Search NASA⌕ Search

SEARCH · Search NASA

Results for “dislocation density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Elucidating the microscopic origin of electrochemical corrosion and electrical conductivity by lattice response to severe plastic deformation in Al-Mn-Si alloy

Highlights: • Al-Mn-Si specimens were underwent severe plastic deformation by CGP and cold-rolling and their combined routes. • Microscopical observations depicted particles' fragmentation and non-preferential distribution under heavy straining. • XRD analysis revealed dislocations annihilation and lattice swelling (d-spacing increase) due to dynamic recrystallization. • Polarization outputs disclosed direct correlation of corrosion behavior with dislocations density. • Four-point probe test proved that electrical conductivity was a function of lattice d-spacing. - Abstract: Al-Mn-Si specimens were underwent SPD by CGP, cold-rolling and their combined paths. Acquired OM and SEM micrographs revealed that random distribution of intermetallic precipitates beside their fragmentation under heavy imposed strains deteriorated particles’ influence on the electrochemical corrosion and inhibited pitting. Analysis of XRD patterns pointed out that post-rolling of CGPed sheets resulted in dynamic annihilation of dislocations and accordingly crystal lattice swelling (d-spacing increase) due to dynamic recrystallization. From polarization results, crystallites’ refinement along with density increment of sub-grain boundaries within structure as a consequence of SPD beside dislocation density enhancement accelerated corrosion. Outputs of four-point probe electrical conductivity examination indicated that apart from the employed processing, lattice compaction and atomic layers approach would limit the electrons’ mobility space and hence reduce the conductivity of material. In this regard, combined effects of CGP and rolling as employed dual-straining route on Al-Mn-Si alloy enhanced the electrical conductivity by d-spacing growth.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Strain relaxation in epitaxial SrRuO{sub 3} thin films on LaAlO{sub 3} substrates

Strain relaxation behavior of epitaxial SrRuO{sub 3} thin films on (001) LaAlO{sub 3} substrates was investigated using high resolution X-ray diffraction. Lattice distortion and dislocation densities were systematically studied with samples under different growth conditions. Reciprocal space maps reveal different strain relaxation behavior in SrRuO{sub 3} thin films grown at different temperatures. Two kinds of strain relaxation mechanisms were proposed to understand the growth dynamics, including the evolution of threading dislocations and the tilt of crystalline planes.

36 MATERIALS SCIENCE↗

Statistics of dislocation pinning at localized obstacles

Pinning of dislocations at nanosized obstacles like precipitates, voids, and bubbles is a crucial mechanism in the context of phenomena like hardening and creep. The interaction between such an obstacle and a dislocation is often studied at fundamental level by means of analytical tools, atomistic simulations, and finite element methods. Nevertheless, the information extracted from such studies cannot be utilized to its maximum extent on account of insufficient information about the underlying statistics of this process comprising a large number of dislocations and obstacles in a system. Here, we propose a new statistical approach, where the statistics of pinning of dislocations by idealized spherical obstacles is explored by taking into account the generalized size-distribution of the obstacles along with the dislocation density within a three-dimensional framework. Starting with a minimal set of material parameters, the framework employs the method of geometrical statistics with a few simple assumptions compatible with the real physical scenario. The application of this approach, in combination with the knowledge of fundamental dislocation-obstacle interactions, has successfully been demonstrated for dislocation pinning at nanovoids in neutron irradiated type 316-stainless steel in regard to the non-conservative motion of dislocations. An interesting phenomenon of transition from rare pinning to multiple pinning regimes with increasing irradiation temperature is revealed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The influence of Mo addition on the microstructure and its thermal stability for electrodeposited Ni films

Highlights: • The effect of Mo and saccharin additions on the stability of Ni layers was studied. • Both Mo and saccharin increased the defect density and reduced the grain size. • The higher Mo content resulted in a much better thermal stability. • At the same time, saccharin addition yielded a reduced stability of nanostructures. • The electrodeposited film had a better stability than the SPD-processed counterpart. - Abstract: An investigation was conducted to study the effect of molybdenum (Mo) alloying on the grain size and lattice defect structure in nanocrystalline nickel (Ni) films processed by electrodeposition. Moreover, the influence of saccharin addition to the electrolyte bath on the microstructure of Ni-Mo layers with low and high Mo contents was studied. It was found that the higher Mo content resulted in a larger dislocation density and twin fault probability as well as a smaller grain size. The addition of saccharin to the bath resulted in a further increase in the density of both dislocations and twin faults. It was also revealed that Mo alloying improved the thermal stability of the nanostructure in Ni films while saccharin addition yielded a reduction of stability. The reasons for these opposite behaviors were discussed in detail. In addition, the defect structure and its stability in Ni-Mo layers were compared with that for fine-grained bulk samples with the same composition but processed by severe plastic deformation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Three-dimensional evaluation of gettering ability for oxygen atoms at small-angle tilt boundaries in Czochralski-grown silicon crystals

Three-dimensional distribution of oxygen atoms at small-angle tilt boundaries (SATBs) in Czochralski-grown p-type silicon ingots was investigated by atom probe tomography combined with transmission electron microscopy. Oxygen gettering along edge dislocations composing SATBs, post crystal growth, was observed. The gettering ability of SATBs would depend both on the dislocation strain and on the dislocation density. Oxygen atoms would agglomerate in the atomic sites under the tensile hydrostatic stress larger than about 2.0 GPa induced by the dislocations. It was suggested that the density of the atomic sites, depending on the tilt angle of SATBs, determined the gettering ability of SATBs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Characterization of Dislocations and Micropipes in 4H n+ SiC Substrates

Etching of 4H-SiC wafers in molten KOH as a method for micropipe and dislocation density analysis was investigated. The obtained results were correlated with those of the synchrotron white beam x-ray topography. Heavily nitrogen-doped SiC shows a significantly different etching behavior in comparison with the low-doped material. This complicates identification of different types of threading defects. In particular, it is difficult to separate Threading Screw Dislocations (TSD) from Threading Edge Dislocations (TED). Depending on the level of doping and thermal history of the crystal, some of the etch pits emerging due to the 1c screw dislocations can be as large as those due to the micropipes.

36 MATERIALS SCIENCE↗

On the measurement of dislocations and dislocation substructures using EBSD and HRSD techniques

The accumulation of the dislocations and development of dislocation structures in plastically deformed Ni201 is examined using dedicated analyses of Electron Back-Scatter Diffraction (EBSD) acquired orientation maps, and High-Resolution Synchrotron Diffraction (HRSD) acquired patterns. The results show that the minimum detectable microstructure-averaged (bulk) total dislocation density ($ρ_T$) measured via HRSD is approximately 1E13 m -2 , while the minimum GND density ($ρ_G$) measured via EBSD is approximately 2E12 m -2 - the EBSD technique being more sensitive at low plastic strain. This highlights complementarity of the two techniques when attempting to quantify amount of plastic deformation (damage) in a material via a measurement of present dislocations and their structures. Furthermore, a relationship between EBSD-measured $ρ_G$ and the size of HRSD-measured Coherently Scattering Domains (CSDs) has been mathematically derived - this allows for an estimation of the size of CSDs from EBSD-acquired orientation maps, and conversely an estimation of $ρ_G$ from HRSD-measured size of CSDs. The measured evolution of ($ρ_T$), and $ρ_G$ is compared with plasticity theory models - the current results suggest that Ashby's single-slip model underestimates the amount of ONDs ($ρ_G$), while Taylor's model is correctly predicting the total amount of dislocation ($ρ_T$) present in the material as a function of imparted plastic strain.

36 MATERIALS SCIENCE↗

Structural representation of additively manufactured 316L austenitic stainless steel

Three 316L stainless steel materials are studied and reported upon; wrought, as-built additively manufactured (AM), and heat-treated AM material. The AM material was produced from the laser engineered net shaping (LENS) process. Macroscopic uniaxial compression stress-strain curves were obtained for all three materials. The curves were similar for the wrought and heat-treated AM materials but the as-built AM material demonstrated approximately 1.7 times greater flow stress at any given level of strain than the other two materials. Electron-backscatter diffraction analysis of the materials also showed that the microstructures of the three materials differed; with complex grain morphology for the as-built AM material. The mean grain size of each of the three materials also differed. Furthermore, the initial dislocation density was also measured with neutron diffraction and line-profile analysis for both wrought and as-built AM materials with the density in the AM material approximately 2.5 times greater.

36 MATERIALS SCIENCE↗

High mobility AlGaN/GaN heterostructures grown on Si substrates using a large lattice-mismatch induced stress control technology

A large lattice-mismatch induced stress control technology with a low Al content AlGaN layer has been used to grow high quality GaN layers on 4-in. Si substrates. The use of this technology allows for high mobility AlGaN/GaN heterostructures with electron mobility of 2040 cm{sup 2}/(V·s) at sheet charge density of 8.4 × 10{sup 12 }cm{sup −2}. Strain relaxation and dislocation evolution mechanisms have been investigated. It is demonstrated that the large lattice mismatch between the low Al content AlGaN layer and AlN buffer layer could effectively promote the edge dislocation inclination with relatively large bend angles and therefore significantly reduce the dislocation density in the GaN epilayer. Our results show a great potential for fabrication of low-cost and high performance GaN-on-Si power devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Stochastic dislocation kinetics and fractal structures in deforming metals probed by acoustic emission and surface topography measurements

We demonstrate that the fractal dimension (FD) of the dislocation population in a deforming material is an important quantitative characteristic of the evolution of the dislocation structure. Thus, we show that peaking of FD signifies a nearing loss of uniformity of plastic flow and the onset of strain localization. Two techniques were employed to determine FD: (i) inspection of surface morphology of the deforming crystal by white light interferometry and (ii) monitoring of acoustic emission (AE) during uniaxial tensile deformation. A connection between the AE characteristics and the fractal dimension determined from surface topography measurements was established. As a common platform for the two methods, the dislocation density evolution in the bulk was used. The relations found made it possible to identify the occurrence of a peak in the median frequency of AE as a harbinger of plastic instability leading to necking. It is suggested that access to the fractal dimension provided by AE measurements and by surface topography analysis makes these techniques important tools for monitoring the evolution of the dislocation structure during plastic deformation—both as stand-alone methods and especially when used in tandem.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The source of the threading dislocation in GaSb/GaAs hetero-structures and their propagation mechanism

The misfit and threading dislocations during GaSb epitaxy on GaAs substrate were investigated by weak beam dark field and high angle dark field scanning transmission electron microscopy. The geometric phase analysis and dislocation density tensor analysis were next used to analyze the strain around the threading dislocations and quantify the corresponding Burgers vectors. It is shown that there are three types of threading dislocations (mixed, edge, and pair of mixed types) close to the interface, which originate from the 60 Degree-Sign , Lomer, and 60 Degree-Sign pair misfit dislocations, respectively. During the growth of the epitaxial layer, the edge type as well as the pair of mixed threading dislocations split into two mixed type dislocations for the glide in {l_brace}111{r_brace} planes. Eventually, only mixed type dislocations have been observed at the surface of thick GaSb layers.

36 MATERIALS SCIENCE↗

Investigation of the role of deposition rate on optical, microstructure and ethanol sensing characteristics of nanostructured Sn doped In2O3 films

Highlights: • Deposition rate can play an important role in gas sensing of In{sub 2}O{sub 3}:Sn films. • The crystallite size and linear defects of the films is estimated by eCMWP method. • The correlation between the optical, microstructure and gas sensing properties is studied. • The size distribution behavior of samples is in agreement with the results of porosity. • Optimum deposition rate for In{sub 2}O{sub 3}:Sn films is 0.2 nm/s. - Abstract: In this paper, Sn doped In{sub 2}O{sub 3} (In{sub 2}O{sub 3}:Sn) nanostructured films as metal oxide semiconductor material which is very important in optoelectronics and gas sensing industries, were prepared by thermal evaporation technique. It is discussed how different deposition rate (0.1, 0.2, 0.3 and 0.4 nm/s) affects the optical, electrical, microstructural and ethanol gas sensing characteristics of In{sub 2}O{sub 3}:Sn films and must be precisely monitored. The gas sensing performance of the films was evaluated in terms of gas concentration and operating temperature. A correlation between the crystallite size, porosity, dislocation density, outer cut-off radius of dislocation, optical band gap, activation energy and sensitivity of the films was established. The results demonstrate that the maximum sensitivity to ethanol vapors can be obtained for the sample grown at deposition rate of 0.2 nm/s. The response and recovery times of this sensor exposed to 100 ppm of ethanol vapors were determined and found to be 9.0 s and 3.9 s, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Crystal plasticity modeling of irradiation growth in Zircaloy-2

A reaction-diffusion based mean field rate theory model is implemented in the viscoplastic self-consistent (VPSC) crystal plasticity framework to simulate irradiation growth in hcp Zr and its alloys. A novel scheme is proposed to model the evolution (both number density and radius) of irradiation-induced dislocation loops that can be informed directly from experimental data of dislocation density evolution during irradiation. This framework is used to predict the irradiation growth behavior of cold-worked Zircaloy-2 and trends compared to available experimental data. The role of internal stresses in inducing irradiation creep is discussed. Effects of grain size, texture, and external stress on the coupled irradiation growth and creep behavior are also studied.

36 MATERIALS SCIENCE↗

A method to predict fatigue crack initiation in metals using dislocation dynamics

Abstract A theory is proposed to predict the initiation of fatigue cracks using cyclic dislocation dynamics (DD) simulations. The evolution of dislocation networks in a grain is simulated over several cycles. It is shown that the dislocation density and the energy stored in the dislocation networks increase with the number of cycles. The results of the DD simulations are used to construct an energy balance expression for crack initiation. A hypothetical crack is inserted into the grain, and the Gibbs energy consisting of the energy of the dislocation structure, the surface energy of the hypothetical crack, and the reduction in continuum energy is evaluated. Once the Gibbs energy attains a maximum, the dislocation structure becomes unstable, and it becomes energetically more favorable to form a real crack. The proposed method is applied to oxygen-free high conductivity copper, and the results are compared against experiments. Finally, it is shown how the method can be amended to account for environmental effects.

Electrochemistry↗

Effect of temperature on the nano/microstructure and mechanical behavior of nanotwinned Ag films

In situ and ex situ annealed nanotwinned (NT) Ag thin films have been investigated by TEM and tensile testing to reveal the thermal stability of the twin boundaries, grain boundaries, dislocation densities, and their respective influence of the macroscopic yield stress. The NT Ag films synthesized by magnetron sputtering form both coherent (CTB, Σ3{111}) and incoherent (ITB, Σ3{112}) twin boundaries that are thermally stable up to 473 K (200 Celsius), i.e., no obvious changes in grain size, twin spacing, and yield stress. In situ TEM observations show the dislocations become mobile at 453 K (180 Celsius) resulting in dislocation annihilation primarily at twin and grain boundaries. Rotation of grains with low-angle grain boundaries was observed during in situ heating, resulting in the growth of columnar grains above 453 K (180 Celsius). However, no noticeable changes in the spacings of CTBs were observed during the entire in situ and ex situ annealing [up to 873 K (600 Celsius)]. The increase in grain size and concomitant decrease in yield stress following annealing at various temperatures can be described by the Hall-Petch relationship, demonstrating that grain size rather than twin spacing is most sensitive to thermal annealing and plays a dominant role in the deformation of NT Ag films.

36 MATERIALS SCIENCE↗

Laser shocking of materials: Toward the national ignition facility

In recent years a powerful experimental tool has been added to the arsenal at the disposal of the materials scientist investigating materials response at extreme regimes of strain rates, temperatures, and pressures: laser compression. In this paper, this technique has been applied successfully to mono-, poly-, and nanocrystalline metals and the results have been compared with predictions from analytical models and molecular dynamics simulations. Special flash x-ray radiography and flash x-ray diffraction, combined with laser shock propagation, are yielding the strength of metals at strain rates on the order of 10 7 –10 8 s -1 and resolving details of the kinetics of phase transitions. A puzzling result is that experiments, analysis, and simulations predict dislocation densities that are off by orders of magnitude. Finally, other surprises undoubtedly await us as we explore even higher pressure/strain rate/temperature regimes enabled by the National Ignition Facility.

36 MATERIALS SCIENCE↗

Compositionally graded Ga 1-x In x P buffers grown by static and dynamic hydride vapor phase epitaxy at rates up to 1 μm/min

Here, we demonstrate Ga 1-x In x P compositionally graded buffers (CGBs) grown on GaAs with lattice constants between GaAs and InP by hydride vapor phase epitaxy (HVPE). Growth rates were up to ~1 μm/min and threading dislocation density (TDD) was as low as 1.0 x 10 6 cm -2 . We studied the effect of substrate offcut direction, growth rate, and strain grading rate on CGB defect structure. We compared the effect of a “dynamic grading” style, which creates compositional interfaces via mechanical transfer of a substrate between two growth chambers, vs. “static grading” where the CGB grows in a single chamber. Dynamic grading yielded smoother grades with higher relaxation, but TDD was not significantly different between the two styles. Substrate offcut direction was the most important factor for obtaining CGBs with low defect density. (001) substrates offcut towards (111)B yielded smoother CGBs with lower TDD compared to CGBs grown on substrates offcut towards (111)A. Transmission electron microscopy of static and dynamic CGBs grown on A and B-offcuts only found evidence of phase separation in a static A-offcut CGB, indicating that the B offcut limits phase separation, which in turn keeps TDD low. Reduced growth rate led to the appearance CuPt-type atomic ordering, which affected the distribution of dislocations on the active glide planes but did not alter TDD. Higher growth rates led to smoother CGBs and did not appreciably increase TDD as otherwise predicted by steady-state models of plastic relaxation. These results show HVPE’s promise for lattice-mismatched applications and low-c ost InP virtual substrates on GaAs

36 MATERIALS SCIENCE↗

Strength-ductility synergy through microstructural and compositional heterogeneity in directed energy deposition additive manufacturing of face-centered cubic materials

Directed energy deposition (DED) is an additive manufacturing (AM) process based on welding technology and offers the advantages of large build volume, high deposition rate, and ability to fabricate multi-material parts. Epitaxial continuous columnar grain growth is a characteristic microstructural feature of DED processed alloys. In this study, a bamboo-like microstructure (periodic alternation of equiaxed and columnar structure) was produced by adopting an intermittent deposition strategy in 316L stainless steel and Inconel 625. The formation of a bamboo-like alternating microstructure was confirmed through electron backscattered diffraction (EBSD) analysis. Hardness mapping showed that the columnar to equiaxed transition (CET) occurred at the region right below the fusion line. A finite element (FE) model was used to investigate the relationship between the temperature gradient (G) and the solidification rate (R). The FE model showed a low G/R ratio at the region right below the interface promoting the CET. The grain size and material-dependent deformation behaviors are analyzed using digital image correlation (DIC). The lower deformation on the fine-grain regions observed in DIC analysis is attributed to a higher strain hardening rate, which is confirmed through dislocation density analysis on a tensile-interrupted specimen. The periodically alternating grain size coupled with the microstructural changes caused by intermittent deposition strategy result in a better strength-ductility synergy in both single-material and bimetallic specimens.

36 MATERIALS SCIENCE↗