assemblages Through Chemical Complexation Reactions

Abstract Utilization of subsurface reservoirs, including fluid extraction/injection, can induce stress changes and modify in‐situ chemical equilibrium causing subcritical fracturing and deformation. Here, we show that chemical complexation reactions at the newly created fracture surfaces within the crack tip limit fracturing during consolidation of granular calcite assemblages. Previously, we showed that analogous chemical complexation reactions can increase in‐situ fracture toughness in pre‐fractured single crystal calcite. To test the chemical complexation effect under subsurface conditions, we consolidated samples under increasing hydrostatic pressure to induce widespread intergranular fracturing in the presence of fluid containing common anions. Measured consolidation, acoustic emissions, and microfracturing demonstrate that deformation correlates with complexation affinity for calcium in calcite and aqueous anions. We observed that deformation is lowest in the presence of strongly complexing anions (e.g., sulphate), provided sufficient anion diffusion rates. This understanding is important for predicting reservoir effective strength in the presence of complex aqueous fluids.

Choens, R. C.↗
NASA NTRS1992

Channels and valley networks

Attention is given to Martian channels and valley networks, since they have become a principal element of evidence to the effect that the Martian atmosphere evolved from an early volatile-rich state to its present condition. The outflow channels are relatively young, later Hesperian or Amazonian in age. They formed by immense outbursts of fluid from subsurface sources. Complexity in outflow-channel morphology was generated by varying amounts of sediment and ice in the aqueous-fluid flow systems. The overall cataclysmic-flood morphology may thus be locally transitional to morphologies generated by ice and debris flowage. Although local areas of valley networks, such as on Alba Patera, formed coevally with outflow channel activity, regionally extensive networks dominate in the heavily cratered terrains. The morphology of many valleys suggests genesis by ground-water sapping; for some valleys, surface runoff may have been more important.

Baker, Victor R.↗
DOE OSTI2026

The Stability of Nd Hydroxyl Complexes at Near Neutral to Alkaline pH from 25 to 75 °C: Implications for Monazite Solubility in Hydrothermal Aqueous Fluids

Speciation of rare earth elements (REE) in aqueous fluids controls their mobilization during fluid-rock interaction. Thermodynamic modeling provides important insights into the factors controlling REE mobility and fractionation in aqueous fluids, in which aqueous REE hydroxyl complexes are particularly important across a broad pH range. However, the stability of these REE hydroxyl complexes remains poorly determined due to limited experimental data above ambient temperature. In this work, UV–vis spectrophotometry experiments were conducted to determine the cumulative hydrolysis constants for neodymium (Nd) from 25 to 75 °C in near-neutral to alkaline solutions. The color indicator m -cresol purple was used to determine in situ pH. Alkaline NaOH-bearing aqueous solutions were doped with varying initial Nd concentrations (0 to ∼0.155 mmol/kg), which resulted in the release of protons (H + ) and pH decrease during hydrolysis of Nd 3+ according to Nd 3+ + n H 2 O = Nd(OH) n 3– n + H + . The average OH – ligand number coordinated to Nd 3+ was found to increase from 1.0 to 1.6 at 25 °C and from 1.2 to 2.8 at 75 °C over a pH range from 6.3 to 9.0. The measured speciation shows an increased predominance of Nd(OH) 3 0 over the Nd(OH) 2 + and Nd(OH) 2+ species with increased temperature and pH. The increasing cumulative formation constants (log*β° n , n = 1 to 3) retrieved from 25 to 75 °C differ by 0.1 to 1.9 logarithmic units in comparison to existing thermodynamic databases. These updated thermodynamic data have important implications for geochemical modeling of the speciation of Nd hydroxyl complexes and the solubility of monazite as a function of pH.

58 GEOSCIENCES↗
DOE OSTI2019

Entropic colloidal crystallization pathways via fluid–fluid transitions and multidimensional prenucleation motifs

Complex crystallization pathways are common in protein crystallization, tetrahedrally coordinated systems, and biomineralization, where single or multiple precursors temporarily appear before the formation of the crystal. The emergence of precursors is often explained by a unique property of the system, such as short-range attraction, directional bonding, or ion association. But, structural characteristics of the prenucleation phases found in multistep crystallization remain unclear, and models are needed for testing and expanding the understanding of fluid-to-solid ordering pathways. Here, we report 3 instances of 2-step crystallization of hard-particle fluids. Crystallization in these systems proceeds via a high-density precursor fluid phase with prenucleation motifs in the form of clusters, fibers and layers, and networks, respectively. The density and diffusivity change across the fluid–fluid phase transition increases with motif dimension. We observe crystal nucleation to be catalyzed by the interface between the 2 fluid phases. The crystals that form are complex, including, notably, a crystal with 432 particles in the cubic unit cell. Finally, our results establish the existence of complex crystallization pathways in entropic systems and reveal prenucleation motifs of various dimensions.

2-step crystallization↗
NASA NTRS1997

Solution adaptive Cartesian grid methods for aerodynamic flows with complex geometries

Cartesian methods for computational fluid dynamics are considered to offer an accurate and robust approach for the simulation of aerodynamic flows around geometrically complex bodies. A part of the ongoing research in this domain is reviewed with the aim of providing insight into the fundamental challenges faced by the practitioners of this approach, and a guide to further research. The integration schemes used in Cartesian solvers are similar to those used in other approaches. The emphasis is on the geometric algorithms, surface modeling and boundary conditions required to design a successful Cartesian mesh scheme.

Aftosmis, Michael J.↗