Search NASA⌕ Search

SEARCH · Search NASA

Results for “harmonic analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Application of higher harmonic blade feathering for helicopter vibration reduction

Higher harmonic blade feathering for helicopter vibration reduction is considered. Recent wind tunnel tests confirmed the effectiveness of higher harmonic control in reducing articulated rotor vibratory hub loads. Several predictive analyses developed in support of the NASA program were shown to be capable of calculating single harmonic control inputs required to minimize a single 4P hub response. In addition, a multiple-input, multiple-output harmonic control predictive analysis was developed. All techniques developed thus far obtain a solution by extracting empirical transfer functions from sampled data. Algorithm data sampling and processing requirements are minimal to encourage adaptive control system application of such techniques in a flight environment.

Powers, R. W.↗

Noise produced by turbulent flow into a rotor: Theory manual for noise calculation

An analysis is presented for the calculation of noise produced by turbulent flow into a helicopter rotor. The method is based on the analysis of Amiet for the sound produced by an airfoil moving in rectilinear motion through a turbulent flow field. The rectilinear motion results are used in a quasi-steady manner to calculate the instantaneous spectrum of the rotor noise at any given rotor position; the overall spectrum is then found by averaging the instantaneous spectrum over all rotor azimuth angles. Account is taken of the fact that the rotor spends different amounts of retarded time at different rotor positions. Blade to blade correlation is included in the analysis, leading to harmonics of blade passing frequency. The spectrum of the turbulence entering the rotor is calculated by applying rapid distortion theory to an isotropic turbulence spectrum, assuming that the turbulence is stretched as it is pulled into the rotor. The inputs to the program are obtained from the atmospheric turbulence model and mean flow distortion calculation, described in another volume of this set of reports. The analytical basis is provided for a module which was incorporated in NASA's ROTONET helicopter noise prediction program.

Amiet, R. K.↗

Effects of higher harmonic control on rotor performance and control loads

An analytical study, based on an advanced Higher Harmonic Control (HHC) analysis for helicopter rotor systems, is carried out to investigate HHC application for rotor performance enhancement. The effects of HHC on stall characteristics of rotor and blade pitch-link loads when the system is configured to suppress vibration are also examined. For vibration control, simulated results indicate that HHC may promote early blade stall. Effects of blade torsion frequencies on HHC performance are moderate, and torsionally stiff blades require less actuator power than torsionally soft blades. For rotor performance improvement, a 3 to 5 percent reduction in rotor shaft power can be achieved with 2 deg of two-per-rev blade pitch control.

Nguyen, Khanh↗

Feed-forward control of gear mesh vibration using piezoelectric actuators

This paper presents a novel means for suppressing gear mesh-related vibrations. The key components in this approach are piezoelectric actuators and a high-frequency, analog feed-forward controller. Test results are presented and show up to a 70-percent reduction in gear mesh acceleration and vibration control up to 4500 Hz. The principle of the approach is explained by an analysis of a harmonically excited, general linear vibratory system.

Montague, Gerald T.↗

Ocean Surface Vector Wind: Research Challenges and Operational Opportunities

The atmosphere and ocean are joined together over seventy percent of Earth, with ocean surface vector wind (OSVW) stress one of the linkages. Satellite OSVW measurements provide estimates of wind divergence at the bottom of the atmosphere and wind stress curl at the top of the ocean; both variables are critical for weather and climate applications. As is common with satellite measurements, a multitude of OSVW data products exist for each currently operating satellite instrument. In 2012 the Joint Technical Commission on Oceanography and Marine Meteorology (JCOMM) launched an initiative to coordinate production of OSVW data products to maximize the impact and benefit of existing and future OSVW measurements in atmospheric and oceanic applications. This paper describes meteorological and oceanographic requirements for OSVW data products; provides an inventory of unique data products to illustrate that the challenge is not the production of individual data products, but the generation of harmonized datasets for analysis and synthesis of the ensemble of data products; and outlines a vision for JCOMM, in partnership with other international groups, to assemble an international network to share ideas, data, tools, strategies, and deliverables to improve utilization of satellite OSVW data products for research and operational applications.

Joint Technical Commission on Oceanography and Mar↗

The anomaly of the CMB power with the latest Planck data

Abstract The lack of power anomaly is an unexpected feature observed at large angular scales in the maps of Cosmic Microwave Background (CMB) produced by the COBE, WMAP andPlancksatellites. This signature, which consists in a missing of power with respect to that predicted by the ΛCDM model, might hint at a new cosmological phase before the standard inflationary era.The main point of this paper is taking into account the latestPlanckpolarisation data to investigate how the CMB polarisation improves the understanding of this feature. With this aim, we apply to the latestPlanckdata, both PR3 (2018) and PR4 (2020) releases, a new class of estimators capable of evaluating this anomaly by considering temperature and polarisation data both separately and in a jointly way. This is the first time that the PR4 dataset has been used to study this anomaly. To critically evaluate this feature, taking into account the residuals of known systematic effects present in thePlanckdatasets, we analyse the cleaned CMB maps using different combinations of sky masks, harmonic range and binning on the CMB multipoles.Our analysis shows that the estimator based only on temperature data confirms the presence of a lack of power with a lower-tail-probability (LTP), depending on the component separation method, ≤ 0.33% and ≤ 1.76% for PR3 and PR4, respectively. To our knowledge, the LTP≤ 0.33% for the PR3 dataset is the lowest one present in the literature obtained fromPlanck2018 data, considering thePlanckconfidence mask. We find significant differences between these two datasets when polarisation is taken into account most likely due to a different level of systematics. Especially, the analysis with PR3 data, unlike that with PR4, seems to point towards a lack of power at large scales also for polarisation.Moreover, we also show that for the PR3 dataset the inclusion of the subdominant polarisation information provides estimates that are less likely accepted in a ΛCDM cosmological model than the only-temperature analysis over the entire harmonic-range considered. In particular, at ℓ max = 26, we found that no simulation has a value as low as the data for all the pipelines.

Astronomy & Astrophysics↗

Mechanistic understanding of catalytic conversion of ethanol to 1-butene over 2D-pillared MFI zeolite

Ethanol is an important C2 platform molecule for producing value-added chemicals and distillate hydrocarbon fuels (e.g., jet and diesel). Among these, catalytic upgrading of ethanol to butenes can generate valuable commodity chemicals (e.g., 1-butene) and provide C4 olefin intermediates that can be further upgraded to jet/diesel fuels. 2D zeolites offer hierarchical mesoporous structures, leading to improved mass transport and reduced diffusion length, which can help to address the coking challenges faced by ethanol conversion to hydrocarbons over 3D zeolites. In this study, we investigate the acid-catalyzed conversion of ethanol to 1-butene over the Brønsted acid sites (BAS) in 2D-pillared MFI zeolite (2D-PMFI) using ab initio molecular dynamics (AIMD) simulations, in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), and calorimetric measurements. A detailed thermodynamic analysis, using quasi-harmonic approximation (QHA), on the Gibbs free energy pathway of ethanol conversion shows that the consideration of entropy is critical to accurately capture the detailed thermodynamic profiles. The formation of bulky ethoxy-ethene complex is found to be a potential rate-determining step (RDS), proceeding via stepwise mechanism. The reactivity of 2D-PMFI can be further tuned by manipulating RDS through a careful control of number of BAS and operating temperatures. The accuracy of computational model is confirmed through the comparison of calculated vibrational density of states (VDOS) against the experimental DRIFTS measurements. Overall, our study provides mechanistic insights into ethanol upgrading over the 2D-PMFI and shows the importance of evaluating entropic effects in such confined system.

Ethanol conversion, 2D-pillared zeolite, MFI, Anha↗

Analytical and numerical modeling of optical second harmonic generation in anisotropic crystals using #SHAARP package

Electric-dipole optical second harmonic generation (SHG) is a second-order nonlinear process that is widely used as a sensitive probe to detect broken inversion symmetry and local polar order. Analytical modeling of the SHG polarimetry of a nonlinear optical material is essential to extract its point group symmetry and the absolute nonlinear susceptibilities. Current literature on SHG analysis involves numerous approximations and a wide range of (in)accuracies. We have developed an open-source package called the Second Harmonic Analysis of Anisotropic Rotational Polarimetry (#SHAARP.si) which derives analytical and numerical solutions of reflection SHG polarimetry from a single interface (.si) for bulk homogeneous crystals with arbitrary symmetry group, arbitrary crystal orientation, complex and anisotropic linear dielectric tensor with frequency dispersion, a general SHG tensor and arbitrary light polarization. #SHAARP.si enables accurate modeling of polarimetry measurements in reflection geometry from highly absorbing crystals or wedge-shaped transparent crystals. The package is extendable to multiple interfaces.

36 MATERIALS SCIENCE↗

Analysis of Interactions between Drifting Plasma Waves in 2DEG Semiconductors and Electromagnetic Space Harmonic Waves using Three-Dimensional Transverse Magnetic Mode Method

A theoretical three-dimensional transverse magnetic (TM) mode analysis to describe the presence of interactions between surface plasma waves of carriers in a two-dimensional electron gas (2DEG) at AlGaAs/GaAs heterostructure and electromagnetic space harmonics slow waves using the so-called interdigital-gated high-electron-mobility-transistor (HEMT) plasma wave devices is presented. First, the device structure and the outline of theoretical formulation to determine the admittance of the interdigital structure are described. Then, the analysis of the space harmonics propagating through the interdigital slow-wave structures is performed. Next, the numerical procedures to solve the integral equations which are used in determining the admittance are explained. Finally, we point out and discuss the main results of the theoretical analysis where an appearance of negative conductance is obtained.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Polarisation analysis of optimal conditions for stationary second-harmonic generation in a solid-state laser

The Jones matrix method is used to study the optimal conditions for steady-state generation through intracavity frequency conversion in a solid-state laser under type-II phase matching based on a weakly anisotropic model of an active medium (amplitude and phase anisotropy) and a nonlinear element. The optimal rotation angles of the nonlinear element are found. (nonlinear optical phenomena)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Spectral and dynamical analysis of a single vortex ring in anisotropic harmonically trapped three-dimensional Bose-Einstein condensates

Here in the present work, motivated by numerous recent experimental developments we revisit the dynamics of a single vortex ring in anisotropic harmonic traps. At the theoretical level, we start from a general Lagrangian dynamically capturing the evolution of a vortex ring and not only consider its spectrum of linearized excitations, but also explore the full nonlinear dynamical evolution of the ring as a vortical filament. The theory predicts that the ring is stable for 1 ≤ λ ≤ 2, where λ = ω z /ω r is the ratio of the trapping frequencies along the z and r axes, i.e., for spherical to slightly oblate condensates. We compare this prediction with direct numerical simulations of the full three-dimensional Gross-Pitaevskii equation (GPE) capturing the linearization spectrum of the ring for different values of the chemical potential and as a function of the anisotropy parameter λ . We identify this result as being only asymptotically valid as the chemical potential μ → ∞, revealing how the stability interval narrows and, in particular, its upper bound decreases for finite μ. Finally, we compare at the dynamical level the results of the GPE with the ones effectively capturing the ring dynamics, revealing the unstable evolution for different values of λ, as well as the good agreement between the two.

74 ATOMIC AND MOLECULAR PHYSICS↗

Linear analysis of an axially grooved rectangular gyrotron for harmonic operation

In an axially grooved rectangular waveguide the linearized Vlasov equation is solved to find the perturbed distribution function resulting from the electromagnetic forces on the electrons. The resulting beam current and the propagating electromagnetic waves of the cold tube are used in the inhomogeneous Maxwell's equation to derive the general dispersion equation. This equation is then transformed into the electron beam frame and the resulting linear growth rate of amplification is calculated. By maximizing the linear growth rate, the operational parameters of the gyrotron are then optimized.

Ferendeci, A. M.↗

Multi-electrode Harmonized Kingdon Traps

Based on the analysis of the results of the study of various designs of multi-electrode harmonized Kingdon traps, we propose a new type of trap with two merged internal electrodes that has the ability to capture and accumulate ions formed inside. We also investigated the influence of inaccuracies in the manufacture of the electrodes on the field inside such trap. The four-electrode trap, which actually degenerates into a two-electrode device with traces of two other electrodes present at the ends of the internal electrodes (their splitting) has been found as the less sensitive to inaccuracies caused by manufacturing and cutting the ends of trap electrodes. We show that a mass spectrometer with a relatively high resolving power can be created on the basis of such a trap. The creation of the traps requires the manufacture of complex electrodes with demanded accuracy of their surfaces. This becomes possible with the advent of 3D printers. .

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Data Acquisition in a High Harmonic Generation Lab and at LCLS

In this paper, we examine data acquisition in a high harmonic generation (HHG) lab and preliminary data analysis with the Cyclohexadiene Collaboration at the Linac Coherent Lightsource (LCLS) at SLAC National Accelerator Laboratory. HHG experiments have a large number of parameters that need to be monitored constantly. In particular, the pressure of the target is critical to HHG yield. However, this pressure can fluctuate wildly and without a tool to monitor it, it is difficult to analyze the correlation between HHG yield and the pressure. I used the Arduino microcontroller board and created a complementary MATLAB graphical user interface (GUI), thereby enhancing the ease with which users can acquire time-stamped parameter data. Using the Arduino, it is much easier to match the pressure to the corresponding HHG yield. Collecting data by using the Arduino and the GUI is flexible, user-friendly, and cost-effective. In the future, we hope to be able to control and monitor parts of the lab with the Arduino alone. While more parameter information is needed in the HHG lab, we needed to reduce the amount of data during the cyclohexadiene collaboration. This was achieved by sorting the data into bins and filtering out unnecessary details. This method was highly effective in that it minimized the amount of data without losing any valuable information. This effective preliminary data analysis technique will continue to be used to decrease the size of the collected data.

43 PARTICLE ACCELERATORS↗

Geometric aspects of the non-extensive statistical theory

The family of Tsallis entropies was introduced by Tsallis in 1988. The Shannon entropy belongs to this family as the limit case q{yields}1. The canonical distributions in R{sup n} that maximize this entropy under a covariance constraint are easily derived as Student-t (q<1) and Student-r (q>1) multivariate distributions. A nice geometrical result about these Student-r distributions is that they are marginal of uniform distributions on a sphere of larger dimension d with the relationship p = n+2+(2/q-1). As q{yields}1, we recover the famous Poincare's observation according to which a Gaussian vector can be viewed as the projection of a vector uniformly distributed on the infinite dimensional sphere. A related property in the case q<1 is also available. Often associated to Renyi-Tsallis entropies is the notion of escort distributions. We provide here a geometric interpretation of these distributions. Another result concerns a universal system in physics, the harmonic oscillator: in the usual quantum context, the waveform of the n-th state of the harmonic oscillator is a Gaussian waveform multiplied by the degree n Hermite polynomial. We show, starting from recent results by Carinena et al., that the quantum harmonic oscillator on spaces with constant curvature is described by maximal Tsallis entropy waveforms multiplied by the extended Hermite polynomials derived from this measure. This gives a neat interpretation of the non-extensive parameter q in terms of the curvature of the space the oscillator evolves on; as q{yields}1, the curvature of the space goes to 0 and we recover the classical harmonic oscillator in R{sup 3}.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dark energy survey year 3 results: cosmology from galaxy clustering and galaxy–galaxy lensing in harmonic space

We present the joint tomographic analysis of galaxy-galaxy lensing and galaxy clustering in harmonic space (HS), using galaxy catalogues from the first three years of observations by the Dark Energy Survey (DES Y3). We utilize the redMaGiC and MagLim catalogues as lens galaxies and the metacalibration catalogue as source galaxies. The measurements of angular power spectra are performed using the pseudo-$C_\ell$ method, and our theoretical modelling follows the fiducial analyses performed by DES Y3 in configuration space, accounting for galaxy bias, intrinsic alignments, magnification bias, shear magnification bias and photometric redshift uncertainties. We explore different approaches for scale cuts based on non-linear galaxy bias and baryonic effects contamination. Our fiducial covariance matrix is computed analytically, accounting for mask geometry in the Gaussian term, and including non-Gaussian contributions and super-sample covariance terms. To validate our HS pipelines and covariance matrix, we used a suite of 1800 log-normal simulations. We also perform a series of stress tests to gauge the robustness of our HS analysis. In the $\Lambda$CDM model, the clustering amplitude $S_8 =\sigma _8(\Omega _m/0.3)^{0.5}$ is constrained to $S_8 = 0.704\pm 0.029$ and $S_8 = 0.753\pm 0.024$ (68 per cent C.L.) for the redMaGiC and MagLim catalogues, respectively. For the wCDM, the dark energy equation of state is constrained to $w = -1.28 \pm 0.29$ and $w = -1.26^{+0.34}_{-0.27}$, for redMaGiC and MagLim catalogues, respectively. These results are compatible with the corresponding DES Y3 results in configuration space and pave the way for HS analyses using the DES Y6 data.

(cosmology:) cosmological parameters↗