Search NASA⌕ Search

SEARCH · Search NASA

Results for “data modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

The interior structure of Jupiter (consequences of Pioneer 10 data)

Models of the Jovian interiors are based on theoretical equations of state of hydrogen and helium supported by a few experimental points and an observed parameter such as oblateness, gravitational coefficients, heat emission, and magnetic fields. The models fall into three categories: (1) those which assume a uniform and rather low H2/He ratio throughout the planet, (2) those in which this ratio is solar and thus higher and (3) those which take into account the lack of complete miscibility of the two elements in the condensed state. Recent values of the observed parameters obtained by Pioneer 10 permit improvements of the first two models but also pose new questions. In the first category of models the new data indicate that the amount of hydrogen has to be increased, while in the solar models which have a heavy core (made of SiO2, MgO, Fe and Ni), the abundance of hydrogen has to be decreased, both changes pointing in the direction of incomplete miscibility present in the third category of models.

Smoluchowski, R.↗
DOE OSTI2019

Integrating physics-based models with sensor data: An inverse modeling approach

Physics-based building energy models (e.g., EnergyPlus) rely on some unknown input parameters (e.g., zone air infiltration) that are hard to measure, leading to uncertainty in simulation results especially for existing buildings with varying operating conditions. With the increasing deployment of smart thermostats, zone air temperature data are readily available, posing a new opportunity for building energy modeling if such data can be harnessed. This study presents a novel inverse modeling approach which inverses the zone air heat balance equation and uses the measured zone air temperature to analytically calculate the zone air infiltration rate and zone internal thermal mass (e.g., furniture, interior partitions), which are two important model parameters with great variability and difficult to measure. This paper introduces the technical concept and algorithms of the inverse models, their implementation in EnergyPlus, and verification using EnergyPlus simulated building performance data. The inverse modeling approach provides new opportunities for integrating data from massive IoT sensors and devices to enhance the accuracy of simulation results which are used to inform decision making on energy retrofits and efficiency improvements of existing buildings.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
NASA NTRS2022

Comparison of U.S. and Russian Slow Crack Growth Data and Models

Both the US and Russian space programs use similar predictive models for design of fused silica windows on the International space station. The Russian model can be derived from the power expression for slow crack growth (SCG) or “static fatigue.” The US uses both power and exponential models. Despite the similarity of models and data fitting approach (linear regression and right censoring), different SCG parameters have been derived by US and Russian parties for the same material (Russian fused silica) tested in a similar manner. The difference appears to be related to the use of short-term strength data along with the longer-term static fatigue data, with the power law parameter n being very sensitive to the conversion of strength data into equivalent static data. This hybrid approach is feasible if strength data is measured with a constant stress rate and is appropriately converted to a static equivalent. More research into the approach is needed. However, because of the nonlinear behavior of fused silica in log(v) – log(K(I) ) space and the sensitivity of parameter estimation to fit range, the exponential model is a better choice regardless of test method. Functions are given to convert parameters from the Russian model to those in the US model. However, accurate conversion is hampered by the lack of inert strength data. When the same test technique is used, US and Russian materials exhibit very similar parameters.

Silica, strength, impact, crack growth, windows, I↗
NASA NTRS2020

The Role of Declining Snow Cover in the Desiccation of the Great Salt Lake, Utah, using MODIS Data

The Great Salt Lake (GSL) in Utah has been shrinking since the middle of the 19th Century, leading to decreased area and volume, and increased salinity. We use satellite data products from the Terra and Aqua MODerate-resolution Imaging Spectroradiometer (MODIS) and the Landsat-7 and -8 satellites, along with meteorological and streamflow data, and modeled data products to study the relationship between changing snow-cover conditions and the decline of the GSL since 2000 in the context of the historical record of lake levels. The GSL basin includes much of the snow-dominated Wasatch and Uinta mountain ranges to the east of the lake. Snowmelt feeds the Bear, Jordan, and Weber rivers which are the three main rivers that flow into the lake. Snowmelt-timing maps, derived from a new MODIS standard snow-cover product, MOD10A1F, show that snow melted ~9.5 days earlier in the GSL basin during the study period, extending from 2000 – 2018. Air temperatures derived from 26 meteorological stations and surface temperatures measured by the Aqua MODIS land-surface temperature (LST) products, MYD21A1D and MYD21A1N, show trends of increasing temperature of ~0.94°C (a=0.05), and ~2.18°C, respectively, with most of the LST trends in the GSL basin being statistically significant (a=0.05). Increasing air temperatures in the basin have led to less precipitation falling as snow, lower snow depth (by ~34.5 mm (=0.01)) and snow-water equivalent (0.02 mm (a=0.01)), and earlier snowmelt. Also during the study period, Global Land surface Evaporation Amsterdam Model data show evaporation increasing by ~3.2 mm/yr, with trends in much of the basin being statistically significant (a=0.05). Trends calculated from the various products are generally in agreement indicating higher temperatures, greater evaporation, less snowfall and snow-on-the ground, and earlier snowmelt. Earlier snowmelt contributes to increasing evaporative loss from water flowing toward the lake. Furthermore, a lower mountain snowpack and less precipitation falling as snow (versus rain) is associated with lower stream discharge even if overall precipitation stays the same. The surface-water temperature of the GSL also increased over the study period by ~ 0.69°C, according to the MODIS LST data products, and the surface-water elevation of the lake dropped by ~1.7 m between 2000 and 2018 based on United States Geological Survey measurements, and the areal extent of the lake decreased by ~901 km2 as measured using Landsat imagery. Desiccation of the lake is associated with deleterious effects on wildlife, recreational activities, and some local industries. And, importantly, an expanding lake bed can also fuel dust storms that promote dangerous air quality along the Wasatch Front. This work elucidates the key role that satellite remote sensing can play in documenting earlier snowmelt and other changes in the GSL basin that influence the ongoing decline of the Great Salt Lake.

Dorothy K Hall↗
DOE OSTI2024

The Data Mine model for accessible partnerships in data science

Abstract The Data Mine at Purdue University is a pioneering experiential learning community for undergraduate and graduate students of any background to learn data science. The first data‐intensive experience embedded in a large learning community, The Data Mine had nearly 1300 students in academic year (AY) 2022–2023 and nearly 1700 students for AY 2023–2024. The Data Mine embodies data‐infused education, research, and collaboration. Students learn Python, R, SQL, and shell‐scripting, while working on weekly projects within a high‐performance computing (HPC) cluster. In the Corporate Partners cohort, students work on teams of 5–15 students, led by a paid student team leader. Each cohort follows an Agile approach, working on data‐intensive projects provided by industry partners and mentored by company employees. Students develop professional and data skills throughout the academic year, from August through April. Many students return in subsequent years to the program, increasing their tenure with a Corporate Partner. Student teams are inherently interdisciplinary; students from 133 different majors are involved in the program, ranging from new incoming students through PhD level students. These interdisciplinary teams of students bring new perspectives to challenging problems in which data science is a key part of the solution. The interdisciplinary teams foster an environment of synthesis with ideas and solutions. Students come together with different life experiences, different levels of technical skill, but also varying ways they navigate paths to solutions because of the variety of majors represented, resulting in a more creative and robust solution than a traditional data science program. This article is categorized under: Applications of Computational Statistics > Education in Computational Statistics

Betz, Margaret A.↗
DOE OSTI2023

Plant-specific Model and Data Analysis using Dynamic Security Modeling and Simulation

The requirements for U.S. nuclear power plants to maintain a large on-site physical security force contribute to their high operational costs. The cost of maintaining the current physical security posture is approximately 10% of the overall operation and maintenance budget for commercial nuclear power plants. The goal of the Light Water Reactor Sustainability (LWRS) program’s physical security pathway is to develop tools, methods, and technologies and provide the technical basis for an optimized physical security posture. The conservatisms built into current security postures may be analyzed and minimized in order to reduce security costs while still ensuring adequate security and operational safety. The research performed at Idaho National Laboratory within LWRS program’s physical security pathway has successfully developed a dynamic force-on-force modeling framework using various computer simulation tools and integrating them with the dynamic assessment Event Modeling Risk Assessment using Linked Diagrams (EMRALD) tool. This document provides an update on the progress in applying a dynamic computational framework that links results from a commercially available force-on-force simulation tool, a commercially available thermal-hydraulic tool, and EMRALD to an operating commercial nuclear power plant. This report is only a summary of the progress and does not contain specific modeling results as those contain sensitive security information. This process of including plant procedures and multiple analysis results is being called Modeling and Analysis for Safety Security using Dynamic EMRALD Framework or MASS-DEF. Previous reports described how a user could integrate their plant-specific force-on-force models with the dynamic simulation tool EMRALD, model operator actions, integrate with probabilistic risk assessment tools, such as CAFTA (Computer Aided Fault Tree Analysis System) or SAPHIRE (Systems Analysis Programs for Hands-on Integrated Reliability Evaluations), and with thermal-hydraulic tools, such as RELAP-5. Previous reports applied various combinations of available simulations codes with EMRALD using generic plant models to demonstrate how to perform the analysis. This report documents the results of applying the dynamic computational framework to an actual nuclear facility using their security scenarios and timelines. This report does not contain any plant's sensitive information and/or Safeguards Information. The purpose of this study was to verify that results achieved using generic models are similar to actual plant results and to refine our guidance on the use of the framework. This assessment enables further analysis, such as what-if scenarios and staff-reduction evaluation, thereby optimizing physical security at plants.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

Improving Text Classification with Large Language Model-Based Data Augmentation

Large Language Models (LLMs) such as ChatGPT possess advanced capabilities in understanding and generating text. These capabilities enable ChatGPT to create text based on specific instructions, which can serve as augmented data for text classification tasks. Previous studies have approached data augmentation (DA) by either rewriting the existing dataset with ChatGPT or generating entirely new data from scratch. However, it is unclear which method is better without comparing their effectiveness. This study investigates the application of both methods to two datasets: a general-topic dataset (Reuters news data) and a domain-specific dataset (Mitigation dataset). Our findings indicate that: 1. ChatGPT generated new data consistently enhanced model’s classification results for both datasets. 2. Generating new data generally outperforms rewriting existing data, though crafting the prompts carefully is crucial to extract the most valuable information from ChatGPT, particularly for domain-specific data. 3. The augmentation data size affects the effectiveness of DA; however, we observed a plateau after incorporating 10 samples. 4. Combining the rewritten sample with new generated sample can potentially further improve the model’s performance.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Transfer-Learnt Energy Models for Predicting Electricity Consumption in Buildings with Limited and Sparse Field Data

Modeling energy consumption is critical for energy-efficient utilization of the electric appliances in a building, smart grid programs (like demand-response), and many other smart home applications. State-of-the-art energy modeling techniques either rely on theoretical models, or extensive instrumentation of the building envelope to gather ``big" data to train a deep neural network. While theoretical models are often limited by their estimation accuracy, it is not always feasible to gather a significant amount of field data. In this paper, we explore transfer learning-based strategies to train much more accurate model for energy estimation when using a sparse field data. We transferred knowledge, in the form of data and parameters, from the simulation framework to the field data. We evaluated the efficacy of our approach on field data collected from six commercial buildings and our results indicate that transfer learning-based models trained over one month data can perform comparative (and in some cases better) than the state-of-the-art machine learning and deep learning solutions.

Jain, Milan↗
DOE OSTI2015

Rethinking the Default Construction of Multimodel Climate Ensembles

Here, we discuss the current code of practice in the climate sciences to routinely create climate model ensembles as ensembles of opportunity from the newest phase of the Coupled Model Intercomparison Project (CMIP). We give a two-step argument to rethink this process. First, the differences between generations of ensembles corresponding to different CMIP phases in key climate quantities are not large enough to warrant an automatic separation into generational ensembles for CMIP3 and CMIP5. Second, we suggest that climate model ensembles cannot continue to be mere ensembles of opportunity but should always be based on a transparent scientific decision process. If ensembles can be constrained by observation, then they should be constructed as target ensembles that are specifically tailored to a physical question. If model ensembles cannot be constrained by observation, then they should be constructed as cross-generational ensembles, including all available model data to enhance structural model diversity and to better sample the underlying uncertainties. To facilitate this, CMIP should guide the necessarily ongoing process of updating experimental protocols for the evaluation and documentation of coupled models. Finally, with an emphasis on easy access to model data and facilitating the filtering of climate model data across all CMIP generations and experiments, our community could return to the underlying idea of using model data ensembles to improve uncertainty quantification, evaluation, and cross-institutional exchange.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2014

Current Trends in the Detection of Sociocultural Signatures: Data-Driven Models

The harvesting of behavioral data and their analysis through evidence-based reasoning enable the detection of sociocultural signatures in their context to support situation awareness and decision making. Harvested data are used as training materials from which to infer computational models of sociocultural behaviors or calibrate parameters for such models. Harvested data also serve as evidence input that the models use to provide insights about observed and future behaviors for targets of interest. The harvested data is often the result of assembling diverse data types and aggregating them into a form suitable for analysis. Data need to be analyzed to bring out the categories of content that are relevant to the domain being addressed in order to train or run a model. If, for example, we are modeling the intent of a group to engage in violent behavior using messages that the group has broadcasted, then these messages need to be processed to extract and measure indicators of violent intent. The extracted indicators and the associated measurements (e.g. rates or counts of occurrence) can then be used to train/calibrate and run computational models that assess the propensity for violence expressed in the source message. Ubiquitous access to the Internet, mobile telephony and technologies such as digital photography and digital video have enabled social media application platforms such as Facebook, YouTube, and Twitter that are altering the nature of human social interaction. The fast increasing pace of online social interaction introduces new challenges and opportunities for gathering sociocultural data. Challenges include the development of harvesting and processing techniques tailored to new data environments and formats (e.g. Twitter, Facebook), the integration of social media content with traditional media content, and the protection of personal privacy. As these and other challenges are addressed, a new wealth of behavioral data and data analysis methods becomes available that are shaping social computing as a strongly data-driven experimental discipline with an increasingly stronger impact on the decision-making process of groups and individuals alike. In this chapter, we review current advances and trends in the detection of sociocultural signatures. Specific embodiments of the issues discussed are provided with respect to the assessment of violent intent and sociopolitical contention. We begin by reviewing current approaches to the detection of sociocultural signatures in these domains. Next, we turn to the review of novel data harvesting methods for social media content. Finally, we discuss the application of sociocultural models to social media content, and conclude by commenting on current challenges and future developments.

Sanfilippo, Antonio P.↗
DOE OSTI2012

A data-driven model of a modal gated ion channel: The inositol 1,4,5-trisphosphate receptor in insect Sf9 cells

The inositol 1,4,5-trisphosphate (IP 3 ) receptor (IP 3 R) channel is crucial for the generation and modulation of intracellular Ca 2+ signals in animal cells. To gain insight into the complicated ligand regulation of this ubiquitous channel, we constructed a simple quantitative continuous-time Markov-chain model from the data. Our model accounts for most experimentally observed gating behaviors of single native IP 3 R channels from insect Sf9 cells. Ligand (Ca 2+ and IP 3 ) dependencies of channel activity established six main ligand-bound channel complexes, where a complex consists of one or more states with the same ligand stoichiometry and open or closed conformation. Channel gating in three distinct modes added one complex and indicated that three complexes gate in multiple modes. This also restricted the connectivity between channel complexes. Finally, latencies of channel responses to abrupt ligand concentration changes defined a model with specific network topology between 9 closed and 3 open states. The model with 28 parameters can closely reproduce the equilibrium gating statistics for all three gating modes over a broad range of ligand concentrations. It also captures the major features of channel response latency distributions. The model can generate falsifiable predictions of IP 3 R channel gating behaviors and provide insights to both guide future experiment development and improve IP 3 R channel gating analysis. Maximum likelihood estimates of the model parameters and of the parameters in the De Young–Keizer model yield strong statistical evidence in favor of our model. Our method is simple and easily applicable to the dynamics of other ion channels and molecules.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Convergence in simulating global soil organic carbon by structurally different models after data assimilation

Abstract Current biogeochemical models produce carbon–climate feedback projections with large uncertainties, often attributed to their structural differences when simulating soil organic carbon (SOC) dynamics worldwide. However, choices of model parameter values that quantify the strength and represent properties of different soil carbon cycle processes could also contribute to model simulation uncertainties. Here, we demonstrate the critical role of using common observational data in reducing model uncertainty in estimates of global SOC storage. Two structurally different models featuring distinctive carbon pools, decomposition kinetics, and carbon transfer pathways simulate opposite global SOC distributions with their customary parameter values yet converge to similar results after being informed by the same global SOC database using a data assimilation approach. The converged spatial SOC simulations result from similar simulations in key model components such as carbon transfer efficiency, baseline decomposition rate, and environmental effects on carbon fluxes by these two models after data assimilation. Moreover, data assimilation results suggest equally effective simulations of SOC using models following either first‐order or Michaelis–Menten kinetics at the global scale. Nevertheless, a wider range of data with high‐quality control and assurance are needed to further constrain SOC dynamics simulations and reduce unconstrained parameters. New sets of data, such as microbial genomics‐function relationships, may also suggest novel structures to account for in future model development. Overall, our results highlight the importance of observational data in informing model development and constraining model predictions.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1999

Adaptive Error Estimation in Linearized Ocean General Circulation Models

Data assimilation methods are routinely used in oceanography. The statistics of the model and measurement errors need to be specified a priori. This study addresses the problem of estimating model and measurement error statistics from observations. We start by testing innovation based methods of adaptive error estimation with low-dimensional models in the North Pacific (5-60 deg N, 132-252 deg E) to TOPEX/POSEIDON (TIP) sea level anomaly data, acoustic tomography data from the ATOC project, and the MIT General Circulation Model (GCM). A reduced state linear model that describes large scale internal (baroclinic) error dynamics is used. The methods are shown to be sensitive to the initial guess for the error statistics and the type of observations. A new off-line approach is developed, the covariance matching approach (CMA), where covariance matrices of model-data residuals are "matched" to their theoretical expectations using familiar least squares methods. This method uses observations directly instead of the innovations sequence and is shown to be related to the MT method and the method of Fu et al. (1993). Twin experiments using the same linearized MIT GCM suggest that altimetric data are ill-suited to the estimation of internal GCM errors, but that such estimates can in theory be obtained using acoustic data. The CMA is then applied to T/P sea level anomaly data and a linearization of a global GFDL GCM which uses two vertical modes. We show that the CMA method can be used with a global model and a global data set, and that the estimates of the error statistics are robust. We show that the fraction of the GCM-T/P residual variance explained by the model error is larger than that derived in Fukumori et al.(1999) with the method of Fu et al.(1993). Most of the model error is explained by the barotropic mode. However, we find that impact of the change in the error statistics on the data assimilation estimates is very small. This is explained by the large representation error, i.e. the dominance of the mesoscale eddies in the T/P signal, which are not part of the 21 by 1" GCM. Therefore, the impact of the observations on the assimilation is very small even after the adjustment of the error statistics. This work demonstrates that simult&neous estimation of the model and measurement error statistics for data assimilation with global ocean data sets and linearized GCMs is possible. However, the error covariance estimation problem is in general highly underdetermined, much more so than the state estimation problem. In other words there exist a very large number of statistical models that can be made consistent with the available data. Therefore, methods for obtaining quantitative error estimates, powerful though they may be, cannot replace physical insight. Used in the right context, as a tool for guiding the choice of a small number of model error parameters, covariance matching can be a useful addition to the repertory of tools available to oceanographers.

Chechelnitsky, Michael Y.↗
DOE OSTI2013

Reservoir Modeling by Data Integration via Intermediate Spaces and Artificial Intelligence Tools in MPS Simulation Frameworks

Conditioning stochastic simulations are very important in many geostatistical applications that call for the introduction of nonlinear and multiple-point data in reservoir modeling. Here, a new methodology is proposed for the incorporation of different data types into multiple-point statistics (MPS) simulation frameworks. Unlike the previous techniques that call for an approximate forward model (filter) for integration of secondary data into geologically constructed models, the proposed approach develops an intermediate space where all the primary and secondary data are easily mapped onto. Definition of the intermediate space, as may be achieved via application of artificial intelligence tools like neural networks and fuzzy inference systems, eliminates the need for using filters as in previous techniques. The applicability of the proposed approach in conditioning MPS simulations to static and geologic data is verified by modeling a real example of discrete fracture networks using conventional well-log data. The training patterns are well reproduced in the realizations, while the model is also consistent with the map of secondary data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2019

Data-Driven Model Validation Across Dimensions

Data-driven model validation across dimensions in mathematical and computational biology assumptions are often made (e.g., symmetry) to reduce the problem from three spatial dimensions (3D) to two (2D). However, some experimental datasets, such as cell counts obtained via flow cytometry, represent the entire 3D biological object. For purpose of model calibration and validation, it is sometimes necessary to compare these biological datasets with model outputs. In this work, we propose a methodology for scaling 2D model outputs to compare with 3D experimental datasets, and we discuss the application of this methodology to two examples: agent-based models of granuloma formation and skeletal muscle tissue. The accuracy of the method is evaluated in artificially generated scenarios.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1998

Variations in Atmospheric Water Vapor as Seen in Satellite Data and Model Reanalysis Fields

New data sets used to describe components of the hydrologic and energy cycles of the Earth system are currently being produced and disseminated through the NASA EOS DAACs and several data assimilation centers supported by such organizations as NASA and NOAA. These data sets incorporate hybrid data analysis schemes and portray satellite and radiosonde data combined in a diagnostic sense and in a forecast mode. There is a need to develop a better understanding of the accuracy and utility of these global, relatively long-term, datasets to describe components of the hydrologic cycle and to understand atmospheric moisture variability and its relation to climatological significant events Much progress has been made in the last ten years in the development of global atmospheric models and analysis of satellite data for global studies. The atmospheric models have improved in their ability to predict both short term and longer term weather events. This has been possible through better understanding of atmosphere dynamics and very rapid advances in computer technology. Over the same period, data assimilation methods have advanced and unconventional data sources such as aircraft and satellite data, drifting buoys, etc., can be assimilated at non-synaptic times. As a result of these improvements, comprehensive global atmospheric fields based on four-dimensional data assimilation methods now provide one of the most reliable methods for studying dynamical and physical behavior in the atmosphere.

Jedlovec, Gary J.↗