Study of high voltage solar array configurations with integrated power control electronics
Solar array electrical configurations for voltage regulation
Ebersole, T.↗
SEARCH · Search NASA
Results for “high voltage”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
High voltage protection network
Circuit protects technical personnel and test equipment from hazardous currents conducted through safety barriers and into data acquisition equipment. Network isolates energy source, restricts arcing to remote area, and dissipates harmlessly residual energy transient.
Cambra, J. M.↗
Current drainage to a high voltage probe in a dilute plasma.
The current drainage from a plasma through approximately 0.05 cm diameter holes in Kapton H polymide film, FEP type C, and quartz (7940 Corning glass) placed on a probe at voltages up to 2000 volts dc have been determined both analytically and experimentally. A Laplace field was used to numerically predict an upper limit for the drainage current. The measured current was less than the calculated current for the FEP and quartz, and the two were approximately in agreement for Kapton H. The measured currents were on the order of 5 microamperes with the calculated currents on the order of 10 microamperes.
Grier, N. T.↗
Ionizing potential waves and high-voltage breakdown streamers.
The structure of ionizing potential waves driven by a strong electric field in a dense gas is discussed. Negative breakdown waves are found to propagate with a velocity proportional to the electric field normal to the wavefront. This causes a curved ionizing potential wavefront to focus down into a filamentary structure, and may provide the reason why breakdown in dense gases propagates in the form of a narrow leader streamer instead of a broad wavefront.
Albright, N. W.↗
Injector for use in high voltage isolators for liquid feed lines
An improved injector is described for use in introducing fluid substances into feed lines employed in delivering flowing bodies of liquids. The injector includes a porous plug, concentrically related to a feed line, including an internally tapered surface of a truncated conical configuration with an inlet orifice of a first diameter substantially smaller than the first diameter and an external surface circumscribed by an annular chamber containing a body of insulating gas.
Snyder, J. A.↗
Skylab high voltage electrical/electronic systems corona assessment.
Six significant design parameters which must be considered in the corona assessment include the operating voltage, radio frequency power, the 'pressure times spacing' relation, operating temperature, gases and contaminants in the environment, and configuration and field gradients. An equipment and experiments survey is presented, giving attention to corona-free equipment and equipment requiring detailed investigations.
Dunbar, W. G.↗
High voltage power Schottky diodes
Calculations of the low frequency rectification efficiency of power Schottky diodes show that silicon Schottky rectifiers have lower losses than silicon p-n junctions for all voltage applications up to approximately 150 volts. These calculations are presented. Large area Schottky diodes have been fabricated which exhibit near ideal reverse leakage at 100 C out to approximately 100 volts and which have current capability of 100 A. Fabrication details and performance data are presented.
Cordes, L. F.↗
Methods for testing high voltage connectors in vacuum, measurements of thermal stresses in encapsulated assemblies, and measurement of dielectric strength of electrodes in encapsulants versus radius of curvature
Internal embedment stress measurements were performed, using tiny ferrite core transformers, whose voltage output was calibrated versus pressure by the manufacturer. Comparative internal strain measurements were made by attaching conventional strain gages to the same type of resistors and encapsulating these in various potting compounds. Both types of determinations were carried out while temperature cycling from 77 C to -50 C.
Bever, R. S.↗
High-voltage capacitor-coupling circuit
Inexpensive scheme for photomultipliers reduces capacitor-generated noise susceptibility.
Frame, W. W.↗
High voltage compliance constant current ballast
A ballast circuit employing a constant current diode and a vacuum tube that can provide a constant current over a voltage range of 1000 volts. The simple circuit can prove useful in studying voltage breakdown characteristics.
Rosenthal, L. A.↗
Conductivity effects in high-voltage spacecraft insulating materials
Laboratory measurements were performed to assess the influence of various external parameters on the conductivity properties of several typical and potential spacecraft insulating materials in a simulated space environment. The materials tested include Kapton, Teflon, quartz, and polyvinylidene fluoride. The parameters measured comprise sample thickness, temperature, applied voltage, illumination intensity and wavelength, and electron beam energy and current density. All tests were conducted in a vacuum chamber at a pressure of about one millionth Torr both with conventional optically-transparent gold front-surface electrodes and with the front surfaces of the test samples exposed directly to an electron beam. The data presented illustrate some of the complexities in electrical characteristics exhibited by the materials as a result of interactions with various conditions of their environment.
Adamo, R. C.↗
Ultrasonic evaluation of high-voltage circuit boards
Ultrasonic transmission technique, using reflector plate, indicates resistance to corona formation. Technique is useful as tool for mapping specific panels to permit selecting best areas of laminate for circuit board use. Procedure is relatively safe, fast, inexpensive, and uses commercially-available equipment.
Klima, S. J.↗
Power loss for high-voltage solar-cell arrays
Electric field particle collection and power loss are calculated in program written in FORTRAN IV for use on UNIVAC 1100/40 computer. Program incorporates positive and negative and negative charge flows and balance between positive and negative flows is performed by iteration.
Parker, L. W.↗
Investigation of high voltage spacecraft system interactions with plasma environments
An experimental investigation was undertaken for insulator and conductor test surfaces biased up to + or - 1kV in a simulated low earth orbit charged particle environment. It was found that these interactions are controlled by the insulator surfaces surrounding the biased conductors. For positive applied voltages the electron current collection can be enhanced by the insulators. For negative applied voltages the insulator surface confines the voltage to the conductor region. Understanding these interactions and the technology to control their impact on system operation is essential to the design of solar cell arrays for ion drive propulsion applications that use direct drive power processing.
Stevens, N. J.↗
High-voltage electron microscope observations of finely divided iron droplets in glassy agglutinates
Explore the source record for details and available documents.
Pillinger, C. T.↗
Electrical power loss from high-voltage power circuits through plasma leakage
Methods are proposed for constructing a solar power satellite system which would decrease electric current leakage through plasma.
Oman, H.↗
NASCAP modelling of high-voltage power system interactions with space charged-particle environments
The NASA Charging Analyzer Program (NASCAP), an engineering tool capable of analyzing the impact of the charged particle environment on spacecraft surfaces and systems, is described. NASCAP is a quasi-static computational program which analyzes the charging of a 3-dimensional complex body as a function of time and system-generated voltages for given space environmental conditions. The material properties of the surfaces are taken into account; the surface potentials, low energy sheath, potential distribution in space and particle trajectories are calculated. An application of NASCAP to a simple space solar power station consisting of two 6 m by 18 m solar array wings surrounding a central body is presented. Each solar array wing is considered to be divided into three regions operating at 2000 volts. Results of NASCAP analysis of the system for a normal environment and a moderate geomagnetic substorm environment are discussed.
Stevens, N. J.↗
Interaction of high voltage surfaces with the space plasma
Tests were conducted using plasma densities of approximately 10 to the 5th power - 10 to the 6th power/cu cm. Insulating materials tested were polyimide (Dapton), mica and glass. Surface-area effects were found to be substantially reduced from those previously reported at lower plasma densities. The difference in typical plasma density was felt to be the major cause of this change, although a saturation effect may also be involved. At the 10 to the 5th power/cu cm plasma density range, surface effects on collection current appear limited to roughly 1 cm from the hole. A factor of several reduction of collected current was obtained with both surface scribing and a 2 x 2 cm conducting mesh. It appears possible that the effects of surface treatment might be more significant at lower plasma densities. Effects of repeated tests were also noted, with current collection decreasing with successive tests. Depending on the materials involved, the effect appeared due to either the smoothing of the inside of the insulator hole or the sputtering of insulator on the exposed conductor. A general conclusion was made from a variety of observations, that the generation of vapor is a major factor in the enhancement of collected current.
Kaufman, H. R.↗