Search NASA⌕ Search

SEARCH · Search NASA

Results for “dimensional”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Small-angle X-ray scattering: a bridge between RNA secondary structures and three-dimensional topological structures

Whereas the structures of small to medium-sized well folded RNA molecules often can be determined by either X-ray crystallography or NMR spectroscopy, obtaining structural information for large RNAs using experimental, computational, or combined approaches remains a major interest and challenge. RNA is very sensitive to small-angle X-ray scattering (SAXS) due to high electron density along phosphate-sugar backbones, whose scattering contribution dominates SAXS intensity. For this reason, SAXS is particularly useful in obtaining global RNA structural information that outlines backbone topologies and, therefore, molecular envelopes. Such information is extremely valuable in bridging the gap between the secondary structures and three-dimensional topological structures of RNAmolecules, particularly those that have proven difficult to study using other structuredetermination methods. Here we review published results of RNA topological structures derived from SAXS data or in combination with other experimental data, as well as details on RNA sample preparation for SAXS experiments.

59 BASIC BIOLOGICAL SCIENCES↗

One-dimensional nanoclustering of the Cu(100) surface under CO gas in the mbar pressure range

The bulk terminated Cu(100) surface becomes unstable in the presence of CO at room temperature when the pressure reaches the mbar range. Scanning tunneling microscopy images show that above 0.25 mbar the surface forms nanoclusters with CO attached to peripheral Cu atoms. At 20 mbar and above 3-atom wide one-dimensional nanoclusters parallel to < 001 > directions cover the surface, with CO on every Cu atom, increasing in density up to 115 mbar. Density functional theory explains the findings as a result of the detachment of Cu atoms from step edges caused by the stronger binding of CO relative to that on flat terraces.

Chemistry↗

Cubine, a Quasi Two-Dimensional Copper–Bismuth Nanosheet

We report on the discovery of a quasi two-dimensional copper–bismuth nano sheet from ab initio calculations, which we call cubine. According to our predictions, single layers of cubine can be isolated from the recently reported high-pressure CuBi bulk material at an energetic cost of merely ≈20 meV/Å2, comparable to values to separate single layers of graphene from graphite. Our calculations suggest that cubine has remarkable electronic and electrochemical properties: It is a superconductor with a moderate electron–phonon coupling λ = 0.5, leading to Tc ≈ 1 K, and can be readily intercalated with lithium with a high diffusibility, rendering it a promising candidate material to boost the rate capacity of current electrodes in lithium-ion batteries.

Amsler, Maximilian↗

Pd 2 Se 3 Monolayer: A Promising Two-Dimensional Thermoelectric Material with Ultralow Lattice Thermal Conductivity and High Power Factor

A high power factor and low lattice thermal conductivity are two essential ingredients of highly efficient thermoelectric materials. Although monolayers of transition-metal dichalcogenides possess high power factors, high lattice thermal conductivities significantly impede their practical applications. Our first-principles calculations show that these two ingredients are well fulfilled in the recently synthesized Pd 2 Se 3 monolayer, whose crystal structure is composed of [Se 2 ] 2- dimers, Se 2- anions, and Pd 2+ cations coordinated in a square-planar manner. Our detailed analysis of third-order interatomic force constants reveals that the anharmonicity and soft phonon modes associated with covalently bonded [Se 2 ] 2- dimers lead to ultralow lattice thermal conductivities in Pd 2 Se 3 monolayers (1.5 and 2.9 W m -1 K -1 along the a- and b-axes at 300 K, respectively), which are comparable to those of high-performance bulk thermoelectric materials such as PbTe. Moreover, the “pudding-mold” type band structure, caused by Pd 2+ (d 8 ) cations coordinated in a square-planar crystal field, leads to high power factors in Pd 2 Se 3 monolayers. Consequently, both electron- and hole-doped thermoelectric materials with a considerably high zT can be achieved at moderate carrier concentrations, suggesting that Pd 2 Se 3 is a promising two-dimensional thermoelectric material. Our results suggest that hierarchical chemical bonds, that is, coexistence of different types of chemical bonds, combined with a square-planar crystal field is a promising route for designing high-efficiency thermoelectric materials.

36 MATERIALS SCIENCE↗

Cr 2.37 Ga 3 Se 8 : A Quasi-Two-Dimensional Magnetic Semiconductor

We present a novel magnetic semiconductor, Cr 2.37 Ga 3 Se 8 , synthesized by partially replacing magnetic Cr 3+ in antiferromagnetic Cr 5+δ Se 8 with nonmagnetic Ga 3+ . The crystal structure of Cr 2.37 Ga 3 Se 8 was determined by both powder and single-crystal X-ray diffraction. The title compound crystallizes in a monoclinic structure with space group C2/m (No. 12). In Cr 2.37 Ga 3 Se 8 , the Cr atoms are surrounded by 6 Se atoms and form filled octahedral clusters, while Ga atoms are centered in the Se 4 tetrahedral clusters. The two kinds of clusters pack alternatingly along the c-axis, which results in a quasi-two-dimensional layered structure. The magnetization (M) measurement shows the development of short-range ferromagnetic coupling below the Curie-Weiss (CW) temperature θ CW ~ 92 K, evidenced by the nonlinear field dependence of M. However, the magnetic susceptibility exhibits a peak at low fields at ~18 K, indicating the existence of an antiferromagnetic interaction as well. Electronic structure calculations using the WIEN2k program in the local spin density approximation indicate that the magnetism arises exclusively from local moments of the Cr atoms. Here, the electrical resistivity measurement of the Cr 2.37 Ga 3 Se 8 sample confirms that this material is a semiconductor with the band gap ~0.26 eV. Meanwhile, the experimental band gap (~0.26 eV) is close to the theoretical prediction using the WIEN2k program (~0.35 eV).

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Extracting the Frequency-Dependent Dynamic Stokes Shift from Two-Dimensional Electronic Spectra with Prominent Vibrational Coherences

The dynamic Stokes shift is a common means for characterizing ultrafast solvation dynamics of electronically excited states. Here we extract the excitation frequency-dependent dynamic Stokes shift from two-dimensional electronic spectra (2DES) of cresyl violet, a molecule with a well-defined vibronic progression. The extracted dynamic Stokes shift function, S(t), exhibits oscillatory behavior, and the oscillatory components are assigned to intramolecular vibrational modes through DFT and TD-DFT calculations. Here, the well-characterized oscillations are incorporated into the fitting procedure of S(t). The excitation frequency dependence of the ultrafast response is examined through the analysis of S(t) obtained from slices taken at different excitation frequencies of the 2DES spectra. The extracted ultrafast timescales range from 36 to 98 fs, and we interpret the frequency dependence of the timescales in the context of other dynamic processes that also lead to lineshape changes in the 2DES spectrum, such as vibrational energy relaxation and spectral diffusion. Through comparison of the extracted timescales, we find that the fastest timescales are extracted over a range of excitation frequencies, where contributions from vibrational relaxation and spectral diffusion can be minimized.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Inelastic Triatom-Atom Quantum Close-Coupling Dynamics in Full Dimensionality: All Rovibrational Mode Quenching of Water Due to the H Impact on a Six-Dimensional Potential Energy Surface

The rovibrational level populations, and subsequent emission in various astrophysical environments, are driven by inelastic collision processes. The available rovibrational rate coefficients for water have been calculated using a number of approximations. We present a numerically exact calculation for the rovibrational quenching for all water vibrational modes due to collisions with atomic hydrogen. The scattering theory implements a quantum close-coupling (CC) method on a high level ab initio six-dimensional (6D) potential energy surface (PES). Total rovibrational quenching cross sections for excited bending levels were compared with earlier results on a 4D PES with the rigid-bender closecoupling (RBCC) approximation. General agreement between 6D-CC and 4DRBCC calculations are found, but differences are evident including the energy and amplitude of low-energy orbiting resonances. Quenching cross sections from the symmetric and asymmetric stretch modes are provided for the first time. The current 6D-CC calculation provides accurate inelastic data needed for astrophysical modeling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Two-Dimensional Crystallization of Poly( N -isopropylacrylamide)-Capped Gold Nanoparticles

Surface-sensitive X-ray reflectivity and grazing incidence small-angle X-ray scattering reveal the structure of polymer-capped-gold nanoparticles (AuNPs that are grafted with poly(N-isopropylacrylamide); PNIPAM–AuNPs) as they self-assemble and crystallize at the aqueous suspension/vapor interface. Citrate-stabilized AuNPs (5 and 10 nm in nominal diameter) are ligand-exchanged by 6 kDa PNIPAM-thiol to form corona brushes around the AuNPs that are highly stable and dispersed in aqueous suspensions. Surprisingly, no clear evidence of thermosensitive effect on surface enrichment or self-assembly of the PNIPAM–AuNPs is observed in the 10–35 °C temperature range. However, addition of simple salts (in this case, NaCl) to the suspension induces migration of the PNIPAM–AuNPs to the aqueous surface, and above a threshold salt concentration, two-dimensional crystals are formed. In conclusion, the 10 nm PNIPAM–AuNPs form a highly ordered single layer with in-plane triangular structure, whereas the 5 nm capped NPs form short-range triangular structure that gradually becomes denser as salt concentration increases.

36 MATERIALS SCIENCE↗

Two-Dimensional Holey Co 3 O 4 Nanosheets for High-Rate Alkali-Ion Batteries: From Rational Synthesis to in Situ Probing

A general template-directed strategy is developed for the controlled synthesis of two-dimensional (2D) assembly of Co 3 O 4 nanoparticles (ACN) with unique holey architecture and tunable hole sizes that enable greatly improved alkali-ion storage properties (demonstrated for both Li and Na ion storage). The as-synthesized holey ACN with 10 nm holes exhibit excellent reversible capacities of 1324 mAh/g at 0.4 A/g and 566 mAh/g at 0.1 A/g for Li and Na ion storage, respectively. The improved alkali-ion storage properties are attributed to the unique interconnected holey framework that enables efficient charge/mass transport as well as accommodates volume expansion. In situ TEM characterization is employed to depict the structural evolution and further understand the structural stability of 2D holey ACN during the sodiation process. The results show that 2D holey ACN maintained the holey morphology at different sodiation stages because Co 3 O 4 are converted to extremely small interconnected Co nanoparticles and these Co nanoparticles could be well dispersed in a Na 2 O matrix. These extremely small Co nanoparticles are interconnected to provide good electron pathway. In addition, 2D holey Co 3 O 4 exhibits small volume expansion (~6%) compared to the conventional Co 3 O 4 particles. The 2D holey nanoarchitecture represents a promising structural platform to address the restacking and accommodate the volume expansion of 2D nanosheets for superior alkali-ion storage.

2D holey assembly of nanoparticles↗

Proximity Spin–Orbit Torque on a Two-Dimensional Magnet within van der Waals Heterostructure: Current-Driven Antiferromagnet-to-Ferromagnet Reversible Nonequilibrium Phase Transition in Bilayer CrI 3

The recently discovered two-dimensional magnetic insulator CrI 3 is an intriguing case for basic research and spintronic applications since it is a ferromagnet in the bulk but an antiferromagnet in bilayer form, with its magnetic ordering amenable to external manipulations. Using the first-principles quantum transport approach, we predict that injecting unpolarized charge current parallel to the interface of the bilayer-CrI 3 /monolayer-TaSe 2 van der Waals (vdW) heterostructure will induce spin–orbit torque and thereby drive the dynamics of magnetization on the first monolayer of CrI 3 in direct contact with TaSe 2 . By combining the calculated complex angular dependence of spin–orbit torque with the Landau-Lifshitz-Gilbert equation for classical dynamics of magnetization, we demonstrate that current pulses can switch the direction of magnetization on the first monolayer to become parallel to that of the second monolayer, thereby converting CrI 3 from antiferromagnet to ferromagnet while not requiring any external magnetic field. We explain the mechanism of this reversible current-driven nonequilibrium phase transition by showing that first monolayer of CrI 3 carries current due to evanescent wave functions injected by metallic transition metal dichalcogenide TaSe 2 , while concurrently acquiring strong spin–orbit coupling via such a proximity effect, whereas the second monolayer of CrI 3 remains insulating. Furthermore, the transition can be detected by passing vertical read current through the vdW heterostructure, encapsulated by a bilayer of hexagonal boron nitride and sandwiched between graphite electrodes, where we find a tunneling magnetoresistance of ≃240%.

2D magnetic materials↗

Quasi-Two-Dimensional Earth-Abundant Bimetallic Electrocatalysts for Oxygen Evolution Reactions

The extremely large surface area offered by quasi-two-dimensional (2D) nanostructures is a great advantage for catalytic applications. While bimetallic materials have been discovered as a group of promising catalysts for electrochemical water splitting, a facile and reliable synthesis approach toward 2D morphology to fully release its electrochemical catalytic potential is still lacking. In this work, bimetallic Co–Mo–O ultrathin nanosheets were synthesized by ionic layer epitaxy with controlled composition ratio. The Co–Mo–O nanosheets exhibited a quadrangle shape with a uniform thickness of ~2.5 nm. This 2D morphology largely enriched the surface catalytic active site ratio. Particularly, nanosheets with 2:1 Co-to-Mo ratio showed a substantially enhanced OER catalytic activity with a 3 orders of magnitude higher mass activity compared to benchmark IrO 2 and RuO 2 in an alkaline environment. Furthermore, this study introduces a promising possibility for creating high-performance electrocatalysts from 2D bimetallic materials with a high efficiency for material utilization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗