Search NASA⌕ Search

SEARCH · Search NASA

Results for “conversion technologies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

sCO 2 Brayton Energy Conversion Customer Discovery

All energy production systems need efficient energy conversion systems. Current Rankine cycles use water to generate steam at temperatures where efficiency is limited to around 40%. As existing fossil and nuclear power plants are decommissioned due to end of effective life and/or societies’ desire for cleaner generation options, more efficient energy conversion is needed to keep up with increasing electricity demands. Modern energy generation technologies, such as advanced nuclear reactors and concentrated solar, coupled to high efficiency sCO 2 conversion systems provide a solution to efficient, clean energy systems. Leading R&D communities worldwide agree that the successful development of sCO 2 Brayton power cycle technology will eventually bring about large-scale changes to existing multi-billion-dollar global markets and enable power applications not currently possible or economically justifiable. However, all new technologies face challenges in the path to commercialization and the electricity sector is distinctively risk averse. The Sandia sCO 2 Brayton team needs to better understand what the electricity sector needs in terms of new technology risk mitigation, generation efficiency, reliability improvements above current technology, and cost requirements which would make new technology adoption worthwhile. Relying on the R&D community consensus that a sCO 2 power cycle will increase the revenue of the electrical industry, without addressing the electrical industry’s concerns, significantly decreases the potential for adoption at commercial scale. With a clear understanding of the market perspectives on technology adoption, including military, private sector, and utilities customers, the Sandia Brayton Team can resolve industry concerns for smoother development and faster transition to commercialization. An extensive customer discovery process, similar to that executed through the NSF’s I-Corp program, is necessary in order to understand the pain points of the market and articulate the value proposition of Brayton systems in terms that engage decision makers and facilitate commercialization of the technology.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2022

Chapter 11: Biochar Production

In production of biochar, thermochemical processes that can be used to treat biomass include pyrolysis, gasification, hydrothermal processing, and combustion. Each of these processes is defined by specific operating conditions (e.g., temperature, presence of oxygen) and feedstock requirements for optimal conversion to the product of primary interest. Each process results in varying fractions of gaseous, liquid, and solid products. Though other publications have emphasized the gaseous bio-energy products of such processes (e.g., bio-oil, synthesis gas or "syngas") with biochar as a co-product, in this discussion, we focus primarily on biochar as the In production of biochar, thermochemical processes that can be used to treat biomass include pyrolysis, gasification, hydrothermal processing, and combustion. Each of these processes is defined by specific operating conditions (e.g., temperature, presence of oxygen) and feedstock requirements for optimal conversion to the product of primary interest. Each process results in varying fractions of gaseous, liquid, and solid products. Though other publications have emphasized the gaseous bio-energy products of such processes (e.g., bio-oil, synthesis gas or "syngas") with biochar as a co-product, in this discussion, we focus primarily on biochar as the main product, with heat and electrical energy as co-products of secondary interest. The reasons for this are as follows: when producing biochar, heat is the simplest form of energy to capture and utilize, electrical energy can be generated from heat energy with a wide range of available technologies small and large; rather than immediately combusting the gases released from biomass, there is potential to refine the gases into bio-oil and syngas. However, much larger investments of capital are needed to build facilities for which gaseous fuel production is the primary goal, as compared to those focused on biochar production with heat and electrical energy co-products. While the economic viability of biochar production will be improved by production of high-value co-products (e.g., wood acids for use in pesticides), the simplest production scheme is one in which biochar and heat are the primary products. Here we aim to provide a broader overview of thermochemical processes and technologies most relevant to biochar production in its current state of commercialization. All biochar is a result of pyrolysis (the reaction) but not all biochar is made with a dedicated pyrolysis reactor (the technology type). Further, all biochar is the result of a lack of complete combustion (the reaction), even biochar produced in a combustion or gasification reactor (the technology type). This is an important distinction to acknowledge in the following sections in which we discuss both thermochemical conversion reactions and technology types.

biochar↗
DOE OSTI2024

Development of a machine learning model for polyethylene pyrolysis using a detailed reaction mechanism

Waste plastics have recently received significant attention as the issue of waste generation continues to increase. Thermal conversion processes, such as pyrolysis and gasification, are attractive potential technologies for utilizing waste plastics and reducing overall waste generation. Efficient utilization of plastics requires a detailed understanding of the conversion process such as pyrolysis and gasification. However, a mechanistic understanding of these processes lead to large and complex kinetic schemes that are not suited for large-scale and long-time simulation methods. Currently, most modeling approaches for pyrolysis and gasification rely on globally lumped, simplified kinetic schemes that provide results that are classified by their product type and not individual species, which limit the level of fidelity achieved via modeling. A machine learning (ML) model has been developed for the primary reactions of high-density polyethylene (HDPE) in an attempt to increase computational efficiency while still maintaining a high level of detail and accuracy. The ML model is trained on a detailed reaction mechanism containing 42 total species and 737 chemical reactions. A DeepONet branch and trunk architecture was adopted to train the model using time-steps relevant to computational fluid dynamics simulations. The ML used physics-informed loss functions to ensure mass conservation. The surrogate model has been deployed in simple MFiX CFD simulations, single particle and an experimental drop tube reactor, and has shown promising performance compared to the original scheme.

Houston, Ross↗
DOE OSTI2022

Wet Waste Hydrothermal Liquefaction and Biocrude Upgrading to Hydrocarbon Fuels: 2021 State of Technology

Each year the U.S. Department of Energy Bioenergy Technologies Office (BETO) assesses progress in their research and development efforts toward sustainable production of renewable fuels (DOE 2016) through the annual state of technology (SOT) assessment. The SOT assessment evaluates the impact of the year’s research progress on the modeled minimum fuel selling price (MFSP) for selected biofuel conversion pathways and measures the current state of the technology relative to defined goal case projections. Supply chain sustainability analysis to track and guide research toward improved greenhouse gas (GHG) emissions, energy usage, water usage and other environmental metrics for the pathway is performed by Argonne National Laboratory (Cai et al. 2018, 2020). Technical and cost targets for a projected goal case set for the year 2022 were previously established for the wet waste hydrothermal liquefaction (HTL) and biocrude upgrading pathway and summarized in a design report (Snowden-Swan et al. 2017). Process performance advancements made for HTL and biocrude hydrotreating have resulted yearly reductions in the modeled MFSP relative to the initial SOT (2018) (Snowden-Swan et al. 2020, 2021). This report summarizes the research and associated techno-economic analysis (TEA) for the pathway 2021 SOT. Methods and economic assumptions for the nth plant analysis used for the TEA are consistent with the design report (Snowden-Swan et al. 2017), with the exception of updates in the modeled cost year (2016) and income tax rate (21%).

09 BIOMASS FUELS↗
DOE OSTI2026

Energy Storage Technologies and U.S. Department of War Requirements

This report offers an overarching primer the energy storage market and assessment of each technology’s suitability for U.S. Department of War applications. We find that battery energy storage is the most promising technology for energy storage applications in terms of energy density and cost. While commercial and advanced Li-ion can satisfy certain electric mobility (e.g., cars, midsized vehicles) and electric flight application (e.g. drones) needs of DoW, next generation technologies like Li metal solid-state batteries, and conversion chemistries (Li-air, Li-CFx) are needed for heavy duty applications like armored vehicles, tanks, airplanes, jets. Batteries should also be supplemented with technologies such as supercapacitors and next-generation flywheels to provide short bursts of high energy for high power needs. Thermal energy storage solutions (sensible and latent heat) and fuel cells (PEMFC and SOFC) are good alternatives for supporting energy storage applications in terms of energy density and cost. Gravity-based energy storage promises the least energy density with high cost and should only be used for niche DoW applications. Of the different gravity energy storage technologies reviewed, pumped-hydro, flywheel, and compressed air energy storage are promising, while solid gravity energy storage appears the least attractive. Military facilities requiring 14 days of energy storage can benefit from flow batteries, especially commercial VFRBs and next generation iron-air systems. While VFRBs are expensive, iron-air batteries have the coupled benefits of low cost and good energy density promising 100+ hours of storage.

25 ENERGY STORAGE↗
DOE OSTI2025

Economic and environmental performance of biomass gasification for renewable natural gas production in the context of the U.S. natural gas supply

Bioenergy technologies offer potential for reducing greenhouse gas (GHG) emissions. One such promising technology is biomass gasification, which is the conversion of biomass into renewable natural gas (RNG) for use with a natural gas combined-cycle power generation system. However, the associated economic and emission effects need to be better understood to enable optimal decision-making and avoid missed opportunities for enhancing efficiency and increasing system circularity. This analysis explores opportunities to (1) decarbonize natural-gas-based systems and (2) leverage the extensive US natural gas infrastructure to mobilize biomass resources to achieve environmental and economic benefits. Here, in this analysis, the research team used a spatially explicit biomass logistics model (integrated with relevant biomass availability, technoeconomic analysis, and life cycle assessment information) to simulate economically optimal biomass allocation for RNG production and use for decarbonization in the United States. Results show that the United States has the potential to produce 9203 million GJ of RNG within the expected range of $\$$12–30/GJ. Further analyses tested the overall RNG production system's sensitivity to economic and emissions parameters of nine different processes. The sensitivity analysis results indicate that the median carbon abatement cost of RNG is most sensitive to changes in emissions associated with conversion processes and land use changes. These findings provide a deeper understanding of RNG's economic and emission potential for decision-making and guiding future research.

09 BIOMASS FUELS↗
DOE OSTI2020

High-Efficiency Silicon Heterojunction Solar Cells: Materials, Devices and Applications

Photovoltaic (PV) technology offers an economic and sustainable solution to the challenge of increasing energy demand in times of global warming. The world PV market is currently dominated by the homo-junction crystalline silicon (c-Si) PV technology based on high temperature diffused p-n junctions, featuring a low power conversion efficiency (PCE). Recent years have seen the successful development of Si heterojunction technologies, boosting the PCE of c-Si solar cells over 26%. This article reviews the development status of high-efficiency c-Si heterojunction solar cells, from the materials to devices, mainly including hydrogenated amorphous silicon (a-Si:H) based silicon heterojunction technology, polycrystalline silicon (poly-Si) based carrier selective passivating contact technology, metal compounds and organic materials based dopant-free passivating contact technology. The application of silicon heterojunction solar cells for ultra-high efficiency perovskite/c-Si and III-V/c-Si tandem devices is also reviewed. In the last, the perspective, challenge and potential solutions of silicon heterojunction solar cells, as well as the tandem solar cells are discussed.

14 SOLAR ENERGY↗
DOE OSTI2022

Experimental Search for Neutron to Mirror Neutron Oscillations as an Explanation of the Neutron Lifetime Anomaly

We report an unexplained >4σ discrepancy persists between “beam” and “bottle” measurements of the neutron lifetime. A new model proposed that conversions of neutrons n into mirror neutrons n', part of a dark mirror sector, can increase the apparent neutron lifetime by 1% via a small mass splitting Δm between n and n' inside the 4.6 T magnetic field of the National Institute of Standards and Technology Beam Lifetime experiment. A search for neutron conversions in a 6.6 T magnetic field was performed at the Spallation Neutron Source which excludes this explanation for the neutron lifetime discrepancy.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

High-pressure CO 2 dissociation with nanosecond pulsed discharges

Herein we investigate the conversion of CO 2 into CO and O 2 with nanosecond repetitively pulsed (NRP) discharges in a high-pressure batch reactor. Stable discharges are obtained at up to 12 bar. By-products are measured with gas chromatography. The energy efficiency is determined for a range of processing times, pulse energy, and fill pressures. It is only weakly sensitive to the plasma operating parameters, i.e the extent of CO 2 conversion is almost linearly-dependent on the specific energy invested. A conversion rate as high as 14% is achieved with an energy efficiency of 23%. For long processing times, saturation in the yield and a drop in efficiency are observed, due to the increasing role of three-body recombination reactions, as described by zero-dimensional detailed kinetic modeling. The modeling reveals the presence of three-stage kinetics between NRP pulses, controlled by electron-impact CO 2 dissociation, vibrational relaxation, and neutral elementary kinetics. Transport effects are shown to be important for CO 2 conversion at high pressures. For fill pressures beyond 10 bar, CO 2 may locally transit into supercritical states. The supercritical plasma kinetics may bypass atomic oxygen pathways and directly convert CO 2 into O 2 . This work provides a detailed analysis of plasma-based high-pressure CO 2 conversion, which is of great relevance to future large-scale sustainable carbon capture, utilization, and storage.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Techno-Economic Analysis and Life-Cycle Assessment of Emerging Technologies for Bioprocessing Separations

Limited availability, rising costs, and environmental concerns about fossil fuels have generated considerable interest in finding alternative, renewable sources including biomass, which can be converted into a number of biofuels and bioproducts. In comparison to petroleum-based products, high processing costs, mainly associated with bioprocessing separations, limit widespread implementation of biofuels and bioproducts. Bioprocess-related separations are also complicated, regardless of the conversion pathway, due to the dilute nature of products and the chemically complex mixtures that result from biomass deconstruction. In many cases, bioprocessing separation approaches lack a technology baseline, or definition of the state of technology (SOT). This work focuses on evaluating the technology readiness of novel separations technologies for the conversion of biomass into biofuels and bioproducts and will address three key topics: 1) SOT description, 2) economic viability analysis of both SOT and innovative separations, and 3) environmental impact assessment of both SOT and novel processes. The current SOT for lignin valorization, dilute carbon recovery, and impurity removal is used to identify potential opportunities for improvement and provide a baseline for comparison with the emerging technologies. Detailed techno-economic analysis (TEA) and life cycle assessment (LCA) are applied to understand the key drivers and challenges related to the economic feasibility and environmental impacts, respectively.

BASIC BIOLOGICAL SCIENCES,BIOMASS FUELS↗
DOE OSTI2020

Spatial Atomic Layer Deposition to Scale Manufacturing of Robust Catalysts for Biomass Conversion Applications: Cooperative Research and Development Final Report, CRADA Number CRD-17-715

This CRADA will facilitate technology maturation for NREL-developed ALD-coated catalyst materials that are tailored for durability during harsh biomass conversion chemistries. This project will address optimizing process parameters for scale-up of Al2O3 ALD-coated catalysts, demonstrating ALD-coated catalyst performance for muconic acid hydrogenation, and validating economic models that project significant cost benefits for ALD-enhanced catalytic processes. This work will strengthen private-public partnerships in the area of advanced catalyst manufacturing for energy-related technology. Critical information will be collected to elevate the Technology Readiness Level and increase our competitiveness for cooperative R&D agreements and licensing. Success of this work will be crosscutting as it can facilitate advanced catalyst development for both renewable and conventional processes.

09 BIOMASS FUELS↗
DOE OSTI2026

The Relationship Between Catalyst and Solvent in Hydrogenation via Condensed Phase Heterogeneous Catalysis

To understand a system is to understand its components and their sum. Cascading interactions between catalyst, solvent, and reagent create a complex web of influences when heterogeneous catalysis meets the condensed phase. Due to the importance of heterogeneous catalysis in chemical manufacturing, and the present and growing potential of condensed phase chemistries, the understanding of these interactions is of paramount importance. To develop condensed phase heterogeneous catalysis, the field needs to develop understanding of the role of solvent in heterogeneous catalytic hydrogenation. While no small feat, fields such as biofuel and petroleum refining have established certain applicable generalities that can bridge the knowledge gap in emerging technologies such as integrated carbon capture and conversion to materials (IC 3 M). In this review, we thoughtfully probe the current paradigm of condensed phase catalysis by challenging the idea that catalyst and solvent are independent reaction design choices. Challenges such as lack of experimental stability studies and poor resolution on our conceptualization of the condensed phase environment are discussed. Parameters such as viscosity and the dielectric constant, and their role on reaction activity and stability are explored. Knowledge gained from established biomass and petroleum processes is discussed and used to anticipate behavior in novel processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Light–Material Interactions Using Laser and Flash Sources for Energy Conversion and Storage Applications

Abstract This review provides a comprehensive overview of the progress in light–material interactions (LMIs), focusing on lasers and flash lights for energy conversion and storage applications. We discuss intricate LMI parameters such as light sources, interaction time, and fluence to elucidate their importance in material processing. In addition, this study covers various light-induced photothermal and photochemical processes ranging from melting, crystallization, and ablation to doping and synthesis, which are essential for developing energy materials and devices. Finally, we present extensive energy conversion and storage applications demonstrated by LMI technologies, including energy harvesters, sensors, capacitors, and batteries. Despite the several challenges associated with LMIs, such as complex mechanisms, and high-degrees of freedom, we believe that substantial contributions and potential for the commercialization of future energy systems can be achieved by advancing optical technologies through comprehensive academic research and multidisciplinary collaborations.

Materials Science↗
DOE OSTI2022

Improved valorization of sewage sludge in the circular economy by anaerobic digestion: Impact of an innovative pretreatment technology

Anaerobic digestion (AD) of sewage sludge shows low carbon conversion efficiency (CCE) due to the poor biodegradability of sewage sludge. Here, the lack of digestibility is specifically linked to the waste-activated sludge (WAS) making up the majority of sewage sludge along with a smaller portion of primary sludge, depending on the wastewater treatment plant configuration. In this study, we examine the Advanced Wet Oxidation & Steam Explosion process (AWOEx) for improving the CCE of digested sewage sludge (DSS) by thermophilic AD. The effect of the pretreatment temperature in the range between 160 and 185 °C at a fixed residence time of 20 min with and without oxygen added at a dosage of 5 % of the organics present was tested. Methane yield improved by 97.92 % to 183.91 ± 4.93 mL/g vS over the untreated DSS (control), whose methane yield was 92.92 ± 9.07 mL/g vS We have demonstrated for the first time that 84 % of the organics in sewage sludge can successfully be transformed into biogas following AWOEx pretreatment, which can contribute significantly to the circular economy instead of greenhouse gas emissions from landfilling.

09 BIOMASS FUELS↗
DOE OSTI2025

Theoretical and Experimental Insights into CO 2 Capture and Methanation over Amine-Grafted Ru-Based Catalysts

Carbon capture and storage (CCS) technologies, along with CO 2 capture and conversion methods, have emerged as crucial research areas to address rising CO 2 emissions. In this study, we seek to understand the mechanistic role of amines in enabling lower-energy pathways for CO 2 conversion. Our research focuses on the development and analysis of dual-functional materials (DFMs) engineered for the reactive capture and conversion (RCC) of CO 2 into methane, utilizing Ru catalysts grafted with amine groups. We employ Density Functional Theory (DFT) calculations using methylamine as a model amine to investigate the impact of amine groups on CO 2 methanation on a Ru(0001) surface, both in the presence and absence of amine groups. The amine ligand alters the carbon coordination environment, promoting direct C–O dissociation and potentially destabilizing the CO* adsorbate, thereby reducing the risk of CO poisoning. Additionally, we observe a preference for hydrogenation, although it becomes more energetically uphill in the amine-bound scenario. Our experiments, however, report similar CO 2 conversion and CH 4 production rates over the synthesized catalysts “Ru/TiO 2 ” and the amine (N-(2-aminoethyl)-3-aminoproplytrimethoxysilane (“diaminosilane”)) deposited catalyst “Diamine−Ru/TiO 2 ”. By constructing comparative reaction-free energy diagrams and performing microkinetic modeling (MKM) simulations, we link our theoretical findings with experimentally observed CO 2 uptake, conversion, and methane production rates. A microkinetic model was employed to investigate the anomaly, showing reduced amine–carbon complex coverage and increased CO 2 coverage at all temperatures. The MKM simulations consistently confirmed these trends. In conclusion, this comprehensive approach offers key insights into the role of the amine-CO 2 bond in methanation, highlighting a pathway toward lower-energy, more efficient CO 2 capture and conversion processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Perovskite Solar Cells with Enhanced Fill Factors Using Polymer-Capped Solvent Annealing

Despite huge improvements in power conversion efficiencies of perovskite solar cells, the technology is still limited by fill factors at around 80%. In this work, we report perovskite solar cells having exceptionally high fill factors of 85% and enhanced open-circuit voltage without sacrificing short-circuit current through a polymer-capped solvent-annealing process assisted by a hot air blower. Additionally, during the solvent-annealing, the perovskite surface flattens and the perovskite grains agglomerate into micrometer-sized clusters having enlarged α-phase crystallites, while the δ-phase simultaneously disappears. The optimized structure reduces energetic disorder and trap-assisted recombination in the perovskite layer, resulting in an enhanced efficiency from 18.2% to 19.8% and improved device lifetime. Our results provide a pathway to increase the device efficiency and stability of perovskite solar cells, and have the potential to stimulate research on scalable poly-crystal perovskite layer fabrication in optoelectronic devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Sustainable Lactic Acid Production from Lignocellulosic Biomass

Lignocellulosic biomass is a promising feedstock for sustainable biofuels and bioproducts. Among emerging bioproducts, lactic acid has attracted significant interest because of its growing application in many industries (e.g., packaging, medical, and pharmaceutical). In this study, BioSTEAM—an open-source platform—was leveraged for the design, simulation, and evaluation (via techno-economic analysis, TEA, and life cycle assessment, LCA) of lignocellulosic lactic acid biorefineries. With a minimum product selling price (MPSP) between 1.38 and 1.91 kg –1 (5th–95th percentiles, baseline at 1.57 kg –1 ), the biorefinery was capable of producing market-competitive lactic acid (market price between 1.7 and 2.1 kg –1 ), and its performance could be further enhanced (e.g., MPSP down to 1.09 kg –1 , global warming potential of 2.79 kg CO 2 -eq·kg –1 , and fossil energy consumption of 31.7 MJ·kg –1 ) with advancements in key technological parameters (fermentation yield and separation process conversions) and optimization in process operation. Sensitivity analyses focused on the fermentation unit (across titer, yield, and productivity; neutral vs low-pH fermentation) and feedstock characteristics (carbohydrate content and price) were also included to quantify their impact on the sustainability of the biorefinery. Overall, this research highlights the ability of agile TEA/LCA to screen promising biorefinery designs, prioritize research needs, and establish a road map for the continued development of bioproducts and biofuels.

09 BIOMASS FUELS↗