Search NASA⌕ Search

SEARCH · Search NASA

Results for “dynamical model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Comments on 'The magnetic field of Mars - Implications from gas dynamic modeling' by C. T. Russell, J. C. Luhmann, J. R. Spreiter, and S. S. Stahara

The Russell et al. (1984) claim that gas dynamic modeling allows a determination of interplanetary and magnetosheath field configurations resembling the Mars 3 magnetic field observations during the January 21, 1972 encounter, and their proposal of a draped magnetic field pattern model for these data, are presently disputed. Extensive use is made of Martian magnetic field analyses undertaken by Dolginov between 1973 and 1984, which are held to prove the existence of an intrinsic Martian magnetic field. Russell replies that the Russell et al. analysis of the variation in the Mars 2, 3, and 5 data suggests the presence of both zero-level and sensor polarity errors in these data. The rejection of an intrinsic Martian magnetic field is accordingly reaffirmed, pending the availability of less ambiguous data.

Dolginov, Sh. SH.↗

Dynamic Modeling of Aerobic Growth of Shewanella oneidensis. Predicting Triauxic Growth, Flux Distributions and Energy Requirement for Growth

A model-based analysis is conducted to investigate metabolism of Shewanella oneidensis MR-1 strain in aerobic batch culture, which exhibits an intriguing growth pattern by sequentially consuming substrate (i.e., lactate) and by-products (i.e., pyruvate and acetate). A general protocol is presented for developing a detailed network-based dynamic model for S. oneidensis based on the Lumped Hybrid Cybernetic Model (LHCM) framework. The L-HCM, although developed from only limited data, is shown to accurately reproduce exacting dynamic metabolic shifts, and provide reasonable estimates of energy requirement for growth. Flux distributions in S. oneidensis predicted by the L-HCM compare very favorably with 13C-metabolic flux analysis results reported in the literature. Predictive accuracy is enhanced by incorporating measurements of only a few intracellular fluxes, in addition to extracellular metabolites. The L-HCM developed here for S. oneidensis is consequently a promising tool for the analysis of intracellular flux distribution and metabolic engineering.

ATP requirement for growth↗

When the Jeans Do Not Fit: How Stellar Feedback Drives Stellar Kinematics and Complicates Dynamical Modeling in Low-mass Galaxies

In low-mass galaxies, stellar feedback can drive gas outflows that generate non-equilibrium fluctuations in the gravitational potential. Using cosmological zoom-in baryonic simulations from the Feedback in Realistic Environments project, we investigate how these fluctuations affect stellar kinematics and the reliability of Jeans dynamical modeling in low-mass galaxies. We find that stellar velocity dispersion and anisotropy profiles fluctuate significantly over the course of galaxies’ starburst cycles. We therefore predict an observable correlation between star formation rate and stellar kinematics: dwarf galaxies with higher recent star formation rates should have systemically higher stellar velocity dispersions. This prediction provides an observational test of the role of stellar feedback in regulating both stellar and dark-matter densities in dwarf galaxies. We find that Jeans modeling, which treats galaxies as virialized systems in dynamical equilibrium, overestimates a galaxy’s dynamical mass during periods of post-starburst gas outflow and underestimates it during periods of net inflow. Short-timescale potential fluctuations lead to typical errors of ∼20% in dynamical mass estimates, even if full three-dimensional stellar kinematics—including the orbital anisotropy—are known exactly. When orbital anisotropy is not known a priori, typical mass errors arising from non-equilibrium fluctuations in the potential are larger than those arising from the mass-anisotropy degeneracy. However, Jeans modeling alone cannot reliably constrain the orbital anisotropy, and problematically, it often favors anisotropy models that do not reflect the true profile. If galaxies completely lose their gas and cease forming stars, fluctuations in the potential subside, and Jeans modeling becomes much more reliable.

79 ASTRONOMY AND ASTROPHYSICS↗

DYNAMICAL MODELS FOR NGC 6503 USING A MARKOV CHAIN MONTE CARLO TECHNIQUE

We use Bayesian statistics and Markov chain Monte Carlo (MCMC) techniques to construct dynamical models for the spiral galaxy NGC 6503. The constraints include surface brightness (SB) profiles which display a Freeman Type II structure; H I and ionized gas rotation curves; the stellar rotation, which is nearly coincident with the ionized gas curve; and the line of sight stellar dispersion, which displays a {sigma}-drop at the center. The galaxy models consist of a Sersic bulge, an exponential disk with an optional inner truncation and a cosmologically motivated dark halo. The Bayesian/MCMC technique yields the joint posterior probability distribution function for the input parameters, allowing constraints on model parameters such as the halo cusp strength, structural parameters for the disk and bulge, and mass-to-light ratios. We examine several interpretations of the data: the Type II SB profile may be due to dust extinction, to an inner truncated disk, or to a ring of bright stars, and we test separate fits to the gas and stellar rotation curves to determine if the gas traces the gravitational potential. We test each of these scenarios for bar stability, ruling out dust extinction. We also find that the gas likely does not trace the gravitational potential, since the predicted stellar rotation curve, which includes asymmetric drift, is then inconsistent with the observed stellar rotation curve. The disk is well fit by an inner-truncated profile, but the possibility of ring formation by a bar to reproduce the Type II profile is also a realistic model. We further find that the halo must have a cuspy profile with {gamma} {approx}> 1; the bulge has a lower M/L than the disk, suggesting a star-forming component in the center of the galaxy; and the bulge, as expected for this late-type galaxy, has a low Sersic index with n{sub b} {approx} 1-2, suggesting a formation history dominated by secular evolution.

79 ASTRONOMY AND ASTROPHYSICS↗

Parameterization of IR cooling in a middle atmosphere dynamics model. I - Effects on the zonally averaged circulation

A computationally efficient two-stream parameterization of IR cooling is developed for a middle atmosphere dynamics model. The parameterization combines the monochromatic feature of an emissivity formulation with the computational simplicity of a single spatial integral to evaluate the monochromatic transfer equation. Calculations show strong radiative control of the mesopause region and the need for substantial deceleration of the mean zonal winds. Calculated temperatures show good agreement in the summer hemisphere where planetary wave activity is negligible, but in the polar night of the winter hemisphere they are about 30 K too cold, which suggests planetary wave heating must make up the deficit. With observed ozone densities, globally averaged radiative equilibrium temperatures in the 65-75 km region are too cold and an additional heat source about 1 K/day is required.

Apruzese, J. P.↗

Dynamical model of φ meson photoproduction on the nucleon and 4 He

We investigate φ meson photoproduction on the nucleon and the 4 He targets within a dynamical model approach based on a Hamiltonian which describes the production mechanisms by the Pomeron-exchange, meson-exchanges, φ radiations, and nucleon resonance excitations mechanisms. The final φN interactions are included being described by the gluon-exchange, direct φN couplings, and the box-diagrams arising from the couplings with πN, ρN, KΛ, and KΣ channels. The parameters of the Hamiltonian are determined by the experimental data of γp → φp from the CLAS Collaboration. The resulting Hamiltonian is then used to predict the coherent φ-meson production on the 4 He targets by using the distorted-wave impulse approximation. For the proton target, the final φN rescattering effects, as required by the unitarity condition, are found to be very weak, which supports the earlier calculations in the literature. For the 4 He targets, the predicted differential cross sections are in good agreement with the data obtained by the LEPS Collaboration. Furthermore, the role of each mechanism in this reaction is discussed and predictions for a wide range of scattering angles are presented, which can be tested in future experiments.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Simple dynamical models of Neptune's Great Dark Spot

The large amplitude oscillations of the shape of Neptune's Great Dark Spot are well reproduced by simple dynamical models of an isolated vortex embedded in a background shear flow. From the time series of the aspect ratio and inclination of the vortex values are estimated for the background shear and the mean vorticity of the Great Dark Spot, and a lower bound is placed on the value of the Rossby deformation radius. These models imply the existence of a planetary-scale zone of deterministic chaotic advection in the atmosphere of Neptune.

Polivani, L. M.↗

Fully Debiased Meteor Radiants and Speeds and their Constraints on Dynamical Models

The sporadic meteoroid environment displays distinct groupings of meteoroid orbits that are referred to as the sporadic "sources." These sources are linked to different dynamical classes of parent bodies; for instance, the so-called helion and anti-helion sources are attributed to Jupiter-family comets. Because the sporadic sources have different orbital distributions and thus encounter the Earth's atmosphere at different speeds, meteor observing biases tend to obscure the relative contributions of the sporadic sources to the overall meteoroid flux. We present a de-biased map of both meteoroid radiants and speeds and compare this map with two meteoroid dynamical models: Jones (2004) and Wiegert et al. (2009).

Althea Valkyrie Moorhead↗

Fully debiased meteor radiants and speeds and their constraints on dynamical models

The sporadic meteoroid environment displays distinct groupings of meteoroid orbits that are referred to as the sporadic "sources." These sources are linked to different dynamical classes of parent bodies; for instance, the so-called helion and anti-helion sources are attributed to Jupiter-family comets. Because the sporadic sources have different orbital distributions and thus encounter the Earth's atmosphere at different speeds, meteor observing biases tend to obscure the relative contributions of the sporadic sources to the overall meteoroid flux. We present a de-biased map of both meteoroid radiants and speeds and compare this map with two meteoroid dynamical models: Jones (2004) and Wiegert et al. (2009).

Althea Moorhead↗

Preliminary results from dynamic model tests of an air cushion landing system.

Experimental study of the behavior of an air cushion landing system on 1:10 and 1:4-scale dynamic models of the CC-115 aircraft over a range of initial impact, on a smooth hard surface of fiberglass-coated plywood, on calm water, and on rough water with waves 5 ft high and 100 ft crest-to-crest wide. The performance was satisfactory with the 1:10 scale model on hard surfaces and calm water and was less certain, requiring more tests, on rough water, while substantial pitching oscillations were observed in tests on the 1:4 scale model.

Leland, T. J. W.↗

A revised dynamic otolith model.

Dynamic otolith model based on input-output experiments, including static component to permit steady output to acceleration or sustained tilt

Meiry, J. L.↗

Dynamic Model Investigation of Water Pressures and Accelerations Encountered During Landings of the Apollo Spacecraft

An experimental investigation was made to determine impact water pressures, accelerations, and landing dynamics of a 1/4-scale dynamic model of the command module of the Apollo spacecraft. A scaled-stiffness aft heat shield was used on the model to simulate the structural deflections of the full-scale heat shield. Tests were made on water to obtain impact pressure data at a simulated parachute letdown (vertical) velocity component of approximately 30 ft/sec (9.1 m/sec) full scale. Additional tests were made on water, sand, and hard clay-gravel landing surfaces at simulated vertical velocity components of 23 ft/sec (7.0 m/sec) full scale. Horizontal velocity components investigated ranged from 0 to 50 ft/sec (15 m/sec) full scale and the pitch attitudes ranged from -40 degrees to 29 degrees. Roll attitudes were O degrees, 90 degrees, and 180 degrees, and the yaw attitude was 0 degrees.

Tests↗

Development of a Dynamic Model and Control System for Load-Following Studies of Supercritical Pulverized Coal Power Plants

Traditional energy production plants are increasingly forced to cycle their load and operate under low-load conditions in response to growth in intermittent renewable generation. A plant-wide dynamic model of a supercritical pulverized coal (SCPC) power plant has been developed in the Aspen Plus Dynamics® (APD) software environment and the impact of advanced control strategies on the transient responses of the key variables to load-following operation and disturbances can be studied. Models of various key unit operations, such as the steam turbine, are developed in Aspen Custom Modeler® (ACM) and integrated in the APD environment. A coordinated control system (CCS) is developed above the regulatory control layer. Three control configurations are evaluated for the control of the main steam; the reheat steam temperature is also controlled. For studying servo control performance of the CCS, the load is decreased from 100% to 40% at a ramp rate of 3% load per min. The impact of a disturbance due to a change in the coal feed composition is also studied. The CCS is found to yield satisfactory performance for both servo control and disturbance rejection.

20 FOSSIL-FUELED POWER PLANTS↗

A 3D dynamic model to assess the impacts of low-mode asymmetry, aneurysms and mix-induced radiative loss on capsule performance across inertial confinement fusion platforms

A simple 3D dynamic model for inertial confinement fusion (ICF) implosions has been developed and used to assess the impacts of low-mode asymmetry, aneurysms and mix-induced radiative loss on capsule performance across ICF platforms. While benchmarked against radiation hydrodynamics simulations, this model benefits from simplicity and speed to allow rapid assessment of possible sources of degradation as well as to help build intuition about the relative importance of different effects. Degradations in the model result from 3D pr areal density perturbations that grow under deceleration from a radial stagnation flow, resulting in reduced convergence, stagnation pressure and temperature. When available, experimental data are used as input to seed 3D perturbations in the model so that the actual observed hotspot and shell areal density asymmetry at stagnation, as well as the radiation loss increase from mix impurities, are accurately reproduced. This model is applied to a broad set of implosion data from the NIF and Omega, including examples from both indirect drive and direct drive. The model matches most experimental observables and explains major performance degradation mechanisms which can result in 30–100-fold reductions in yield. We investigate a modified ignition criterion that accounts for the increase in expansion pdV work, due to the presence of 3D pr perturbations and loss-of-confinement in thin regions of the shell.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Parameterization of eddy sensible heat transports in a zonally averaged dynamic model of the atmosphere

A Charney-Branscome based parameterization has been tested as a way of representing the eddy sensible heat transports missing in a zonally averaged dynamic model (ZADM) of the atmosphere. The ZADM used is a zonally averaged version of a general circulation model (GCM). The parameterized transports in the ZADM are gaged against the corresponding fluxes explicitly simulated in the GCM, using the same zonally averaged boundary conditions in both models. The Charney-Branscome approach neglects stationary eddies and transient barotropic disturbances and relies on a set of simplifying assumptions, including the linear appoximation, to describe growing transient baroclinic eddies. Nevertheless, fairly satisfactory results are obtained when the parameterization is performed interactively with the model. Compared with noninteractive tests, a very efficient restoring feedback effect between the modeled zonal-mean climate and the parameterized meridional eddy transport is identified.

Genthon, Christophe↗

Incipient- and Developed-Spin and Recovery Characteristics of a Modern High-Speed Fighter Design with Low Aspect Ratio as Determined from Dynamic-Model Tests

Incipient- and developed-spin and recovery characteristics of a modern high-speed fighter design with low aspect ratio have been investigated by means of dynamic model tests. A 1/7-scale radio-controlled model was tested by means of drop tests from a helicopter. Several 1/25-scale models with various configuration changes were tested in the Langley 20-foot free-spinning tunnel. Model results indicated that generally it would be difficult to obtain a developed spin with a corresponding airplane and that either the airplane would recover of its own accord from any poststall motion or the poststall motion could be readily terminated by proper control technique. On occasion, however, the results indicated that if a post-stall motion were allowed to continue, a fully developed spin might be obtainable from which recovery could range from rapid to no recovery at all, even when optimum control technique was used. Satisfactory recoveries could be obtained with a proper-size tail parachute or strake, application of pitching-, rolling-, or yawing-moment rockets, or sufficient differential deflection of the horizontal tail.

Lee, Henry A.↗

THE M87 BLACK HOLE MASS FROM GAS-DYNAMICAL MODELS OF SPACE TELESCOPE IMAGING SPECTROGRAPH OBSERVATIONS

The supermassive black hole of M87 is one of the most massive black holes known and has been the subject of several stellar and gas-dynamical mass measurements; however, the most recent revision to the stellar-dynamical black hole mass measurement is a factor of about two larger than the previous gas-dynamical determinations. Here, we apply comprehensive gas-dynamical models that include the propagation of emission-line profiles through the telescope and spectrograph optics to new Space Telescope Imaging Spectrograph observations from the Hubble Space Telescope. Unlike the previous gas-dynamical studies of M87, we map out the complete kinematic structure of the emission-line disk within {approx}40 pc from the nucleus, and find that a small amount of velocity dispersion internal to the gas disk is required to match the observed line widths. We examine a scenario in which the intrinsic velocity dispersion provides dynamical support to the disk, and determine that the inferred black hole mass increases by only 6%. Incorporating this effect into the error budget, we ultimately measure a mass of M{sub BH}= (3.5{sup +0.9}{sub -0.7}) Multiplication-Sign 10{sup 9} M{sub sun} (68% confidence). Our gas-dynamical black hole mass continues to differ from the most recent stellar-dynamical mass by a factor of two, underscoring the need for carrying out more cross-checks between the two main black hole mass measurement methods.

79 ASTRONOMY AND ASTROPHYSICS↗

Computational Fluid Dynamics Modeling of a Supersonic Nozzle and Integration into a Variable Cycle Engine Model

This paper covers the development of an integrated nonlinear dynamic simulation for a variable cycle turbofan engine and nozzle that can be integrated with an overall vehicle Aero-Propulso-Servo-Elastic (APSE) model. A previously developed variable cycle turbofan engine model is used for this study and is enhanced here to include variable guide vanes allowing for operation across the supersonic flight regime. The primary focus of this study is to improve the fidelity of the model's thrust response by replacing the simple choked flow equation convergent-divergent nozzle model with a MacCormack method based quasi-1D model. The dynamic response of the nozzle model using the MacCormack method is verified by comparing it against a model of the nozzle using the conservation element/solution element method. A methodology is also presented for the integration of the MacCormack nozzle model with the variable cycle engine.

Thrust↗