SEARCH · Search NASA

Results for “coordinated”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

All sources NASA NTRS DOE OSTI

NASA NTRS1982

General curvilinear coordinate systems

The basic ideas of the construction and use of numerically-generated boundary-fitted coordinate systems for the numerical solution of partial differential equations are discussed. With such coordinate systems, all computation can be done on a fixed square grid in the rectangular transformed region regardless of the shape or movement of the physical boundaries. A number of different types of configurations for the transformed region and the basic transformation relations from a cartesian system to a general curvilinear system are given. The material of this paper is applicable to all types of coordinate system generation.

Thompson, J. P.↗

NASA NTRS1982

Error induced by coordinate systems

It is pointed out that the choice of a curvilinear coordinate system can have a substantial effect on the error in the numerical solution of a partial differential equation. The truncation error is dependent not only on the higher order derivatives of the solution and the local grid spacing, but also on the rate-of-change of the grid spacing and on the departure of the grid from orthogonality. In connection with the present investigation, an analysis is conducted of the local truncation error in the approximation of first and second order derivatives on a curvilinear grid. Attention is given to a number of examples which illustrate the two fundamental sources of truncation error in the numerical solution of partial differential equations on curvilinear coordinate systems. The first is the grid spacing and changes in grid spacing which is measured by the first and second order derivatives of the functions defining the coordinate system. The second source is the higher order derivatives of the solution itself.

Mastin, C. W.↗

NASA NTRS1982

Reference coordinate systems for Earth dynamics: A preview

Geodynamics is the subject of intensive international research during last decade. A common requirement for all investigations is the necessity of a well defined coordinate system attached to the Earth in some prescribed way. In addition, a well defined inertial coordinate system is also needed in which the motions of the terrestrial system can be monitored. The problems encountered when establishing such coordinate systems and the transformations between them are presented. In addition, problems related to the modeling of the deformable Earth are discussed. Finally, action items are listed which are necessary to assure that the reference system issue is resolved early and that uniformity is assured by means of international agreements.

Mueller, I. I.↗

NASA NTRS1983

Evaluating multiple coordinated windows for programming workstations

Programmers might benefit from larger screens with multiple windows or multiple screens, especially if convenient coordination among screens are arranged. Uses for multiple coordinated displays in a programmers workstation are explored. Initial efforts focus on the potential applications, a command language for coordinating the displays, and the psychological basis for effective utilization so as to avoid information overload. Subsequent efforts will be devoted to implementing the concepts and performing controlled psychologically oriented experiments to validate the hypotheses.

Shneiderman, B.↗

NASA NTRS1984

Coordination of Fe, Ga and Ge in high pressure glasses by Moessbauer, Raman and X-ray absorption spectroscopy, and geological implications

For some time, it has been recognized that the structure of silicate liquids has a great bearing on such magma properties as viscosity, diffusivity, and thermal expansion and on the extrapolation of thermodynamic quantities outside of the experimentally measurable range. In this connection it is vital to know if pressure imposes changes in melt structure similar to the pressure-induced reconstructive transformations in crystals. In the present study on 1 bar and high pressure glasses, an investigation is conducted regarding the coordination of Fe(3+) in Fe silicate glasses by Moessbauer spectroscopy. Raman spectroscopy is employed to explore the coordinations of Ge(4+) in GeO2 glasses and of Ga(3+) in NaGa silicate glasses, while the coordination of Ga(3+) in NaGaSiO4 glasses is studied with the aid of methods of X-ray absorption spectroscopy.

Fleet, M. E.↗

NASA NTRS1986

Aircrew coordination and decisionmaking: Peer ratings of video tapes made during a full mission simulation

Six professionally active, retired captains rated the coordination and decisionmaking performances of sixteen aircrews while viewing videotapes of a simulated commercial air transport operation. The scenario featured a required diversion and a probable minimum fuel situation. Seven point Likert-type scales were used in rating variables on the basis of a model of crew coordination and decisionmaking. The variables were based on concepts of, for example, decision difficulty, efficiency, and outcome quality; and leader-subordin ate concepts such as person and task-oriented leader behavior, and competency motivation of subordinate crewmembers. Five-front-end variables of the model were in turn dependent variables for a hierarchical regression procedure. The variance in safety performance was explained 46%, by decision efficiency, command reversal, and decision quality. The variance of decision quality, an alternative substantive dependent variable to safety performance, was explained 60% by decision efficiency and the captain's quality of within-crew communications. The variance of decision efficiency, crew coordination, and command reversal were in turn explained 78%, 80%, and 60% by small numbers of preceding independent variables. A principle component, varimax factor analysis supported the model structure suggested by regression analyses.

Murphy, M. R.↗

NASA NTRS1986

A pattern-matching algorithm for two-dimensional coordinate lists

A pattern-matching algorithm for two-dimensional coordinate lists is described. The algorithm matches pairs of coordinates in two lists based on the triangles that can be formed from triplets of points in each list. The algorithm is insensitive to coordinate translation, rotation, magnification, or inversion and can tolerate random errors or distortions.

Groth, E. J.↗

NASA NTRS1986

A proposal for adopting a standard coordinate system for defining atmospheric nomenclature for the giant planets

Although the albedo of specific belts and zones varies as a function of time, there is evidence that wind maxima may be fixed in latitude. Before considering a standard notation for wind jets, it is necessary to establish a coordinate system within which the nomenclature would be defined. Traditionally, the BAA has used planetographic latitudes; however, this system is based not only on an accurate determination of the polar diameter but also on the assumption that the equipotential surfaces can be represented by biaxial ellipsoids. The International Astronomical Union strives to adopt unambiguous nomenclature that will be universally acceptable. It is proposed that planetocentric coordinates be utilized and that a standardized value of the ratio of the polar diameter to the equatorial diameter be established for each planet to facilitate transformation into planetographic coordinates.

Beebe, R.↗

NASA NTRS1987

Numerical simulation of transonic propeller flow using a 3-dimensional small disturbance code employing novel helical coordinates

The numerical simulation of three-dimensional transonic flow about propeller blades is discussed. The equations for the unsteady potential flow about propellers is given for an arbitrary coordinate system. From this the small disturbance form of the equation is derived for a new helical coordinate system. The new coordinate system is suited to propeller flow and allows cascade boundary conditions to be applied straightforward. A numerical scheme is employed which solves the steady flow as an asymptotic limit of unsteady flow. Solutions are presented for subsonic and transonic flow about a 5 percent thick bicircular arc blade of an eight bladed cascade. Both high and low advance ratio cases are given which include a lifting case as well as nonlifting cases. The nonlifting cases are compared to solutions from a Euler code.

Snyder, Aaron↗

NASA NTRS1987

Changes in measured vector magnetic fields when transformed into heliographic coordinates

The changes that occur in measured magnetic fields when they are transformed into a heliographic coordinate system are investigated. To carry out this investigation, measurements of the vector magnetic field of an active region that was observed at 1/3 the solar radius from disk center are taken, and the observed field is transformed into heliographic coordinates. Differences in the calculated potential field that occur when the heliographic normal component of the field is used as the boundary condition rather than the observed line-of-sight component are also examined. The results of this analysis show: (1) that the observed fields of sunspots more closely resemble the generally accepted picture of the distribution of umbral fields if they are displayed in heliographic coordinates; (2) that the differences in the potential calculations are less than 200 G in field strength and 20 deg in field azimuth outside sunspots; and (3) that differences in the two potential calculations in the sunspot areas are no more than 400 G in field strength but range from 60 to 80 deg in field azimuth in localized umbral areas.

Hagyard, M. J.↗

NASA NTRS1987

Numerical simulation of transonic propeller flow using a three-dimensional small disturbance code employing novel helical coordinates

Snyder, Aaron↗

NASA NTRS1987

Motion coordination and programmable teleoperation between two industrial robots

Tasks for two coordinated industrial robots always bring the robots in contact with a same object. The motion coordination among the robots and the object must be maintained all the time. To plan the coordinated tasks, only one robot's motion is planned according to the required motion of the object. The motion of the second robot is to follow the first one as specified by a set of holonomic equality constraints at every time instant. If any modification of the object's motion is needed in real-time, only the first robot's motion has to be modified accordingly in real-time. The modification for the second robot is done implicitly through the constraint conditions. Thus the operation is simplified. If the object is physically removed, the second robot still continually follows the first one through the constraint conditions. If the first robot is maneuvered through either the teach pendant or the keyboard, the second one moves accordingly to form the teleoperation which is linked through the software programming. Obviously, the second robot does not need to duplicate the first robot's motion. The programming of the constraints specifies their relative motions.

Luh, J. Y. S.↗

NASA NTRS1989

Revised coordinates for 373 selected objects in the Southern Galaxy Catalogue

Improved positions have been determined for 373 galaxies listed in the Southern Galaxy Catalogue of Corwin et al. (1985) as having poor coordinates. The revised coordinates are expected to be good to 6 arcsec (rms) in each coordinate.

Spellman, Kathleen↗

NASA NTRS1991

A picosecond accuracy relativistic VLBI model via Fermi normal coordinates

Fermi normal coordinates are used to construct transformations relating solar system barycentric coordinates to local inertial geocentric coordinates. Relativistic corrections to terrestrial VLBI measurements are calculated, and this formalism is developed to include corrections needed for picosecond accuracy. A calculation of photon time delay which includes effects arising from the motion of gravitational sources is given.

Shahid-Saless, Bahman↗

NASA NTRS1992

A doubly averaging method for third body perturbations in planet equator coordinates

The first order doubly averaged potential due to third-body gravity is derived in any arbitrary coordinates. The equations of motion are nonsingular at zero eccentricity. The derivation uses a recursive method which allows easy expansion to higher order terms. Instead of using analytical quadrature to obtain the doubly averaged potential, the method presented in this paper simply eliminates the mean anomaly of the perturbed and perturbing bodies by inspection of the recursive formulation. The derivatives of the orbital elements can be numerically integrated rapidly. When a planet equator coordinate system is used, they can be added directly to the derivatives due to gravity harmonics without any coordinate transformation. The method is applied to various high altitude missions. The results are compared with a high precision numerical integration method and are found to provide excellent agreement.

Hwok, Johnny H.↗

NASA NTRS1993

Use of global positioning system measurements to determine geocentric coordinates and variations in Earth orientation

Geocentric tracking station coordinates and short-period Earth-orientation variations can be measured with Global Positioning System (GPS) measurements. Unless calibrated, geocentric coordinate errors and changes in Earth orientation can lead to significant deep-space tracking errors. Ground-based GPS estimates of daily and subdaily changes in Earth orientation presently show centimeter-level precision. Comparison between GPS-estimated Earth-rotation variations, which are the differences between Universal Time 1 and Universal Coordinated Time (UT1-UTC), and those calculated from ocean tide models suggests that observed subdaily variations in Earth rotation are dominated by oceanic tidal effects. Preliminary GPS estimates for the geocenter location (from a 3-week experiment) agree with independent satellite laser-ranging estimates to better than 10 cm. Covariance analysis predicts that temporal resolution of GPS estimates for Earth orientation and geocenter improves significantly when data collected from low Earth-orbiting satellites as well as from ground sites are combined. The low Earth GPS tracking data enhance the accuracy and resolution for measuring high-frequency global geodynamical signals over time scales of less than 1 day.

R P Malla↗

NASA NTRS1993

The piecewise-parabolic method in curvilinear coordinates

We derive interpolation formulae for a third-order finite difference method in curvilinear, orthogonal coordinate systems. These formulae serve as a supplement to Colella and Woodward's PPM scheme for problems where the coordinate origin is included in the computational domain. Numerical examples of the improved accuracy of the advection scheme near coordinate singularities are shown.

Blondin, John M.↗

NASA NTRS1991

Coordination of human upper arm and forearm motion in rapid extensions

In many movements of the upper limb such as reaching, positioning, and displacing the objects, the hand moves smoothly along a uni-directional planar trajectory with a bell-shaped speed profile. Because of variability of the load, gravitational and velocity interaction forces between its segments, the dynamics of the arm during the motion is very complex. Motion of the upper arm and the forearm are coordinated to produce smooth movements despite such complex dynamics. This coordination constitutes an important organizational feature of arm movement. The present paper describes some experimental results related to the above and interprets their role in producing smooth motion of the hand. Trajectories of the right upper limb in vertical plane and the simultaneous muscles' EMG activities were recorded for extensions of various amplitudes under four loads. The forearm trajectories are smooth with bell-shaped speed profiles. The upper arm trajectories may have bimodal speed profiles and three segments, resembling an inverted 'Z.' Segmentation is sharper for the points near the shoulder joint, and is accentuated by load. As one moves from the central points near the shoulder joint to the peripheral points near the hand, the three segments merge and result in smooth curves with single-peaked speed profiles. The three segments have a coherent time course and can be identified rather accurately and non-ambiguously. The observed trajectories and the EMG patterns reveal an effective coordination strategy which utilizes the structure and the dynamics of the moving arm to produce smooth movement.

Nahvi, Mahmood↗