Search NASA⌕ Search

SEARCH · Search NASA

Results for “geometry optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

A Comparative Study of Single-pulse and Double-pulse Laser-Induced Breakdown Spectroscopy with Uranium-containing Samples

Laser-induced breakdown spectroscopy (LIBS) holds potential advantages in special nuclear material (SNM) sensing and nuclear forensics which require rapid analysis, minimal sample preparation and stand-off distance capability. SNM, such as U, however, result in crowded emission spectra with LIBS, and characteristic emission lines are challenging to discern. It is well-known that double-pulse LIBS (DPLIBS) improves the signal intensity for analytes over conventional single-pulse LIBS (SPLIBS). This study investigates U signal in a glass matrix using DPLIBS and compares to signal features obtained using SPLIBS. DPLIBS involves sequential firing of 1.06 µm Nd:YAG pre-pulse and 10.6 µm TEA CO2 heating pulse in near collinear geometry. Optimization of experimental parameters including inter-pulse delay and energy follows identification of characteristic lines and signals for bulk analyte Ca and minor constituent analyte U for both DPLIBS and SPLIBS. Spatial and temporal coupling of the two pulses in the proposed DPLIBS technique yields improvements in analytical merits with negligible further damage to the sample compared to SPLIBS. Subsequently, the study discusses optimum plasma emission conditions of U lines and relative figures of merit in both SPLIBS and DPLIBS. Investigation into plasma characteristics also addresses plausible mechanisms related to observed U analyte signal variation between SPLIBS and DPLIBS.

Skrodzki, P. J.↗

Electron Density of Corannulene from Synchrotron Data at 12 K, Comparison with Fullerenes

The electron density of corannulene, C{sub 20}H{sub 10}, was derived from a high-resolution synchrotron data set (sin{theta}/{lambda} = 1.11 {angstrom}{sup -1}) measured at 12 K and from an ab-initio geometry optimization on the B3LYP/6-31G* level. A full topological analysis yielded atomic and bond-topological properties which were compared between experimental and theoretical findings and, as far as steric congruences exist, with corresponding fragments of the fullerene C{sub 70}. For the four different types of C-C bonds in corannulene, a rather close bond-order range between 1.3 and 1.8 was found indicating a considerable delocalization in this molecule. As was already found earlier in fullerene cages, the deformation density on the C-C bonds is not arranged symmetrically. There is more density located outside than inside the corannulene bowl so that in total, charge accumulation is shifted to the outer surface of the molecule. The electrostatic potential suggests an H{hor_ellipsis}{pi} stacking in the crystal which directs the relative orientation of the two crystallographically independent corannulene molecules. The positively charged rim region of one molecule is oriented almost perpendicular to the negative potential region at the bottom of a second molecule.

36 MATERIALS SCIENCE↗

Effect of Reaction Kinetics on Graphene-Edge Morphology and Composition

New simulations of graphene growth in flame environments are presented. The simulations employed a kinetic Monte Carlo (KMC) algorithm coupled to molecular mechanics (MM) geometry optimization to track individual graphenic species as they evolve. Focus was given to incorporation of five-member rings and resulting curvature and edge defects. The model code was re-written to be more computationally efficient enabling a larger set of simulations to be run, decreasing stochastic fluctuations in the averaged results. The model also included updated rate coefficients for graphene edge reactions recently published in the literature. Sensitivity analysis, enabled by the more efficient coding, confirmed the importance of the updated rates as well as providing further insight on key reactions controlling layer growth and morphology. The new KMC code was applied to simulate graphene-layer growth in the environments of laminar premixed flames. Finally, in these flame simulations, C-H ratios of evolving structures were computed and compared to those from experiment and from an alternate model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bonded Interactions and the Crystal Chemistry of Minerals: A Review

Connections established during the 20th century between bond length, radii, bond strength, bond valence and crystal and molecular chemistry are briefly reviewed followed with a survey of the physical properties of the electron density distributions for a variety of minerals and representative molecules, recently generated with first-principles local density based quantum mechanical methods. The structures for several minerals, geometry-optimized at ambient conditions and at a variety of pressures, match those determined experimentally within several percent. The structures and the physical properties of model experimental electron density distributions determined with high resolution and high energy synchrotron single crystal X-ray diffraction data also closely match those calculated with first principles methods. As the electron density is progressively accumulated and locally concentrated between pairs of bonded atoms, the nuclei are progressively shielded and the bond lengths and the bonded radii of the atoms decrease. Concomitant with the decrease in bond length, the local kinetic density energy increases while the potential energy and the electronic energy densities both decrease for intermediate and shared interactions with the potential energy dominating the local energy for the shorter bonded interactions. The shorter the bonds, the more negative the local electronic energy density, the greater the stabilization and the greater the shared character of the bonded interactions.

43 PARTICLE ACCELERATORS↗

Bonded Interactions in Silica Polymorphs, Silicates and Siloxane Molecules

Experimental model electron density distributions recorded for the silica polymorphs coesite and stishovite are comparable with electron density distributions calculated for a variety of silicates and siloxane molecules. The Si-O bond lengths and Si-O-Si angles calculated with first principles density functional theory methods as a function of pressure are also comparable with the bond lengths and angles observed for coesite and quartz within the experimental error. The similarity of the topological properties of the Si-O bonded interactions and the experimental and the geometry optimized structures for the silica polymorphs provides a basis for understanding the properties and crystal chemistry in terms of a molecular-based model. The agreement supports the argument that the bulk of the structural, physical and thermodynamic properties of the silica polymorphs are intrinsic properties of the molecular-like coordinated polyhedra such that the silica polymorphs can be pictured as ‘supermolecules’ of silica bound by the virtually same forces that bind the Si and O atoms in simple siloxane molecules. The topology of the electron density distribution is consistent with the assertion that the Si-O bonded interaction arises from the net electrostatic attraction exerted on the nuclei by the electron density accumulated between the Si and O atoms. The correlation between the Si-O bond length and Si-O-Si angle is ascribed to the progressive local concentration of the electron density in the nonbonded region of the O atom as the bond length increases and angle decreases rather then to bonded interactions involving the d-orbitals on Si. On the basis of the proximity of the bond critical point, rc, to the nodal surface of the Laplacian, (nabla) 2 ρ(r c ), and the values of ρ(r c ) and G(r c )/ρ(r c ), the Si-O bond qualifies as an intermediate bonded interaction. For bonded interactions of intermediate character, (nabla) 2 ρ(r c ) increases linearly as ρ(r c ) increases, the greater the shared character, the larger the value of (nabla) 2 ρ(r c ). In addition, a mapping of (nabla) 2 ρ(r) serves to highlight those Lewis base domains that are susceptible to electrophilic attack by H like the O atom in coesite involved in bent Si-O-Si angles, the narrower the angle, the greater the affinity for H . On the basis of the net charges conferred on the Si and O atoms and the bonded radii of the two atoms, the Si-O bond of stishovite with six-coordinated Si and three-coordinated O is indicated to be more ionic in character than that in quartz with four-coordinated Si and two coordinated O. Unlike the conclusion reached for ionic and crystal radii (quantum mechanical unobservables), it is the bonded radius of the O atom that increases with the increasing coordination number of Si, not the radius of the Si atom. The modeling of the electron density distributions for quartz, coesite and beryl as a function of pressure indicates that the shared character of the bonded interactions in these minerals increases slightly with increasing pressure. The insight provided by the calculations and the modeling of the electron density distributions and the structures of the silica polymorphs bodes well for future Earth materials studies that are expected to improve and clarify our understanding of the connection between properties and structure within the framework of quantum mechanical observables, to find new and improved uses and to predict new properties for materials and to enhance our understanding of crystal chemistry and chemical reactions of materials in their natural environment at the atomic level

36 MATERIALS SCIENCE↗

Final Report: Development of a CW NCRF Photoinjector using Solid Freeform Fabrication

The development of very high duty cycle, high gradient photoinjectors is critical for the next generation of accelerator systems, such as X-ray free-electron lasers (FELs), inverse Compton scattering (ICS) sources, energy recovery linacs (ERLs), injectors for linear colliders, as well as a variety of industrial systems for homeland security applications. NCRF photoinjectors have a proven track record at generating the high-quality beams necessary for these applications, however they are limited in large part to relatively low duty cycles due to ohmic wall looses. Thus a key issue for high average power, normal conducting, photoinjectors is effective structure cooling [9]. The fabrication of current high average-power photoinjectors relies on conventional design and fabrication techniques with many limitations. Advances in Solid Freeform Fabrication (SFF) technology may make it possible to design and produce near net-shape copper structures for the next generation of very high rep rate, high gradient radio frequency (RF) photoinjectors. RF and thermal-management optimized geometries could be fully realized without the usual constraints and compromises of conventional machining techniques*. Further advances in SFF and powder metallurgy (P/M) techniques, with the ability to fine tune material properties, may soon make it possible to produce monolithic, thermally robust RF structures faster and cheaper than ever before.

Frigola, Pedro↗

Embedded Sensors and Controls to Improve Component Performance and Reliability -- Bench-scale Testbed Design Report

Embedded instrumentation and control systems that can operate in extreme environments are challenging due to restrictions on sensors and materials. As a part of the Department of Energy's Nuclear Energy Enabling Technology cross-cutting technology development programs Advanced Sensors and Instrumentation topic, this report details the design of a bench-scale embedded instrumentation and control testbed. The design goal of the bench-scale testbed is to build a re-configurable system that can rapidly deploy and test advanced control algorithms in a hardware in the loop setup. The bench-scale testbed will be designed as a fluid pump analog that uses active magnetic bearings to support the shaft. The testbed represents an application that would improve the efficiency and performance of high temperature (700 C) pumps for liquid salt reactors that operate in an extreme environment and provide many engineering challenges that can be overcome with embedded instrumentation and control. This report will give details of the mechanical design, electromagnetic design, geometry optimization, power electronics design, and initial control system design.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Multi-Mode Cavity Accelerator Structure

This project aimed to develop a prototype for a novel accelerator structure comprising coupled cavities that are tuned to support modes with harmonically-related eigenfrequencies, with the goal of reaching an acceleration gradient >200 MeV/m and a breakdown rate <10 -7 /pulse/meter. Phase I involved computations, design, and preliminary engineering of a prototype multi-harmonic cavity accelerator structure; plus tests of a bimodal cavity. A computational procedure was used to design an optimized profile for a bimodal cavity with high shunt impedance and low surface fields to maximize the reduction in temperature rise ΔT. This cavity supports the TM010 mode and its 2nd harmonic TM011 mode. Its fundamental frequency is at 12 GHz, to benchmark against the empirical criteria proposed within the worldwide High Gradient collaboration for X-band copper structures; namely, a surface electric field E sur max < 260 MV/m and pulsed surface heating ΔT max < 56 °K. With optimized geometry, amplitude and relative phase of the two modes, reductions are found in surface pulsed heating, modified Poynting vector, and total RF power—as compared with operation at the same acceleration gradient using only the fundamental mode.

43 PARTICLE ACCELERATORS↗

Determination of Vanadium Binding Mode on Seawater-Contacted Polyamidoxime Adsorbents

Adsorbents developed for the recovery of uranium from seawater display poor selectivity over other transition metals present in the ocean, with vanadium particularly problematic. To improve selectivity, an indispensable step is the positive identification of metal binding environments following actual seawater deployment. In this work we apply x-ray absorption fine structure (XAFS) spectroscopy to directly investigate the vanadium binding environment on seawater-deployed polyamidoxime adsorbents. Comparison of the x-ray absorption near edge spectra (XANES) reveal marked similarities to recently a reported non-oxido vanadium (V) structure formed upon binding with cyclic imidedioxime, a byproduct of generating amidoxime functionalities. Density functional theory (DFT) calculations provided a series of putative vanadium binding environments for both vanadium (IV) and vanadium (V) oxidation states, and with both amidoxime and cyclic imidedioxime. Fits of the extended XAFS (EXAFS) data confirmed vanadium (V) is bound exclusively by the cyclic imidedioxime moiety in a 1:2 metal:ligand fashion, though a modest structural distortion is also observed compared to crystal structure data and computationally optimized geometries which is attributed to morphology effects from the polymer graft chain and the absence of crystal packing interactions. These results demonstrate that improved selectivity for uranium over vanadium can be achieved by suppressing the formation of cyclic imidedioxime during preparation of polyamidoxime adsorbents for seawater uranium recovery.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

PHOENIX Electrostatic Design

PHOENIX (Portable, High-efficiency, Optimal ENergy Imaging X-rays) is a quasi-DC, electrostatic, vacuum-diode designed as a portable x-ray source with national defense and commercial applications. The patent-pending PHOENIX concept combines a megavoltage, Cockroft-Walton voltage multiplier with a Van de-Graaff electrostatic charge-storage dome to create a vacuum-diode suitable for x-ray production. Naturally this structure must minimize internal electric fields to reduce electrical breakdown while simultaneously reducing size and weight to enhance portability. In this paper we describe the optimization process and model results obtained using the COMSOL multi-physics code. We describe three models: a prototype model built to demonstrate the PHOENIX concept as part of Laboratory Directed Research and Development (LDRD) Mission Foundation Research (MFR) Phase-I , a “back-of-the-envelope” design used as a starting point for further COMSOL optimization, and finally, the optimized geometry implemented in the MFR Phase-II. In all cases compromises resulting from cost, schedule, and manufacturing constraints were taken into account as the design progressed.

42 ENGINEERING↗

Biopolymer Concrete

Cement production for concrete has been responsible for ~7–8% of global greenhouse gas (GHG) emissions, and nearly equally contribution for steel production processes (EPA, 2020). In order to achieve carbon neutrality by 2050, a novel solution has to be investigated. This project aims to develop fundamental mechanistic understanding and experimental characterization to create a 3D printable biopolymer concrete using plant-based polyurethane as an innovative and sustainable alternative for Portland cement concrete, with significantly low carbon footprint. Future construction will utilize the advances in digital additive manufacturing (3D printing) to produce optimal geometries with a minimum waste of materials. Understanding the polymerization process, factors impacting the composite rheology, and the structural behavior of this biopolymer concrete will enable us to engineer the next generation of concrete structures with low carbon footprint. This project aims to improve the nation’s ability to control Greenhouse Gas emission neutrality for the set goal of 2050 via introducing a structurally viable bio-based polymer concrete.

42 ENGINEERING↗

Feature Based Qualification of 17-4PH Stainless Steel to Evaluate Location-Specific Variability in Wire Arc Additive Manufacturing

Qualifying large-scale metal additive manufacturing (M-AM) technologies such as wire arc additive manufacturing (WAAM) can be challenging. This is especially significant in precipitation hardened martensitic stainless steels like SS 17-4PH, where thermal histories induce location-specific microstructural variability and property anisotropy. The Department of Defense (DOD) and the United States Army Combat Capabilities Development Command Ground Vehicle Systems Center (GVSC) Ground Vehicle Materials Engineering (GVME) aim to build robust and qualified large-scale M-AM workflows that could reduce the time and cost through quick and informed evaluation, testing, and development of feedstock, processes, and parts. The report presents the findings from the collaborative efforts between Oak Ridge National Laboratory (ORNL) and the U.S. Army GVSC GVME. The aim of this project was to develop a geometric feature-based qualification framework for WAAM of SS 17-4PH components. This report outlines selection methodology of representative build geometries, optimization of WAAM process parameters, in-situ monitoring, microstructure-property evaluation, thermal simulations, as well as data visualization techniques incorporated in this project. The results from this project demonstrate a clear understanding of thermal history dependent phase evolution and consequent location-specific property variations in WAAM of SS 17-4PH. These results in conjunction with the data-driven methodologies used in this project are expected to reduce qualification timelines, improve predictability, and accelerate the development of reliable feature-based qualification strategies for part production via large-scale M-AM technologies.

36 MATERIALS SCIENCE↗

591 MHz SRF Cavity Design for the EIC ESR

The Electron-Ion Collider (EIC) is a next generation particle accelerator to be built at Brookhaven National Laboratory, in partnership with Thomas Jefferson National Accelerator Facility. The Electron Storage Ring (ESR) of RIC requires a 10 MW RF storage system to restore beam power lost by a 2.5 A electron beam. The RF system will use 18 single-cell 591 MHz Superconducting RF (SRF) cavities. Effective damping of higher-order-modes (HOMs) is critical to ensure beam stability. This paper presents the design of the single-cell 591 MHz cavity, including cavity geometry optimization, multipacting evaluation, and HOM damping analysis.

43 PARTICLE ACCELERATORS↗

Singlet Fission

This report summarizes key findings from DOE Award DE‑SC0007004 – Singlet Fission, documenting more than a decade of research led by Professor Josef Michl. The project advanced foundational understanding of singlet fission (SF) through integrated synthetic, spectroscopic, crystallographic, and computational studies. Across a diverse set of chromophores—including tetracenes, cibalackrot derivatives, BODIPY dimers, TDPPs, and fluorinated isobenzofurans—the team identified structural and packing features that enable or inhibit SF, clarified the roles of charge‑transfer intermediates and excimer formation, and developed simplified theoretical models and computational screening tools for predicting optimal geometries and excited‑state-energetics. The work significantly broadened design principles for SF‑active materials and provided insights relevant to next‑generation solar energy conversion and molecular photophysics.

14 SOLAR ENERGY↗

Investigation of the Effect of Framework Flexibility on Adsorption in SIFSIX-3-Cu using a Machine-Learned Force Field

Metal-organic frameworks (MOFs) are a promising class of adsorbents. The performance of MOF sorbents relies on high selectivity and low regeneration energy. This work focuses on the use of machine learned force fields (MLFFs) to model adsorption in a flexible MOF, SIFSIX-3-Cu. A DeePMD-based MLFF was trained to reproduce DFT (PBE+D3) energies, forces, and stresses, using an iterative sampling scheme combining sampling based on molecular dynamics, Monte Carlo, and geometry optimization to capture both attractive and repulsive regions of the potential energy surface. Flexibility of the MOF was explicitly included in this model. Hybrid Monte Carlo/molecular dynamics (MC/MD) simulations using the MLFF predicted adsorption isotherms in good agreement with experimental data for a range of pressures (40 Pa – 104 Pa) in contrast to rigid models, which overpredict CO2 adsorption at low pressures. The improvement was the result of a description of the variability of fluorine-fluorine diagonal distances at adsorption sites. This detailed description of flexibility afforded by the MLFF resulted in more accurate predictions adsorption isotherms when compared to the experimentally measured values. These results underscore the importance of including framework flexibility when modeling adsorption phenomena in MOFs, particularly for low pressure applications and provide a robust procedure for training MLFF models for MOFs.

Atomistic Simulation↗

Hydrated Metal and Metal-Nitrate Complexes in Water: Full Lanthanide(III) Series plus Miscellaneous Metal Ions

This is a dataset of hydrated metal complexes and metal–nitrate hydrated complexes intended for public use, reproducibility, and downstream structural analysis. A key feature is coverage across the full lanthanide(III) series (La–Lu), enabling systematic comparisons of coordination motifs and bonding trends across the entire lanthanide sequence. In addition to the lanthanides, the dataset also includes other metal ions such as UO2(VI), Fe(II), and Fe(III). The dataset provides optimized geometries for hydrated and nitrate-containing hydrated complexes, together with representative ab initio molecular dynamics (AIMD) trajectories saved in standard XYZ formats. The accompanying NWChem input decks enable reproduction of the reported calculations and provide a starting point for extending the simulations to related coordination environments. Computationally, DFT calculations employ the B3LYP functional with DFT-D3BJ dispersion corrections and a COSMO continuum solvent model (dielectric constant 78.4) to represent solvation beyond the explicitly treated first hydration shell. AIMD simulations are performed with the NWChem qmd module at 298 K, integrating nuclear motion with the velocity-Verlet algorithm and controlling temperature using a Nosé–Hoover thermostat. Trajectories are approximately 4.8 ps in length and are used primarily to assess short-time stability of candidate coordination motifs, including (for lanthanides) differences between 8- versus 9-water coordination and comparisons between nitrate-bound and nitrate-free hydrated complexes.

Dinpajooh, Mohammadhasan [Pacific Northwest Nation↗

The electronic structure and catalytic properties of molybdenum sulfides in the coal hydrogenation process

Comparative analysis of the electronic structure of molybdenum sulfides and their catalytic activity in hydrogenation reactions was performed from the results of Hartree-Fock ab initio quantum-chemical calculations using the STO 3-21G and 6-311G basis sets with geometry optimization. The model reactions of hydrogenation of aromatic and saturated hydrocarbons with hydrogen and hydrogen sulfide were studied. It was shown that the hydrogenation reactions of aromatic hydrocarbons with hydrogen sulfide must occur at a higher rate (with lower activation energy) as compared to those with molecular hydrogen.

01 COAL, LIGNITE, AND PEAT↗

Numerical Investigation of Butterfly Valve Performance in Variable Valve Sizes, Positions and Flow Regimes

Reliability and efficiency of valves are necessary for precise control and sufficient heat-flow to heat application plants for the integrated energy systems of nuclear power plants (NPPs). Strategic Management Analysis Requirement and Technology (SMART) valves’ ability to control flow and assess environmental parameters stands out for these requirements. Their ability to sustain the downstream flow rate, prevent reverse flow, and maintain pressure in the heat transport loop is much more efficient with the integration of sensors and intelligent algorithms. For assessing valve performance and monitoring, mechanical design and operating conditions are two important parameters. In this study, the butterfly valves of three different sizes are simulated with water and steam using STAR-CCM+ in various flow regimes and positions to analyze performance parameters to strategize an automated control system for efficiently balancing the heat–transport network. Also, flow behavior is studied using velocity and pressure fields for valve–body geometry optimization. It can be observed, through performance parameters, that the valves are suitable for operation between 30° and 90° positions with significantly low loss coefficients and high flow coefficients, and the performance parameters follow a certain pattern in both water and steam flow in each scenario.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗