Search NASA⌕ Search

SEARCH · Search NASA

Results for “ether”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Catalytic Upgrading of Ethanol into Diesel-Fuel Range C10+ Ethers

Historically, ethanol has been blended into light-duty fuels, mainly in gasoline. However, with the technological advancements in batteries, there is a projected decline in the demand of light-duty fuels in the next 20 years. This is attributed to the rise of electric vehicles, lowering the demand of gasoline. At the same time, there is a projected increase in the demand for transportation fuels such as rail, aviation, marine and heavy duty. The biggest market of transportation fuels is heavy-duty, and in this presentation, we will focus on how we can shift the use of ethanol from light-duty fuel technology, to heavy-fuel duty technology for the development of diesel #2.

Canales, Emmanuel↗
DOE OSTI2020

A Micelle Electrolyte Enabled by Fluorinated Ether Additives for Polysulfide Suppression and Li Metal Stabilization in Li-S Battery

The Li-S battery is a promising next-generation technology due to its high theoretical energy density (2600 Wh kg -1 ) and low active material cost. However, poor cycling stability and coulombic efficiency caused by polysulfide dissolution have proven to be major obstacles for a practical Li-S battery implementation. In this work, we develop a novel strategy to suppress polysulfide dissolution using hydrofluoroethers (HFEs) with bi-functional, amphiphlic surfactant-like design: a polar lithiophilic "head" attached to a fluorinated lithiophobic "tail." A unique solvation mechanism is proposed for these solvents whereby dissociated lithium ions are readily coordinated with lithiophilic "head" to induce self-assembly into micelle-like complex structures. Complex formation is verified experimentally by changing the additive structure and concentration using small angle X-ray scattering (SAXS). These HFE-based electrolytes are found to prevent polysulfide dissolution and to have excellent chemical compatibility with lithium metal: Li||Cu stripping/plating tests reveal high coulombic efficiency (>99.5%), modest polarization, and smooth surface morphology of the uniformly deposited lithium. Li-S cells are demonstrated with 1395 mAh g-1 initial capacity and 71.9% retention over 100 cycles at >99.5% efficiency-evidence that the micelle structure of the amphiphilic additives in HFEs can prohibit polysulfide dissolution while enabling facile Li + transport and anode passivation.

25 ENERGY STORAGE↗
NASA NTRS1969

Mixed ether bath for electrodeposition of aluminum

Anisole added to the bath mixture improves Brenner aluminum plating bath technique. Mixture has lower bath vapor-pressure and the electro-deposits obtained have greater physical strength than deposits from the Brenner bath.

Lui, K.↗
NASA NTRS1971

Elastohydrodynamic film thickness measurements with advanced ester, fluorocarbon, and polyphenyl ether lubricants to 589 K (600 F)

Elastohydrodynamic (EHD) film thicknesses have been measured, by means of an X-ray technique, under conditions that closely simulate the ball-race contact in advanced turbine engine thrust bearings. The experiments were conducted with a rolling-disk machine using disks which yield a contact zone similar to that in the actual bearing. Both the rolling and spinning motions of the ball relative to the race were simulated by the apparatus. Four lubricants were evaluated at temperatures to 600 F and maximum Hertz stresses to 350,000 psi. The X-ray film thickness data correlated well with observations of surface distress (or lack thereof) in full-scale bearing tests with the same lubricants under similar conditions of temperature and load. The predicted variation of film thickness with speed and viscosity as verified, although the magnitude of measured film thickness was generally one-half to one-third of predicted values. An effect of stress greater than predicted was consistently observed in the higher stress range.

Parker, R. J.↗
NASA NTRS1975

Polyperfluoroalkylene ethers as high-temperature sealants

After a review of some of the literature to point out limitations in fluoroether synthesis, current work is discussed that is designed to alleviate deficiencies in obtaining high molecular weights, and projections on some of the challenges for future work in this area are given. Several mechanisms are diagrammed. The work of Dr. Price is emphasized.

Rosser, R. W.↗
NASA NTRS1978

Phytanyl-glycerol ethers and squalenes in the archaebacterium Methanobacterium thermoautotrophicum

Gas chromatographic and mass- and infrared-spectrometric techniques are used to assay the lipids of a thermophilic chemolithotroph, Methanobacterium thermoautotrophicum. Of the chloroform-soluble lipids, 79% are polar and 21% non-polar. Attention is given to the detection of squalene and hydrosqualene derivatives, which, coupled with 16S r-RNA sequence homologies, indicate that the extreme halophiles and the methanogens share a common ancestor.

Tornabene, T. G.↗
NASA NTRS1981

Synthesis and characteristics of polyarylene ether sulfones

A method utilizing potassium carbonate/dimethyl acetamide, as base and solvent respectively, was used for the synthesis of several homopolymers and copolymers derived from various bisphenols. It is demonstrated that this method deviates from simple second order kinetics; this deviation being due to the heterogeneous nature of the reaction. Also, it is shown that a liquid induced crystallization process can improve the solvent resistance of these polymers. Finally, a Monte Carlo simulation of the triad distribution of monomers in nonequilibrium copolycondensation is discussed.

Viswanathan, R.↗
NASA NTRS1984

Perfluoroalkylene-Ether Triazine Elastomers

New process yields product that resists heat and action of oxygen and water. Ring closing step, which gives elastomer its stability, imidoylamidine dinitrile reacts with perfluoroether acide, yielding prepolymer. Prepolymer then treated with ammonia and cured by heating to form polymer. Elastomers are highly resistant to heat, oxidation, and hydrolysis.

Rosser, R. W.↗
NASA NTRS1984

The ethereal rings of Jupiter and Saturn

The brighter main band of the Jovian ring, which is tenuous and exhibits little substructure, lies in the equatorial plane at 1.7-1.8 Jupiter radii, R(J); this is well within the Roche limit. Since dynamical evolution times and survival lifetimes for micron grains are of the order of less than 100-1000 years, the visible Jovian ring must be continuously replenished. It is suggested that most small grains are generated by micrometeoroids colliding into unseen parent bodies residing in the main band. The halo is composed of still smaller particles and is radially localized at about 1.3-1.7 R(J). Unlike the rings of Saturn and Uranus, the Jovian rings are distinguished by the determination of their form by single-particle dynamics rather than collective effects.

Burns, J. A.↗
NASA NTRS1985

The effects of metals and inhibitors on thermal oxidative degradation reactions of unbranched perfluoroalkyl ethers

Thermal oxidative degradation studies were performed on unbranched perfluoroalkylethers at 288 C in oxygen. Metals and alloys studied included Ti, Al, and Ti (4 Al, 4 Mn). The mechanism of degradation was by chain scission. Ti and Al promoted less degradation than Ti (4 Al, 4 Mn). The two inhibitors investigated (a perfluorophenyl phosphine and a phosphatriazine) reduced degradation rates by several orders of magnitude. Both inhibitors were effective for the same duration (75 to 100 hours). The phosphatriazine appeared to provide more surface protection.

Jones, W. R., Jr.↗
NASA NTRS1987

Improved perfluoroalkyl ether fluid development

The feasibility of transforming a commercial linear perfluoroalkylether fluid into a material stable in the presence of metals and metal alloys in oxidizing atmospheres at 300 C without the loss of the desirable viscosity temperature characteristics was determined. The approach consisted of thermal oxidative treatment in the presence of catalyst to remove weak links, followed by transformation of the created functional groups into phospha-s-triazine linkages. It is found that the experimental material obtained in 66 percent yield from the commercial fluid exhibits, over an 8 hr period at 300 C in the presence of Ti(4Al, 4Mn) alloy, thermal oxidative stability better by a factor of 2.6 x 1000 based on volatiles evolved than the commercial product. The viscosity and molecular weight of the developed fluid are unchanged and are essentially identical with the commercial material. No metal corrosion occurs with the experimental fluid at 300 C.

Jones, William R., Jr.↗