Search NASA⌕ Search

SEARCH · Search NASA

Results for “data analytics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Advanced propeller research

Resent results of aerodynamic and acoustic research on both single and counter-rotation propellers are reviewed. Data and analytical results are presented for three propellers: SR-7A, the single rotation design used in the NASA Propfan Test Assessment (PTA); and F7-A7, the 8+8 counterrotating design used in the proof-of-concept Unducted Fan (UDF) engine. In addition to propeller efficiencies, cruise and takeoff noise, and blade pressure data, off-design phenomena involving formation of leading edge vortices are described. Aerodynamic and acoustic computational results derived from three-dimensional Euler and acoustic radiation codes are presented. Research on unsteady flows, which are particularly important for understanding counterrotation interaction noise, unsteady loading effects on acoustics, and flutter or forced response is described. The first results of three-dimensional unsteady Euler solutions are illustrated for a single rotation propeller at an angle of attack and for a counterrotation propeller. Basic experimental and theoretical results from studies of the unsteady aerodynamics of oscillating cascades are outlined. Finally, advanced concepts involving swirl recovery vanes and ultra bypass ducted propellers are discussed.

Groeneweg, John F.↗

Failure of compression-loaded multi-directional composite laminates

An analytical and experimental investigation of the failure of selected compression-loaded composite laminates is described. A general nonlinear theory is presented for predicting a laminate's compressive strength and failure mode. The theory includes the effects of out-of-plane ply waviness, inplane fiber waviness, and fiber scissoring. A simple compressive test technique is used to obtain the experimental data. The analytical and experimental results show good agreement for theta less than 45 deg and show excellent agreement for theta not less than 45 deg. The dominant compression failure modes for the laminates in this study were found to be interlaminar shearing, inplane matrix shearing, and matrix compression.

Shuart, Mark J.↗

Studies of asteroids and comets

About 3000 accurate positions of asteroids and comets were measured concentrating particularly on close-Earth approachers, but also targeting asteroids in need for follow-up observations because of unusual orbital characteristics or poor observational history. In 1985, 36 of the discoveries were numbered. Very accurate + or - 0.1 arcsec?) positional measurements were made of P/Halley on four nights in November and December 1985 in support of Giotto mission navigation. The asteroid orbit files were maintained, and ephemeris data for observational planning were supplied to colleagues worldwide. Considerable progress was made in understanding how information on asteroid shapes, surface albedo variegation, and rotational states can be derived from lightcurve and phase curve data. The analytical formulation was completed of a new asteroid magnitude system for the International Astronomical Union; the system was adopted at the New Delhi General Assembly by IAU Commission 20. Photographic photometry of about 10000 images of faint asteroids observed during the course of the United Kingdom Schmidt-CalTech Asteroid Survey in 1981 was continued, completing the microdensitometric scanning and all process of software development for data handling.

Bowell, E. L. G.↗

Advanced propeller research

Recent results of aerodynamic and acoustic research on both single rotation and counterrotation propellers are reviewed. Data and analytical results are presented for three propellers: SR-7A, the single rotation design used in the NASA Propfan Test Assessment (PTA) flight program; CRP-X1, the initial 5+5 Hamilton Standard counterrotating design; and F7-A7, the 8+8 counterrotating G.E. design used in the proof of concept Unducted Fan (UDF) engine. In addition to propeller efficiencies, cruise and takeoff noise, and blade pressure data, off-design phenomena involving formation of leading edge vortexes are described. Aerodynamic and acoustic computational results derived from 3-D Euler and acoustic radiation codes are presented. Research on unsteady flows which are particularly important for understanding counterrotation interaction noise, unsteady loading effects on acoustics, and flutter or forced response is described. The first results of 3-D unsteady Euler solutions are illustrated for a single rotation propeller at angle of attack and for a counterrotation propeller. Basic experimental and theoretical results from studies on the unsteady aerodynamics of oscillating cascades are outlined.

Groeneweg, John F.↗

An “EPIIC” Vision to Evolve Project Integration, Innovation, and Collaboration with Broad Impact for How NASA Executes Complex Projects

Evolving Project Integration, Innovation, and Collaboration (EPIIC) is a vision defined to transform the way projects manage information to support real-time decisions, capture best practices and lessons learned, perform assessments, and manage risk across a portfolio of projects. The foundational project management needs for data and information will be revolutionized through innovations on how we manage and access that data, implement configuration control, and certify compliance. The embedded intelligence of new interactive data interfaces integrate technical and programmatic data such that near real time analytics can be accomplished to more efficiently and accurately complete systems engineering and project management tasks. The system-wide data analytics that are integrated into customized data interfaces allows the growing team of engineers and managers required to develop and implement major NASA missions the ability to access authoritative source(s) of system information while greatly reducing the labor required to complete system assessments. This would allow, for example, much of what is accomplished in a scheduled design review to take place as needed, between any team members, at any time. An intelligent data interface that rigorously integrates systems engineering and project management information in near real time can provide substantially greater insight for systems engineers, project managers, and the large diverse teams required to complete a complex project. System engineers, programmatic personnel (those who focus on cost, schedule, and risk), the technical engineering disciplines, and project management can realize immediate benefit from the shared vision described herein. Implementation of the vision also enables significant improvements in the performance of the engineered system being developed.

Moreland, Robert J.↗

Shock Location Dominated Transonic Flight Loads on the Active Aeroelastic Wing

During several Active Aeroelastic Wing research flights, the shadow of the over-wing shock could be observed because of natural lighting conditions. As the plane accelerated, the shock location moved aft, and as the shadow passed the aileron and trailing-edge flap hinge lines, their associated hinge moments were substantially affected. The observation of the dominant effect of shock location on aft control surface hinge moments led to this investigation. This report investigates the effect of over-wing shock location on wing loads through flight-measured data and analytical predictions. Wing-root and wing-fold bending moment and torque and leading- and trailing-edge hinge moments have been measured in flight using calibrated strain gages. These same loads have been predicted using a computational fluid dynamics code called the Euler Navier-Stokes Three Dimensional Aeroelastic Code. The computational fluid dynamics study was based on the elastically deformed shape estimated by a twist model, which in turn was derived from in-flight-measured wing deflections provided by a flight deflection measurement system. During level transonic flight, the shock location dominated the wing trailing-edge control surface hinge moments. The computational fluid dynamics analysis based on the shape provided by the flight deflection measurement system produced very similar results and substantially correlated with the measured loads data.

Lokos, William A.↗

A Knowledge Graph Framework for Organizing Heterogeneous Datasets for Utilization in Classical and Quantum Computing: Current Challenges and Future Directions

"The escalating impact of climate change induced extreme weather events in urban, suburban, and rural environments demands a rethink of how we have been using the single event-based or use-case-based knowledge graph models. The lack of representation in interaction within environmental variables found in literature led to the development of a novel framework that reflects the true nature of the interconnectedness in our environment. We propose an Environmental Interaction Knowledge Graph (EIKG) framework. This general EIKG framework works as the basis for interconnected environmental events by knitting interrelated events such as hurricanes leading to storm surges, which lead to flood events that could cause mudslides, landslides, etc., The cascading nature of one event leading to another related event in the environment requires an adequate understanding of each event using contextual information before conducting any data-driven analytics. This vision paper showcases how the EIKG:floods, EIKG:wildfire EIKG:landslides, etc, can be derived from a base case framework of EIKG as those individual events are interconnected with some common denominator variables. As an example, the precipitation variable is used in the flood case study as well as in the wildfire case study, as excessive precipitation levels lead to floods, and lack of precipitation leads to droughts and wildfires. We identify the precipitation variable as a “common-denominator-variable” in extreme weather events that play a key role in modeling the environment leading to different extreme weather events based on the variability of that variable (varying values where low precipitation leads to drought, and high values lead to floods). We use the insights gained from EIKG to conduct classical and Quantum Machine Learning (QML) based data analysis on the research questions developed. Our preliminary study shows how the Variational Quantum Classifier (VQC) and Quantum Support Vector Classifier (QSVC) are used along with the classical machine learning models to compare the model accuracies. Our study elaborates on how a quantitative analysis uses state-of-the-art machine learning techniques that include implementing both classical and quantum machine learning models and developing the knowledge graph. The EIKG is used to organize heterogeneous datasets and integrate the relations to case-specific extreme weather events such as floods. The study uses datasets such as county-to-country residential mobility data, socioeconomic datasets from the US Census Bureau, climate and weather-related Earth Observational data from NASA, and critical infrastructure data from the Homeland Infrastructure datasets."

Knowledge Graphs, Quantum Computing, Heterogenous ↗

Improvement of a large dynamic analytical model using ground vibration test data

A method has been developed which uses measured normal modes and natural frequencies to improve an analytical mass and stiffness matrix model of a structure. The method directly identifies, without iteration, a set of minimum changes in the analytical matrices which force the eigensolutions to agree with the test measurements. An application is presented in which the analytical model had 508 degrees of freedom and 19 modes were measured at 101 locations on the structure. The resulting changes in the model are judged to be small compared to expectations of errors in the analysis. Thus the improved model is accepted as a reasonable model of the structure with improved dynamic response characteristics. In addition, it is shown that the procedure may be a useful tool in identifying apparent measured modes which are not true normal modes of the structures.

Berman, A.↗

Improved scaling laws for stage inert mass of space propulsion systems. Volume 2: System modeling and weight data

Technical models and analytical approaches used to develop the weight data for vehicle system concepts using advanced technology are reported. Weight data are supplied for the following major system elements: engine, pressurization, propellant containers, structural shells and secondary structure, and environmental protection shields for the meteoroid and thermal design requirements. Scaling laws, improved and a simplified set, are developed from the system weight data. The laws consider the implications of the major design parameters and mission requirements on the stage inert mass.

Source record↗

Silica reinforcement and char reactions in the Apollo heat shield.

Reactions of the silica reinforcement fiber and ablation char of the Apollo heat shield have been investigated by laboratory tests in an arc image furnace (at temperature levels up to 5000 R, pressures up to 0.7 atm, and heat flux similar to reentry) and by an actual reentry test. Microchemical analyses and X-ray diffraction studies have been made to determine the presence of SiC formation in the char. Experimental data and analytical predictions of thermal and density profiles have been compared for the ablation of virgin heat shield and precharred materials to determine the effects of SiC formation on ablation performance. In all analyses, general agreement was found between chemical composition and the thermal predictions for laboratory tests and reentry materials. In all ablated materials, SiC was formed in the front surface of the char. The highest SiC content found was 58% by weight and found in a high-pressure environment. The SiC formed was found to act as a heat sink in the ablation process and can lower the front surface temperature by 300 R.

Cagliostro, D. E.↗

High Pressure Reverse Flow APS Engine

A design and test demonstration effort was undertaken to evaluate the concept of the reverse flow engine for the APS engine application. The 1500 lb (6672 N) thrust engine was designed to operate on gaseous hydrogen and gaseous oxygen propellants at a mixture ratio of 4 and to achieve the objective performance of 435 sec (4266 Nsec/kg) specific impulse. Superimposed durability requirements called for a million-cycle capability with 50 hours duration. The program was undertaken as a series of tasks including the initial preliminary design, design of critical test components and finally, the design and demonstration of an altitude engine which could be used interchangeably to examine operating parameters as well as to demonstrate the capability of the concept. The program results are reported with data to indicate that all of the program objectives were met or exceeded within the course of testing on the program. The analysis effort undertaken is also reported in detail and supplemented with test data in some cases where prior definitions could not be made. The results are contained of these analyses as well as the test results conducted throughout the course of the program. Finally, the test data and analytical results were combined to allow recommendations for a flight weight design. This preliminary design effort is also detailed.

Senneff, J. M.↗

A representation of Jacchia's thermospheric models in spherical harmonics

The Jacchia models are represented in terms of spherical harmonic functions. This representation has the advantages of ease of comparison with theoretical and other observational models and data, mathematical analyticity and relative simplicity. The symmetry properties of the models are emphasized by this representation and some physical characteristics like the increase of the amplitude of the diurnal density variation with decreasing solar activity become more apparent.

Blum, P.↗

Advanced beaded and tubular structural panels. Volume 1: Design and analysis

A study was conducted to exploit the efficiency of curved elements in the design of lightweight structural panels under combined loads of axial compression, inplane shear, and bending. Data cover analytical procedures for optimum panel design, static strength analyses, results of panel design studies, and correlation of theory with test results.

Greene, B. E.↗