Search NASA⌕ Search

SEARCH · Search NASA

Results for “entrainment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Nitric oxide formation in gas turbine engines: A theoretical and experimental study

A modified Zeldovich kinetic scheme was used to predict nitric oxide formation in the burned gases. Nonuniformities in fuel-air ratio in the primary zone were accounted for by a distribution of fuel-air ratios. This was followed by one or more dilution zones in which a Monte Carlo calculation was employed to follow the mixing and dilution processes. Predictions of NOX emissions were compared with various available experimental data, and satisfactory agreement was achieved. In particular, the model is applied to the NASA swirl-can modular combustor. The operating characteristics of this combustor which can be inferred from the modeling predictions are described. Parametric studies are presented which examine the influence of the modeling parameters on the NOX emission level. A series of flow visualization experiments demonstrates the fuel droplet breakup and turbulent recirculation processes. A tracer experiment quantitatively follows the jets from the swirler as they move downstream and entrain surrounding gases. Techniques were developed for calculating both fuel-air ratio and degree of nonuniformity from measurements of CO2, CO, O2, and hydrocarbons. A burning experiment made use of these techniques to map out the flow field in terms of local equivalence ratio and mixture nonuniformity.

Mikus, T.↗

Theoretical predictions of jet interaction effects for USB and OWB configurations

A wing jet interaction theory is presented for predicting the aerodynamic characteristics of upper surface blowing and over wing blowing configurations. For the latter configurations, a new jet entrainment theory is developed. Comparison of predicted results with some available data showed good agreement. Some applications of the theory are also presented.

Lan, C. E.↗

Boundary-layer separation on isolated boattail nozzles

An angle of attack of 0 deg was investigated in the Langley 16 foot transonic tunnel at free-stream Mach numbers from 0.40 to 0.95 to study the phenomenon of separated flow on a series of circular-arc afterbodies. Both high-pressure air and solid circular cylinders with the cylinder diameter equal to the nozzle-exit diameter were used to simulate jet exhausts. The results indicate that boundary-layer separation is most extensive on steep boattails at high Mach numbers. The jet total-pressure ratio changes (jet total pressure to free-stream static pressure) affected the extent of separation very little; however, comparison of the separation data obtained by using the two jet-simulation techniques indicate that entrainment associated with the presence of a jet had a significant effect on the extent of separation. The solid-simulator separation data were also used to evaluate the predictions of eight separation criteria.

Abeyounis, W. K.↗

Rocket exhaust ground cloud/atmospheric interactions

An attempt to identify and minimize the uncertainties and potential inaccuracies of the NASA Multilayer Diffusion Model (MDM) is performed using data from selected Titan 3 launches. The study is based on detailed parametric calculations using the MDM code and a comparative study of several other diffusion models, the NASA measurements, and the MDM. The results are discussed and evaluated. In addition, the physical/chemical processes taking place during the rocket cloud rise are analyzed. The exhaust properties and the deluge water effects are evaluated. A time-dependent model for two aerosol coagulations is developed and documented. Calculations using this model for dry deposition during cloud rise are made. A simple model for calculating physical properties such as temperature and air mass entrainment during cloud rise is also developed and incorporated with the aerosol model.

Hwang, B.↗

A visual investigation of turbulence in stagnation flow about a circular cylinder

A visual investigation of turbulence in stagnation flow around a circular cylinder was carried out in order to gain a physical insight into the model advocated by the corticity-amplification theory. Motion pictures were taken from three different viewpoints, and a frame by frame examination of selected movie strips was conducted. Qualitative and quantitative analyses of the flow events focused on tracing the temporal and spatial evolution of a cross-vortex tube outlined by the entrained smoke filaments. The visualization supplied evidence verifying: (1) the selective stretching of cross-vortex tubes which is responsible for the amplification of cross vorticity and, hence, of streamwise turbulence; (2) the streamwise tilting of stretched cross-vortex tubes; (3) the existence of a coherent array of vortices near the stagnation zone; (4) the interaction of the amplified vorticity with the body laminar boundary layer; and, (5) the growth of a turbulent boundary layer.

Sadeh, W. Z.↗

Particle motion on Mars inferred from the Viking lander cameras

Data from Viking lander cameras indicate fine particle mobility on the surface of Mars such as: probable ventifacts, rock-associated raised streaks, and particulate drifts. Peak wind directions inferred from Chryse and Utopia are roughly equal, and are consistant with those inferred by orbiter photography. A 24 deg systematic offset between: (1) the direction of rock-associated streaks in the Viking I landing site, and (2) Mariner 9 and Viking observations of crater-associated streaks is consistant with a Coriolis acceleration of particles entrained by high-velocity winds during the production of crater-associated streaks. It is suggested that if a large fraction of collision impact energy goes into deformation, strain, and rupture, a preferential destruction of the most easily saltated grains and a depletion of 15-micron diameter grains will be observed. Investigations of particulates dumped on the landing grid suggest that major saltation events took place between sols 96 and 207, caused by winds of greater than 50 meters/sec normalized to the top of the boundary layer.

Sagan, C.↗

Environmental synchronizers of squirrel monkey circadian rhythms

Various temporal signals in the environment were tested to determine if they could synchronize the circadian timing system of the squirrel monkey (Saimiri sciureus). The influence of cycles of light and dark, eating and fasting, water availability and deprivation, warm and cool temperature, sound and quiet, and social interaction and isolation on the drinking and activity rhythms of unrestrained monkeys was examined. In the absence of other time cues, 24-hr cycles of each of these potential synchronizers were applied for up to 3 wk, and the periods of the monkey's circadian rhythms were examined. Only light-dark cycles and cycles of food availability were shown to be entraining agents, since they were effective in determining the period and phase of the rhythmic variables. In the presence of each of the other environmental cycles, the monkey's circadian rhythms exhibited free-running periods which were significantly different from 24 hr with all possible phase relationships between the rhythms and the environmental cycles being examined.

Sulzman, F. M.↗

Experimental study of the structure of isotropic turbulence with intermediate range of Reynolds number

The energetic isotropic turbulence generated by a waterfall of low head was found to be developed in part through the unstable two-phase flow of entrained air bubbles. The resulting turbulent field had a turbulent Reynolds number in excess of 20,000 and maintained a self-similar structure throughout the decay period studied. The present study may provide some insight into the structure of turbulence produced by breaking waves over the ocean.

Ling, S. C.↗

Comparison of synchronization of primate circadian rhythms by light and food

It is a well-documented fact that cycles of light and dark (LD) are the major entraining agent or 'zeitgeber' for circadian rhythms and that cycles of eating and fasting (EF) are capable of synchronizing a few circadian rhythms in the squirrel monkey. In this paper, by contrasting how these rhythms are timed by LD and EF cycles, the differential coupling to the oscillating system within adult male squirrel monkeys is examined. The variables measured are the rhythms of drinking, colonic temperature, and urinary potassium and water excretion. Attention is given to a comparison of the reproducibility of the averaged waveforms of the rhythms, the stability of the timing of a phase reference point, and the rate of resynchronization of these rhythms following an abrupt 8-hr phase delay in the zeitgeber. It is shown that the colonic temperature rhythm is more tightly controlled by LD than EF cycles, and that the drinking and urinary rhythms are more tightly coupled to EF than LD cycles.

Sulzman, F. M.↗

An improved analytical model of the separated region on nozzle boattails

A viscous flow calculation is formulated for modelling the effects of separated, reverse flow regions on nozzle afterbody pressures and drags at subsonic Mach numbers. A discriminating streamline approach is used. Effects of skin friction, axial pressure gradient, and nozzle jet entrainment on the separated discriminating streamline shape are included. The viscous flow calculation is coupled to a potential flow calculation. The combined analysis is found to accurately predict both the magnitude of the measured afterbody pressures and drag, and also their variation with Reynolds number, Mach number and afterbody shape.

Presz, W. M., Jr.↗

Upgraded viscous flow analysis of multielement airfoils

A description of an improved version of the NASA/Lockheed multielement airfoil analysis computer program is presented. The improvements include several major modifications of the aerodynamic model as well as substantial changes of the computer code. The modifications of the aerodynamic model comprise the representation of the boundary layer and wake displacement effects with an equivalent source distribution, the prediction of wake parameters with Green's lag-entrainment method, the calculation of turbulent boundary layer separation with the method of Nash and Hicks, the estimation of the onset of confluent boundary layer separation with a modified form of Goradia's method, and the prediction of profile drag with the formula of Squire and Young. The paper further describes the modifications of the computer program for which the structured approach to computer software development was employed. Important aspects of the structured program development such as the functional decomposition of the aerodynamic theory and its numerical implementation, the analysis of the data flow within the code, and the application of a pseudo code are discussed.

Brune, G. W.↗

Calculation of the planar supercritical flow over a NASA supercritical profile

An unsteady finite difference procedure was used to calculate the steady inviscid flow over an 11% thickness ratio NASA supercritical profile of LWP 505 at M sub infinity = 0.80 and alpha = 0. An attempt is made to include the viscous effects using a modified form of Head's entrainment method to calculate the turbulent boundary layer. The attempt to predict the viscous effects using the compressible form of Head's integral method with a modified auxiliary equation for the form factors was unsatisfactory. Though a reasonably separation bubble was established on the lower surface, a grossly exaggerated displacement effect resulted downstream of the shock on the upper surface. There clearly is substantial further effort required to evolve a satisfactory boundary layer procedure, which must then be coupled in a still unproven manner with the inviscid procedure.

Yoshihara, H.↗

Analysis of some aerodynamic characteristics due to wing-jet interaction

The results of two separate theoretical investigations are presented. A program was used which is capable of predicting the aerodynamic characteristics of both upper-surface blowing (USB) and over-wing blowing (OWB) configurations. A theoretical analysis of the effects of over-wing blowing jets on the induced drag of a 50 deg sweep back wing was developed. Experiments showed net drag reductions associated with the well known lift enhancement due to over-wing blowing. The mechanisms through which this drag reduction is brought about are presented. Both jet entrainment and the so called wing-jet interaction play important roles in this process. The effects of a rectangular upper-surface blowing jet were examined for a wide variety of planforms. The isolated effects of wing taper, sweep, and aspect ratio variations on the incremental lift due to blowing are presented. The effects of wing taper ratio and sweep angle were found to be especially important parameters when considering the relative levels of incremental lift produced by an upper-surface blowing configuration.

Fillman, G. L.↗

Upgraded viscous flow analysis of multi-element airfoils

A description of an improved version of the NASA/Lockheed multi-element airfoil analysis computer program is presented. The improvements include several major modifications of the aerodynamic model as well as substantial changes of the computer code. The modifications of the aerodynamic model comprise the representation of the boundary layer and wake displacement effects with an equivalent source distribution, the prediction of wake parameters with Green's lag-entrainment method, the calculation of turbulent boundary layer separation with the method of Nash and Hicks, the estimation of the onset of confluent boundary layer separation with a modified form of Goradia's method, and the prediction of profile drag with the formula of Squire and Young. The modifications of the computer program for which the structured approach to computer software development was employed are also described. Important aspects of the structured program development such as the functional decomposition of the aerodynamic theory and its numerical implementation, the analysis of the data flow within the code, and the application of a pseudo code are discussed.

Brune, G. W.↗

A new flow model for highly separated airfoil flows at low speeds

An analytical model for separated airfoil flows is presented which is based on experimentally observed physical phenomena. These include a free stagnation point aft of the airfoil and a standing vortex in the separated region. A computer program is described which iteratively matches the outer potential flow, the airfoil turbulent boundary layer, the separated jet entrainment, mass conservation in the separated bubble, and the rear stagnation pressure. Separation location and pressure are not specified a priori. Results are presented for surface pressure coefficient and compared with experiment for three angles of attack for a GA(W)-1, 17% thick airfoil.

Zumwalt, G. W.↗

A test of a cumulus parameterization model using the GATE data

Two parametric, ensemble cloud models were tested with data obtained during GATE (GARP Atlantic Tropical Experiment) (1974). The first model is an adaption of the Arakawa-Schubert scheme which uses an entraining jet to represent individual cumulus cloud types. The second model consists of an ensemble of cylindrical cells to represent the convective cloud field.

Rodenhuis, D.↗

Length and bursting of separation bubbles: A physical interpretation

A physical interpretation of the observed form of the pressure distribution beneath a two-dimensional separation bubble which modified the external inviscid pressure distribution only locally is given in terms of boundary layer concepts. A simple method for estimating along a mean streamline entrained into the underside of a growing shear layer through the transition region is discussed, and predictions of bubble bursting conditions and a lower bound on the bubble length are compared with experiment.

Russell, J. M.↗

An experimental and theoretical investigation of the effect of nonmetric over-the-wing nacelles on wing-body aerodynamics

Drag reduction benefits due to blowing the jet exhausts over the wing for a transport-type wing-body configuration were investigated in the Langley 16-foot transonic tunnel. A combination of a wing-body model and a powered-nacelle test rig was tested at Mach numbers of 0.50 and 0.80 at angles of attack from -2 degrees to 4 degrees and jet total-pressure ratios from jet off to 3 or 4 (depending on Mach number) for a variety of nacelle locations relative to the wing. The experimental results were compared with the predictions obtained from several theoretical techniques. It was concluded that positioning of the nacelles (nonmetric) can have large effects on the wing-body drag. Some positions yielded higher drag than the baseline position, whereas others yielded lower drag than the baseline position. The theoretical method which utilized a quasi-vortex-lattice for the wing and wing-jet interaction in combination with a jet entrainment model gave generally reasonable predictions of the drag increments.

Reubush, D. E.↗