Search NASA⌕ Search

SEARCH · Search NASA

Results for “eigenvalue analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

TH-AB-BRA-09: Stability Analysis of a Novel Dose Calculation Algorithm for MRI Guided Radiotherapy

Purpose: To determine the iterative deterministic solution stability of the Linear Boltzmann Transport Equation (LBTE) in the presence of magnetic fields. Methods: The LBTE with magnetic fields under investigation is derived using a discrete ordinates approach. The stability analysis is performed using analytical and numerical methods. Analytically, the spectral Fourier analysis is used to obtain the convergence rate of the source iteration procedures based on finding the largest eigenvalue of the iterative operator. This eigenvalue is a function of relevant physical parameters, such as magnetic field strength and material properties, and provides essential information about the domain of applicability required for clinically optimal parameter selection and maximum speed of convergence. The analytical results are reinforced by numerical simulations performed using the same discrete ordinates method in angle, and a discontinuous finite element spatial approach. Results: The spectral radius for the source iteration technique of the time independent transport equation with isotropic and anisotropic scattering centers inside infinite 3D medium is equal to the ratio of differential and total cross sections. The result is confirmed numerically by solving LBTE and is in full agreement with previously published results. The addition of magnetic field reveals that the convergence becomes dependent on the strength of magnetic field, the energy group discretization, and the order of anisotropic expansion. Conclusion: The source iteration technique for solving the LBTE with magnetic fields with the discrete ordinates method leads to divergent solutions in the limiting cases of small energy discretizations and high magnetic field strengths. Future investigations into non-stationary Krylov subspace techniques as an iterative solver will be performed as this has been shown to produce greater stability than source iteration. Furthermore, a stability analysis of a discontinuous finite element space-angle approach (which has been shown to provide the greatest stability) will also be investigated. Dr. B Gino Fallone is a co-founder and CEO of MagnetTx Oncology Solutions (under discussions to license Alberta bi-planar linac MR for commercialization)

60 APPLIED LIFE SCIENCES↗
NASA NTRS1992

A theoretical approach for analyzing the restabilization of wakes

A linear stability analysis provides the basis for an analysis of the effects of prescribed changes upon the global stability characteristics of a bluff body wake. The analysis is applied in particular to the problem of placing a small cylinder in the wake of a larger one in order to suppress the vortex street. A prediction of the alteration in the critical Reynolds number of the system as a function of the location of the second cylinder relative to the first is presented and is shown to compare favorably with experimental results. The effect upon shedding frequency is also considered. The approach relies on the solution of an adjoint eigenvalue problem and an inhomogeneous adjoint boundary value problem. These adjoint solutions are shown to be a key component in the analysis of a variety of wake control strategies.

Hill, D. C.↗
DOE OSTI2018

Symmetry and separability of the neutron diffusion equation

Separation of variables is one of the oldest techniques for solving certain classes of partial differential equations (PDEs). As is the case with many other solution techniques for differential equations, separation of variables may be codified within the broader framework of symmetry analysis. Though the separation of variables technique is frequently used in the nuclear engineering context with various equations describing neutron transport, its connection to the symmetries of those equations has not yet been thoroughly established. It is thus the purpose of this work to establish that connection using neutron diffusion as both an initial step toward analysis of more generally applicable equations, and as a connection to previous results in related problems. Using Lie group analysis, it is found that the traditional space-time separable solution of the neutron diffusion equation (featuring a single α-eigenvalue) corresponds to time translation and flux scaling symmetries. Additional solutions of this equation are also constructed using its broader symmetry set.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Material coherence from trajectories via Burau eigenanalysis of braids

In this paper, we provide a numerical tool to study a material’s coherence from a set of 2D Lagrangian trajectories sampling a dynamical system, i.e., from the motion of passive tracers. We show that eigenvectors of the Burau representation of a topological braid derived from the trajectories have levelsets corresponding to components of the Nielsen–Thurston decomposition of the dynamical system. One can thus detect and identify clusters of space–time trajectories corresponding to coherent regions of the dynamical system by solving an eigenvalue problem. Unlike previous methods, the scalable computational complexity of our braid-based approach allows the analysis of large amounts of trajectories.

36 MATERIALS SCIENCE↗
DOE OSTI2017

As-Loaded Criticality Margin Assessment of Dual-Purpose Canisters Using UNF-ST&DARDS

A novel assessment has been completed in this paper to determine the previously unquantified and uncredited criticality margin available in as-loaded commercial spent nuclear fuel (SNF) canisters. This assessment was performed as part of a broader effort to assess issues and uncertainties with storage, subsequent transportation, and final disposal of SNF canister systems. Detailed analyses crediting the burnup, initial enrichment, and postirradiation cooling time of actual SNF inventory were performed for 554 SNF canisters stored at 23 commercial reactor sites to determine realistic criticality safety margins. These detailed analyses were automated by the Used Nuclear Fuel-Storage, Transportation & Disposal Analysis Resource and Data System (UNF-ST&DARDS), a comprehensive, integrated data and analysis tool. Calculated, uncredited criticality margins (Δk eff ) with respect to the safety analysis results range from 0 to almost 0.30 Δk eff for normal storage and transportation cases. Calculated eigenvalues (k eff ) range from 0.72 to 1.11 assuming a degraded neutron absorber disposal condition, and they range from 0.94 to 1.20 assuming a degraded basket disposal condition. Calculations with NaCl present in the moderator (which is possible for certain disposal geologies) were used to demonstrate the possibility for subcriticality for degraded cases with a k eff above 0.98 with freshwater. The methods used to calculate k eff for the canisters analyzed in this work are discussed in detail. The results demonstrate that, for the majority of canisters analyzed here, significant uncredited safety margin is available that could be used to compensate for uncertainties in the SNF assembly and canister internal components. These uncertainties are associated with long-term storage and subsequent transportation and disposal. Results also suggest that the inherent margins associated with how canisters are loaded could support future changes in licensing SNF storage and transportation systems to directly or indirectly credit the margins associated with actual SNF characteristics. Finally, ongoing research continues to gather additional data to quantify uncredited safety margins for SNF canisters loaded at other nuclear reactor sites and to explore potential methods for applying this uncredited margin.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

A New Type of Weak Grid IBR Oscillations

This letter presents the discovery of a new type oscillations associated with inverter-based resources (IBRs) in weak grids. While typical weak grid oscillations become worse when the grid strength decreases and the power exporting level increases, this new type of oscillations appear when the grid becomes weaker and the power exporting level decreases. Electromagnetic transient (EMT) simulation results are presented, along with eigenvalue loci for a varying power. The notable signatures of such oscillations are also remarked. In further analysis, a feedback system consisting of two blocks is derived with one block associated with the phase-locked-loop (PLL) and the other associated with the rest of the system. Here, this feedback system quantitatively demonstrates why insufficient damping in the PLL may be an issue for stability. Open-loop analysis shows that a larger phase lag in angle tracking in the low-frequency range due to high power exporting level at the weak grid condition is beneficial to the open-loop poles introduced by the PLL. And this is the reason why such oscillations may appear when power is ramping down.

24 POWER TRANSMISSION AND DISTRIBUTION↗
NASA NTRS1995

Aeroelastic stability of wind turbine blade/aileron systems

Aeroelastic stability analyses have been performed for the MOD-5A blade/aileron system. Various configurations having different aileron torsional stiffness, mass unbalance, and control system damping have been investigated. The analysis was conducted using a code recently developed by the General Electric Company - AILSTAB. The code extracts eigenvalues for a three degree of freedom system, consisting of: (1) a blade flapwise mode; (2) a blade torsional mode; and (3) an aileron torsional mode. Mode shapes are supplied as input and the aileron can be specified over an arbitrary length of the blade span. Quasi-steady aerodynamic strip theory is used to compute aerodynamic derivatives of the wing-aileron combination as a function of spanwise position. Equations of motion are summarized herein. The program provides rotating blade stability boundaries for torsional divergence, classical flutter (bending/torsion) and wing/aileron flutter. It has been checked out against fixed-wing results published by Theodorsen and Garrick. The MOD-5A system is stable with respect to divergence and classical flutter for all practical rotor speeds. Aileron torsional stiffness must exceed a minimum critical value to prevent aileron flutter. The nominal control system stiffness greatly exceeds this minimum during normal operation. The basic system, however, is unstable for the case of a free (or floating) aileron. The instability can be removed either by the addition of torsional damping or mass-balancing the ailerons. The MOD-5A design was performed by the General Electric Company, Advanced Energy Program Department under Contract DEN3-153 with NASA Lewis Research Center and sponsored by the Department of Energy.

Strain, J. C.↗
NASA NTRS2003

Flutter and Divergence Analysis using the Generalized Aeroelastic Analysis Method

The Generalized Aeroelastic Analysis Method (GAAM) is applied to the analysis of three well-studied checkcases: restrained and unrestrained airfoil models, and a wing model. An eigenvalue iteration procedure is used for converging upon roots of the complex stability matrix. For the airfoil models, exact root loci are given which clearly illustrate the nature of the flutter and divergence instabilities. The singularities involved are enumerated, including an additional pole at the origin for the unrestrained airfoil case and the emergence of an additional pole on the positive real axis at the divergence speed for the restrained airfoil case. Inconsistencies and differences among published aeroelastic root loci and the new, exact results are discussed and resolved. The generalization of a Doublet Lattice Method computer code is described and the code is applied to the calculation of root loci for the wing model for incompressible and for subsonic flow conditions. The error introduced in the reduction of the singular integral equation underlying the unsteady lifting surface theory to a linear algebraic equation is discussed. Acknowledging this inherent error, the solutions of the algebraic equation by GAAM are termed 'exact.' The singularities of the problem are discussed and exponential series approximations used in the evaluation of the kernel function shown to introduce a dense collection of poles and zeroes on the negative real axis. Again, inconsistencies and differences among published aeroelastic root loci and the new 'exact' results are discussed and resolved. In all cases, aeroelastic flutter and divergence speeds and frequencies are in good agreement with published results. The GAAM solution procedure allows complete control over Mach number, velocity, density, and complex frequency. Thus all points on the computed root loci can be matched-point, consistent solutions without recourse to complex mode tracking logic or dataset interpolation, as in the k and p-k solution methods.

Edwards, John W.↗
NASA NTRS2008

Derivation of Boundary Manikins: A Principal Component Analysis

When designing any human-system interface, it is critical to provide realistic anthropometry to properly represent how a person fits within a given space. This study aimed to identify a minimum number of boundary manikins or representative models of subjects anthropometry from a target population, which would realistically represent the population. The boundary manikin anthropometry was derived using, Principal Component Analysis (PCA). PCA is a statistical approach to reduce a multi-dimensional dataset using eigenvectors and eigenvalues. The measurements used in the PCA were identified as those measurements critical for suit and cockpit design. The PCA yielded a total of 26 manikins per gender, as well as their anthropometry from the target population. Reduction techniques were implemented to reduce this number further with a final result of 20 female and 22 male subjects. The anthropometry of the boundary manikins was then be used to create 3D digital models (to be discussed in subsequent papers) intended for use by designers to test components of their space suit design, to verify that the requirements specified in the Human Systems Integration Requirements (HSIR) document are met. The end-goal is to allow for designers to generate suits which accommodate the diverse anthropometry of the user population.

Young, Karen↗
NASA NTRS2008

Generation of Boundary Manikin Anthropometry

The purpose of this study was to develop 3D digital boundary manikins that are representative of the anthropometry of a unique population. These digital manikins can be used by designers to verify and validate that the components of the spacesuit design satisfy the requirements specified in the Human Systems Integration Requirements (HSIR) document. Currently, the HSIR requires the suit to accommodate the 1st percentile American female to the 99th percentile American male. The manikin anthropometry was derived using two methods: Principal Component Analysis (PCA) and Whole Body Posture Based Analysis (WBPBA). PCA is a statistical method for reducing a multidimensional data set by using eigenvectors and eigenvalues. The goal is to create a reduced data set that encapsulates the majority of the variation in the population. WBPBA is a multivariate analytical approach that was developed by the Anthropometry and Biomechanics Facility (ABF) to identify the extremes of the population for a given body posture. WBPBA is a simulation-based method that finds extremes in a population based on anthropometry and posture whereas PCA is based solely on anthropometry. Both methods yield a list of subjects and their anthropometry from the target population; PCA resulted in 20 female and 22 male subjects anthropometry and WBPBA resulted in 7 subjects' anthropometry representing the extreme subjects in the target population. The subjects anthropometry is then used to 'morph' a baseline digital scan of a person with the same body type to create a 3D digital model that can be used as a tool for designers, the details of which will be discussed in subsequent papers.

Young, Karen S.↗
DOE OSTI2023

Fault Detection via Occupation Kernel Principal Component Analysis

Reliable operation of automatic systems is heavily dependent on the ability to detect faults in the underlying dynamics. While traditional model-based methods have been widely used for fault detection, data-driven approaches have garnered increasing attention due to their ease of deployment and minimal need for expert knowledge. In this letter, we present a novel principal component analysis (PCA) method that uses occupation kernels. Occupation kernels result in feature maps that are tailored to the measured data, have inherent noise-robustness due to the use of integration, and can utilize irregularly sampled system trajectories of variable lengths for PCA. The occupation kernel PCA method is used to develop a reconstruction error approach to fault detection and its efficacy is validated using numerical simulations.

42 ENGINEERING↗
NASA NTRS2011

Ares I-X In-Flight Modal Identification

Operational modal analysis is a procedure that allows the extraction of modal parameters of a structure in its operating environment. It is based on the idealized premise that input to the structure is white noise. In some cases, when free decay responses are corrupted by unmeasured random disturbances, the response data can be processed into cross-correlation functions that approximate free decay responses. Modal parameters can be computed from these functions by time domain identification methods such as the Eigenvalue Realization Algorithm (ERA). The extracted modal parameters have the same characteristics as impulse response functions of the original system. Operational modal analysis is performed on Ares I-X in-flight data. Since the dynamic system is not stationary due to propellant mass loss, modal identification is only possible by analyzing the system as a series of linearized models over short periods of time via a sliding time-window of short time intervals. A time-domain zooming technique was also employed to enhance the modal parameter extraction. Results of this study demonstrate that free-decay time domain modal identification methods can be successfully employed for in-flight launch vehicle modal extraction.

Bartkowicz, Theodore J.↗
NASA NTRS1990

A code for linear stability analysis

A new spectral code, Linear.x, has been written in FORTRAN 77 for the analysis of the linear stability of some basic state. While being generic and unrelated to any particular physical problem, the code provides for various common tasks, including global (eigenvalue spectra), local (single eigenvalues and eigenfunctions), table (one-dimensional and multidimensional tables of eigenvalues), curve (curves in parameter space), and others. A specific problem can be defined as a set of files some of which are included at compile time, while definitions, tasks, and parameters are read during run time. The code is currently used for the stability analysis of compressible flows.

Herbert, Thorwald↗
NASA NTRS1987

Approximations to eigenvalues of modified general matrices

The reanalysis of non-self-adjoint dynamic models is computationally very expensive in design optimization applications. This paper describes several approximations that can be applied to eigenvalues of non-hermitian matrices to reduce that computational cost. Approximations based on eigenvalue derivatives, generalized Rayleigh quotient and the trace theorem are presented and their accuracy and computational cost are estimated. The accuracy and cost estimates are verified by applying the approximations to random matrices and matrices arising in flutter analysis of compressor blades. Recommendations are made for selection of the best approximation when the derivatives are available and when they are not. In particular, it is concluded that the quadratic approximation for eigenvalues should never be used as higher order approximations are always more accurate as well as more efficient.

Murthy, Durbha V.↗
DOE OSTI2020

Steady detonation propagation in thin channels with strong confinement

We examine asymptotically the dynamics of two-dimensional, steady detonation wave propagation and failure for a strongly confined high explosive (HE), in which the width of the explosive is small relative to the reaction zone length. An energy balance equation is derived, which shows how the longitudinal acceleration of subsonic flow behind the detonation shock is influenced both by chemical reaction and by the effects of HE boundary streamline deflection, specifically via the induced rate of change of mass flux through the detonation wave. The latter serves to either counteract or reinforce the acceleration of longitudinal flow, depending on the sign of the gradient of the boundary streamline deflection at the detonation shock. The analysis is valid for general equations of state and chemical reaction rates in the HE. The asymptotically derived form of the energy equation represents an eigenvalue problem for the determination of the steady detonation propagation speed, solved via a shooting method. We explore specific results for ideal and stiffened equations of state, along with a pressure-dependent reaction rate for which changes in the pressure exponent and reaction order are also studied. We consider the influences of both straight and curved HE boundary streamline shapes. The asymptotic analysis reveals significant physical insights into how detonation propagation and failure are affected by strong confinement.

42 ENGINEERING↗
DOE OSTI2022

Why it is Unfortunate that Linear Machine Learning “Works” so well in Electromechanical Switching of Ferroelectric Thin Films

Machine learning (ML) is relied on for materials spectroscopy. It is challenging to make ML models fail because statistical correlations can mimic the physics without causality. Here, using a benchmark band-excitation piezoresponse force microscopy polarization spectroscopy (BEPS) dataset the pitfalls of the so-called “better”, “faster”, and “less-biased” ML of electromechanical switching are demonstrated and overcome. Using a toy and real experimental dataset, it is demonstrated how linear nontemporal ML methods result in physically reasonable embedding (eigenvalues) while producing nonsensical eigenvectors and generated spectra, promoting misleading interpretations. A new method of unsupervised multimodal hyperspectral analysis of BEPS is demonstrated using long-short-term memory (LSTM) β-variational autoencoders (β-VAEs) . By including LSTM neurons, the ordinal nature of ferroelectric switching is considered. Further, to improve the interpretability of the latent space, a variational Kullback–Leibler-divergency regularization is imposed . Finally, regularization scheduling of β as a disentanglement metric is leveraged to reduce user bias. Combining these experiment-inspired modifications enables the automated detection of ferroelectric switching mechanisms, including a complex two-step, three-state one. Ultimately, this work provides a robust ML method for the rapid discovery of electromechanical switching mechanisms in ferroelectrics and is applicable to other multimodal hyperspectral materials spectroscopies.

36 MATERIALS SCIENCE↗
NASA NTRS1971

Modal analysis computer program package

Modal analysis computer program package for finding frequencies and mode shapes of any linear discrete system governed by generalized eigenvalue equation

Mather, D. L.↗
NASA NTRS1974

On the use of first order rotor dynamics in multiblade coordinates

This paper is directed to the question of how to represent most efficiently rotor/body coupling in a linear flight dynamics analysis. Rigid body pitch, roll and vertical motions are considered for the rotor/body coupling studies. Flapping stability limits, eigenvalues, transient responses to control step inputs, to step gusts and to random gusts are determined for a hypothetical hingeless compound helicopter operating up to .8 advance ratio. Data are obtained for the basic helicopter and for the craft with two simple control feedback systems. While complete periodic system modeling is necessary for determining flapping stability limits and vibrations, constant system modeling using first order dynamics in each of the multiblade rotor coordinates was found to be adequate for rotor-craft stability and response computations.

Hohenemser, K. H.↗