Search NASA⌕ Search

SEARCH · Search NASA

Results for “data driven model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Adaptively Learned Modeling for a Digital Twin of Hydropower Turbines with Application to a Pilot Testing System

In the development of a digital twin (DT) for hydropower turbines, dynamic modeling of the system (e.g., penstock, turbine, speed control) is crucial, along with all the necessary data interface, virtualization, and dashboard designs. Since the DT must mimic the actual dynamics of the hydropower turbine accurately, adaptive learning is required to train these dynamic models online so that the models in the DT can effectively follow the representation of the actual hydropower turbine dynamics accurately and reliably. This study presents an adaptive learning method for obtaining the hydropower turbine models for DT development of hydropower systems using the recursive least squares algorithm. To simplify the formulation, the hydropower turbine under consideration was assumed to operate near a fixed operating point, where the system dynamics can be well represented by a set of linear differential equations with constant parameters. In this context, the well-known six-coefficient model for the Francis turbine was formulated as the starting point to obtain input and output models for the turbine. Then, an adaptive learning mechanism was developed to learn model parameters using real-time data from a hydropower turbine testing system. This led to semi-physical modeling, in which first principles and data-driven modeling are integrated to produce dynamic models for DT development. Applications to a pilot system at the Norwegian University of Science and Technology (NTNU) were made, and the models learned adaptively using the data collected from the university’s pilot system. Desired modeling and validation results were obtained.

13 HYDRO ENERGY↗

Combined magnetic and kinetic control of advanced tokamak steady state scenarios based on semi-empirical modelling

Our paper shows that semi-empirical data-driven models based on a two-time-scale approximation for the magnetic and kinetic control of advanced tokamak (AT) scenarios can be advantageously identified from simulated rather than real data, and used for control design. The method is applied to the combined control of the safety factor profile, q(x), and normalized pressure parameter, beta(N), using DIII-D parameters and actuators (on-axis co-current neutral beam injection (NBI) power, off-axis co-current NBI power, electron cyclotron current drive power, and ohmic coil). The approximate plasma response model was identified from simulated open-loop data obtained using a rapidly converging plasma transport code, METIS, which includes an MHD equilibrium and current diffusion solver, and combines plasma transport nonlinearity with 0D scaling laws and 1.5D ordinary differential equations. The paper discusses the results of closed-loop METIS simulations, using the near-optimal ARTAEMIS control algorithm (MoreauDet al 2013 Nucl. Fusion 53 063020) for steady stateAT operation. With feedforward plus feedback control, the steady state target q-profile and beta(N) are satisfactorily tracked with a time scale of about 10 s, despite large disturbances applied to the feedforward powers and plasma parameters. We also show the robustness of the control algorithm with respect to disturbances of the H&CD actuators and of plasma parameters such as the H-factor, plasma density and effective charge.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Flow field Reconstruction for Inhomogeneous Turbulence using Data and Physics Driven Models

A methodology combining Large Eddy Simulation (LES) trained data and a physics driven wave packet model to obtain a reduced order reconstruction for broadband, three-dimensional, temporally stationary but spatially inhomogeneous, incompressible turbulence. Wake turbulence generated by an axisymmetric dragging disk with a turbulent co-flow serves as the benchmark test case. We begin by studying the proper-orthogonal decomposition of the turbulent fluctuations taken from a high-resolution LES to first identify whether the fields demonstrate a low-rank character. It is argued that the presence of the turbulent co-flow results in a largely broadband character lacking any tonal properties. This is especially true for Strouhal numbers greater than 1 and only a small fraction of energy is contained in the leading order Kelvin-Helmholtz modes. As such reconstructions and reduced order modeling purely relying on data from LES does not appear to be a lucrative solution - contrary to problems with strongly tonal character. To supplement the missing energy from a low order truncated mode expansion, we utilize a physics based super-resolution (enrichment) algorithm that relies on spatio-temporally localized Gabor wave packets whose time evolution is described using a set of ordinary differential equations. The reconstructed flow has single- and two-point correlations that are consistent with the reference high resolution simulation data.

SLS↗

Numerical modeling of the solar wind flow with observational boundary conditions

In this paper we describe our group efforts to develop a self-consistent, data-drivenmodel of the solar wind (SW) interaction with the local interstellar medium. The motion of plasma in this model is described with the MHD approach, while the transport of neutral atoms is addressed by either kinetic or multi-fluid equations. The model and its implementation in the Multi-Scale Fluid-Kinetic Simulation Suite (MS-FLUKSS) are continuously tested and validated by comparing our results with other models and spacecraft measurements. In particular, it was successfully applied to explain an unusual SW behavior discovered by the Voyager 1 spacecraft, i.e., the development of a substantial negative radial velocity component, flow turning in the transverse direction, while the latitudinal velocity component goes to very small values. We explain recent SW velocity measurements at Voyager 1 in the context of our 3-D, MHD modeling. We also present a comparison of different turbulence models in their ability to reproduce the SW temperature profile from Voyager 2 measurements. The boundary conditions obtained at 50 solar radii from data-driven numerical simulations are used to model a CME event throughout the heliosphere.

79 ASTRONOMY AND ASTROPHYSICS↗

Calibrating hypersonic turbulence flow models with the HIFiRE-1 experiment using data-driven machine-learned models.

In this paper we study the efficacy of combining machine-learning methods with projection-based model reduction techniques for creating data-driven surrogate models of computationally expensive, high-fidelity physics models. Such surrogate models are essential for many-query applications e.g., engineering design optimization and parameter estimation, where it is necessary to invoke the high-fidelity model sequentially, many times. Surrogate models are usually constructed for individual scalar quantities. However there are scenarios where a spatially varying field needs to be modeled as a function of the model’s input parameters. Here we develop a method to do so, using projections to represent spatial variability while a machine-learned model captures the dependence of the model’s response on the inputs. The method is demonstrated on modeling the heat flux and pressure on the surface of the HIFiRE-1 geometry in a Mach 7.16 turbulent flow. The surrogate model is then used to perform Bayesian estimation of freestream conditions and parameters of the SST (Shear Stress Transport) turbulence model embedded in the high-fidelity (Reynolds-Averaged Navier–Stokes) flow simulator, using shock-tunnel data. The paper provides the first-ever Bayesian calibration of a turbulence model for complex hypersonic turbulent flows. We find that the primary issues in estimating the SST model parameters are the limited information content of the heat flux and pressure measurements and the large model-form error encountered in a certain part of the flow.

42 ENGINEERING↗

A multiscale multi-permeability poroplasticity model linked by recursive homogenizations and deep learning

Many geological materials, such as shale, mudstone, carbonate rock, limestone and rock salt are multi-porosity porous media in which pores of different scales may co-exist in the host matrix. When fractures propagate in these multi-porosity materials, these pores may enlarge and coalesce and therefore change the magnitude and the principal directions of the effective permeability tensors. The pore-fluid inside the cracks and the pores of host matrix may interact and exchange fluid mass, but the difference in hydraulic properties of these pores often means that a single homogenized effective permeability tensor field is insufficient to characterize the evolving hydraulic properties of these materials at smaller time scale. Furthermore, the complexity of the hydro-mechanical coupling process and the induced mechanical and hydraulic anisotropy originated from the micro-fracture and plasticity at grain scale also makes it difficult to propose, implement and validate separated macroscopic constitutive laws for numerical simulations. Here this article presents a hybrid data-driven method designed to capture the multiscale hydro-mechanical coupling effect of porous media with pores of various different sizes. At each scale, data-driven models generated from supervised machine learning are hybridized with classical constitutive laws in a directed graph that represents the numerical models. By using sub-scale simulations to generate database to train material models, an offline homogenization procedure is used to replace the up-scaling procedure to generate cohesive laws for localized physical discontinuities at both grain and specimen scales. Through a proper homogenization procedure that preserves spatial length scales, the proposed method enables field-scale simulations to gather insights from meso-scale and grain-scale micro-structural attributes. This method is proven to be much more computationally efficient than the classical DEM–FEM or FEM2 approach while at the same time more robust and flexible than the classical surrogate modeling approach. Due to the usage of bridging-scale technique, the proposed model may provide multiple opportunities to incorporate different types of simulations and experimental data across different length scales for machine learning. Numerical issues will also be discussed.

42 ENGINEERING↗

Bayesian differential programming for robust systems identification under uncertainty

This paper presents a machine learning framework for Bayesian systems identification from noisy, sparse and irregular observations of nonlinear dynamical systems. The proposed method takes advantage of recent developments in differentiable programming to propagate gradient information through ordinary differential equation solvers and perform Bayesian inference with respect to unknown model parameters using Hamiltonian Monte Carlo sampling. This allows an efficient inference of the posterior distributions over plausible models with quantified uncertainty, while the use of sparsity-promoting priors enables the discovery of interpretable and parsimonious representations for the underlying latent dynamics. A series of numerical studies is presented to demonstrate the effectiveness of the proposed methods, including nonlinear oscillators, predator–prey systems and examples from systems biology. Taken together, our findings put forth a flexible and robust workflow for data-driven model discovery under uncertainty. All codes and data accompanying this article are available at https://bit.ly/34FOJMj .

Science & Technology - Other Topics↗

Thermodynamic Consistent Neural Networks for Learning Material Interfacial Mechanics

For multilayer materials in thin substrate systems, interfacial failure is one of the most challenges. The traction-separation relations (TSR) quantitatively describe the mechanical behavior of a material interface undergoing openings, which is critical to understand and predict interfacial failures under complex loadings. However, existing theoretical models have limitations on enough complexity and flexibility to well learn the real-world TSR from experimental observations. A neural network can fit well along with the loading paths but often fails to obey the laws of physics, due to a lack of experimental data and understanding of the hidden physical mechanism. In this paper, we propose a thermodynamic consistent neural network (TCNN) approach to build a data-driven model of the TSR with sparse experimental data. The TCNN leverages recent advances in physics-informed neural networks (PINN) that encode prior physical information into the loss function and efficiently train the neural networks using automatic differentiation. We investigate three thermodynamic consistent principles, i.e., positive energy dissipation, steepest energy dissipation gradient, and energy conservative loading path. All of them are mathematically formulated and embedded into a neural network model with a novel defined loss function. A real-world experiment demonstrates the superior performance of TCNN, and we find that TCNN provides an accurate prediction of the whole TSR surface and significantly reduces the violated prediction against the laws of physics.

Zhang, Jiaxin↗

Can We Practically Bring Physics-based Modeling Into Operational Analytics Tools?

We present that analytics software is increasingly used to improve and maintain operational efficiency in commercial buildings. Energy managers, owners, and operators are using a diversity of commercial offerings often referred to as Energy Information Systems, Fault Detection and Diagnostic (FDD) systems, or more broadly Energy Management and Information Systems, to cost-effectively enable savings on the order of ten to twenty percent. Most of these systems use data from meters and sensors, with rule-based and/or data-driven models to characterize system and building behavior. In contrast, physics-based modeling uses first-principles and engineering models (e.g., efficiency curves) to characterize system and building behavior. Historically, these physics-based approaches have been used in the design phase of the building life cycle or in retrofit analyses. Researchers have begun exploring the benefits of integrating physics-based models with operational data analytics tools, bridging the gap between design and operations. In this paper, we detail the development and operator use of a software tool that uses hybrid data-driven and physics-based approaches to cooling plant FDD and optimization. Specifically, we describe the system architecture, models, and FDD and optimization algorithms; advantages and disadvantages with respect to purely data-driven approaches; and practical implications for scaling and replicating these techniques. Finally, we conclude with an evaluation of the future potential for such tools and future research opportunities.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Accelerating scientific discoveries through data-driven innovations

Developing artificial intelligence (AI) and machine learning (ML) methods that can accelerate scientific discoveries and advance science has become one of the important research directions for the AI/ML research community. It has been gaining increasing attention from researchers in diverse scientific areas, including biomedical science, materials science, climate science, physics, chemistry, and many others. Data-driven AI/ML innovations to enable reliable predictions and optimal decision making for scientific discoveries face several critical challenges, among which are high system complexity, large search space, incomplete knowledge, and small data, all of which demand novel strategies to effectively address them. Meeting these challenges and thereby accelerating scientific discoveries and industrial innovations, calls for research that can take full advantage of the latest advances in AI/ML to integrate data-driven techniques with scientific knowledge and is able to execute them in modern high-performance computing (HPC) environments at scale. This Patterns special collection "Accelerating scientific discoveries through data-driven innovations" features articles that showcase the promising roles of AI/ML and data-driven modeling in accelerating scientific discoveries and may inspire the next wave of data-driven innovations in various scientific domains.

97 MATHEMATICS AND COMPUTING↗

Data-driven predictive probability density function control of fiber length stochastic distribution shaping in refining process

Pulp is the most important raw material in paper in paper industries, whose Fiber Length Stochastic Distribution (FLSD) shaping directly determines the energy consumption and paper quality of the subsequent papermaking processes. However, the mean and variance are insufficient to describe the output FLSD shaping, which display non-Gaussian distribution properties. Therefore, the traditional control, method based on the mean and variance of fiber length is difficult to control the FLSD shaping effectively. In this paper, a novel data-driven predictive probability density function (PDF) control method is proposed for output FLSD shaping in refining process. Primarily, in order to improve the approximation accuracy of the PDF employing RBF neural network, the parameters (center value and width) of each RBF basis functions are tuned via utilizing iterative learning control (ILC) law, and the corresponding estimations of weights law can be obtained. Secondly, considering that the conventional linear model of weights vector has drawbacks of low accuracy and weak generalization ability, random vector functional link networks (RVFLNs) based data driven nonlinear modelling method is employed to characterize the prediction model between the input variables and weights vector. Finally, in order to reduce the randomness of the output FLSD, a minimum entropy control method under mean constraint is employed to design the predictive PDF controller for the output FLSD shaping with the help of the established nonlinear stochastic distribution model. Both simulations and experiments are given to illustrate the effectiveness and practicability of the proposed method.

Probability debsity function, Fiber length distrib↗

Hyperplane decision trees as piecewise linear surrogate models for chemical process design

Recent trends in chemical engineering research point towards an increasing reliance on data-driven modeling approaches. Neural networks, for instance, have proven to be accurate when data is plentiful and high-dimensional, but in many cases, they require computationally-intensive training procedures. Here, in this work, we describe hyperplane decision trees (HT) as a highly expressive and low-compute machine learning model architecture. These models are locally linear and have linear decision boundaries, resulting in a piecewise linear model of the data. This property allows them to be converted into mixed-integer linear constraints which can be globally optimized. Our open-source PyTorch implementation of this method is a fast, flexible, and accessible way to build accurate piecewise linear models of data.

Decision trees↗

A Hybrid Data-Driven and Model-Based Anomaly Detection Scheme for DER Operation

This paper proposes a hybrid data and model-based anomaly detection scheme to secure the operation of distributed energy resources (DERs) in distribution grids. Data-driven autoencoders are set up at the edge device level and they use local DER operational data as inputs. The abnormal statuses are detected by analyzing reconstruction errors. In parallel, modelbased state estimation (SE) is set up at the central level and it uses system-wide models and measurements as data inputs. The anomalies are identified by analyzing measurement residuals. The hybrid scheme preserves the benefits of both data-driven and model-based analyses and thus improves the robustness and the accuracy of anomaly detection. Numerical tests based on the model of a real distribution feeder in Southern California highlight the proposed scheme's effectiveness and benefits.

anomaly detection↗

Carbon-phosphorus cycle models overestimate CO 2 enrichment response in a mature Eucalyptus forest

The importance of phosphorus (P) in regulating ecosystem responses to climate change has fostered P-cycle implementation in land surface models, but their CO 2 effects predictions have not been evaluated against measurements. Here, we perform a data-driven model evaluation where simulations of eight widely used P-enabled models were confronted with observations from a long-term free-air CO 2 enrichment experiment in a mature, P-limited Eucalyptus forest. We show that most models predicted the correct sign and magnitude of the CO 2 effect on ecosystem carbon (C) sequestration, but they generally overestimated the effects on plant C uptake and growth. We identify leaf-to-canopy scaling of photosynthesis, plant tissue stoichiometry, plant belowground C allocation, and the subsequent consequences for plant-microbial interaction as key areas in which models of ecosystem C-P interaction can be improved. Together, this data-model intercomparison reveals data-driven insights into the performance and functionality of P-enabled models and adds to the existing evidence that the global CO 2 -driven carbon sink is overestimated by models.

54 ENVIRONMENTAL SCIENCES↗

Load Modeling with Smart Meter Data for Advanced Volt-VAR Optimization Applications

This paper demonstrates the creation of time-varying, end-use electric load models with electric meter data for use by advanced, model-based volt-VAR optimization (VVO) control schemes. VVO has been shown to reduce energy consumption and peak demand in the electric distribution system. Modern VVO systems use power flow models to make control decisions. In order to make optimal decisions, these models must contain accurate load models. To improve these load models, this work uses active power, reactive power, and voltage magnitude measurements from advanced metering infrastructure (AMI) in a simulated distribution feeder to create electric load models for each customer meter. Three different modeling approaches are discussed, and their effectiveness is measured by comparing the optimality of VVO solutions with a base case. The results show that the models derived from AMI data can accurately represent some end-use load behavior like total energy costs, but lose accuracy when considering more dynamic system behavior like voltage violations over small time intervals. This work helps to advance state-of-the-art, model-based VVO by providing a data-driven modeling technique which acknowledges that optimal distribution system control requires a treatment of the system which is dependent on time, voltage, and system conditions.

Thayer, Brandon L.↗

Long-term leaf C:N ratio change under elevated CO 2 and nitrogen deposition in China: Evidence from observations and process-based modeling

Climate change, elevating atmosphere CO 2 (eCO 2 ) and increased nitrogen deposition (iNDEP) are altering the biogeochemical interactions between plants, microbes and soils, which further modify plant leaf carbon-nitrogen (C:N) stoichiometry and their carbon assimilation capability. Many field experiments have observed large sensitivity of leaf C:N ratio to eCO 2 and iNDEP. However, the large-scale pattern of this sensitivity is still unclear, because eCO 2 and iNDEP drive leaf C:N ratio toward opposite directions, which are further compounded by the complex processes of nitrogen acquisition and plant-and-microbial nitrogen competition. Here, we attempt to map the leaf C:N ratio spatial variation in the past 5 decades in China with a combination of data-driven model and process-based modeling. These two approaches showed consistent results. Over different regions, we found that leaf C:N ratio had significant but uneven changes between 2 time periods (1960-1989 and 1990-2015): a 5% ± 8% increase for temperate grasslands in northern China, a 3% ± 6% increase for boreal grasslands in western China, and by contrast, a 7% ± 6% decrease for temperate forests in southern China, and a 3% ± 5% decrease for boreal forests in northeastern China. Additionally, the structural equation models indicated that the leaf C:N change was sensitive to ΔNDEP, ΔCO 2 and ΔMAT rather than ΔMAP and ecosystem types. In this work, process-based modeling suggested that iNDEP was the main source of soil mineral nitrogen change, dominating leaf C:N ratio change in most areas in China, while eCO 2 led to leaf C:N ratio increase in low iNDEP area. This study also indicates that the long-term leaf C:N ratio acclimation was dominated by climate constraint, especially temperature, but was constrained by soil N availability over decade scale.

54 ENVIRONMENTAL SCIENCES↗

Structured Neural Network Modeling for Developing Digital Twins Models of Hydropower Generation Units

Dynamic modeling is a key part in the development of digital twin (DT) for dynamic systems. This is true for hydropower systems, where whole system modeling including penstock, turbine and generators, etc is important in realizing actuate modeling for the real systems. On the other hand, in response to the large variations of the power demand due to increased penetration of renewables such as wind and solar, hydropower systems are now required to operate in a large power generation range. This situation triggers the nonlinear characteristics of the generation unit with respect to its models. As such, it is imperative to use data driven modeling such as neural networks to learn the nonlinear dynamics of the hydropower generation unit. To achieve this objective, this study constructs a modeling and learning algorithm integrated with multiple structured neural network models for the modeling of turbine shaft speed, penstock pressure, and generator power output based on the generator power control setpoint, field current, and field voltage. In addition, the study uses the hydropower data from Tacoma Public Utilities to train and validate the proposed neural network algorithm. The results have shown that this structured neural network modeling approach can learn the system dynamics effectively by using the real-time data collected from the hydropower system with the desired modeling results.

Wang, Hong↗

Learning Implicit Models of Complex Dynamical Systems From Partial Observations [Slides]

Conclusions: certain data-driven models do implicitly what physics simulations do explicitly; theoretical underpinnings in Koopman theory, delay-coordinate embeddings, and Mori-Zwanzig formalism; best approach for given system with finite data an open question; physics-informed machine learning (PIML) emerging framework for combining explicit and implicit modeling.

97 MATHEMATICS AND COMPUTING↗