SEARCH · Search NASA

Results for “compositional reasoning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

All sources NASA NTRS DOE OSTI

NASA NTRS1979

Tungsten fiber reinforced FeCrAlY - A first generation composite turbine blade material

General and composite turbine blade material requirements are examined to identify a specific tungsten fiber reinforced superalloy (TFRS) having, in addition to strength, the desired combination of other material properties needed in turbine blades. Experimental data indicated that a thoriated tungsten fiber reinforced FeCrAlY matrix composite should have the stress-rupture, creep, tensile, fatigue, and impact strengths required for turbine blades operating from 1250 to 1370 K. Fabrication and design concepts are developed to demonstrate the feasibility of fabricating a hollow TFRS turbine blade at reasonable cost.

Petrasek, D. W.↗

NASA NTRS1995

Very low mass stars and white dwarfs in NGC 6397

Deep Wide Field/Planetary Camera 2 (WFPC2) images in wide bands centered at 606 and 802 nm were taken with the Hubble Space Telescope (HST) 4.6 min from the center of the galactic globular cluster NGC 6397. The images were used to accurately position approximately 2120 stars detected in the field on a color magnitude diagram down to a limiting magnitude m(sub 814) approximately = m(sub I) approximately = 26 determined reliably and solely by counting statistics. A white dwarf sequence and a rich, narrow cluster main sequence are detected for the first time, the latter stretching from m(sub 814) = 18.5 to m(sub 814) = 24.0 where it becomes indistinguishable from the field population. Two changes of slope of the main sequence at m(sub 814) approximately = 20 and m(sub 814) approximately = 22.5 are evident. The corresponding luminosity function increases slowly from M(sub 814) approximately = 6.5 to 8.5 are expected from ground-based observations but then drops sharply from there dwon to the measurement limit. The corresponding mass function obtained bu using the only presently available mass-luminosity function for the cluster's metallicity rises to a plateau between approximately 0.25 and approximately 0.15 solar mass, but drops toward the expected mass limit of the normal hydrogen burning main sequence at approximately 0.1 solar mass. This result is in clear contrast to that obtained from the ground and implies either a substantial modification of the cluster's initial mass function due to dynamical evolution in its lifetime, or that very low mass stars are not produced in any dynamically significant amount by clusters of this type. The white dwarf sequence is in reasonable agreement with a cooling sequence of models of mass 0.5 solar mass at the canonical distance of NGC 6397 with a scatter that is most likely due to photometric errors, but may also reflect real differences in mass or chemical composition. Contamination from unresolved galaxies, which cannot be reliably identified with our filters, makes it difficult to meaningfully compare the observed white dwarf luminosity function with its theoretical counterpart.

Paresce, Francesco↗

NASA NTRS1995

Pole-to-Pole Distribution of Stratospheric Black Carbon (Soot) Aerosol from Aircraft

The distribution of black carbon (soot) aerosol (BCA) in the atmosphere is of interest for several reasons: (1) Because BCA has the highest absorption cross section of any compound known, it can absorb solar radiation to cause atmospheric warming. (2) Because it is a strong adsorber of gases, it can catalyze heterogeneous reactions to change the chemical composition of the atmosphere.(3) If aircraft are a major source of BCA, it is an important tracer of aircraft emissions. Analysis for BCA of impactor samples from Arctic and Antarctic deployments, utilizing particle morphology of scanning electron microscopy images, permits the following conclusions: (1) The BCA concentration in the northern stratosphere varies between 0 and 2.6 ng m-3 averaging 0.6 ng/cu m. (2) This BCA loading is commensurate with estimated fuel consumptions in the stratosphere by the current commercial fleet and an emission index E=0.03 g BCA per kg fuel burnt which was measured in jet exhaust at al titude.Thus, most stratospheric BCA in the northern stratosphere results from aircraft emissions. The background BCA concentration in the southern stratosphere varies between 0 and 0.6 ng cu m averaging 0.1 ng/cu m. This strong meridional gradient implies that stratospheric BCA residence time- is shorter than are mixing times between hemispheres. Projected annual fuel consumption of a future supersonic commercial fleet is 7E13 g. This fleet would increase stratospheric BCA loadings by a factor of 2-3, because almost all fuel would be burnt above the tropopause. An improved EI(BCA) by a factor of ten would result in an increase of stratospheric BCA loadings by approximately 50 %.

Pueschel, R. F.↗

NASA NTRS2012

Constraining Aerosol Optical Models Using Ground-Based, Collocated Particle Size and Mass Measurements in Variable Air Mass Regimes During the 7-SEAS/Dongsha Experiment

During the spring of 2010, NASA Goddard's COMMIT ground-based mobile laboratory was stationed on Dongsha Island off the southwest coast of Taiwan, in preparation for the upcoming 2012 7-SEAS field campaign. The measurement period offered a unique opportunity for conducting detailed investigations of the optical properties of aerosols associated with different air mass regimes including background maritime and those contaminated by anthropogenic air pollution and mineral dust. What appears to be the first time for this region, a shortwave optical closure experiment for both scattering and absorption was attempted over a 12-day period during which aerosols exhibited the most change. Constraints to the optical model included combined SMPS and APS number concentration data for a continuum of fine and coarse-mode particle sizes up to PM2.5. We also take advantage of an IMPROVE chemical sampler to help constrain aerosol composition and mass partitioning of key elemental species including sea-salt, particulate organic matter, soil, non sea-salt sulphate, nitrate, and elemental carbon. Our results demonstrate that the observed aerosol scattering and absorption for these diverse air masses are reasonably captured by the model, where peak aerosol events and transitions between key aerosols types are evident. Signatures of heavy polluted aerosol composed mostly of ammonium and non sea-salt sulphate mixed with some dust with transitions to background sea-salt conditions are apparent in the absorption data, which is particularly reassuring owing to the large variability in the imaginary component of the refractive indices. Extinctive features at significantly smaller time scales than the one-day sample period of IMPROVE are more difficult to reproduce, as this requires further knowledge concerning the source apportionment of major chemical components in the model. Consistency between the measured and modeled optical parameters serves as an important link for advancing remote sensing and climate research studies in dynamic aerosol-rich environments like Dongsha.

Bell, Shaun W.↗

NASA NTRS1983

A study of stiffness, residual strength and fatigue life relationships for composite laminates

Qualitative and quantitative exploration of the relationship between stiffness, strength, fatigue life, residual strength, and damage of unnotched, graphite/epoxy laminates subjected to tension loading. Clarification of the mechanics of the tension loading is intended to explain previous contradictory observations and hypotheses; to develop a simple procedure to anticipate strength, fatigue life, and stiffness changes; and to provide reasons for the study of more complex cases of compression, notches, and spectrum fatigue loading. Mathematical models are developed based upon analysis of the damage states. Mathematical models were based on laminate analysis, free body type modeling or a strain energy release rate. Enough understanding of the tension loaded case is developed to allow development of a proposed, simple procedure for calculating strain to failure, stiffness, strength, data scatter, and shape of the stress-life curve for unnotched laminates subjected to tension load.

Ryder, J. T.↗

NASA NTRS1980

Extraterrestrial cause for the Cretaceous-Tertiary extinction

Direct physical evidence is presented for an unusual event at exactly the time of extinctions in the planktonic realm. Deep-sea limestones exposed in Italy, Denmark, and New Zealand indicate iridium increases of about 30, 160, and 20 times, respectively, above the background level at precisely the time of the Cretaceous-Tertiary extinctions, 65 million years ago. Reasons are given that this iridium is of extraterrestrial origin, but did not come from a nearby supernova. A hypothesis is set forth which accounts for the extinctions and the iridium observations. One prediction of this hypothesis is verified, that the chemical composition of the boundary clay, which is thought to come from the stratospheric dust, is markedly different from that of clay mixed with the chemically similar Cretaceous and Tertiary limestones.

Alvarez, L. W.↗

NASA NTRS1982

Laboratory studies of interplanetary dust

The paper summarizes laboratory studies of interplanetary dust samples that have been collected from the stratosphere in the form of micrometeorites between 2 and 50 microns in size and from the sea floor in the form of particles between 100 and 3000 microns in size. Experimental results are reviewed for analyses of bulk elemental and isotopic compositions, measurements of noble gases, structure, and mineralogy. The results are shown to suggest that many of the collected particles are probably of cometary origin and that, if so, comets are fine-grained aggregates of nonvolatile building blocks and ice. Possible reasons for the lack of solar-flare tracks in the particles are briefly discussed.

Fraundorf, P.↗

NASA NTRS1995

Soot Aerosol In The Atmosphere: Pole-to-Pole Distribution And Contributions by Aircraft

Interest in the distribution of black carbon (soot) aerosol (BCA) in the atmosphere is warranted for the following reasons: (1) BCA has the highest absorption cross section of any compound known, thus it can absorb solar radiation to cause atmospheric warming; (2) BCA is a strong adsorber of gases, thus it can catalyze heterogeneous chemical reactions to modify the chemical composition of the atmosphere; (3) If aircraft emission is the major source of atmospheric BCA, it can serve as an atmospheric tracer of aircraft exhaust. We collect BCA particles greater than or equal to 0.02 micrometer diameter by wires mounted on both the DC-8 and ER-2 aircraft. After return to the laboratory, the wires are examined with a field emission scanning electron microscope to identify BCA particles by their characteristic morphology. Typically, BCA exists in the atmosphere as small particles of complex morphology. The particle sizes at the source are measured in tens of Angstrom units; after a short residence time in the atmosphere, individual particles coalesce to loosely packed agglomerates of typical dimensions 0.01 to 0.1 micrometer. We approximate the size of each BCA aggregate by that of a sphere of equivalent volume. This is done by computing the volume of a sphere whose diameter is the mean between averaged minimum and maximum dimensions of the BCA particle. While this procedure probably underestimates the actual surface area, it permits us to compare BCA size distributions among themselves and with other types of aerosols. When statistically justified, we fit lognormal distributions to the data points to determine number concentrations, geometric mean radii, standard deviations, BCA surface areas and volumes. Results to date permit the following conclusions: (1) BCA concentration in the northern stratosphere averages 0.6 ng per cubic meters. This amount is one part in 10(exp 4) after a volcanic eruption (e.g., Pinatubo) increasing to about one percent during volcanic quiescence. In the northern troposphere, BCA concentration averages 3.2 ng per cubic meters, or 0.3 percent of the background aerosol. (2) Applying an BCA emission index EI(BCA)=5 x 10(exp -5), measured in the exhaust wake of a Concorde supersonic jet aircraft, to realistic estimates of fuel burnt by the current and projected fleets permits us to conclude that: (i) Most BCA in the northern stratosphere results from aircraft emissions; (ii) Most BCA in the northern troposphere results from other sources than aircraft; (iii) A projected supersonic fleet will increase the northern stratospheric BCA concentration by one order of magnitude, unless the emission index is substantially reduced. (3) A strong gradient between the northern and southern hemispheres indicates that mixing across the equator is greatly inhibited in relation to atmospheric residence times of BCA. (4) The single scatter albedo of BCA/"background" aerosol mixtures suggests a cooling effect for most of the globe; an exemption is the Arctic because of the high surface albedo of the snow/ice covered earth's surface.

Pueschel, R. F.↗

DOE OSTI2025

Suppression of ferromagnetic correlations in hole-doped SrCo 2 As 2

We report the growth of high-quality single crystals of hole-doped composition Sr 0.95 K 0.05 Co 2 As 2 and present an investigation of its structural, electronic, thermal, and magnetic properties. Our results show that hole doping leads to a substantial suppression of ferromagnetic (FM) correlations present in SrCo 2 As 2 leading to nearly isotropic magnetic susceptibilities χ ab,c (T) of Sr 0.95 K 0.05 Co 2 As 2 . The presence of FM fluctuations is considered one of the detrimental reasons why SrCo 2 As 2 does not achieve a superconducting ground state despite having a precursor for it in the form of stripe-like antiferromagnetic fluctuations. The suppression of FM fluctuations leads to qualitative similarities between the properties of hole-doped SrCo 2 As 2 and the end member of superconducting 122 iron-arsenide family KFe 2 As 2 . Our results also infer the presence of strongly correlated electronic states in Sr 0.95 K 0.05 Co 2 As 2 . Further, they show that the electronic structure of SrCo 2 As 2 as well as this hole-doped composition is exceptionally unstable in the vicinity of Fermi level EF for small alterations in the structural parameters and sensitively depends upon the details of simulation.

36 MATERIALS SCIENCE↗

NASA NTRS1991

Toward a formal verification of a floating-point coprocessor and its composition with a central processing unit

Discussed here is work to formally specify and verify a floating point coprocessor based on the MC68881. The HOL verification system developed at Cambridge University was used. The coprocessor consists of two independent units: the bus interface unit used to communicate with the cpu and the arithmetic processing unit used to perform the actual calculation. Reasoning about the interaction and synchronization among processes using higher order logic is demonstrated.

Pan, Jing↗

DOE OSTI2024

Passivation Mechanisms in Locally Etched P-Type Poly-Si on Silicon Nitride/Silicon Oxide Stack

Tunneling oxide passivated contacts are quickly becoming the industry standard for high-efficiency c-Si based photovoltaic cells. Further development of these structures is essential to enable higher efficiencies and better reliability of cells. By utilizing poly-Si/SixNy/SiOx stacks, very high efficiencies have been demonstrated on small area cells. In this work we investigate the cause of the excellent passivation seen by these structures and show that the primary reason of the excellent passivation seen is the blocking B diffusion to the SiOx/c -Si interface. We also show that the interface between the silicon nitride and polysilicon affects B diffusion through to the c-Si interface. Finally, we demonstrate that the composition of the nitride used is of great importance, and that an incorrect nitride composition leads to B diffusion, and is directly correlated to poor passivation performance.

industries↗

NASA NTRS1987

Growth of solid solution single crystals

Based on the thermophysical properties of Hg sub 1-x Cd sub x Te alloys, the reasons are discussed for the failure of conventional Bridgman-Stockbarger growth methods to produce high quality homogeneous crystals in the presence of Earth's gravity. The deleterious effects are considered which arise from the dependence of the thermophysical properties on temperature and composition and from the large amount of heat carried by the fused silica ampules. An improved growth method, developed to optimize heat flow conditions, is described and experimental results are presented. The problems associated with growth in a gravitational environment are discussed. The anticipated advantages of growth in microgravity are given and the implications of the requirements for spaceflight experiments are summarized.

Lehoczky, S. L.↗

NASA NTRS1987

Growth of solid solution single crystals

Lehoczky, S. L.↗

NASA NTRS1988

Growth of solid solution single crystals

Based on the thermophysical properties of Hg sub 1-x Cd sub x Te alloys, the reasons are discussed for the failure of conventional Bridgman-Stockbarger growth methods to produce high quality homogeneous crystals in the prescence of Earth's gravity. The deleterious effects are considered which arise from the dependence of the thermophysical properties on temperature and composition and from the large amount of heat carried by the fused silica ampules. An improved growth method, developed to optimize heat flow conditions, is described and experimental results are presented. The problems associated with growth in a gravitational environment are discussed. The anticipated advantages of growth in microgravity are given and the implications of the requirements for spaceflight experiments are summarized.

Lehoczky, S. L.↗

NASA NTRS2009

Airborne and Ground-Based Measurements Using a High-Performance Raman Lidar: Ground Based - Part 2

The same RASL hardware as described in part I was installed in a ground-based mobile trailer and used in a water vapor lidar intercomparison campaign, hosted at Table Mountain, CA, under the auspices of the Network for the Detection of Atmospheric Composition Change (NDACC). The converted RASL hardware demonstrated high sensitivity to lower stratospheric water vapor indicating that profiling water vapor at those altitudes with sufficient accuracy to monitor climate change is possible. The measurements from Table Mountain also were used to explain the reason, and correct , for sub-optimal airborne aerosol extinction performance during the flight campaign.

Whiteman, David N.↗

NASA NTRS2021

3D Simulations of the Early Martian Hydrological Cycle Mediated by a H2-CO2 Greenhouse

For decades, the scientific community has been trying to reconcile abundant evidence for fluvialactivity on Noachian and early Hesperian Mars with the faint young Sun and reasonableconstraints on ancient atmospheric pressure and composition. Recently, the investigation of H2-CO2 collision-induced absorption has opened up a new avenue to warm Noachian Mars. We usethe ROCKE-3D global climate model to simulate plausible states of the ancient Martian climatewith this absorptive warming and reasonable constraints on surface paleopressure. We find that1.5-2 bar CO2-dominated atmospheres with ≥3% H2 can produce global mean surfacetemperatures above freezing, while also providing sufficient warming to avoid surfaceatmospheric CO2 condensation at 0°-45° obliquity. Simulations conducted with both moderntopography and a paleotopography, before Tharsis formed, highlight the importance of Tharsis asa cold trap for water on the planet. Additionally, we find that low obliquity (modern and 0°) ismore conducive to rainfall over valley network locations than high (45°) obliquity. PLAIN LANGUAGE SUMMARY Much evidence tells us that ancient Mars had liquid water on its surface. But reconciling thatwith the fainter young Sun and reasonable constraints on Mars' early atmosphere is challenging.We use a 3D global climate model with an atmosphere containing some amount of hydrogen (apossible greenhouse gas) to study Mars' early hydrological cycle and compare it to the geologicalevidence of surface liquid water billions of years ago. We find that hydrogen and carbon dioxidetogether in an atmosphere twice as thick as modern Earth can warm early Mars above thefreezing point of water and that a low axial tilt produces rainfall patterns that best match thegeologic evidence

Scott D Guzewich↗

NASA NTRS1997

The Complex Stratigraphy of the Highland Crust in the Serenitatis Region of the Moon Inferred from Mineral Fragment Chemistry

Large impact basins are natural drill holes into the Moon, and their ejecta carries unique information about the rock types and stratigraphy of the lunar crust. We have conducted an electron microprobe study of mineral fragments in the poikilitic melt breccias collected from the Taurus Mountains at the Apollo 17 landing site. These breccias are virtually unanimously agreed to be impact melt produced in the Serenitatis impact event. They contain lithic fragments and much more abundant mineral fragments of crustal origin. We have made precise microprobe analyses of minor element abundances in fragments of olivine, pyroxene, and plagioclase to provide new information on the possible source rocks and the crustal stratigraphy in the Serenitatis region. These data were also intended to elucidate the nature of the cryptic geochemical component in breccias such as these with low-K Fra Mauro basalt compositions. We chose the finest-grained (i.e., most rapidly quenched) breccias for study, to avoid reacted and partly assimilated fragments as much as possible. Most of the mineral fragments appear to have been derived from rocks that would fall into the pristine igneous Mg-suite as represented by lithic fragments in the Apollo collection, or reasonable extensions of it. Gabbroic rocks were more abundant in the target stratigraphy than is apparent from the Apollo sample collection. Some pyroxene and plagiociase, but probably not much olivine, could be derived from feldspathic granulites, which are metamorphosed polymict breccias. Some mineral fragments are from previously unknown rocks. These include highly magnesian olivines (up to Fo(sub 94)), possibly volcanic in origin, that exacerbate the difficulty in explaining highly magnesian rocks in the lunar crust. It appears that some part of the lunar interior has an mg*(= 100 x Mg/(Mg/Fe) atomic) greater than the conventional bulk Moon value of 80-84. Other volcanic rocks, including mare basalts, and rapidly- cooled impact melt rocks do not contribute significantly to the fragment population. Nor do ferroan anorthosites contribute more than a tiny part of even the plagiociase fragment population. A few mineral fragments that are consistent with the cryptic low-K Fra Mauro chemical component were found, and these appear to be from gabbroic sources. The mineral fragment populations cannot be mixed in their observed proportions to produce the whole rock composition, because the fragments are more refractory and deficient in Ti, P, and alkalis. A preferential contribution to the melt from a rock similar to sodic ferrogabbro can partly resolve the discrepancy. The population of mineral fragments requires a very diverse population of igenous rocks that are not all related to each other, demonstrating the existence of a complex crust built of numerous separate igneous plutons. Many of these plutons may have crystallized at shallow depths. The chemical composition of the melt breccias, in combination with the mineral fragment data and an understanding of the cratering process, suggests that the deepest crust sampled by the Serenitatis impace (not necessarily the deepest crust) was basaltic in composition, including KREEP and gabbroic rocks like sodic ferrogabbro, and lacking abundant olivine-rich material. These were overlain by Mg-suite rocks of varied types, including norites and troctolites that supplied most of the olivine mineral fragments. Granulities, which are metamorphosed and more feldspathic breccias, were abundant near the surface. Remote sensing indicates that the entire Serenitatis region lacks ferroan anorthosite, consistent with the results of our study.

Ryder, Graham↗

NASA NTRS1973

Evaluation and comparison of ERTS measurements of major crops and soil associations for selected sites in the central United States

The author has identified the following significant results. An unsupervised classification was run for an area around Tahoka Lake, Texas. Classes from the unsupervised were correlated with the available ground observations. Unsupervised classes which corresponded to major rangeland composition groups were used as a basis for a classification of most of Lynn County. Three classes of pasture were identified: (1) clear pasture, mostly grasses; (2) mixture of grasses and mesquite; and (3) areas of thick mesquite. In addition, one class called other included lakes and agricultural areas. It was found that differences in rangeland composition could be mapped from spectral data using computer-aided processing techniques. The T Bar Ranch, which surrounds the Double Lakes west of Tahoka, Texas, was chosen as a test area for the classification of rangeland. It was found that the classification was reasonably consistant with the low altitude oblique air photos.

Baumgardner, M. F.↗