Search NASA⌕ Search

SEARCH · Search NASA

Results for “distribution line modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Winter bulge and diurnal variations in hydrogen inferred from AE-C composition measurements

In situ mass spectrometric measurements of ion and neutral particle thermospheric compositions have been used to infer the latitudinal and diurnal variations of thermospheric atomic hydrogen for solstice conditions. Local time-dependent and local time-independent components of the observed hydrogen distribution were separated on the basis of a model generated by expanding the log of neutral hydrogen concentration in terms of spherical harmonics. Results are compared with analogous data on N2 concentration; the comparison reveals an anticorrelation between gas temperature and hydrogen concentration. The slope of this anticorrelation line represents the 'zero flux condition' from the exosphere theory of Hodges (1973), thus further bearing out the conclusion that exospheric flow is the dominant process governing the global distribution of hydrogen.

Brinton, H. C.↗

Energy distribution in the strongly interacting binary system SX Cassiopeiae

IUE spectra and optical scans covering the 110-680 nm interval were obtained in a search for a source which would resolve the anomalous presence of strong Balmer emission lines in the SX Cas eclipsing binary system, which is inconsistent with the usual spectral classification of the components as A6 III + G6 III. The IUE spectra unexpectedly show such strong emission lines as those of C IV, N V and Si IV, which require higher temperatures that the already anomalously high Balmer lines, and a continuum several magnitudes higher than the extrapolated continuum of an A6 star. A model in which the UV continuum originates in the transition zone between the A6 star and an accretion disk fails to reproduce the observed energy distribution. A revision of component spectral types to B7 + K3 III removes the UV excess.

Plavec, M. J.↗

Sound propagation and absorption in foam - A distributed parameter model.

Liquid-base foams are highly effective sound absorbers. A better understanding of the mechanisms of sound absorption in foams was sought by exploration of a mathematical model of bubble pulsation and coupling and the development of a distributed-parameter mechanical analog. A solution by electric-circuit analogy was thus obtained and transmission-line theory was used to relate the physical properties of the foams to the characteristic impedance and propagation constants of the analog transmission line. Comparison of measured physical properties of the foam with values obtained from measured acoustic impedance and propagation constants and the transmission-line theory showed good agreement. We may therefore conclude that the sound propagation and absorption mechanisms in foam are accurately described by the resonant response of individual bubbles coupled to neighboring bubbles.

Manson, L.↗

Are groups of galaxies virialized systems?

Groups are systems of galaxies with crossing times t(cr) much smaller than the Hubble time. Most of them have t(cr) less than 0.1/H0. The usual interpretation is that they are in virial equilibrium. We compare the data of the group catalog selected from the CfA redshift survey extension with different N-body models. We show that the distributions of kinematic and dynamical quantities of the groups in the CfA catalog can be reproduced by a single collapsing group observed along different line of sights. This result shows that (1) projection effects dominate the statistics of these systems, and (2) observed groups of galaxies are probably still in the collapse phase.

Diaferio, Antonaldo↗

A Search for Supernova in Star-Burst Galaxies

The rate at which massive supernovae occur in galaxies can be related directly to the rate of formation of massive stars this rate in turn can be computed from measurements and theoretical models of stellar mss distributions. Other measurements such as chemical composition and the dynamical structure of galaxies can also be used to infer the rate of massive supernovae. Various lines of reasoning using these measurements and theories of star formation have predicted a supernova rate which might be as much as ten times the rate of supernovae that had been observed using optical telescopes. The unseen supernovae were thought to be undetected due to a variety of circumstances, with the primary problem being extinction imposed by dust along the line of observation. This research used new infrared observations of the Infrared Space Observatory (ISO) space craft to explore active galaxies with a technique unhindered by dust extinction. New image processing algorithms for ISO point source analysis and cosmic ray deglitching were developed in order to search through a fairly complete set of the ISO data.

Rank, David M.↗

Improving Lightning NO(x) Parameterizations for Global Chemical Transport Models

Parameterization of lightning NO(x) in global chemical transport models requires a method to specify the temporal and geographic distribution of flash rates, an estimate of NO production per flash, and a method to specify the effective vertical distribution of NO production. Flash rate parameterizations using the upward convective cloud mass flux have been developed and tested for several GCM and assimilated meteorological data sets. This parameterization and others involving the cloud-top height and convective precipitation provide a generally acceptable climatological distribution of flashes after normalization with satellite data. However, considerable improvement in terms of geographic and temporal variability may be achieved in the future using cloud microphysics data available from next-generation GCMs. Cloud-resolving case-study simulations of convective transport and lightning NO production have yielded results which are directly applicable to the NO production per flash and the vertical NO distribution portions of the global model lightning parameterizations. In this work we have used cloud-resolving models (the Goddard Cumulus Ensemble Model (GCE) and MM5) to drive an off-line cloud-scale chemical transport model (CSCTM). The CSCTM, in conjunction with aircraft measurements of NO(x) in thunderstorms and ground-based lightning observations, has been used to constrain the amount of NO produced per flash. Observed lightning flash rates have been incorporated into the CSCTM, and several scenarios of NO production per intracloud (IC) and per cloud-to-ground (CG) flash have been tested in each of several case study storms. The resulting NO(x) mixing ratios are compared with aircraft measurements taken within the storm (typically the anvil region) to determine the most likely NO production scenario. The range of values of NO production per flash (or per meter of lightning channel length) that have been deduced from the model will be shown and compared with values of production in the literature that have been deduced from observed NO spikes and from anvil flux calculations. Results show that on a per flash basis, IC flashes are nearly as productive of NO as CG flashes. Estimates of mean NO production per flash vary by a factor of three from one simulated storm to another. Vertical profiles of lightning NOx mass at the end of the 3-D storm simulations have been summarized to yield suggested profiles for use in global models. These profiles show a larger percentage of the total lightning NO(x) mass in the free troposphere than those suggested by Pickering et al. (1998).

Pickering, Kenneth E.↗

B- and A-Type Stars in the Taurus-Auriga Star-Forming Region

We describe the results of a search for early-type stars associated with the Taurus-Auriga molecular cloud complex, a diffuse nearby star-forming region noted as lacking young stars of intermediate and high mass. We investigate several sets of possible O, B, and early A spectral class members. The first is a group of stars for which mid-infrared images show bright nebulae, all of which can be associated with stars of spectral-type B. The second group consists of early-type stars compiled from (1) literature listings in SIMBAD, (2) B stars with infrared excesses selected from the Spitzer Space Telescope survey of the Taurus cloud, (3) magnitude- and color-selected point sources from the Two Micron All Sky Survey, and (4) spectroscopically identified early-type stars from the Sloan Digital Sky Survey coverage of the Taurus region. We evaluated stars for membership in the Taurus-Auriga star formation region based on criteria involving: spectroscopic and parallactic distances, proper motions and radial velocities, and infrared excesses or line emission indicative of stellar youth. For selected objects, we also model the scattered and emitted radiation from reflection nebulosity and compare the results with the observed spectral energy distributions to further test the plausibility of physical association of the B stars with the Taurus cloud. This investigation newly identifies as probable Taurus members three B-type stars: HR 1445 (HD 28929), τ Tau (HD 29763), 72 Tau (HD 28149), and two A-type stars: HD 31305 and HD 26212, thus doubling the number of stars A5 or earlier associated with the Taurus clouds. Several additional early-type sources including HD 29659 and HD 283815 meet some, but not all, of the membership criteria and therefore are plausible, though not secure, members.

B- and A-Type↗

Heat transfer distributions around nominal ice accretion shapes formed on a cylinder in the NASA Lewis Icing Research Tunnel

Local heat transfer coefficients were obtained on irregular cylindrical shapes which typify the accretion of ice on circular cylinders in cross flow. The shapes were 2, 5, and 15 min accumulations of glaze ice and 15 min accumulation of rime ice. These icing shapes were averaged axially to obtain a nominal shape of constant cross section for the heat transfer tests. Heat transfer coefficients were also measured around the cylinder with no ice accretion. The models were run in a 15.2 x 68.6 cm (6 x 27 in.) wind tunnel at several velocities. The models were also run with a turbulence producing grid which gave about 3.5 percent turbulence. The effect of roughness was also simulated with sand grains glued to the surface. Results are presented as Nusselt number versus angle from the stagnation line for the smooth and rough models for both high and low levels of free stream turbulence. Roughness of the surface in the region prior to flow separation plays a major role in determining the heat transfer distribution. Free stream turbulence does not affect the distribution of heat transfer in this region but raises the level by a nearly uniform amount. For the rime shape, roughness had a larger effect in the near wedge shaped region past the initial separation point.

Van Fossen, G. J.↗

Visualizing Flutter Mechanism as Traveling Wave Through Animation of Simulation Results for the Semi-Span Super-Sonic Transport Wind-Tunnel Model

It has long been recognized that frequency and phasing of structural modes in the presence of airflow play a fundamental role in the occurrence of flutter. Animation of simulation results for the long, slender Semi-Span Super-Sonic Transport (S4T) wind-tunnel model demonstrates that, for the case of mass-ballasted nacelles, the flutter mode can be described as a traveling wave propagating downstream. Such a characterization provides certain insights, such as (1) describing the means by which energy is transferred from the airflow to the structure, (2) identifying airspeed as an upper limit for speed of wave propagation, (3) providing an interpretation for a companion mode that coalesces in frequency with the flutter mode but becomes very well damped, (4) providing an explanation for bursts of response to uniform turbulence, and (5) providing an explanation for loss of low frequency (lead) phase margin with increases in dynamic pressure (at constant Mach number) for feedback systems that use sensors located upstream from active control surfaces. Results from simulation animation, simplified modeling, and wind-tunnel testing are presented for comparison. The simulation animation was generated using double time-integration in Simulink of vertical accelerometer signals distributed over wing and fuselage, along with time histories for actuated control surfaces. Crossing points for a zero-elevation reference plane were tracked along a network of lines connecting the accelerometer locations. Accelerometer signals were used in preference to modal displacement state variables in anticipation that the technique could be used to animate motion of the actual wind-tunnel model using data acquired during testing. Double integration of wind-tunnel accelerometer signals introduced severe drift even with removal of both position and rate biases such that the technique does not currently work. Using wind-tunnel data to drive a Kalman filter based upon fitting coefficients to analytical mode shapes might provide a better means to animate the wind tunnel data.

Christhilf, David M.↗

Flow Simulation in Secondary Flow Passages of a Rocket Engine Turbopump

This paper presents application of a Generalized Fluid System Simulation Program (GFSSP) to model fluid flow in a very complex secondary flow circuit of a rocket engine turbopump, SIMPLEX. SIMPLEX was a low cost turbopump designed, manufactured and tested to demonstrate the ability to reduce the overall cost and design cycle time of turbomachinery. GFSSP is a general purpose computer program for analyzing flowrate, pressure, temperature and concentration distribution in a complex flow network. The program employs a finite volume formulation of mass, momentum and energy conservation equations in conjunction with thermodynamic equation of state of a real fluid. The secondary flow passages modeled include flow between the impeller shroud and housing, impeller back face and housing, flow through labyrinth seal and bearing, return line flow to inducer and flow adjacent to front and back face of the turbine. Axial load on the bearing are calculated from the predicted pressure on all axial faces of the rotor. The predicted pressure and temperature distributions compared well with the test data.

Schallhorn, Paul↗

Observations of the Galactic center 511 keV line

A review of observations of the positron annihilation 511 keV line from the Galactic center and plane is presented. Emphasis is given to the new data from balloon observations in 1988 and 1989. The positron annihilation source in the direction of the center was found to be turned on again in 1988 October after being observed in a quiescent state since the early 1980s. There is evidence for variability between May and October in 1988. The new observations give the first data in which the line is spectrally resolved and in which the Galactic center and plane components of the annihilation radiation are independently measured. These data support the two-component model of the emission with a variable point source near the center and a steady-state source distributed along the galactic plane. Comparing measurements of narrow and wide field instruments in the 1980s gives a flux of about 8 x 10 exp -4 photons/sq cm/s for the point source in its high state and a flux of about 1.2 x 10 exp-3 photons/sq cm/s/rad for the galactic plane component with a relatively flat distribution over the central radian. The line width for the point source component is about 3 keV FWHM.

Gehrels, Neil↗

Coronal activity in F-, G-, and K-type stars. III - The coronal differential emission measure distribution of Capella, Sigma-squared CrB, and Procyon

EXOSAT soft X-ray spectra of three binary systems of cool stars are analyzed: Capella (G6 III + F9 III), Sigma-squared CrB (F8 V + G1 V), and Procyon (F5 IV-V + DF). The EXOSAT transmission grating spectrometer permits the study of individual spectral lines and line complexes between 10 and 200 A with approximately 3 A resolution. First it is demonstrated that the spectra can be described reasonably well by a two-temperature model corona. Then the assumption that only two temperatures exist in the stellar coronas is relaxed and differential emission measure distributions are derived from the three spectra. The results from the multithermal modeling are consistent with those of the two-temperature models: emission from the coronas of each of the three stars is dominated by plasma in two relative narrow temperature intervals. These intervals are centered on 5 MK and 25 MK in the cases of Capella and Sigma-squared CrB, and 0.6 MK and 3 MK in the case of Procyon. The implications of the results for the structure of stellar coronas are briefly discussed.

Lemen, J. R.↗

Velocity distributions of hydrogen atoms and hydroxyl radicals produced through solar photodissociation of water

The velocity distributions of H and OH fragments produced through solar photodissociation of gaseous H2O molecules under collisionless conditions are presented. The calculations are carried out using: the most recently available absolute partial cross sections for the production of H and OH through photodissociation of H2O from its absorption onset at 1860 A down to 500 A; the newly available vibrational and rotational energy distributions of both the excited and ground state OH photofragments; the calculated cross sections for the total dissociation processes; and the integrated solar flux in 10 A increments from 500 to 1860 A in the continuum regions and the specific wavelength and flux at the bright solar lines. The calculated results show that the H atoms and the OH radicals produced exhibit multiple velocity groups. Since most current cometary modeling uses a single velocity of 20 km/sec associated with the photodissociation of H2O, the present results may be useful in interpreting the many peaks observed in the velocity distributions of the H Lyman alpha and H alpha of comets.

Wu, C. Y. R.↗

Power Management and Distribution (PMAD) Model Development: Final Report

Power management and distribution (PMAD) models were developed in the early 1990's to model candidate architectures for various Space Exploration Initiative (SEI) missions. They were used to generate "ballpark" component mass estimates to support conceptual PMAD system design studies. The initial set of models was provided to NASA Lewis Research Center (since renamed Glenn Research Center) in 1992. They were developed to estimate the characteristics of power conditioning components predicted to be available in the 2005 timeframe. Early 90's component and device designs and material technologies were projected forward to the 2005 timeframe, and algorithms reflecting those design and material improvements were incorporated into the models to generate mass, volume, and efficiency estimates for circa 2005 components. The models are about ten years old now and NASA GRC requested a review of them to determine if they should be updated to bring them into agreement with current performance projections or to incorporate unforeseen design or technology advances. This report documents the results of this review and the updated power conditioning models and new transmission line models generated to estimate post 2005 PMAD system masses and sizes. This effort continues the expansion and enhancement of a library of PMAD models developed to allow system designers to assess future power system architectures and distribution techniques quickly and consistently.

Metcalf, Kenneth J.↗

Computational procedure for three-dimensional boundary layers on aircraft and aerospace vehicles

An implicit numerical procedure is developed to solve the full three-dimensional laminar, boundary layer equations over realistic aircraft and spacecraft configurations. This procedure utilizes splined functions in the direction normal to the surface and finite differences in the cross flow direction. Calculation of off-pitch plane attachment and detachment lines can be calculated. The solution procedure permits the incorporation of a wide variety of turbulent models and boundary conditions including; entropy layer procedures, specified surface temperatures or heat flux distributions, surface catalysis, mass addition, and the coupling to both three-dimensional inviscid codes and surface ablation codes. In addition, reasonable computing times are obtained.

Kendall, R. M.↗

The relationship between the galactic matter distribution, cosmic-ray dynamics, and gamma-ray production

The concept that cosmic-ray density is related to the matter to which cosmic rays are dynamically coupled through magnetic fields on the scale of galactic arm segments is considered with specific reference to gamma-ray astronomy. A model of the galactic-matter and cosmic-ray distributions is developed on the basis of 21-cm radio surveys and recent observations of the 2.6-mm CO emission line by assuming that cosmic rays are galactic in origin, their column density is proportional to the total interstellar-gas column density, their scale height is considerably larger than that of the matter, and the Galaxy is a spiral with an arm/interarm density ratio of about 3 to 1. It is found that there is a good correlation between the observed gamma-ray intensity and that predicted on the basis of essentially complete coupling of cosmic rays to the best estimate of atomic and molecular hydrogen in the Galaxy. Individual maxima observed in gamma-radiation from the central region of the Galaxy are shown to be well correlated with those predicted to result from certain spiral-arm tangents if all the matter is assumed to be modulated in a particular spiral-arm segment pattern.

Kniffen, D. A.↗

Broad-line variability in NGC 5548

The possible explanations for the variability behavior of the He II 4686A and H-beta lines in the Seyfert galaxy NGC 5548 as observed by Peterson and Ferland (1986) are discussed. The range of variability expected from these lines is explored according to the standard models for broad-line clouds, assuming changes in the values of various of the clouds' defining parameters. When compared with model predictions, the observed line variability suggests the existence of a strong, variable EUV component of the ionizing spectrum and of two populations of clouds which differ in their velocity distributions and in their response to continuum variations.

Kallman, T.↗

Photoelectric return-stroke velocity and peak current estimates in natural and triggered lightning

Two-dimensional photoelectric return stroke velocities from 130 strokes are presented, including 86 negative natural, 41 negative triggered, one positive triggered, and two positive natural return strokes. For strokes starting near the ground and exceeding 500 m in length, the average velocity is 1.3 + or - 0.3 X 10 to the 8th m/s for natural return strokes and 1.2 + or - 0.3 X 10 to the 8th m/s for triggered return strokes. For strokes with lengths less than 500 m, the average velocities are slightly higher. Using the transmission line model (TLM), the shortest segment one-dimensional return stroke velocity, and either the maximum or plateau electric field, it is shown that natural strokes have a peak current distribution that is lognormal with a median value of 16 kA (maximum E) or 12 kA (plateau E). Triggered lightning has a medium peak current value of 21 kA (maximum E) or 15 kA (plateau E). Correlations are found between TLM peak currents and velocities for triggered and natural subsequent return strokes, but not between TLM peak currents and natural first return stroke velocities.

Mach, Douglas M.↗