Search NASA⌕ Search

SEARCH · Search NASA

Results for “field data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

GMSEC Interface Specification Document 2016 March

The GMSEC Interface Specification Document contains the standard set of defined messages. Each GMSEC standard message contains a GMSEC Information Bus Header section and a Message Contents section. Each message section identifies required fields, optional fields, data type and recommended use of the fields. Additionally, this document includes the message subjects associated with the standard messages. The system design of the operations center should ensure the components that are selected use both the API and the defined standard messages in order to achieve full interoperability from component to component.

Handy, Matthew↗
NASA NTRS2011

Interplanetary Magnetic Field Power Spectrum Variations in the Inner Heliosphere: A Wind and MESSENGER Study

The newly reprocessed high time resolution (11/22 vectors/sec) Wind mission interplanetary magnetic field data and the similar observations made by the MESSENGER spacecraft in the inner heliosphere affords an opportunity to compare magnetic field power spectral density variations as a function of radial distance from the Sun under different solar wind conditions. In the reprocessed Wind Magnetic Field Investigation (MFI) data, the spin tone and its harmonics are greatly reduced that allows the meaningful fitting of power spectra to the approx.2 Hz limit above which digitization noise becomes apparent. The powe'r spectral density is computed and the spectral index is fitted for the MHD and ion inertial regime separately along with the break point between the two for various solar wind conditions. Wind and MESSENGER magnetic fluctuations are compared for times when the two spacecraft are close to radial and Parker field alignment. The functional dependence of the ion inertial spectral index and break point on solar wind plasma and magnetic field conditions will be discussed.

Szabo, Adam↗
NASA NTRS2000

Quantifying Vegetation Change in Semiarid Environments: Precision and Accuracy of Spectral Mixture Analysis and the Normalized Difference Vegetation Index

Because in situ techniques for determining vegetation abundance in semiarid regions are labor intensive, they usually are not feasible for regional analyses. Remotely sensed data provide the large spatial scale necessary, but their precision and accuracy in determining vegetation abundance and its change through time have not been quantitatively determined. In this paper, the precision and accuracy of two techniques, Spectral Mixture Analysis (SMA) and Normalized Difference Vegetation Index (NDVI) applied to Landsat TM data, are assessed quantitatively using high-precision in situ data. In Owens Valley, California we have 6 years of continuous field data (1991-1996) for 33 sites acquired concurrently with six cloudless Landsat TM images. The multitemporal remotely sensed data were coregistered to within 1 pixel, radiometrically intercalibrated using temporally invariante surface features and geolocated to within 30 m. These procedures facilitated the accurate location of field-monitoring sites within the remotely sensed data. Formal uncertainties in the registration, radiometric alignment, and modeling were determined. Results show that SMA absolute percent live cover (%LC) estimates are accurate to within ?4.0%LC and estimates of change in live cover have a precision of +/-3.8%LC. Furthermore, even when applied to areas of low vegetation cover, the SMA approach correctly determined the sense of clump, (i.e., positive or negative) in 87% of the samples. SMA results are superior to NDVI, which, although correlated with live cover, is not a quantitative measure and showed the correct sense of change in only 67%, of the samples.

Elmore, Andrew J.↗
NASA NTRS2010

Interplanetary Magnetic Field Power Spectrum Variations: A VHO Enabled Study

The newly reprocessed high time resolution (11/22 vectors/sec) Wind mission interplanetary magnetic field data and the solar wind key parameter search capability of the Virtual Heliospheric Observatory (VHO) affords an opportunity to study magnetic field power spectral density variations as a function of solar wind conditions. In the reprocessed Wind Magnetic Field Investigation (MFI) data, the spin tone and its harmonics are greatly reduced that allows the meaningful fitting of power spectra to the approx.2 Hz limit above which digitization noise becomes apparent. The power spectral density is computed and the spectral index is fitted for the MHD and ion inertial regime separately along with the break point between the two for various solar wind conditions . The time periods of fixed solar wind conditions are obtained from VHO searches that greatly simplify the process. The functional dependence of the ion inertial spectral index and break point on solar wind plasma and magnetic field conditions will be discussed

Szabo, A.↗
NASA NTRS2011

Interplanetary Magnetic Field Power Spectrum Variations: A VHO Enabled Study

The newly reprocessed high time resolution (11/22 vectors/sec) Wind mission interplanetary magnetic field data and the solar wind key parameter search capability of the Virtual Heliospheric Observatory (VHO) affords an opportunity to study magnetic field power spectral density variations as a function of solar wind conditions. In the reprocessed Wind Magnetic Field Investigation (MFI) data, the spin tone and its harmonics are greatly reduced that allows the meaningful fitting of power spectra to the ~2 Hz limit above which digitization noise becomes apparent. The power spectral density is computed and the spectral index is fitted for the MHD and ion inertial regime separately along with the break point between the two for various solar wind conditions. The time periods of fixed solar wind conditions are obtained from VHO searches that greatly simplify the process. The functional dependence of the ion inertial spectral index and break point on solar wind plasma and magnetic field conditions will be discussed

Szabo, A.↗
NASA NTRS1982

Far-Field Antenna Pattern From a Near-Field Test

Plane/polar geometry simplifies measurement of near-field data for this antenna and allows a determination of far-field pattern by Jacobi-Bessel series expansion of data. Measuring probe is an undersized, dielectrically loaded and open-ended waveguide with a far-field pattern similar to that of a small magnetic dipole in its forward directions, making it unnecessary to rotate probe in direction similar to antenna rotation.

Rahmat-Samii, Y.↗
DOE OSTI2025

High temporal frequency data from a four turbine, blade-resolved wind farm simulation with ExaWind

The data was generated with ExaWind (https://github.com/Exawind) which couples AMR-Wind (https://github.com/Exawind/amr-wind/), Nalu-Wind (https://github.com/Exawind/nalu-wind), TIOGA (https://github.com/Exawind/tioga), and OpenFAST (https://github.com/OpenFAST/openfast). This is a large-scale simulation of a blade-resolved wind farm using the ExaWind software stack. ExaWind couples together a background flow solver, AMR-Wind, and a near-body solver, Nalu-Wind, through an overset technique from the TIOGA application. Another application, OpenFAST, handles the structural dynamics of the turbine blades and towers, which informs the fluid-structure interaction of the wind turbines with the flow solvers. This particular simulation includes four blade-resolved wind turbines operating in a turbulent atmospheric boundary layer. The AMR-Wind solver uses 500 million cells and is being solved on 256 AMD GPUs of the Oakridge Leadership Computing Facility Frontier supercomputer. Each turbine is assigned its own Nalu-Wind solver with over 13 million elements per turbine and solved using 448 CPU cores, for a total of 1792 CPU cores. For each node, 56 cores contain Nalu-Wind, while 8 cores correspond to AMR-Wind operations on the GPUs. Consequently, ExaWind is entirely utilizing the CPUs and the GPUs of the nodes concurrently. The data used in the visualization is full flow field data output from the simulation. It is lossy-compressed to a specific accuracy using ZFP and written to disk every 16 time-steps to enable real-time flow visualization. The flow fields are sampled at a high temporal frequency to enable real-time, 24fps visualization. The flow fields are sampled every 12 simulation time steps (every 0.04132s).

17 WIND ENERGY↗
NASA NTRS1988

More than a solar cycle of synoptic solar and coronal data - A video presentation

Color video movies of synoptic observations of the sun and corona can now be created. Individual analog frames on laser disks can be referenced digitally and played back at any speed. We have brought together photospheric magnetic field data from the Wilcox Solar Observatory at Stanford and the National Solar Observatory, model computations of the coronal magnetic field, and coronal data from the Sacramento Peak coronagraph and the Mauna Loa K-coronameter and made a series of movies presenting the data sets individually and in comparison with one another. This paper presents a description of each of the data sets and movies developed thus far and briefly outlines some of the more interesting and obvious features observed when viewing the movies.

Hoeksema, J. T.↗
NASA NTRS1984

Assessment of LANDSAT for rangeland mapping, Rush Valley, Utah

The feasibility of using LANDSAT MSS (multispectral scanner) data to identify and map cover types for rangeland, and to determine comparative condition of the ecotypes was assessed. A supporting objective is to assess the utility of various forms of aerial photography in the process. If rangelands can be efficiently mapped with Landsat data, as supported by appropriate aerial photography and field data, then uniform standards of cover classification and condition may be applied across the rangelands of the state. Further, a foundation may be established for long-term monitoring of range trend, using the same satellite system over time.

Ridd, M. K.↗
NASA NTRS1986

Interpretation of satellite elevation magnetic anomalies

The present discussion is based on a study of the magnetic field data obtained with the aid of the magnetic field satellite Magsat, deployed in October 1979, over most of the earth during a 7.5-month mission. Inversions using spherical harmonic coefficients are considered along with the inversion of residual fields. In order to perform the correct operation, it is necessary to add on to the source function produced by the inversion process a magnetization function which has no external field. Such a function is known as an annihilator. The use of the annihilator for Pacific Ocean anomalies is discussed. Attention is given to models of oceanic crustal magnetization, and continental long-wavelength anomalies. It is found that in continental regions the annihilator is also useful if induced magnetizations are thought to be responsible for the long-wavelength anomaly.

Harrison, C. G. A.↗
NASA NTRS1987

Studies and analyses of the space shuttle main engine. Failure information propagation model data base and software

The failure information propagation model (FIPM) data base was developed to store and manipulate the large amount of information anticipated for the various Space Shuttle Main Engine (SSME) FIPMs. The organization and structure of the FIPM data base is described, including a summary of the data fields and key attributes associated with each FIPM data file. The menu-driven software developed to facilitate and control the entry, modification, and listing of data base records is also discussed. The transfer of the FIPM data base and software to the NASA Marshall Space Flight Center is described. Complete listings of all of the data base definition commands and software procedures are included in the appendixes.

Tischer, A. E.↗
NASA NTRS1990

Particle image fields and partial coherence

The accuracy of Young's fringe method for reducing velocity field data is compromized by a spatially incoherent background field which originates in the random locations of the seeding particles. The probability density function for the spatial frequency cutoff of this background is derived as a function of the particle count, the distribution governing the power in each frequency interval is derived, and conditions are found under which the Van Cittert-Zernike theorem applies. The background field resembles the far field of a partially coherent source in the high particle count limit, but departs significantly at low and moderate counts.

Rubinstein, Robert↗
NASA NTRS2024

NEWS Integrated Analysis (NEWS-IA) Dataset: Budgets and Input Data

This documentation provides a summary of the underlying physical and mathematical descriptions of the global energy and water cycle budgets used to produce the NASA Energy and Water Cycle Study (NEWS) Integrated Analysis. In addition to discussion of the budget equations, a summary is provided concerning NEWS regions, input data sources, and data fields found in the NEWS-IA input data file.

J Brent Roberts↗
NASA NTRS1993

Laser velocimeter measurements of the flow field generated by a forward-swept propfan during flutter

Results are presented from an investigation to measure the flow field generated by a forward-swept propfan operating in flutter at a low forward velocity. For comparison to the flutter condition, flow field data are also presented for a slightly reduced rotational speed just below flutter. The forward-swept propfan was tested as the front rotor of a counterrotating pusher propeller. A laser Doppler velocimeter (LDV) was used to measure the velocity field in planes normal to the model centerline downstream of the rotor and in planes of constant radius within the blade passages at each operating condition. A comparison of the data taken at the two different operating conditions indicated that the mean, time-averaged flow about the blades did not change drastically as the propfan rotational speed was increased from the stable operating point to the flutter condition. No regions of flow separation could be identified in the data plots of the mean intrablade flow field. The data also indicate that the relative flow about the blades remained subsonic during flutter operation. The blades were found to have a higher than expected tip loading at both operating conditions. This is thought to have been caused by the outer blade sections twisting under load to higher than expected effective blade angles. This high tip loading resulted in strong vortices and a very nonuniform flow downstream of the tips of the forward-swept blades. This high tip loading may also have caused the blade flutter.

Podboy, Gary G.↗
NASA NTRS1992

Visualization of second order tensor fields and matrix data

We present a study of the visualization of 3-D second order tensor fields and matrix data. The general problem of visualizing unsymmetric real or complex Hermitian second order tensor fields can be reduced to the simultaneous visualization of a real and symmetric second order tensor field and a real vector field. As opposed to the discrete iconic techniques commonly used in multivariate data visualization, the emphasis is on exploiting the mathematical properties of tensor fields in order to facilitate their visualization and to produce a continuous representation of the data. We focus on interactively sensing and exploring real and symmetric second order tensor data by generalizing the vector notion of streamline to the tensor concept of hyperstreamline. We stress the importance of a structural analysis of the data field analogous to the techniques of vector field topology extraction in order to obtain a unique and objective representation of second order tensor fields.

Delmarcelle, Thierry↗
DOE OSTI2024

Digital image correlation and infrared thermography data for seven unique geometries of 304L stainless steel

Material Testing 2.0 (MT2.0) is a paradigm that advocates for the use of rich, full-field data, such as from digital image correlation and infrared thermography, for material identification. By employing heterogeneous, multi-axial data in conjunction with sophisticated inverse calibration techniques such as finite element model updating and the virtual fields method, MT2.0 aims to reduce the number of specimens needed for material identification and to increase confidence in the calibration results. To support continued development, improvement, and validation of such inverse methods—specifically for rate-dependent, temperature-dependent, and anisotropic metal plasticity models—we provide here a thorough experimental data set for 304L stainless steel sheet metal. The data set includes full-field displacement, strain, and temperature data for seven unique specimen geometries tested at different strain rates and in different material orientations. Commensurate extensometer strain data from tensile dog bones is provided as well for comparison. We believe this complete data set will be a valuable contribution to the experimental and computational mechanics communities, supporting continued advances in material identification methods.

36 MATERIALS SCIENCE↗
NASA NTRS1991

Airborne observations of electric fields around growing and decaying cumulus clouds

Airborne electric field data were gathered in an atmospheric electrification study near Cape Canaveral, FL. A Learjet 36A was instrumented with eight electric field meters (mills) and five different particle probes. The local electric field enhancements at each field mill site were determined under lab conditions and verified using in-flight data. The overdetermined system of eight equations (one for each field mill) was solved using a weighted least squares algorithm to compute the magnitude and direction of the ambient electric field. The signal processing system allowed the measured data to be expressed in terms of earth coordinates, regardless of the attitude of the aircraft. Thus, it was possible to take maximum advantage of the Learjet's speed and maneuverability in studying the electric field structure in the vicinity of the clouds. Data gathered while circling just outside the boundary of a growing cumulus cloud show a nonsymmetric pattern of electric field strength. Field intensity grew rapidly over a period of less than 10 minutes. The observed direction of the ambient electric field vector can be explained by an ascending motion of the charge centers of a classic tripole model of a thunderstorm.

Giori, K. L.↗