Search NASA⌕ Search

SEARCH · Search NASA

Results for “diffusion medium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Seismic energy transmission in an intensively scattering environment

In order to account for some special features of lunar seismograms, namely, the gradual build-up of the signal, the extremely prolonged tail, and the lack of apparent coherence among three orthogonal components of ground motion, a statistical approach is proposed for describing transmission of seismic energy through a medium in which strong scattering takes place. A seismic diffusion theory is presented for a medium with randomly distributed scatterers of a given size distribution. A solution of the resulting diffusion equation for an impulsive energy source gives a curve which fairly closely reproduces the envelope of typical lunar impact seismograms. Since the model is based on constant diffusivity, long-range transmission will require a combination of diffusion and wave propagation treatments for accurate description.

Nakamura, Y.↗

Cosmic far-ultraviolet background radiation - Probe of a dense hot intergalactic medium

Line and continuum radiation fluxes have been computed for a wide range of enriched intergalactic medium (IGM) models. Observations of the diffuse extragalactic light at optical and far-ultraviolet wavelengths are found to provide a potentially important probe of a dense hot intergalactic medium. If the diffuse X-ray background is produced by this gas, the models constrain the cosmological density parameter (Omega) to be less than 0.4. The associated Compton distortions of the cosmic blackbody background radiation and the optical depths to distant quasars at X-ray wavelengths are also evaluated.

Sherman, R. D.↗

The Diffuse EUV and X-Ray Background as a Probe of the Interstellar Medium

We have used the Deep Survey telescope of the Extreme Ultraviolet Explorer to investigate shadows in the diffuse EUV/soft X-ray background that are cast by clouds in the interstellar medium. We confirm the existence of a shadow previously reported and provide evidence for two new shadows. We used IRAS data to identify the clouds producing these shadows and to determine their optical depth to EUV radiation. The EUV-absorbing clouds are optically thick in the EUV, and all EUV emission detected in the direction of these shadows must be produced from material in front of the clouds. We obtained new optical data to determine the distance to these clouds. We use a new differential cloud technique to obtain the pressure of the interstellar medium. These results do not depend on any zero-level calibration of the data. Our results provide evidence that the pressure of the hot interstellar gas is the same in three different directions in the local interstellar medium and is at least 8 times higher than that derived for the Local Cloud surrounding our Sun. This provides new evidence for large thermal pressure imbalances in the local ISM and directly contradicts the basic assumption of thermal pressure equilibrium used in almost all present models of the interstellar medium.

Lieu, Richard↗

The propagation of solar flare particles in a turbulent coronal loop

Energetic solar flare particles, both electrons and protons, must survive the turbulent environment of a flaring loop and propogate to the lower corona or chromosphere in order to produce hard X-ray and gamma ray bursts. This plasma turbulence, often observed in soft X-ray line widths to be in excess of 100 km/s, is presumably capable of efficiently scattering the fast flare particles. This prevents to some degree the free streaming of accelerated particles and depending on the amplitude of the turbulence, restricts the particles to diffusive propagation along the length of the loop to the target chromosphere. In addition this turbulence is capable of performing additional acceleration of the fast particles by the second order Fermi mechanism. For compact flares with rise times 10s, the acceleration effect is small and the propagation of the particles is governed by spatial diffusion and energy loss in the ambient medium. The solution of the time dependent diffusion equation with velocity dependent diffusion and energy loss coefficients yields for the case of nonrelativistic protons particle precipitation rates which are necessary for calculating thick target gamma ray emission and also yields the total thin target emissivity.

Ryan, J. M.↗

Far ultraviolet spectral measurements of the diffuse astronomical background

Diffuse astrophysical emission at wavelengths between 900 and 1200 A (FUV(sub 900-1200 A)) contains unique information about the nature and extent of the poorly understood hot phase of the interstellar medium. Observations of the diffuse background emission in this bandpass are fraught with difficulty, and previous measurements have provided only upper limits to this flux. The data discussed in this paper were obtained with the Far Ultraviolet Coronal Rocket (FU-VCR), which had important advantages over previous instruments: intense geocoronal emission was rejected, eliminating potentially overwhelming contamination of the data; the data were spectroscopic with resolution sufficient for robust modeling of both astrophysical and instrumental data components; and point sources were imaged, allowing for the elimination of these critical contamination sources. The superior quality of these data permits the determination of new bounds to the physical properties of the hot interstellar medium.

Edelstein, J.↗

Diffuse Gamma Rays Galactic and Extragalactic Diffuse Emission

Diffuse gamma rays consist of several components: truly diffuse emission from the interstellar medium, the extragalactic background, whose origin is not firmly established yet, and the contribution from unresolved and faint Galactic point sources. One approach to unravel these components is to study the diffuse emission from the interstellar medium, which traces the interactions of high energy particles with interstellar gas and radiation fields. Because of its origin such emission is potentially able to reveal much about the sources and propagation of cosmic rays. The extragalactic background, if reliably determined, can be used in cosmological and blazar studies. Studying the derived average spectrum of faint Galactic sources may be able to give a clue to the nature of the emitting objects.

Moskalenko, Igor V.↗

Phase field-volumetric lattice Boltzmann model of ion uptake in porous nuclear waste form materials under continuous flow

The flow field within the mesopores of sorbent particles plays a crucial role in radionuclide diffusion and ion uptake kinetics, thus, impacting the overall performance of porous nuclear waste form materials. To fundamentally understand the influence of microstructures and material properties on the radionuclide absorption and retention processes requires a coupled multi-physics model that considers the advection and diffusion within the flow field, the reaction at liquid-solid interfaces, and finally, the solid-state diffusion within a complex nanoporous medium. Here, this study employs the volumetric lattice Boltzmann method (VLBM) to accurately and efficiently calculate the steady state velocity field inside the mesopores of sorbent particles. The obtained velocity field is then utilized to calculate the advection of ions in the steady flow. A phase field (PF) model of ion uptake is used to describe the reaction occurring at the solid-liquid interface and diffusion inside the porous medium. The integrated PF-VLBM model is verified in terms of the mass conservation and numerical efficiency and validated qualitatively with experimental observation data. Then, it is applied to study the influence of thermodynamic and kinetic properties, as well as flow field conditions on the ion uptake kinetics. The numerical results demonstrate that the ion uptake kinetics in porous particles has three distinct stages, which is in agreement with the observations in continuous flow experiments. In the first stage, the kinetics is predominantly controlled by the flow field and ion diffusivity in the liquid phase. The kinetics in the second stage is primarily governed by ion diffusivity in the solid phase. In the third stage the system reaches a dynamic equilibrium with a net zero uptake flux at the interface. It is also found that porous structures significantly affect the efficiency and capacity of ion uptake. The simulation results can help to understand the physics behind the observed ion uptake kinetics in experiments and to facilitate the development of constitutive equations that can account for heterogeneous microstructures in engineering performance codes.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

The microphysics and macrophysics of cosmic rays

This review paper commemorates a century of cosmic ray research, with emphasis on the plasma physics aspects. Cosmic rays comprise only ∼10{sup −9} of interstellar particles by number, but collectively their energy density is about equal to that of the thermal particles. They are confined by the Galactic magnetic field and well scattered by small scale magnetic fluctuations, which couple them to the local rest frame of the thermal fluid. Scattering isotropizes the cosmic rays and allows them to exchange momentum and energy with the background medium. I will review a theory for how the fluctuations which scatter the cosmic rays can be generated by the cosmic rays themselves through a microinstability excited by their streaming. A quasilinear treatment of the cosmic ray–wave interaction then leads to a fluid model of cosmic rays with both advection and diffusion by the background medium and momentum and energy deposition by the cosmic rays. This fluid model admits cosmic ray modified shocks, large scale cosmic ray driven instabilities, cosmic ray heating of the thermal gas, and cosmic ray driven galactic winds. If the fluctuations were extrinsic turbulence driven by some other mechanism, the cosmic ray background coupling would be entirely different. Which picture holds depends largely on the nature of turbulence in the background medium.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The soft X-ray diffuse background and the structure of the local interstellar medium

Data from five rocket flights of the Wisconsin soft X-ray sky survey, covering the southern galactic hemisphere with 6.5 deg spatial resolution between 0.1 and 2.0 keV, are presented as intensity maps. Analysis of the data in two energy bands below 0.3 keV is presented here. These low-energy X-rays appear to be emitted from a plasma of about one-million K, the bulk of which is closer to the sun than even the nearest 5 x 10 to the 19th/sq cm of neutral gas. No evidence is found for the presence of nearby small (radius of about 0.6 pc) clouds of cool neutral gas, as has been proposed by McKee and Ostriker (1977). The X-ray measurements are consistent with the small amounts of local neutral material inferred from Lyman-alpha absorption measurements.

Fried, P. M.↗

Pulsed-field-gradient measurements of time-dependent gas diffusion

Pulsed-field-gradient NMR techniques are demonstrated for measurements of time-dependent gas diffusion. The standard PGSE technique and variants, applied to a free gas mixture of thermally polarized xenon and O2, are found to provide a reproducible measure of the xenon diffusion coefficient (5.71 x 10(-6) m2 s-1 for 1 atm of pure xenon), in excellent agreement with previous, non-NMR measurements. The utility of pulsed-field-gradient NMR techniques is demonstrated by the first measurement of time-dependent (i.e., restricted) gas diffusion inside a porous medium (a random pack of glass beads), with results that agree well with theory. Two modified NMR pulse sequences derived from the PGSE technique (named the Pulsed Gradient Echo, or PGE, and the Pulsed Gradient Multiple Spin Echo, or PGMSE) are also applied to measurements of time dependent diffusion of laser polarized xenon gas, with results in good agreement with previous measurements on thermally polarized gas. The PGMSE technique is found to be superior to the PGE method, and to standard PGSE techniques and variants, for efficiently measuring laser polarized noble gas diffusion over a wide range of diffusion times. Copyright 1998 Academic Press.

NASA Discipline Environmental Health↗

The life cycle of the Interstellar Medium in other galaxies

Gas in spiral galaxies cycles between the diffuse and dense phases as clouds collapse, form stars and are dispersed back into the ISM. Far infrared observations of continuum emission from interstellar dust and line emission from interstellar gas have revealed a wealth of information on the state of the ISM in galaxies of different morphological types. The analysis of these observations gives us information about the processes of star formation and about the evolution of the ISM. Star formation rates vary widely from galaxy to galaxy, with the rates in starburst galaxies being 10 - 100 times those in quiescent spiral galaxies. Far infrared spectroscopy of star-forming galaxies shows that the interstellar pressure increases with star formation rate. The structure of the interstellar medium in starburst galaxies is quite different from that of quiescent galaxies - much of the mass and volume are in HII regions and photodissociation regions. The size distribution of dust grains seems to depend on environment; small grains are abundant in the diffuse interstellar medium but not in dense molecular star forming regions. Quiescent spiral and elliptical galaxies contain a significant population of small grains, but starburst galaxies do not. Dwarf irregular galaxies also seem to contain few small grains; this may be the result of the higher UV flux in these galaxies. The star forming regions in dwarf irregulars also have a higher ratio of atomic to molecular gas than do those in the Galaxy. These results show that the ISM in galaxies of different morphological types reaches different equilibria, resulting in different modes of star formation and global galaxy evolution.

Knapp, G. R.↗

Leveraging inter-firm influence in the diffusion of energy efficiency technologies: An agent-based model

Energy efficiency technologies (EETs) are crucial for saving energy and reducing carbon dioxide emissions. However, the diffusion of EETs in small and medium-sized enterprises is rather slow. Literature shows the interactions between innovation adopters and potential adopters have significant impacts on innovation diffusion. Enterprises lack the motivation to share information, and EETs usually lack observability, which suppress the inter-firm influence. Thus, an information platform, together with proper policies encouraging or forcing enterprises to disclose EET-related information, should help harness inter-firm influence to accelerate EETs' diffusion. To explore whether and how such an information platform affects EETs' diffusion in small and medium-sized enterprises, this report builds an agent-based model to mimic EET diffusion processes. Based on a series of controlled numerical experiments, some counter-intuitive phenomena are discovered and explained. The results show that the information platform is a double-edged sword that notably accelerates EETs' diffusion by approximately 47% but may also boost negative information to diffuse even faster and delay massive adoption of EETs. Increasing network density and the intensity of inter-firm influence are effective to speed EET diffusion, but their impacts diminish drastically after reaching some critical values (0.05 and 0.15 respectively) and eventually harm the stability of the system. Ultimately, the findings implicate that EET suppliers should carefully launch their promising but immature products; policies that can reduce the perceived risk by enterprises and the effort to maintain an informative rather than judgmental information platform can prominently mitigate the negative side effects brought by high fluidity of information.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Thermal transport in 2- and 3-dimensional periodic “holey” nanostructures

Understanding thermal transport in two- and three-dimensional periodic “holey” nanostructures is important for realizing applications of these structures in thermoelectrics, photonics and batteries. In terms of continuum heat diffusion physics, the effective medium theory provides the framework for obtaining the effective thermal conductivity of such structures. However, recently measured nanostructures possess thermal conductivities well below these continuum predictions. In some cases, their thermal conductivities are even lower than predictions that account for sub-continuum phonon transport. We analyze current understanding of thermal transport in such structures, discussing the various theories, the measurements and the insights gained from comparing the two.

36 MATERIALS SCIENCE↗

Some Mathematical and Geophysical Considerations in Radioisotope Dating Applications

Some quality considerations for use in isotopic dating are presented to identify and correct heretofore unidentified overestimate scenarios. These include to a lesser degree the statistical interpretation issues with linear-least-squares fitting results but more importantly the isotope effect in the individual components of the isochron coefficient ratios. By taking into consideration the isotope effect (differential mass diffusion rates) when measuring isotopic ratios from very old samples, the distribution dependency in the coefficient ratios will cause a bias if isotopic diffusion rates are not identical throughout a sample. The isotope effect is that isotopes having a smaller atomic mass will diffuse faster throughout a medium than will their heavier counterparts causing concentration gradients of their ratios even when there are no contributions from radioactive decay. The application to Rb/Sr dating is evaluated and shown to result in expected age overestimates when isotopic ratios are employed to linearize the isochron. A suggested method to test for this effect is argued to require rigorous statistical analysis. An associated optimal sampling technique would involve using single-grain etching. It is also shown that the only method to fully eliminate the isotope effect is to not use isotopic ratios at all in radioisotopic dating as the physics do not require the use of isotopic ratios for geochronological dating. However, without the ratios, the data are inherently noisy.

74 ATOMIC AND MOLECULAR PHYSICS↗

Effective gaseous diffusion coefficients of select ultra-fine, super-fine and medium grain nuclear graphite

Understanding “Where?” and “How much?” oxidation has occurred in a nuclear graphite component is critical to predicting any deleterious effects to physical, mechanical, and thermal properties. A key factor in answering these questions is characterizing the effective mass transport rates of gas species in nuclear graphites. Effective gas diffusion coefficients were determined for twenty-six graphite specimens spanning six modern grades of nuclear graphite. A correlation was established for the majority of grades examined allowing a reasonable estimate of the effective diffusion coefficient to be determined purely from an estimate of total porosity. The importance of Knudsen diffusion to the measured diffusion coefficients is also shown for modern grades. Furthermore, Knudsen diffusion has not historically been considered to contribute to measured diffusion coefficients of nuclear graphite.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Simulation of a longitudinally electron-beam-pumped nanoheterostructure semiconductor laser

A three-dimensional numerical model of a vertical-cavity surface-emitting laser (VCSEL) containing a resonance grating of quantum wells (QWs) is developed. The Helmholtz equation for a field and the diffusion equation for a medium, in which an electron beam is the source of charge carriers, are solved self-consistently, which allowed us to find the longitudinal and radial profiles of the generated field, its frequency, and the threshold pump current. The characteristics of the higher-order modes are calculated against the background of the frozen medium formed by the generated mode. The stability limit of the single-mode regime and the type of a mode at which lasing begins to develop with increasing pump power are found from calculations of the gain balance and losses for higher-order modes. An iteration algorithm is developed for calculating the parameters of a VCSEL with many QWs, the calculation time increasing linearly with the number of QWs. The profiles of the resonator modes and their frequency spectrum are calculated for a cylindrically symmetric VCSEL. The stability limits of single-mode lasing are determined. The results are compared qualitatively with experiments. (lasers)

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Non-equilibrium simulations of hydraulic permeation: Role of mechanical boundary conditions in dense membranes

Understanding the mechanisms of water transport in reverse osmosis membranes is critical for improving membrane performance and guiding material design. While classical models describe transport as either solution-diffusion (SD)—involving concentration-driven diffusion through a homogeneous medium—or pore-flow (PF)—involving pressure-driven convection through percolated water channels—their applicability to crosslinked polyamide membranes remains debated. Here, using non-equilibrium molecular dynamics simulations, we investigate the impact of mechanical support conditions on pressure-driven water transport in polyamide membranes across varying crosslink densities and pressure differentials (1000–5000 bar). Two support conditions are considered: graphene-restrained, representing experimentally relevant supported membranes, and freeze-restrained, mimicking a self-supported structure. In graphene-restrained systems, water concentration gradients and constant pressure profiles emerge, consistent with SD theory and incompatible with PF assumptions due to the absence of percolated pores and sub-nanometer voids. In contrast, freeze-restrained systems display uniform water concentration and linearly decreasing pressure at 1000 bar, and exhibit compressibility-induced water gradients and partial percolation at 5000 bar, resembling PF-like behavior. However, the underlying assumptions of PF theory—continuous solvent pathways and pressure transmission through water-filled pores—are not met under most conditions. Our results demonstrate that accurate modeling of reverse osmosis membranes must incorporate realistic mechanical boundary conditions to distinguish between transport mechanisms. For dense polyamide membranes supported by porous substrates, graphene-restrained simulations best reflect experimental setups and support the SD model as the dominant mechanism of water permeation.

molecular dynamics↗

Observation of electron plasma waves inside large amplitude electromagnetic pulses in a temporally growing plasma

Observation of electron plasma waves excited inside high power ({approx}10 kW) short pulse ({approx}20 {mu}s) electromagnetic (em) waves interacting with a gaseous medium (argon) in the pressure range 0.2-2.5 mTorr is reported. The waves have long wavelength ({approx}13 cm) and get damped at time scales slower ({approx}3 {mu}s) than the plasma period (0.1-0.3 {mu}s), the energy conveyed to the medium lead to intense ionization (ion density n{sub i} {approx} 10{sup 11} cm{sup -3} and electron temperature T{sub e} {approx} 6-8 eV) and rapid growth of the plasma ({approx}10{sup 5} s{sup -1}) beyond the waves. Time frequency analysis of the generated oscillations indicate the presence of two principal frequencies centered around 3.8 MHz and 13.0 MHz with a spread {Delta}f {approx} 4 MHz, representing primarily two population of electrons in the plasma wave. The experimental results are in reasonable agreement with a model that considers spatiotemporal forces of the em wave on the medium, space charges and diffusion.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗