Search NASA⌕ Search

SEARCH · Search NASA

Results for “fitting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

New Fitting Formula for Cosmic Nonlinear Density Distribution

We have measured the probability distribution function (PDF) of a cosmic matter density field from a suite of N-body simulations. We propose the generalized normal distribution of version 2 (N{sub v2}) as an alternative fitting formula to the well-known log-normal distribution. We find that N{sub v2} provides a significantly better fit than that of the log-normal distribution for all smoothing radii (2, 5, 10, 25 [Mpc h {sup −1}]) that we studied. The improvement is substantial in the underdense regions. The development of non-Gaussianities in the cosmic matter density field is captured by continuous evolution of the skewness and shift parameters of the N{sub v2} distribution. We present the redshift evolution of these parameters for aforementioned smoothing radii and various background cosmology models. All the PDFs measured from large and high-resolution N-body simulations that we use in this study can be obtained from the web site https://astro.kias.re.kr/jhshin.

79 ASTRONOMY AND ASTROPHYSICS↗

The Dependence of the Type Ia Supernova Host Bias on Observation or Fitting Technique

More luminous Type Ia supernovae prefer less massive hosts and regions of higher star formation. This correlation is inverted during width–color–luminosity light-curve standardization resulting in step-like biases of distance measurements with respect to host properties. Using the PMAS/PPak Integral-field Supernovahosts COmpilation (PISCO) supernova host sample and Sloan Digital Sky Survey, Galaxy Evolution Explorer, and Two Micron All Sky Survey photometry, we compare host stellar mass and specific star-formation rate (sSFR) from different observation methods, including local versus global, and fitting techniques to measure their impact on the host step biases. Mass-step measurements for all our mass samples are consistent within a 1σ significance from –0.03 ± 0.02 mag to –0.04 ± 0.02 mag. Including or excluding UV information had no effect on measured mass-step size or location. sSFR step sizes are more significant than mass-step measurements and varied from 0.05 ± 0.03 mag (Hα) and 0.06 ± 0.02 mag (UV) for a 51 host sample. The sSFR step location is influenced by the mass sample used to normalize star formation and by sSFR tracer choice. The step size is reduced to 0.04 ± 0.03 mag when using all available 73 hosts with Hα measurements. This 73 PISCO host subsample overall lacked a clear step signal, but here we are searching for whether different choices of mass or sSFR estimation can create a step signal. We find no evidence that different observation or fitting techniques choices can create a distance measurement step in either mass or sSFR.

79 ASTRONOMY AND ASTROPHYSICS↗

Single-molecule FRET unveils induced-fit mechanism for substrate selectivity in flap endonuclease 1

Human flap endonuclease 1 (FEN1) and related structure-specific 5’nucleases precisely identify and incise aberrant DNA structures during replication, repair and recombination to avoid genomic instability. Yet, it is unclear how the 5’nuclease mechanisms of DNA distortion and protein ordering robustly mediate efficient and accurate substrate recognition and catalytic selectivity. Here, single-molecule sub-millisecond and millisecond analyses of FEN1 reveal a protein-DNA induced-fit mechanism that efficiently verifies substrate and suppresses off-target cleavage. FEN1 sculpts DNA with diffusion-limited kinetics to test DNA substrate. This DNA distortion mutually ‘locks’ protein and DNA conformation and enables substrate verification with extreme precision. Strikingly, FEN1 never misses cleavage of its cognate substrate while blocking probable formation of catalytically competent interactions with noncognate substrates and fostering their pre-incision dissociation. These findings establish FEN1 has practically perfect precision and that separate control of induced-fit substrate recognition sets up the catalytic selectivity of the nuclease active site for genome stability.

59 BASIC BIOLOGICAL SCIENCES↗

Type Ia Supernova Intrinsic Magnitude Dispersion and the Fitting of Cosmological Parameters

I present an analysis for fitting cosmological parameters from a Hubble Diagram of a standard candle with unknown intrinsic magnitude dispersion. The dispersion is determined from the data themselves, simultaneously with the cosmological parameters. This contrasts with the strategies used to date. The advantages of the presented analysis are that it is done in a single fit (it is not iterative), it provides a statistically founded and unbiased estimate of the intrinsic dispersion, and its cosmological-parameter uncertainties account for the intrinsic dispersion uncertainty. Applied to Type Ia supernovae, my strategy provides a statistical measure to test for sub-types and assess the significance of any magnitude corrections applied to the calibrated candle. Parameter bias and differences between likelihood distributions produced by the presented and currently-used fitters are negligibly small for existing and projected supernova data sets.

79 ASTRONOMY AND ASTROPHYSICS↗

TSALLIS FITS TO pT SPECTRA FOR pp COLLISIONS AT THE LHC

Phenomenological Tsallis fits to the CMS and ATLAS transverse spectra of charged particles were found to extend for pT from 0.5 to 181 GeV in pp collisions at the LHC at sqrt(s) = 7 TeV, and for pT from 0.5 to 31 GeV at sqrt(s) = 0.9 TeV. The simplicity of the Tsallis parametrization and the large range of the fitting transverse momentum raise questions on the physical meaning of the degrees of freedom that enter into the Tsallis distribution or q-statistics

Wilk, Grzegorz↗

Reliability of temperature determination from curve-fitting in multi-wavelength pyrometery

Abstract This paper examines the reliability of a widely used method for temperature determination by multi-wavelength pyrometry. In recent WDM experiments with ion-beam heated metal foils, we found that the statistical quality of the fit to the measured data is not necessarily a measure of the accuracy of the inferred temperature. We found a specific example where a second-best fit leads to a more realistic temperature value. The physics issue is the wavelength-dependent emissivity of the hot surface. We discuss improvements of the multi-frequency pyrometry technique, which will give a more reliable determination of the temperature from emission data.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Overhead-Aware-Best-Fit (OABF) Resource Allocation Algorithm for Minimizing VM Launching Overhead

FermiCloud is a private cloud developed in Fermi National Accelerator Laboratory to provide elastic and on-demand resources for different scientific research experiments. The design goal of the FermiCloud is to automatically allocate resources for different scientific applications so that the QoS required by these applications is met and the operational cost of the FermiCloud is minimized. Our earlier research shows that VM launching overhead has large variations. If such variations are not taken into consideration when making resource allocation decisions, it may lead to poor performance and resource waste. In this paper, we show how we may use an VM launching overhead reference model to minimize VM launching overhead. In particular, we first present a training algorithm that automatically tunes a given refer- ence model to accurately reflect FermiCloud environment. Based on the tuned reference model for virtual machine launching overhead, we develop an overhead-aware-best-fit resource allocation algorithm that decides where and when to allocate resources so that the average virtual machine launching overhead is minimized. The experimental results indicate that the developed overhead-aware-best-fit resource allocation algorithm can significantly improved the VM launching time when large number of VMs are simultaneously launched.

Wu, Hao↗

Resistance properties of coal-water slurry flowing through local piping fittings

Local resistance characteristics of coal-water slurry (CWS) flowing through three types of piping components, namely gradual contractions, sudden contractions and 90 horizontal bends, were investigated at a transportation test facility. The results show that CWS exhibits different rheological behaviors, i.e., the shear-thinning, Newtonian, and shear-thicken, at different shear rates. When CWS flows through the gradual contractions, the local pressure loss firstly decreases to a minimum, and then increases as the gradual contraction angle {theta} increases. When the CWS flow through the sudden contractions, with the increase of pipe diameter ratio {beta}, the local pressure loss increases for the two kinds of CWS, SHEN-HUA (S-H) CWS and YAN-ZHOU (Y-Z) CWS whose mass concentration range from 57% to 59% and 59% to 62%, respectively. For 90 horizontal bends, there is an optimal value of the bend diameter ratio (Rc/D) at which the local pressure loss is the least. Furthermore, the local resistance coefficient (K) in the empirical correlations is determined from the experimental data. The correlations show that as Re increases, K of the three fittings declines quickly at first. However, with further increase in Re, K shows different behaviors for the three fittings due to the special rheological property of CWS at higher shear rates. The factors of theta, beta and Rc/D have minor effects on K.

01 COAL, LIGNITE, AND PEAT↗

Rejection Sampling with Autodifferentiation -- Case study: Fitting a Hadronization Model

We present an autodifferentiable rejection sampling algorithm termed Rejection Sampling with Autodifferentiation (RSA). In conjunction with reweighting, we show that RSA can be used for efficient parameter estimation and model exploration. Additionally, this approach facilitates the use of unbinned machine-learning-based observables, allowing for more precise, data-driven fits. To showcase these capabilities, we apply an RSA-based parameter fit to a simplified hadronization model.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurements of the Semileptonic Decays \Bb\to D\ell\nub and \Bb\to D^*\ell\nub Using a Global Fit to D X\ell\nub Final States

Semileptonic {bar B} decays to DX{ell}{bar {nu}} ({ell} = e or {mu}) are selected by reconstructing D{sup 0}{ell} and D{sup +}{ell} combinations from a sample of 230 million {Upsilon}(4S) {yields} B{bar B} decays recorded with the BABAR detector at the PEP-II e{sup +}e{sup -} collider at SLAC. A global fit to these samples in a 3-dimensional space of kinematic variables is used to determine the branching fractions {Beta}(B{sup -} {yields} D{sup 0}{ell}{bar {nu}}) = 2.36 {+-} 0.03 {+-} 0.12% and {Beta}(B{sup -} {yields} D*{sup 0}{ell}{bar {nu}}) = (5.37 {+-} 0.02 {+-} 0.21)% where the errors are statistical and systematic, respectively. The fit also determines form factor parameters in a HQET-based parameterization, resulting in {rho}{sub D}{sup 2} = 1.22 {+-} 0.04 {+-} 0.07 for {bar B} {yields} D{ell}{bar {nu}} and {rho}{sub D*}{sup 2} = 1.21 {+-} 0.02 {+-} 0.07 for {bar B} {yields} D*{ell}{bar {nu}}. These values are used to obtain the product of the CKM matrix element |V{sub cb}| times the form factor at the zero recoil point for both {bar B} {yields} D{ell}{bar {nu}} decays, G(1)|V{sub cb}| = (43.8 {+-} 0.8 {+-} 2.3) x 10{sup -3}, and for {bar B} {yields} D*{ell}{bar {nu}} decays, F(1)|V{sub cb}| = (35.7 {+-} 0.2 {+-} 1.2) x 10{sup -3}.

43 PARTICLE ACCELERATORS↗

A Variation of the F-Test for Determining Statistical Relevance of Particular Parameters in EXAFS Fits

A general problem when fitting EXAFS data is determining whether particular parameters are statistically significant. The F-test is an excellent way of determining relevance in EXAFS because it only relies on the ratio of the fit residual of two possible models, and therefore the data errors approximately cancel. Although this test is widely used in crystallography (there, it is often called a 'Hamilton test') and has been properly applied to EXAFS data in the past, it is very rarely applied in EXAFS analysis. We have implemented a variation of the F-test adapted for EXAFS data analysis in the RSXAP analysis package, and demonstrate its applicability with a few examples, including determining whether a particular scattering shell is warranted, and differentiating between two possible species or two possible structures in a given shell.

36 MATERIALS SCIENCE↗

Transverse impedance measurement using response matrix fit method at APS.

The Advanced Photon Source (APS) is a third-generation synchrotron light source based on a 7-GeV electron storage ring. In third-generation light sources the synchrotron radiation is mainly produced in undulators. In order to achieve high photon flux and tunability, the magnet gap in undulators has to be as small as possible. Therefore, the undulators are installed on dedicated small-gap insertion device (ID) vacuum chambers. APS has thirty-five 5-m-long straight sections available for undulators. At the time of the measurements, there were 31 straight sections occupied with various insertion devices, and 4 straight sections were still empty. Most of the ID vacuum chambers have a 8-mm in-vacuum gap, and two chambers have a 5-mm gap. These narrow-gap vacuum chambers are believed to be the main source of the transverse impedance of the machine. One can measure the combined impedance by measuring the transverse tune slope with single-bunch current. Comparing this slope before and after installation of the narrow-gap vacuum chamber, one can deduce the impedance of the chamber. It is difficult to accurately measure the change in the tune slope after one or a few new ID chambers are installed. If several identical ID vacuum chambers are installed over a period of time, then one can estimate the contribution of one ID chamber. Over the last few years there have been a number of attempts to measure the impedance of separate components of accelerators. Phase-advance measurements from beam position monitor (BPM) turn-by-turn histories were used at LEP to measure the impedance distribution around the ring. Researches at LEP were able to fit average impedance in the long sections of the LEP arc and determine the impedance of the rf sections. The method was tried at APS; however, the accuracy of the measurements was not enough to determine the small impedance of a single ID vacuum chamber. There is also a different approach that uses local orbit bumps to probe different parts of an accelerator. The orbit bump method was done at BINP, APS, and ESRF. All these methods have one common feature: they employ the fact that the beam sees the impedance as an additional defocusing quadrupole whose strength depends on the beam current. At APS we use an orbit response matrix fit to determine the distribution of focusing errors around the machine, and then use these errors to calculate beta functions. Since the beam sees the impedance as a quadrupole whose strength depends on the beam current, the measurement of the beta functions with different currents could be used to determine the impedance distribution around the machine. This approach was first used at APS and reported in.

43 PARTICLE ACCELERATORS↗

The track-length extension fitting algorithm for energy measurement of interacting particles in liquid argon TPCs and its performance with ProtoDUNE-SP data

This paper introduces a novel track-length extension fitting algorithm for measuring the kinetic energies of inelastically interacting particles in liquid argon time projection chambers (LArTPCs). The algorithm finds the most probable offset in track length for a track-like object by comparing the measured ionization density as a function of position with a theoretical prediction of the energy loss as a function of the energy, including models of electron recombination and detector response. The algorithm can be used to measure the energies of particles that interact before they stop, such as charged pions that are absorbed by argon nuclei. The algorithm's energy measurement resolutions and fractional biases are presented as functions of particle kinetic energy and number of track hits using samples of stopping secondary charged pions in data collected by the ProtoDUNE-SP detector, and also in a detailed simulation. Additional studies describe the impact of the dE/dx model on energy measurement performance. The method described in this paper to characterize the energy measurement performance can be repeated in any LArTPC experiment using stopping secondary charged pions.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A modified moment-fitted integration scheme for X-FEM applications with history-dependent material data

Here, we present a strategy for the numerical integration of partial elements with the eXtended finite element method (X-FEM). The new strategy is specifically designed for problems with propagating cracks through a bulk material that exhibits inelasticity. Following a standard approach with the X-FEM, as the crack propagates into new regions of the domain, elements are split into several copies that contain pieces of the domain on either side of the crack. We examine quadrature rules that have sufficient accuracy to calculate stiffness matrices regardless of the orientation of the crack with respect to the element. This permits the number of integration points within elements to remain constant as a crack propagates, and for state data to be easily transferred between successive discretizations. In order to maintain weights that are strictly positive, we propose an approach that blends moment-fitted weights with volume-fraction based weights. To demonstrate the efficacy of this simple approach, we present results from numerical tests and examples with both elastic and plastic material response.

42 ENGINEERING↗

Investigation of goodness of model data fit using PLSR and PCR regression models to determine informative wavelength band in NIR region for non-invasive blood glucose prediction

Diabetes mellitus is a metabolic disorder characterized by the deficiency in insulin secretion or insulin action on target tissues. Diabetes being diagnosed, requires frequent monitoring. Current measurement techniques are invasive in nature, which is painful. Non-invasive measurement methods for the prediction of blood glucose is a big challenge. Hence this paper focuses on a comparative study to analyze the performance of the two regression models: partial least square regression (PLSR) and principal component regression (PCR) models to arrive at the best regression model for the prediction of blood glucose non-invasively based on NIR diffuse reflectance spectroscopy. The regression model developed involves spectral data collected from 32 subjects from a diabetic center using diffuse reflectance spectrometer (DRS). The spectroscopic data were acquired from the subjects both invasively using clinical method and non-invasively using DRS setup in the NIR spectral range whose wavelength ranges from 750 to 1040 nm. Multivariate analysis using PLSR is found to be a better regression model in terms of the fitted response and estimated mean square prediction error. It is observed that the mean square error value is 0.04 mg/dl for the tenth component in the PLSR model. The developed regression model also proves to be a useful tool in identifying the informative wavelength bands for blood glucose measurement.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Gene-by-environment interactions influence the fitness cost of gene copy-number variation in yeast

Abstract Variation in gene copy number can alter gene expression and influence downstream phenotypes; thus copy-number variation provides a route for rapid evolution if the benefits outweigh the cost. We recently showed that genetic background significantly influences how yeast cells respond to gene overexpression, revealing that the fitness costs of copy-number variation can vary substantially with genetic background in a common-garden environment. But the interplay between copy-number variation tolerance and environment remains unexplored on a genomic scale. Here, we measured the tolerance to gene overexpression in four genetically distinct Saccharomyces cerevisiae strains grown under sodium chloride stress. Overexpressed genes that are commonly deleterious during sodium chloride stress recapitulated those commonly deleterious under standard conditions. However, sodium chloride stress uncovered novel differences in strain responses to gene overexpression. West African strain NCYC3290 and North American oak isolate YPS128 are more sensitive to sodium chloride stress than vineyard BC187 and laboratory strain BY4743. Consistently, NCYC3290 and YPS128 showed the greatest sensitivities to overexpression of specific genes. Although most genes were deleterious, hundreds were beneficial when overexpressed—remarkably, most of these effects were strain specific. Few beneficial genes were shared between the sodium chloride-sensitive isolates, implicating mechanistic differences behind their sodium chloride sensitivity. Transcriptomic analysis suggested underlying vulnerabilities and tolerances across strains, and pointed to natural copy-number variation of a sodium export pump that likely contributes to strain-specific responses to overexpression of other genes. Our results reveal extensive strain-by-environment interactions in the response to gene copy-number variation, raising important implications for the accessibility of copy-number variation-dependent evolutionary routes under times of stress.

60 APPLIED LIFE SCIENCES↗

Bacterial fitness for plant colonization is influenced by plant growth substrate

Despite advances in our understanding of bacterial plant colonization, the extent to which growth substrate influences the molecular mechanisms enabling bacteria to efficiently colonize plants remains poorly understood. To address this, we used randomly barcoded transposon mutagenesis sequencing (RB-TnSeq) in Paraburkholderia graminis OAS925, an efficient rhizosphere colonizer, and Brachypodium distachyon grown in six different substrates. Of the 382 rhizosphere colonization genes that we identified in OAS925, 348 genes (91.1%) are dependent on the growth substrate evaluated, and 34 genes (8.9%) are shared across all the substrates. Both the core and substrate-dependent colonization genes are from multiple functional categories, demonstrating the multifaceted and major impact that plant growth substrate has on bacterial colonization. The identified colonization genes and their varied importance across plant growth substrates could not be readily explained by differences in root exudate profiles, suggesting that the substrate environment itself plays an outsized role in the ability of a bacterium to colonize the rhizosphere. Our data confirm that bacterial fitness for plant colonization is strongly influenced by plant growth substrate type and highlights the importance of taking this parameter into consideration when engineering bacterial strains for improved host colonization.

Paraburkholderia↗

Experimental Characterization and Modeling of Thermal Contact Resistance of Electric Machine Stator-to-Cooling Jacket Interface Under Interference Fit Loading

Cooling of electric machines is a key to increasing power density and improving reliability. This paper focuses on the design of a machine using a cooling jacket wrapped around the stator. The thermal contact resistance (TCR) between the electric machine stator and cooling jacket is a significant factor in overall performance and is not well characterized. This interface is typically an interference fit subject to compressive pressure exceeding 5 MPa. An experimental investigation of this interface was carried out using a thermal transmittance setup using pressures between 5 and 10 MPa. Furthermore, the results were compared to currently available models for contact resistance, and one model was adapted for prediction of TCR in future motor designs.

30 DIRECT ENERGY CONVERSION↗